Search found 464 matches
- Sun Feb 28, 2021 1:59 pm
- Forum: General Discussion Forum
- Topic: You Get What You Pay For
- Replies: 38
- Views: 4972
Re: You Get What You Pay For
I think usually the trouble with gas is the condition of the tanks at the station?? Up north in the winter you can have trouble but if you get bad gas it will show up quickly and you will know where you bought it!! Down south you can go until you hit freezing before you might spot poor quality fuel!...
- Tue Feb 23, 2021 8:18 pm
- Forum: General Discussion Forum
- Topic: Transmission Inspection Cover, Plexiglass.
- Replies: 12
- Views: 2738
Re: Transmission Inspection Cover, Plexiglass.
About 20 years ago!! Bud.
- Mon Feb 22, 2021 10:44 am
- Forum: General Discussion Forum
- Topic: This story involves a Vanderbilt cup racer, Thomas Flyers, and a lowly Ford. It's going to take some time.....
- Replies: 27
- Views: 3234
Re: This story involves a Vanderbilt cup racer, Thomas Flyers, and a lowly Ford. It's going to take some time.....
This story of the owners and the garage man remind me of the old book Dim Thunder!! Thank you Sir!!! Bud.
- Sun Feb 21, 2021 9:05 am
- Forum: General Discussion Forum
- Topic: 100 Model T Ford and Forum - Old Movie Cartoons
- Replies: 40
- Views: 3020
Re: 100 Model T Ford and Forum - Old Movie Cartoons
Wow!!! Thanks ever so much!!! Bud. Member of the two piece club!
- Sat Feb 20, 2021 2:17 pm
- Forum: General Discussion Forum
- Topic: What to you, gives a Model T its charm?
- Replies: 72
- Views: 8575
Re: What to you, gives a Model T its charm?
I like the brass radiator and the coils! Bud.
- Sat Feb 20, 2021 12:46 pm
- Forum: General Discussion Forum
- Topic: This story involves a Vanderbilt cup racer, Thomas Flyers, and a lowly Ford. It's going to take some time.....
- Replies: 27
- Views: 3234
Re: This story involves a Vanderbilt cup racer, Thomas Flyers, and a lowly Ford. It's going to take some time.....
The Thomas car was very high quality but with a crash box trans??? I think there were many planetary trans of the time but Ford was the best to handle the power of the racer?? Thank you sir!! Bud.
- Fri Feb 19, 2021 8:42 am
- Forum: General Discussion Forum
- Topic: This story involves a Vanderbilt cup racer, Thomas Flyers, and a lowly Ford. It's going to take some time.....
- Replies: 27
- Views: 3234
Re: This story involves a Vanderbilt cup racer, Thomas Flyers, and a lowly Ford. It's going to take some time.....
I really enjoy reading these stories!! Bud.
- Thu Feb 18, 2021 8:56 am
- Forum: General Discussion Forum
- Topic: Welding machines
- Replies: 31
- Views: 4332
Re: Welding machines
I still use my very old Lincoln bought new in1977.The duty cycle is not very strong but when i had equipment it gave good service! If your doing welding as a lark why pay a ton of money for something you may quickly put aside?? Bud
- Wed Feb 17, 2021 9:31 am
- Forum: General Discussion Forum
- Topic: Welding machines
- Replies: 31
- Views: 4332
Re: Welding machines
Victor used to make a combination torch with cutting head and gas welding/brazing tips and maybe they called it a Junior Set?? I have had mine since about 1978. There are many good quality wire feed welders and unless you are into heavy stick is almost gone. If you get a stick ac/dc is better becaus...
- Tue Feb 16, 2021 4:23 pm
- Forum: General Discussion Forum
- Topic: That famous spark & thottle chart
- Replies: 11
- Views: 2828
Re: That famous spark & thottle chart
I never thought much of that chart and the way some experts played with the spark lever. A position for battery starting one for starting on mag, and the sweet spot when running?? Bud.
- Mon Feb 08, 2021 10:02 am
- Forum: General Discussion Forum
- Topic: Gas Cap-Still Can't Get It Off
- Replies: 44
- Views: 6727
Re: Gas Cap-Still Can't Get It Off
Seeing i know nothing of model T's Dan's picture was the first i have seen of this cap. The center looks heavy enough to try a Easy Out??? Bud.
