Search found 5327 matches
- Sat Apr 30, 2022 6:27 pm
- Forum: Classifieds - Parts
- Topic: Datsun Gear Drive Oil Pumps.., Going to meet their maker!!!!!
- Replies: 8
- Views: 2223
Re: FS Datsun Gear Drive Oil Pumps
For the non believers..., I scraped out today! There are no oil pump adapters, oil pumps, dams, fitting, etc available by me now. Received emails saying.., "great selling tactic", No, and the bluff was real. A photo speaks a thousand words. IMG_7347.jpeg IMG_7348.jpeg IMG_7349.jpeg IMG_7350.jpeg
- Thu Apr 28, 2022 9:29 am
- Forum: Classifieds - Parts
- Topic: Sold ..BIGFOOT Engine pedal accessory , set of 3
- Replies: 5
- Views: 1135
Re: BIGFOOT Engine pedal accessory , set of 3
Don’t see those very often!!!!!
- Tue Apr 26, 2022 6:24 pm
- Forum: General Discussion Forum
- Topic: Going Dry for More Power
- Replies: 97
- Views: 9198
Re: Going Dry for More Power
Decided to press my good fairy luck on this project. Mounted the flywheel, bell housing, and starter then connect power to check flywheel run out..., within 0.0002! Holy Crap..., me happy!
- Tue Apr 26, 2022 5:52 pm
- Forum: Classifieds - Parts
- Topic: Buggy Springs..., Going to China!
- Replies: 7
- Views: 1902
Re: FS Buggy Springs
Going for scrap metal!
- Tue Apr 26, 2022 5:51 pm
- Forum: Classifieds - Parts
- Topic: Rear Leaf Springs, 5 conventional GOING TO CHINA!
- Replies: 4
- Views: 1287
Re: FS Rear Leaf Springs, 6 conventional and 1 Reverse
Going for scrap metal!
- Tue Apr 26, 2022 5:49 pm
- Forum: Classifieds - Parts
- Topic: Frames, Front and Rear Cross Members, EYC..., GOING TO China!
- Replies: 4
- Views: 1296
Re: FS Frames, Front and Rear Crossmembers, Battery Frame Hangers
Going for scrap Monday!!!!!
- Tue Apr 26, 2022 5:48 pm
- Forum: Classifieds - Parts
- Topic: Datsun Gear Drive Oil Pumps.., Going to meet their maker!!!!!
- Replies: 8
- Views: 2223
Re: FS Datsun Gear Drive Oil Pumps
Since there appears to be zero interest in these and scrap metal is going up, time to part out/scrap out Monday. Good real USA made yellow brass, 6061 Aluminum billet, dense USA made cast iron weighs more. As the song goes..., "Turn the page", I am writing new chapters in my life with no regrets. IM...
- Mon Apr 25, 2022 3:26 pm
- Forum: General Discussion Forum
- Topic: Rajo dual plug ignition history question
- Replies: 21
- Views: 2642
Re: Rajo dual plug ignition history question
Have used both Nissan and a dual (2 each side by side) VW Bosch 009 distributors with great results!
Hank
Hank
- Mon Apr 25, 2022 11:36 am
- Forum: Classifieds - Parts
- Topic: WTB 26/27 roadster body
- Replies: 24
- Views: 3738
Re: WTB 26/27 roadster body
Jennifer,
It is not hard to bend up new frame rails and attach. Replacing sometimes better than trying to find good used ones that surprisingly has the same issues. I have the heavy sheet metal brake if you require me to fabricate. Just Sayin, been there to many times.
Hank
It is not hard to bend up new frame rails and attach. Replacing sometimes better than trying to find good used ones that surprisingly has the same issues. I have the heavy sheet metal brake if you require me to fabricate. Just Sayin, been there to many times.
Hank
- Mon Apr 25, 2022 9:52 am
- Forum: General Discussion Forum
- Topic: Help, identifying a Model T era seaplane.
- Replies: 2
- Views: 897
Re: Help, identifying a Model T era seaplane.
Rob, look under Curtiss archives I believe there were a lot going on between them.
Hope this Helps,
Hank
Hope this Helps,
Hank
- Sun Apr 24, 2022 9:42 pm
- Forum: Classifieds - Parts
- Topic: WTB: Planishing hammer
- Replies: 3
- Views: 983
Re: WTB: Planishing hammer
Text sent Shane!