- Wed Jan 27, 2021 3:48 pm
- Forum: General Discussion Forum
- Topic: C crank T block progress!
- Replies: 22
- Views: 4028
Re: C crank T block progress!
Wow!! Will the exhaust ports be enlarged?? Bud.
- Tue Jan 26, 2021 8:57 am
- Forum: General Discussion Forum
- Topic: Gaslight Drive Last Night
- Replies: 8
- Views: 2015
Re: Gaslight Drive Last Night
Been there done that. The generator is a real pain and very nasty. I always had compressed air to blow out the lines before use, but a tank is by far the better choice!! Bud.
- Mon Jan 25, 2021 3:56 pm
- Forum: General Discussion Forum
- Topic: My 1914 Project
- Replies: 20
- Views: 2828
Re: My 1914 Project
That red paint really looks nice!! Bud.
- Sat Jan 23, 2021 10:33 am
- Forum: General Discussion Forum
- Topic: Dallas Landers, we are planning a race
- Replies: 8
- Views: 1872
Re: Dallas Landers, we are planning a race
Where is the black hat?? Bud.
- Thu Jan 21, 2021 3:49 pm
- Forum: General Discussion Forum
- Topic: The Vintage Ford
- Replies: 0
- Views: 515
The Vintage Ford
Finally the Vintage Ford made central Mi. Bud.
- Wed Jan 20, 2021 2:29 pm
- Forum: General Discussion Forum
- Topic: OT - Cross Country In a Model A
- Replies: 24
- Views: 4351
Re: OT - Cross Country In a Model A
Highway 2 runs east to west and it's a very good road with little traffic. Hi Dallas, just when i thought of Emma Warehouse the other day!! Bud.
- Wed Jan 20, 2021 1:33 am
- Forum: General Discussion Forum
- Topic: OT - Cross Country In a Model A
- Replies: 24
- Views: 4351
Re: OT - Cross Country In a Model A
One has died and i haven't seen the other in a couple of years but i did know two couples that drove their A's to Alaska and back!! The fellow that died was the last Model A in the group going over the Mackinaw Bridge when the woman in her YUGO roared up and went off the bridge!! This damn Covid is ...
- Tue Jan 19, 2021 10:52 pm
- Forum: General Discussion Forum
- Topic: Milling Block Deck and Head
- Replies: 13
- Views: 2501
Re: Milling Block Deck and Head
I have had Model T A and B heads trued up in the past and usually a good machinist knows best! Bud.
- Tue Jan 19, 2021 10:43 pm
- Forum: General Discussion Forum
- Topic: FJ - Montana Towe & Howe & Ford Engines
- Replies: 16
- Views: 3063
Re: FJ - Montana Towe & Howe & Ford Engines
On a auction of the Towe a flier showed a Model T racer said to be the #2 cross country race car. I was in the money then and very interested but Model T people said i was not real. I see those engines are V-8'S but what are they?? Bud.
- Tue Jan 19, 2021 10:52 am
- Forum: General Discussion Forum
- Topic: First Model T
- Replies: 17
- Views: 3342
Re: First Model T
Under the trans cover Dan posted about if you have a screen or will install one you need a gasket on each side! Bud.
- Tue Jan 19, 2021 10:48 am
- Forum: General Discussion Forum
- Topic: Oily Rusty Paste in Cooling System
- Replies: 40
- Views: 4242
Re: Oily Rusty Paste in Cooling System
Many years ago several talked of a flush using Calgon DISHWASHER POWDER. I did both the T and model A and while not perfect it did quite well. Use distilled water with antifreeze and drain and change once a year. Compared to everything it's cheap!! Bud.
- Tue Jan 19, 2021 10:05 am
- Forum: General Discussion Forum
- Topic: Milling Block Deck and Head
- Replies: 13
- Views: 2501
Re: Milling Block Deck and Head
Less is better and also cheaper. The shape of combustion chamber is also very important. 50 years ago i used a Model B head and water pump on a Model A Doodle Bug and it made a difference in power! Bud.
- Tue Jan 19, 2021 9:57 am
- Forum: General Discussion Forum
- Topic: Shot peened crankshafts ?
- Replies: 11
- Views: 2663
Re: Shot peened crankshafts ?
Way back at the Chevy plant i started many raw castings were shot blasted in machined named WHEELABRATOR. I think this was only done to remove scale and rust to give a clean casting to machine. The shot used [steel] is very small?? Bud.
- Mon Jan 18, 2021 12:01 pm
- Forum: General Discussion Forum
- Topic: Was the Model T good value for money?
- Replies: 19
- Views: 3482
Re: Was the Model T good value for money?
If the Model T was not of good value could over 15,000 000 been sold??? Bud.
- Mon Jan 18, 2021 11:53 am
- Forum: General Discussion Forum
- Topic: Lost a tooth!
- Replies: 21
- Views: 4449
Re: Lost a tooth!
It's good to see your post TH!! Bud.
- Mon Jan 18, 2021 11:50 am
- Forum: General Discussion Forum
- Topic: 16 and looking for a Model T...What for sale out there?
- Replies: 23
- Views: 4174
Re: 16 and looking for a Model T as a first car
I think the best Model T book of all time is Tin Lizzie by Stern. If you do not have the love for a model T it soon will not be worth the trouble! Bud.
- Sun Jan 17, 2021 8:34 am
- Forum: General Discussion Forum
- Topic: Dressing the period part
- Replies: 22
- Views: 3505
Re: Dressing the period part
I think most people could easily tell your status in life by what you drove. Once the model T New Fangled and high dollar but in later years not so much. The later T's were working peoples cars and while people of the time dressed in their best for pictures i think not everyday? Bud.
- Sat Jan 16, 2021 11:30 am
- Forum: General Discussion Forum
- Topic: Where did Dodge brothers make parts for the Model T
- Replies: 13
- Views: 2727
Re: Where did Dodge brothers make parts for the Model T
Thank you Rob for some of the rest of the story! At the Gilmore Red Barns there is a placard saying the Dodge Brothers took a mans crutches from him and beat him with his crutches!!! Not people to piss with!!! Bud.
- Fri Jan 15, 2021 8:53 am
- Forum: General Discussion Forum
- Topic: Was the Model T good value for money?
- Replies: 19
- Views: 3482
Re: Was the Model T good value for money?
To if only my mind our country went to hell when nixon opened china! All of a sudden we could buy cheap and too hell with Joe who made hammers in the next town!! Well many years later we are getting just what we payed for cheap junk and Joe is on welfare!! Bud.
- Fri Jan 15, 2021 8:42 am
- Forum: General Discussion Forum
- Topic: Prayers for Lloyd Hansen, Model T guy in Oroville, CA
- Replies: 17
- Views: 3344
Re: Prayers for Lloyd Hansen, Model T guy in Oroville, CA
Good Luck!! Uncle Sam called and i got my first covid shot yesterday! Bud.
- Fri Jan 15, 2021 8:39 am
- Forum: General Discussion Forum
- Topic: Where did Dodge brothers make parts for the Model T
- Replies: 13
- Views: 2727
Re: Where did Dodge brothers make parts for the Model T
Thank you for the read which was good but a lot missing! Our friend Rob knows much about the Dodge Brothers! Bud.
- Thu Jan 14, 2021 11:10 am
- Forum: General Discussion Forum
- Topic: Dressing the period part
- Replies: 22
- Views: 3505
Re: Dressing the period part
It's hard to beat a pair of ROUNDHOUSE Bibbs!! Bud.
- Thu Jan 14, 2021 10:39 am
- Forum: General Discussion Forum
- Topic: On the road home
- Replies: 8
- Views: 1888
Re: On the road home
Thank you sir!! Telephone poles and houses with more than one chimney and buildings up to the edge of the road!! Great look back!! Bud.
- Tue Jan 12, 2021 12:16 pm
- Forum: General Discussion Forum
- Topic: T time
- Replies: 12
- Views: 1817
Re: T time
Great pictures and i say thank you!! Bud.
- Fri Jan 08, 2021 11:10 pm
- Forum: General Discussion Forum
- Topic: #2
- Replies: 15
- Views: 2566
Re: #2
Thanks guys!!! Bud.
- Fri Jan 08, 2021 2:27 pm
- Forum: General Discussion Forum
- Topic: #2
- Replies: 15
- Views: 2566
Re: #2
Very nice pictures!! I wonder about the cowl vent in the 15 or 16 stuck in the mud?? Bud.