Hank
Hank
- Thu Apr 21, 2022 1:19 pm
- Forum: General Discussion Forum
- Topic: Going Dry for More Power
- Replies: 97
- Views: 9198
Re: Going Dry for More Power
Well..., After a few delays, ie, my welder not big enough, brother Rick Rice tried to, not big enough, found some really good young guys in Chattanooga that did me proud! And as a bonus.., the wife went to Florida for a week! Goof off time.., I meant playtime. The plates dialed in on the money with ...
- Thu Apr 21, 2022 6:28 am
- Forum: General Discussion Forum
- Topic: windshield end caps?
- Replies: 4
- Views: 1030
Re: windshield end caps?
If you are replacing glass, to get a grip on the glass, use about 3" to 4" c clamps with thin wood blocks and pieces of rubber against the glass on both sides works well. Just wiggle equally while holding firm on the frame normally will get the worst ones out.
Hank
Hank
- Thu Apr 21, 2022 6:24 am
- Forum: General Discussion Forum
- Topic: windshield end caps?
- Replies: 4
- Views: 1030
Re: windshield end caps?
A picture would help but normally a slotted machine screw. With age and rust behind it you may need to use a hardwood block against it after removal of the screw of coarse working it off equally with a mallet.
Hope this Helps,
Hank
Hope this Helps,
Hank
- Wed Apr 20, 2022 9:25 pm
- Forum: Classifieds - Parts
- Topic: SOLD 1990-1999 Vintage Ford Magazines 60 issues
- Replies: 12
- Views: 1624
Re: SOLD 1990-1999 Vintage Ford Magazines 60 issues
No guys..., it was back in the good ole days!!!!! No speaking of years required!
- Wed Apr 20, 2022 6:32 pm
- Forum: Classifieds - Parts
- Topic: Sold Out: Stromberg "OF" P-8526 Economizer Fulcrum Screw
- Replies: 4
- Views: 904
Re: Coming Soon: Stromberg "OF" P-8526 Economizer Fulcrum Screw
Too damn Funny!!!!!!!!
- Wed Apr 20, 2022 5:46 pm
- Forum: Classifieds - Parts
- Topic: Sold Out: Stromberg "OF" P-8526 Economizer Fulcrum Screw
- Replies: 4
- Views: 904
Re: Coming Soon: Stromberg "OF" P-8526 Economizer Fulcrum Screw
WOW! Like at the rate this is going..., Scott will have new OF's available for Christmas stockings! "YOU ROCK DUDE"!
- Wed Apr 20, 2022 11:47 am
- Forum: Classifieds - Parts
- Topic: SOLD!!!! FS 1915-16 Reproduction Steel Hood
- Replies: 1
- Views: 651
Re: FS 1915-16 Reproduction Steel Hood
Sold!!!! Thanks MTFCA!
- Tue Apr 19, 2022 6:58 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!! FS 1915-16 Reproduction Steel Hood
- Replies: 1
- Views: 651
SOLD!!!! FS 1915-16 Reproduction Steel Hood
Just has barn funk and light surface rust from storage, $250.00 plus shipping. Email or Text Only if interested.
All the Best,
Hank
All the Best,
Hank
- Tue Apr 19, 2022 11:31 am
- Forum: Classifieds - Parts
- Topic: Frames, Front and Rear Cross Members, EYC..., GOING TO China!
- Replies: 4
- Views: 1296
- Tue Apr 19, 2022 10:07 am
- Forum: Classifieds - Parts
- Topic: SOLD!!!!!FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
- Replies: 7
- Views: 1942
Re: FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
All items Sold! Thanks MTFCA!
- Tue Apr 19, 2022 9:18 am
- Forum: Classifieds - Parts
- Topic: Frames, Front and Rear Cross Members, EYC..., GOING TO China!
- Replies: 4
- Views: 1296
Frames, Front and Rear Cross Members, EYC..., GOING TO China!
Have a few frames 1919-1925, 1926/27 $100.00 each you collect. Crossmembers, $50.00 each, shipping extra. Battery frame carriers, $25.00 each shipping extra. In a week or so they go for scrap metal. Email or Text ONLY if interested.
All the Best,
Hank
All the Best,
Hank
- Mon Apr 18, 2022 5:21 pm
- Forum: General Discussion Forum
- Topic: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs
- Replies: 9
- Views: 1935
Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs
Nice work Scott like always. Now go and give those eyeballs a rest!