- Fri Jan 08, 2021 8:53 am
- Forum: General Discussion Forum
- Topic: Klaxon horn debut
- Replies: 7
- Views: 1681
Re: Klaxon horn debut
I have a all brass Electric Klaxton with a patent date of 09 on it??? Bud.
- Fri Jan 08, 2021 7:56 am
- Forum: General Discussion Forum
- Topic: The Old Fashioned Way
- Replies: 29
- Views: 4469
Re: The Old Fashioned Way
Some of the time it bothers me to see young people on their phone almost all the time. On the other hand they are so able to look up anything they want to know?? Nice to see the post from so many!! PS, It's Frank Fenton's Birthday!! Bud.
- Thu Jan 07, 2021 8:57 am
- Forum: General Discussion Forum
- Topic: Nov./Dec. Vintage Ford
- Replies: 58
- Views: 7748
Re: Nov./Dec. Vintage Ford
Not yet in central Mich.. Bud.
- Wed Jan 06, 2021 2:22 pm
- Forum: General Discussion Forum
- Topic: What other than normal gas, can you run your T on?
- Replies: 31
- Views: 4429
Re: What other than normal gas, can you run your T on?
With a small oil field north of here some used drip gas when they could. Bud.
- Tue Jan 05, 2021 2:33 pm
- Forum: General Discussion Forum
- Topic: New old dealerships
- Replies: 14
- Views: 2545
Re: New old dealerships
Very nice pictures !!! The model N?? Pictured looks highly modified with later T Radiator?? Bud.
- Tue Jan 05, 2021 2:24 pm
- Forum: General Discussion Forum
- Topic: On this date in 1914
- Replies: 8
- Views: 1363
Re: On this date in 1914
I don't think many [Wifes] worked outside the home until WW2?? Bud.
- Tue Jan 05, 2021 1:19 pm
- Forum: General Discussion Forum
- Topic: On this date in 1914
- Replies: 8
- Views: 1363
Re: On this date in 1914
There were many hooks to that 5 dollar day!! Bud.
- Tue Jan 05, 2021 9:28 am
- Forum: General Discussion Forum
- Topic: Converting gas headlights from electric back to gas
- Replies: 15
- Views: 2398
Re: Converting gas headlights from electric back to gas
Just a reminder that you need to clean your tank quickly after each use!!!!! Also good is to blow out your lines with compressed air!! Carbide is nasty crap!!! Bud.
- Sun Jan 03, 2021 12:53 pm
- Forum: General Discussion Forum
- Topic: How can I know that my trailer's electric brakes are actually working?
- Replies: 17
- Views: 2955
Re: How can I know that my trailer's electric brakes are actually working?
I have not jacked up a trailer in years! I carry 3 short pices of 2x6 and pull on one of the 2 axles. Saves time and trouble! Bud.
- Fri Jan 01, 2021 10:10 am
- Forum: General Discussion Forum
- Topic: Original Smith Is Good For Our Hobby
- Replies: 20
- Views: 3648
Re: Original Smith Is Good For Our Hobby
I really like Joe Bell as he is down to earth and no one has to kiss his ring!! Bud. PS, Jerry O have you retired and moved south?? Bud.
- Sat Dec 26, 2020 8:33 am
- Forum: General Discussion Forum
- Topic: Installing A-B CAMSHAFT in T
- Replies: 26
- Views: 3921
Re: Installing A-B CAMSHAFT in T
My question is why?? Far from a expert but i think there are several profiles of Model T cams so would it be worth the effort to use a Model A cam?? Bud.
- Sat Dec 26, 2020 8:28 am
- Forum: General Discussion Forum
- Topic: Driving question
- Replies: 42
- Views: 4747
Re: Driving question
A person asked a very simple question so would a simple reply do or do you put up enough to read for 24 years?? Keep it true and simple!! Bud.
- Fri Dec 25, 2020 4:48 pm
- Forum: General Discussion Forum
- Topic: My wife has been after me to...
- Replies: 12
- Views: 2585
Re: My wife has been after me to...
Time of death?? Bud.