Hank
Hank
- Mon Apr 18, 2022 12:58 pm
- Forum: Classifieds - Parts
- Topic: Off topic - dual intake for 6 cyl. Chevy fs. Sold
- Replies: 5
- Views: 1055
Re: Off topic - dual intake for 6 cyl. Chevy fs
Nice!!!! Will post this to a friend who is into ole 6 cylinder speed equipment!
Hank
Hank
- Mon Apr 18, 2022 8:58 am
- Forum: Classifieds - Parts
- Topic: SOLD!!!!!FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
- Replies: 7
- Views: 1942
Re: FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
XXXXXXXXXX last time.., will go and meet their maker!
- Mon Apr 18, 2022 8:57 am
- Forum: Classifieds - Parts
- Topic: FS Generator Bracket Relocation Kits
- Replies: 2
- Views: 945
Re: FS Generator Bracket Relocation Kits
Scrap monster got them!!!!!
- Sun Apr 17, 2022 7:04 pm
- Forum: Classifieds - Parts
- Topic: Happy Easter Day Basket Special #1
- Replies: 1
- Views: 768
Re: Happy Easter Day Basket Specials
One Sold, Thanks MTFCA!
- Sun Apr 17, 2022 7:01 pm
- Forum: Classifieds - Parts
- Topic: Happy Easter Day Basket Special #2
- Replies: 1
- Views: 683
Re: Happy Easter Day Basket Special #2
One Sold, Thanks MTFCA!
- Sun Apr 17, 2022 5:37 pm
- Forum: Classifieds - Parts
- Topic: Happy Easter Day Basket Special #2
- Replies: 1
- Views: 683
Happy Easter Day Basket Special #2
Completely rebuilt 3 only available 1937-39 Chevy top loader 3 speed with reverse transmissions modified to a Model T output ready for your speedster or what ever project. Shortening of driveshaft, torque tube/bell coupling required but I am even suppling the hard to find bell. Sorry.., I am no long...
- Sun Apr 17, 2022 5:26 pm
- Forum: Classifieds - Parts
- Topic: Happy Easter Day Basket Special #1
- Replies: 1
- Views: 768
Happy Easter Day Basket Special #1
I have 6 each 1928 Chevy heads, nice and rusty, no noticeable breaks, no valve train or rocker arms just nice bare heads…, $60.00 each. Can go to Luray if paid for and contact is made to Ryan “Mad Dog” Snellen prior to pick up at my place. Email or Text ONLY if interested.
All the Best,
Hank
All the Best,
Hank
- Fri Apr 15, 2022 7:23 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!!FS V Belt Pulley Kits, 2 Each Available SOLD!!!!
- Replies: 3
- Views: 907
Re: SOLD!!!!FS V Belt Pulley Kits, 2 Each Available SOLD!!!!
All Sold! Thanks MTFCA!
- Fri Apr 15, 2022 6:14 pm
- Forum: Classifieds - Parts
- Topic: FS 9 Tooth Pinion Gears New
- Replies: 3
- Views: 1342
Re: FS 9 Tooth Pinion Gears New
XXXXXXXXXX
- Fri Apr 15, 2022 6:14 pm
- Forum: Classifieds - Parts
- Topic: FS Generator Bracket Relocation Kits
- Replies: 2
- Views: 945
Re: FS Generator Bracket Relocation Kits
Going in the scrap pile Monday.
- Fri Apr 15, 2022 6:13 pm
- Forum: Classifieds - Parts
- Topic: Datsun Gear Drive Oil Pumps.., Going to meet their maker!!!!!
- Replies: 8
- Views: 2223
Re: FS Datsun Gear Drive Oil Pumps
XXXXXXXXXX
- Fri Apr 15, 2022 6:13 pm
- Forum: Classifieds - Parts
- Topic: FS Accessory Tow Bar Assembly
- Replies: 4
- Views: 1489
Re: FS Accessory Tow Bar Assembly
XXXXXXXXXX
- Fri Apr 15, 2022 6:12 pm
- Forum: Classifieds - Parts
- Topic: Rear Leaf Springs, 5 conventional GOING TO CHINA!
- Replies: 4
- Views: 1287
Re: FS Rear Leaf Springs, 6 conventional and 1 Reverse
4 Left.., If none goes to Luray, they go for scrap.
- Fri Apr 15, 2022 6:10 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!!!FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
- Replies: 7
- Views: 1942
- Fri Apr 15, 2022 6:09 pm
- Forum: Classifieds - Parts
- Topic: FS Small 35 amp 12 Volt Alternators
- Replies: 3
- Views: 1219
Re: FS Small 35 amp 12 Volt Alternators
XXXXXXXXXX
- Fri Apr 15, 2022 6:09 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!!FS V Belt Pulley Kits, 2 Each Available SOLD!!!!
- Replies: 3
- Views: 907
Re: FS V Belt Pulley Kits, 2 Each Available
XXXXXXXXXXX
- Thu Apr 14, 2022 7:22 am
- Forum: OT - Off topic
- Topic: Warning for all 6.7 Powerstroke owners
- Replies: 10
- Views: 2120
Re: Warning for all 6.7 Powerstroke owners
I will keep my old gas burners. Iconic names of quality are no more, the pie of profits have killed the best of them.
Hank
Hank
- Mon Apr 11, 2022 6:44 pm
- Forum: Classifieds - Parts
- Topic: FS. Rebuilt Open Valve Style T Engine
- Replies: 15
- Views: 5598
Re: FS. Rebuilt Open Valve Style T Engine
Our Buddy! REAL POS!
Hank
Hank
- Sun Apr 10, 2022 3:23 pm
- Forum: General Discussion Forum
- Topic: Ralph Reeder Instruction Sheet
- Replies: 1
- Views: 894
Re: Ralph Reeder Instruction Sheet
xxxxxxxxxx
- Sat Apr 09, 2022 3:34 pm
- Forum: General Discussion Forum
- Topic: Frontenac Heads
- Replies: 20
- Views: 2690
Re: Frontenac Heads
And we all have had different experiences with one thing or another.., the journey of life shows either it’s ugly or pretty head. Pun intended!
Hank
Hank
- Sat Apr 09, 2022 10:07 am
- Forum: Classifieds - Parts
- Topic: Luray
- Replies: 9
- Views: 2109
Re: Luray
Have items on the classifieds, not going but friends will haul for me. Must be paid for prior to the meet. Not hauling for health reasons or exercise.
Hank
Hank
- Sat Apr 09, 2022 10:04 am
- Forum: General Discussion Forum
- Topic: Going Dry for More Power
- Replies: 97
- Views: 9198
Re: Going Dry for More Power
Other Priorities as the Grand God Children from England are planning on coming over! Plus Honey-Do's!
Hank
Hank
- Sat Apr 09, 2022 9:59 am
- Forum: General Discussion Forum
- Topic: Ralph Reeder Instruction Sheet
- Replies: 1
- Views: 894
Ralph Reeder Instruction Sheet
As promised.., Print off for your records! Just a single page.
All the Best,
Hank
All the Best,
Hank
- Sat Apr 09, 2022 7:38 am
- Forum: General Discussion Forum
- Topic: Frontenac Heads
- Replies: 20
- Views: 2690
Re: Frontenac Heads
Wayne..., You nailed it! Amen Brother.
Hank
Hank
- Fri Apr 08, 2022 9:14 pm
- Forum: Classifieds - Parts
- Topic: For Sale: Brass Era C.M. Hall Brass Tail Light
- Replies: 9
- Views: 2269
Re: For Sale: Brass Era C.M. Hall Brass Tail Light
Only the second one I have ever seen!
Hank
Hank
- Fri Apr 08, 2022 8:44 pm
- Forum: General Discussion Forum
- Topic: Distributor Question
- Replies: 19
- Views: 2976
Re: Distributor Question
I have the original Ralph Reeder (Texas T Performance Parts) instructions, will post tomorrow.
Hank
Hank
- Fri Apr 08, 2022 8:14 pm
- Forum: General Discussion Forum
- Topic: Frontenac Heads
- Replies: 20
- Views: 2690
Re: Frontenac Heads
And there is a lot more where that came from.....
- Fri Apr 08, 2022 8:12 pm
- Forum: General Discussion Forum
- Topic: Frontenac Heads
- Replies: 20
- Views: 2690
Re: Frontenac Heads
Their family came from there but history in print proves otherwise. Just Sayin'
- Fri Apr 08, 2022 6:14 pm
- Forum: General Discussion Forum
- Topic: Frontenac Heads
- Replies: 20
- Views: 2690
Re: Frontenac Heads
My personal experiences..., I would never run one and rely on it. Too many in my shop over the years with either abuse as others have stated above or from my observation.., crap quality control and iron used. Just Sayin'
Hank
Hank
- Fri Apr 08, 2022 3:05 pm
- Forum: General Discussion Forum
- Topic: WANTED. NOS REAR CROSSMEMBER & BRACKETS
- Replies: 4
- Views: 983
Re: WANTED. NOS REAR CROSSMEMBER & BRACKETS
Plenty in my barn until going for scrap, pictures would help in knowing what you really need.