- Fri Dec 25, 2020 9:17 am
- Forum: General Discussion Forum
- Topic: Driving question
- Replies: 42
- Views: 4747
Re: Driving question
Myself once i push the low and im holding in low i throw the lever forward. Time to shift cut the throttle and lift your foot. Once you are used it it it is just natural. Bud.
- Wed Dec 23, 2020 8:38 pm
- Forum: General Discussion Forum
- Topic: Got lucky!!
- Replies: 14
- Views: 2757
Re: Got lucky!!
The Belt is on and While the adjustment was all the way off the belt still had to be rolled on! That could be why the catalog mentioned removing the Gen pully??? Bud. Ps, Grandson did it and i watched. Bud.
- Wed Dec 23, 2020 8:50 am
- Forum: General Discussion Forum
- Topic: Got lucky!!
- Replies: 14
- Views: 2757
Re: Got lucky!!
Duey ,I like your saying about the river and raft of life!! I think i will tackle the belt today because i might need the model A? The Doctor gave the long face and Chemo starts again soon. Merry Christmas to all!! Bud.
- Mon Dec 21, 2020 12:43 pm
- Forum: General Discussion Forum
- Topic: Getting the Ford ready for Christmas, in 1907
- Replies: 2
- Views: 1296
Re: Getting the Ford ready for Christmas, in 1907
Could that 640 have been yours?? Merry Christmas Rob!!! Bud.
- Sun Dec 20, 2020 5:28 pm
- Forum: General Discussion Forum
- Topic: That was fast!!
- Replies: 0
- Views: 713
That was fast!!
12/17 i ordered a new fan belt from Bratton's and it came 12/20!! Two sizes listed on the belt were B-41 or 5L 440. Bud.
- Fri Dec 18, 2020 11:47 am
- Forum: General Discussion Forum
- Topic: Tomorrow I make a sad journey
- Replies: 17
- Views: 3858
Re: Tomorrow I make a sad journey
Sorry to hear it Rob!! Those old Fords will out live many of us!!! Be safe!! Bud.
- Fri Dec 18, 2020 11:39 am
- Forum: General Discussion Forum
- Topic: FJ - Thanks Dean Nelson For Your Donation Of Ken Jones Benson Archive Research Materials
- Replies: 4
- Views: 1257
Re: FJ - Thanks Dean Nelson For Your Donation Of Ken Jones Benson Archive Research Materials
Nice pictures of the EARLY Carb with the tickler!!! Bud.
- Fri Dec 18, 2020 11:35 am
- Forum: General Discussion Forum
- Topic: Merry Christmas to all !
- Replies: 18
- Views: 3172
Re: Merry Christmas to all !
I hope everyone has a safe and wonderful Christmas!!! Prayer sent Gene!! Bud.
- Thu Dec 17, 2020 7:44 pm
- Forum: General Discussion Forum
- Topic: Got lucky!!
- Replies: 14
- Views: 2757
Re: Got lucky!!
Thanks I have not looked yet and i have rolled 10,000 belts on but that is just what the catalog said??? Bud.
- Thu Dec 17, 2020 6:30 pm
- Forum: General Discussion Forum
- Topic: Got lucky!!
- Replies: 14
- Views: 2757
Re: Got lucky!!
Dallas,I do not have it off yet but i called Brattions and one is on the way. If i buy Model A parts i go to Brattions because of the help in their catalog.. I have not changed a model A belt in 50 years but they said to take the gen pully off!! Now my idea of getting lucky is spoting the defect bef...
- Thu Dec 17, 2020 5:14 pm
- Forum: General Discussion Forum
- Topic: Got lucky!!
- Replies: 14
- Views: 2757
Re: Got lucky!!
Dallas, None has shown up?? Bud.
- Thu Dec 17, 2020 1:44 pm
- Forum: General Discussion Forum
- Topic: Got lucky!!
- Replies: 14
- Views: 2757
Got lucky!!
I only use a trace amount of antifreeze all year so i drain both old cars in the winter. While i was draining the Model A i happened to see it's time for a new fan belt!! I ordered one and she who must be obeyed said you don't need it now, your not going to drive it this winter!! If the good looking...
- Fri Dec 11, 2020 4:06 pm
- Forum: General Discussion Forum
- Topic: The Christmas Card!
- Replies: 1
- Views: 874
The Christmas Card!