Hank
Hank
- Thu Apr 07, 2022 5:54 pm
- Forum: General Discussion Forum
- Topic: Lifter guides
- Replies: 10
- Views: 1943
Re: Lifter guides
There is plenty of side access if you wish to use a set screw for piece of mind. Just Sayin'
Hank
Hank
- Thu Apr 07, 2022 7:30 am
- Forum: Classifieds - Parts
- Topic: Copper Head Gasket
- Replies: 23
- Views: 3916
Re: Copper Head Gasket
Steel gaskets work very well, copper coat and go!
Hank
Hank
- Wed Apr 06, 2022 6:21 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!! FS Complete 3 Port Olds Head Kit
- Replies: 6
- Views: 1796
Re: FS Complete 3 Port Olds Head Kit
All the Best,
Hank
- Wed Apr 06, 2022 6:21 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!! FS Complete 3 Port Olds Head Kit
- Replies: 6
- Views: 1796
SOLD!!!! FS Complete 3 Port Olds Head Kit
Not for the faint at heart or weak bottom end! Gone thru, oversize valves with hard seats, custom adapter rocker arm plate converting to 1.375 to 1 ratio's, exhaust header, intake, Stromberg 97 carburetor, water neck adapter, all gaskets for the adapter plate (2), bolts, push rods, tappets with ball...
- Tue Apr 05, 2022 8:56 pm
- Forum: Classifieds - Parts
- Topic: Low Head, u-Joint 26-27 WW hubs,T books, Fatman
- Replies: 9
- Views: 1770
Re: Low Head, u-Joint 26-27 WW hubs,T books, Fatman
Smoking Deals!
- Tue Apr 05, 2022 8:18 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!!FS V Belt Pulley Kits, 2 Each Available SOLD!!!!
- Replies: 3
- Views: 907
Re: FS V Belt Pulley Kits, 2 Each Available
One kit SOLD! Thanks MTFCA!
- Tue Apr 05, 2022 7:40 pm
- Forum: General Discussion Forum
- Topic: 13T Drivetrain Problem - Babbitt Thrust Washers?
- Replies: 24
- Views: 2782
Re: 13T Drivetrain Problem - Babbitt Thrust Washers?
Over packing, filling the U-joint is not a good thing Tim. Half full or less is better. Why? The rear end when hot must vent like the engine, excessive grease prevents this, thus causing pressure to vent blowing out the outside wheel seals into the brakes. Keep the driveshaft lubed well but do not o...
- Tue Apr 05, 2022 6:37 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!!FS V Belt Pulley Kits, 2 Each Available SOLD!!!!
- Replies: 3
- Views: 907
SOLD!!!!FS V Belt Pulley Kits, 2 Each Available SOLD!!!!
Two only, $125.00 per kit with shipping. Water pump pulley is bored out for a 5/8" shaft, supplying a reduction bushing. Email or Text Only if interested.
All the Best,
Hank
All the Best,
Hank
- Tue Apr 05, 2022 1:10 pm
- Forum: General Discussion Forum
- Topic: WANTED: CANADIAN/AUSTRALIAN? RHD GENERATOR MOUNTING BRACKET (BELT DRIVE GEN.)
- Replies: 21
- Views: 2764
Re: WANTED: CANADIAN/AUSTRALIAN? RHD GENERATOR MOUNTING BRACKET (BELT DRIVE GEN.)
Get ready to dump some money for originals. From my understanding, they were weak up at the top section.
Hank
Hank
- Tue Apr 05, 2022 12:14 pm
- Forum: Classifieds - Parts
- Topic: FOR SALE - COLLINS ELECTRIC OIL GAUGE FOR FORDS NEW OLD STOCK
- Replies: 2
- Views: 928
Re: FOR SALE - COLLINS ELECTRIC OIL GAUGE FOR FORDS NEW OLD STOCK
Frickin' Cool Jay!