I see our 14 every day as i carry corn in for the stove. Today one of the best cards we have ever got came! It was from Joanne and Donald Cutts!! The card said they were celebrating 68 Christmases together!! Good memories of them when we parked side by side for many years at the OCF!!! Bud and Diane...
- Wed Nov 25, 2020 10:01 pm
- Forum: General Discussion Forum
- Topic: A period looking shop.
- Replies: 41
- Views: 5300
Re: A period looking shop.
It looks very nice Dallas!! Bud.
- Fri Nov 20, 2020 8:51 am
- Forum: General Discussion Forum
- Topic: grease zerk for U-joint grease cup
- Replies: 18
- Views: 3266
Re: grease zerk for U-joint grease cup
Once you install a zerk fitting you need to carry a grease gun! Henrys way was much better!! Bud.
- Fri Nov 20, 2020 8:44 am
- Forum: General Discussion Forum
- Topic: Places we used to eat on the road.
- Replies: 22
- Views: 3526
Re: Places we used to eat on the road.
Wonderful pictures and i really enjoyed them!! Funny but there was not a picture of a old railroad diner made over into a eating place!! Bud.
- Sun Nov 15, 2020 2:42 pm
- Forum: General Discussion Forum
- Topic: EARLY WISHBONES
- Replies: 23
- Views: 3200
Re: EARLY WISHBONES
A well told story of the accident is in Tin Lizzie by Stern!! Well worth the read!! Bud.
- Fri Nov 13, 2020 6:04 pm
- Forum: General Discussion Forum
- Topic: Come next spring.
- Replies: 4
- Views: 1240
Re: Come next spring.
Like the old song ,I don't get around much anymore!! Bud.
- Fri Nov 13, 2020 9:32 am
- Forum: General Discussion Forum
- Topic: Come next spring.
- Replies: 4
- Views: 1240
Come next spring.
Last night i saw the movie come next spring and many old T's and other old cars. A feel good movie. Bud.
- Sat Nov 07, 2020 7:01 pm
- Forum: General Discussion Forum
- Topic: nice weather
- Replies: 5
- Views: 1410
Re: nice weather
It was a great day with outside grilled steaks and hot apple pie. No chimes just tick tick tick sir. Bud.
- Sat Nov 07, 2020 2:54 pm
- Forum: General Discussion Forum
- Topic: nice weather
- Replies: 5
- Views: 1410
nice weather
The oldest grandson and Tara chauffeured grandma and i around in the 14 today in perfect weather. The T ran like a fine watch!! Bud.
- Sat Oct 31, 2020 9:21 am
- Forum: General Discussion Forum
- Topic: 1914 Stuff
- Replies: 19
- Views: 3670
Re: 1914 Stuff
Any body numbers?? Any idea of the body mfg ?? Bud
- Fri Oct 30, 2020 4:42 pm
- Forum: General Discussion Forum
- Topic: This thing hurts my arm!
- Replies: 13
- Views: 3160
Re: This thing hurts my arm!
I guess i don't want to go there!! Bud.
- Thu Oct 29, 2020 9:24 am
- Forum: General Discussion Forum
- Topic: Alternate History Question 2: Modern Model T
- Replies: 5
- Views: 1661
Re: Alternate History Question 2: Modern Model T
All model T's were not the same!! Bud.
- Thu Oct 29, 2020 9:21 am
- Forum: General Discussion Forum
- Topic: Does anyone ever heard of a Porter safety neutral stop for Model T Ford Rare accessory
- Replies: 6
- Views: 2021
Re: Does anyone ever heard of a Porter safety neutral stop for Model T Ford Rare accessory
$ 2.50 was a lot of money in those days when wages were that small!! Bud.
- Tue Oct 27, 2020 2:05 pm
- Forum: General Discussion Forum
- Topic: Bat or Mag start?
- Replies: 15
- Views: 2830
Re: Bat or Mag start?
Because the mag is making current as ac the timer needs to be in the right place to mag start with the crank. I have two model T's i could not crank start on mag until i was tought how. Usually about 4 notches spark advance are needed to crank start on mag. Bud.
- Tue Oct 27, 2020 9:04 am
- Forum: General Discussion Forum
- Topic: A Procedure for Stopping a Model T Engine
- Replies: 18
- Views: 3605
Re: A Procedure for Stopping a Model T Engine
I like to retard the spark and count to five. 1 You never forget to retard the spark. 2 You get more free starts. 3 Nice if you have a stem winder. Bud.
- Mon Oct 26, 2020 3:42 pm
- Forum: General Discussion Forum
- Topic: What “heater” options did T’s have for the cold months?
- Replies: 19
- Views: 2993
Re: What “heater” options did T’s have for the cold months?
I only know about our 14 but i removed the piece of tin covering the lower dash! Bud.
- Mon Oct 26, 2020 3:32 pm
- Forum: General Discussion Forum
- Topic: How do I tell if my engine has been rebuilt?
- Replies: 19
- Views: 3279
Re: How do I tell if my engine has been rebuilt?
What Stan said!! Thirty years ago i looked at a tractor a dealer had and was told it was rebuilt! I could see the oil pan had not been removed so i asked the shop foreman?? When asked he said it only had a valve job and the low side of the trans slipped!! Bud.
- Mon Oct 26, 2020 9:51 am
- Forum: General Discussion Forum
- Topic: Old Photo Model T pulls a threshing machine More photos
- Replies: 18
- Views: 3642
Re: Old Photo Model T pulls a threshing machine More photos
The sawmill, small , and lite duty i wonder if it later became Bellsaw?? Bud
- Mon Oct 26, 2020 9:45 am
- Forum: General Discussion Forum
- Topic: Old Photo Model T pulls a threshing machine More photos
- Replies: 18
- Views: 3642
Re: Old Photo Model T pulls a threshing machine More photos
To me working from memory that looks like a corn husker to me? A road trip to Amish country would clear it up. That very well built hitch looks modern to me and if it was old time it must have been worth more than the old Fords that used it!! Bud.
- Fri Oct 23, 2020 9:06 am
- Forum: General Discussion Forum
- Topic: All-Purpose or Wheel Bearing Grease?
- Replies: 15
- Views: 2989
Re: All-Purpose or Wheel Bearing Grease?
I too also pack my model T wheel bearings the old fashioned way. I take the grease cup's off and give each one 7 pumps with the grease gun using soft red grease. I jack the front end up and check how they feel. When turned back on the grease cups force the old grease out and the new in !Bud.
- Wed Oct 21, 2020 8:22 pm
- Forum: General Discussion Forum
- Topic: The Midget Car Co. Findlay, Ohio (Model T related)
- Replies: 9
- Views: 2564
Re: The Midget Car Co. Findlay, Ohio (Model T related)
Years ago when there were many GM plants Dobson heavy haul was in Bay City at the old round house site?? Bud.
- Fri Oct 09, 2020 8:19 pm
- Forum: General Discussion Forum
- Topic: Henry Ford and the six cylinder, part 2
- Replies: 4
- Views: 1397
Re: Henry Ford and the six cylinder, part 2
Thank you Rob, i enjoyed it!!! Bud.
- Fri Oct 09, 2020 9:40 am
- Forum: General Discussion Forum
- Topic: Value of fresh magged and turned EE crankshaft
- Replies: 11
- Views: 2812
Re: Value of fresh magged and turned EE crankshaft
With all that is at stake ,i think a unground crank would be a hard sell?? Bud.
- Fri Oct 09, 2020 9:32 am
- Forum: General Discussion Forum
- Topic: A steam powered Model T? On Craigslist for the person who needs everything.
- Replies: 12
- Views: 2946
Re: A steam powered Model T? On Craigslist for the person who needs everything.
After being told how weak the Model T rear axel was for YEARS!!!! Bud.
- Wed Oct 07, 2020 9:52 pm
- Forum: General Discussion Forum
- Topic: 13T - Carbide Generator Make
- Replies: 8
- Views: 1897
Re: 13T - Carbide Generator Make
That looks like the one on our 14 and we have all 5 Victor lamps. If you use it clean it quickly after each use!! Bud.
- Wed Oct 07, 2020 7:54 am
- Forum: General Discussion Forum
- Topic: White tires
- Replies: 11
- Views: 2397
Re: White tires
Do any of these tires look to be bright white in any of the old pictures of the time?? Im on my second set of all whites, because that is what they had back then .Bud.