Hank
Hank
- Tue Apr 05, 2022 6:17 am
- Forum: Classifieds - Parts
- Topic: FS Small 35 amp 12 Volt Alternators
- Replies: 3
- Views: 1219
Re: FS Small 35 amp 12 Volt Alternators
XXXXXXXXXXX
- Tue Apr 05, 2022 6:16 am
- Forum: Classifieds - Parts
- Topic: FS Shorten for Warford, 1913 12 Rivet, Big Drum, Rocky Mountain Brakes Rear End
- Replies: 10
- Views: 2585
- Mon Apr 04, 2022 7:36 am
- Forum: Classifieds - Parts
- Topic: SOLD!!!!!FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
- Replies: 7
- Views: 1942
Re: FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
LOT #4, Sold, Thanks MTFCA!
- Sun Apr 03, 2022 8:47 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!!!FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
- Replies: 7
- Views: 1942
Re: FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
LOT #5 Sold, Thanks MTFCA!
- Sun Apr 03, 2022 7:17 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!!!FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
- Replies: 7
- Views: 1942
Re: FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
SOLD!!!! LOT #5, Pedals, Pedals, and more Pedals! Some have new shafts, all are highly serviceable...., $70.00 with shipping.SOLD!!!! IMG_7244.jpeg LOT #6, Large drum, no cracks but has a light groove. Might be a 1960's model "GROOVY"? $70.00 with shipping. IMG_7245.jpeg IMG_5672.jpeg All the Best, ...
- Sun Apr 03, 2022 7:12 pm
- Forum: Classifieds - Parts
- Topic: SOLD!!!!!FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
- Replies: 7
- Views: 1942
SOLD!!!!!FS SUNDAY TRANSMISSION BLOW OUT LOT SALES
Name says it all, price per lot with shipping. Email or Text ONLY if interested. LOT #1, A lot of new parts!...., $140.00 with shipping. IMG_7235.jpeg LOT #2, 2 complete sets inside disc, 1 partial, 1 outside small drum disc set, comes in two flat rate boxes..., $140.00 with shipping. IMG_7237.jpeg ...
- Sat Apr 02, 2022 11:33 am
- Forum: General Discussion Forum
- Topic: The Perfect Vintage Speed Boat Powered by a HAL DOHC Racing Engine
- Replies: 20
- Views: 3377
Re: The Perfect Vintage Speed Boat Powered by a HAL DOHC Racing Engine
That’s why there are only 12 Cross Radials left, the story goes the government seized and destroyed all others! Rum Runners was an understatement!
Hank
Hank
- Sat Apr 02, 2022 8:47 am
- Forum: Classifieds - Parts
- Topic: WTB: 1927 drag link
- Replies: 9
- Views: 1391
Re: WTB: 1927 drag link
I have a few 30 3/8” and 30 7/8”.
Hank
Hank
- Sat Apr 02, 2022 6:55 am
- Forum: Classifieds - Parts
- Topic: WTB: 1927 drag link
- Replies: 9
- Views: 1391
Re: WTB: 1927 drag link
Bruce, I still have some but double check to see your true length as others have stated.
Hank
Hank
- Fri Apr 01, 2022 6:52 am
- Forum: General Discussion Forum
- Topic: Playin in the shop today...
- Replies: 119
- Views: 24852
Re: Playin in the shop today...
Not to get into it.., but the can of worms has been opened...,the Department of Education at federal level got into the program. Those kids in my day that we're jocks that we're not good students got into education pushing sports, more "football"! Now they have all this extra time to talk trash abou...
- Thu Mar 31, 2022 6:09 pm
- Forum: General Discussion Forum
- Topic: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs
- Replies: 9
- Views: 1935
Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs
Pretty good for a clock doctor! LOL! Good therapy Scott!
Hank
Hank
- Thu Mar 31, 2022 2:36 pm
- Forum: General Discussion Forum
- Topic: What have you done on your Model T in March?
- Replies: 47
- Views: 6049
Re: What have you done on your Model T in March?
And you did not even see the airbag Dallas! I wrap them in bubble wrap!
- Thu Mar 31, 2022 12:17 pm
- Forum: General Discussion Forum
- Topic: What have you done on your Model T in March?
- Replies: 47
- Views: 6049
Re: What have you done on your Model T in March?
Had some serious other priorities...., Grand God Children needing to be spoiled by guess who! Hey.., they live in England and we see them every two years! 10 day turn around!
Detroit Parking!
Tin-A-See Restoration!
Hank
Detroit Parking!
Tin-A-See Restoration!
Hank
- Thu Mar 31, 2022 11:15 am
- Forum: Classifieds - Vehicles
- Topic: 1931 Model AA Ford Dump Truck.
- Replies: 10
- Views: 4574
Re: 1931 Model AA Ford Dump Truck.
Nice rig at a super price!
- Thu Mar 31, 2022 8:10 am
- Forum: General Discussion Forum
- Topic: Rare View of Five-Main Bearing Crankshaft and Supports
- Replies: 8
- Views: 1883
Re: Rare View of Five-Main Bearing Crankshaft and Supports
On the same page with you Les! Just had to have a little fun!!!!!
Hank
Hank
- Thu Mar 31, 2022 4:29 am
- Forum: General Discussion Forum
- Topic: Digital Scale For Weighing Engine Parts
- Replies: 12
- Views: 3545
Re: Digital Scale For Weighing Engine Parts
You can buy a quality one from Speedway Motors for around $80.00. Been using one for years with no problems. Don't cut corners and money and question whether it is accurate. They stand behind their stuff and so does companies like Summit, Jegs, etc. Check their ratings..., just sayin'. If you are we...
- Wed Mar 30, 2022 10:29 pm
- Forum: General Discussion Forum
- Topic: The Perfect Vintage Speed Boat Powered by a HAL DOHC Racing Engine
- Replies: 20
- Views: 3377
Re: The Perfect Vintage Speed Boat Powered by a HAL DOHC Racing Engine to Pull Behind a Antique Car
1928, 50 Hp, 5 cylinder, flat head, water cooled, 180 pounds!
- Wed Mar 30, 2022 4:28 pm
- Forum: General Discussion Forum
- Topic: The Perfect Vintage Speed Boat Powered by a HAL DOHC Racing Engine
- Replies: 20
- Views: 3377
Re: The Perfect Vintage Speed Boat Powered by a HAL DOHC Racing Engine to Pull Behind a Antique Car
Naw…, Hank has the ultimate, a Cross Radial Outboard that runs!!!!
- Tue Mar 29, 2022 7:46 am
- Forum: Classifieds - Parts
- Topic: WTB 1926-1927 Spindles
- Replies: 3
- Views: 776
Re: WTB 1926-1927 Spindles
My last set $120.00 with shipping in the lower 48.
Hank
Hank
- Mon Mar 28, 2022 9:21 pm
- Forum: Classifieds - Parts
- Topic: SUPER SUNDAY SUSPENSION COMPONENT(S) BLOW OUT SALE!
- Replies: 11
- Views: 3160
- Mon Mar 28, 2022 9:18 pm
- Forum: Classifieds - Parts
- Topic: WTB 1926-1927 Spindles
- Replies: 3
- Views: 776
Re: WTB 1926-1927 Spindles
I have some on the classifieds! I just bumped it up.
Hank
Hank
- Mon Mar 28, 2022 7:08 pm
- Forum: Classifieds - Parts
- Topic: FS Cut Away High Cylinder Head
- Replies: 1
- Views: 1024
Re: FS Cut Away High Cylinder Head
Went for scrap today!
- Mon Mar 28, 2022 9:10 am
- Forum: Classifieds - Parts
- Topic: Buggy Springs..., Going to China!
- Replies: 7
- Views: 1902
Re: FS Buggy Springs
Shorter ones are eye to eye.., 36” X 1 7/8” width X 11” static high. Longer ones are eye to eye.., 39 1/2” X 1 3/4” width X 11 3/4” static high.
- Sun Mar 27, 2022 5:01 pm
- Forum: General Discussion Forum
- Topic: Rare View of Five-Main Bearing Crankshaft and Supports
- Replies: 8
- Views: 1883
Re: Rare View of Five-Main Bearing Crankshaft and Supports
OK Les you win! The full Monty Car Porn you have it hands down!!!!
Thanks for posting!!!!
Hank
Thanks for posting!!!!
Hank
- Sun Mar 27, 2022 12:09 pm
- Forum: Classifieds - Parts
- Topic: FS Model A Spare Tire Wells, For 21" Tires
- Replies: 1
- Views: 691
Re: FS Model A Spare Tire Wells, For 21" Tires
One Sold!!!!! Thanks MTFCA!
- Sat Mar 26, 2022 8:00 pm
- Forum: Classifieds - Parts
- Topic: FS Model A Spare Tire Wells, For 21" Tires
- Replies: 1
- Views: 691
FS Model A Spare Tire Wells, For 21" Tires
I have 3 each of these, $40.00 each plus shipping. Email or Text ONLY if interested.