- Mon Oct 05, 2020 9:22 am
- Forum: General Discussion Forum
- Topic: More old Fords
- Replies: 4
- Views: 1644
Re: More old Fords
Neat pictures!! The belt on the power unit seems a little small .Bud.
- Mon Oct 05, 2020 9:11 am
- Forum: General Discussion Forum
- Topic: Let’s be safe out there.
- Replies: 7
- Views: 1908
Re: Let’s be safe out there.
thank you!! Bud.
- Fri Oct 02, 2020 6:39 pm
- Forum: General Discussion Forum
- Topic: Alternative fuel
- Replies: 20
- Views: 2961
Re: Alternative fuel
Tax free has nothing to do with kero, gas, or fuel oil! If any of these were used on the farm or off road most taxes did/do not apply. On the farm sales tax in Mich does not apply. Some large farms will use on road or clear diesel for both trucks and tractors and get a refund on the portion used off...
- Fri Oct 02, 2020 12:05 pm
- Forum: General Discussion Forum
- Topic: Alternative fuel
- Replies: 20
- Views: 2961
Re: Alternative fuel
Some of the other post are part right. There were tractors that also were made to run on kero. Those tractors had 3 tanks , one for starting gas, one for kero, and one for water to use when hot and pulling hard to prevent pre ignition with burning kero . Bud.
- Fri Oct 02, 2020 11:58 am
- Forum: General Discussion Forum
- Topic: Alternative fuel
- Replies: 20
- Views: 2961
Re: Alternative fuel
Back in 61 or 62 we ran our F-20 on fuel oil once.Same carb ,same spark plugs and it ran well. Simple to do just follow instructions on the fuel tank .Start on gas and run until very warm, shut off gas and quickly turn on fuel. Stopping is just as important as you shut off fuel oil and run until it ...
- Fri Oct 02, 2020 8:27 am
- Forum: General Discussion Forum
- Topic: Ford Model K, according to Rob
- Replies: 9
- Views: 2862
Re: Ford Model K, according to Rob
It was good and i thank you!! Bud.
- Sat Sep 26, 2020 8:47 am
- Forum: General Discussion Forum
- Topic: starting an engine on a stand
- Replies: 19
- Views: 3810
Re: starting an engine on a stand
Almost 60 years ago the kid on the next farm got a model A engine. He had nothing but the engine so we sat it on dirt and drove two old model T axels beside it. I had a black T radiator and we used old bicycle tubes for hoses! The engine sat firm and when running much over a fast idle the bottom hos...
- Mon Sep 21, 2020 2:25 pm
- Forum: General Discussion Forum
- Topic: The T and friends.
- Replies: 18
- Views: 2432
Re: The T and friends.
Dallas,Some day i would like to see the Gram Page as my father had one long ago!! Bud.
- Mon Sep 21, 2020 2:16 pm
- Forum: General Discussion Forum
- Topic: What to you, gives a Model T its charm?
- Replies: 72
- Views: 8575
Re: What to you, gives a Model T its charm?
If you read Tin Lizzie it gives a very good account of the New Ford that Henry wrecked!! In 1911 or 12 Edsel would have been very young,and his name was not mentioned in the story! The actual story say"s Henry wrecked the car with his hands and feet,no sledge hammer!! :D Please read Tin Lizzie by St...
- Sun Sep 20, 2020 4:42 pm
- Forum: General Discussion Forum
- Topic: What to you, gives a Model T its charm?
- Replies: 72
- Views: 8575
Re: What to you, gives a Model T its charm?
Reading the book Tin Lizzie by Stern when i was young! The pictures,feats,and the times when they were in use.I never saw it but the first DeLong auto was a 1915 Ford Touring and i used to listen to my father 1906-1966 about the model T! Bud.
- Sat Sep 19, 2020 10:44 am
- Forum: General Discussion Forum
- Topic: Be careful cranking update
- Replies: 7
- Views: 1978
Re: Be careful cranking update
Glad your on the mend and i hope your folks are well!! Bud DeLong.
- Sat Sep 19, 2020 8:01 am
- Forum: General Discussion Forum
- Topic: HELP!!! SHOULD I USE A WATER PUMP??
- Replies: 48
- Views: 5389
Re: HELP!!! SHOULD I USE A WATER PUMP??
I think there are too many questions to write anything in stone!!Bud