All the Best,
Hank
All the Best,
Hank
- Sat Mar 26, 2022 7:52 pm
- Forum: Classifieds - Parts
- Topic: Rear Leaf Springs, 5 conventional GOING TO CHINA!
- Replies: 4
- Views: 1287
Re: FS Rear Leaf Springs, 6 conventional and 1 Reverse
Reverse eye SOLD!!!!!! Thanks MTFCA!
- Sat Mar 26, 2022 7:51 pm
- Forum: Classifieds - Parts
- Topic: FS Shorten for Warford, 1913 12 Rivet, Big Drum, Rocky Mountain Brakes Rear End
- Replies: 10
- Views: 2585
Re: FS Shorten for Warford, 1913 12 Rivet, Big Drum, Rocky Mountain Brakes Rear End
This can make it to Luray, $2,500.00!!!!!
- Sat Mar 26, 2022 7:47 pm
- Forum: Classifieds - Parts
- Topic: FS Accessory Tow Bar Assembly
- Replies: 4
- Views: 1489
Re: FS Accessory Tow Bar Assembly
XXXXXXXXXX
- Sat Mar 26, 2022 7:46 pm
- Forum: Classifieds - Parts
- Topic: Datsun Gear Drive Oil Pumps.., Going to meet their maker!!!!!
- Replies: 8
- Views: 2223
Re: FS Datsun Gear Drive Oil Pumps
$200.00 per kit or going in the the scrap pile! That's a Luray delivery price, add $16.00 for shipping.
- Sat Mar 26, 2022 7:43 pm
- Forum: Classifieds - Parts
- Topic: FS Beautiful Chevy Wheel Adapters to Ford Wood Hubs
- Replies: 13
- Views: 3040
Re: FS Beautiful Chevy Wheel Adapters to Ford Wood Hubs
$400.00 per set, or the scrap man gets them.
- Sat Mar 26, 2022 7:42 pm
- Forum: Classifieds - Parts
- Topic: FS J. Hunt Multilifts Brand New with Original Instructions
- Replies: 4
- Views: 1525
- Sat Mar 26, 2022 7:41 pm
- Forum: Classifieds - Parts
- Topic: FS Generator Bracket Relocation Kits
- Replies: 2
- Views: 945
FS Generator Bracket Relocation Kits
Only 4 remain, sorry no head brackets left, easy to fabricate with minimal skills. These are for mounting the generator on non electric engines or when using an oil pump at the greater well. $65.00 each per kit with shipping. Email or Text ONLY if interested. IMG_7161.jpeg IMG_0204.jpeg IMG_5672.jpe...
- Sat Mar 26, 2022 7:32 pm
- Forum: Classifieds - Parts
- Topic: Buggy Springs..., Going to China!
- Replies: 7
- Views: 1902
Buggy Springs..., Going to China!
Can make it to Luray if paid for and contact is made by the 10th of May. $320.00 for all 4. Email or Text ONLY if interested.
All the Best,
Hank
All the Best,
Hank
- Sat Mar 26, 2022 7:29 pm
- Forum: Classifieds - Parts
- Topic: Rear Leaf Springs, 5 conventional GOING TO CHINA!
- Replies: 4
- Views: 1287
Rear Leaf Springs, 5 conventional GOING TO CHINA!
Can make it to Luray if paid for and contact is made by the 10th of May. $50.00 each conventional eye, $75.00 for the red reverse eye. I just sent my last taper leaf out this morning to AZ..., $96.00! Email or Text ONLY if interested.
All the Best,
Hank
All the Best,
Hank
- Sat Mar 26, 2022 7:25 pm
- Forum: Classifieds - Parts
- Topic: FS Small 35 amp 12 Volt Alternators
- Replies: 3
- Views: 1219
FS Small 35 amp 12 Volt Alternators
These work great where space is tight, ie brass radiator cars. You need to run a separate wire to excite the field with a simple diode. Sorry I am NOT making anymore brackets, DONE! I have 10 left, $125.00 each. Email or Text ONLY if interested. IMG_7187.jpeg IMG_7188.jpeg IMG_5672.jpeg All the Best...
- Fri Mar 25, 2022 1:33 pm
- Forum: Classifieds - Parts
- Topic: FS 9 Tooth Pinion Gears New
- Replies: 3
- Views: 1342
Re: FS 9 Tooth Pinion Gears New
One Sold, one remains. Thanks MTFCA!