Is it a stock pulley ?
I think the aluminum pulley, you do need to remove the pan.
Search found 2337 matches
- Tue Sep 21, 2021 6:51 pm
- Forum: General Discussion Forum
- Topic: Early crank pulley removal help
- Replies: 8
- Views: 1622
- Tue Sep 21, 2021 6:49 pm
- Forum: General Discussion Forum
- Topic: Self starter options for a non starter car
- Replies: 43
- Views: 4696
Re: Self starter options for a non starter car
Youz guyz are a lot of help !!
- Tue Sep 21, 2021 6:44 pm
- Forum: Classifieds - Parts
- Topic: Sold! 3-21” Roller tires, make me an offer
- Replies: 4
- Views: 1455
Re: Sold 3-21” Roller tires, make me an offer
No sir, deal was made a little while ago.
- Tue Sep 21, 2021 1:01 pm
- Forum: General Discussion Forum
- Topic: Self starter options for a non starter car
- Replies: 43
- Views: 4696
Self starter options for a non starter car
My cousin is getting up in the years and had several back surgeries. He’s just about done with his 15 RPU and curious if there are any other options for a starter for his car, aside from the obvious removal of the engine for a ring gear flywheel and hogshead. He would like to keep the aluminum hogsh...
- Tue Sep 21, 2021 12:10 pm
- Forum: General Discussion Forum
- Topic: How to remove a stuck rear wheel?
- Replies: 49
- Views: 5381
Re: How to remove a stuck rear wheel?
I have a couple knockers for sale in the classified.
I probably have a hub too if worse comes to worse.
I probably have a hub too if worse comes to worse.
- Tue Sep 21, 2021 12:07 pm
- Forum: General Discussion Forum
- Topic: 30 X 3 1/2 Metal Stem Tube Source
- Replies: 29
- Views: 3499
Re: 30 X 3 1/2 Metal Stem Tube Source
I have a bunch of used ones Jim...
You have my email, Dave
You have my email, Dave
- Tue Sep 21, 2021 12:04 pm
- Forum: Classifieds - Parts
- Topic: WTB generator cutout
- Replies: 2
- Views: 898
Re: WTB generator cutout
I have a drawer full of used ones....
hpautorepairdd at Gmail dot com
Dave
hpautorepairdd at Gmail dot com
Dave
- Tue Sep 21, 2021 9:16 am
- Forum: General Discussion Forum
- Topic: What have you done on your T - September
- Replies: 24
- Views: 3993
Re: What have you done on your T - September
Hauled a package to the Post office yesterday.
Seems fitting to take T parts in the T
Looks like rain most of today.
Seems fitting to take T parts in the T
Looks like rain most of today.
- Mon Sep 20, 2021 4:43 pm
- Forum: OT - Off topic
- Topic: Zero Pruf antifreeze can
- Replies: 1
- Views: 1036
Zero Pruf antifreeze can
Found this antifreeze can full of brass pipe...
Pipe is on the melting list and the guy at the scrap yard was wanting to keep my can. “Sorry pal, I’ll be keeping that !” I said.
I think it’s from the 50s but might be older, anyone got more information ? Over 90% Methanol !
Pipe is on the melting list and the guy at the scrap yard was wanting to keep my can. “Sorry pal, I’ll be keeping that !” I said.
I think it’s from the 50s but might be older, anyone got more information ? Over 90% Methanol !
- Mon Sep 20, 2021 11:15 am
- Forum: General Discussion Forum
- Topic: PayPal
- Replies: 23
- Views: 4456
Re: PayPal
Just received this with my last PayPal payment...
I will not be accepting payment through PayPal after this year. I’m not making a living selling Model T parts, and this is not gonna help anyone.
I will not be accepting payment through PayPal after this year. I’m not making a living selling Model T parts, and this is not gonna help anyone.
- Sun Sep 19, 2021 7:42 pm
- Forum: General Discussion Forum
- Topic: Forced To Sell
- Replies: 92
- Views: 14560
- Sun Sep 19, 2021 7:32 pm
- Forum: General Discussion Forum
- Topic: Backfire....holy cannoli
- Replies: 11
- Views: 2074
Re: Backfire....holy cannoli
Bet that got some attention !
What Denny said or just buy a new shell only.
The rest should be repairable.
What Denny said or just buy a new shell only.
The rest should be repairable.
- Sun Sep 19, 2021 7:28 pm
- Forum: Classifieds - Parts
- Topic: FS Sunday no legwork flea market
- Replies: 1
- Views: 996
Re: FS Sunday no legwork flea market
Engine mount is sold, thanks Scott and MTFCA !
- Sun Sep 19, 2021 7:26 pm
- Forum: Classifieds - Parts
- Topic: Keep Your Model T Original with Factory Spec. Drive Shaft Roller Bearing Assembly SOLD
- Replies: 21
- Views: 2805
Re: Keep Your Model T Original with Factory Spec. Drive Shaft Roller Bearing Assembly NEW PRICE
It’s worth that for the algebra lesson alone !
- Sun Sep 19, 2021 3:36 pm
- Forum: Classifieds - Parts
- Topic: FS Added 2 more sets. Outer wheel bearings, nuts and washers
- Replies: 6
- Views: 1579
Re: FS Added 2 more sets. Outer wheel bearings, nuts and washers
These 2 sets spoken for. Thanks MTFCA !
I have a few left hand thread bearings left I will clean up and a set that are not Timken also.
I have a few left hand thread bearings left I will clean up and a set that are not Timken also.
- Sun Sep 19, 2021 3:32 pm
- Forum: Classifieds - Parts
- Topic: Spare Rim
- Replies: 7
- Views: 1571
Re: Spare Rim
Appears to be a Hayes wheel.
I have a few here in Ohio.
I have a few here in Ohio.
- Sun Sep 19, 2021 12:27 pm
- Forum: Classifieds - Parts
- Topic: FS Added 2 more sets. Outer wheel bearings, nuts and washers
- Replies: 6
- Views: 1579
Re: FS Added 2 more sets. Outer wheel bearings, nuts and washers
2 more sets cleaned up good. They need cleaned better but all the rollers look good. 1 set has the earlier cage, both are Timken, 1ea, right and left hand threads with a pair of nuts and washers.
$80 including shipping USA
Please contact via email at hpautorepairdd at Gmail dot com
$80 including shipping USA
Please contact via email at hpautorepairdd at Gmail dot com
- Sun Sep 19, 2021 12:22 pm
- Forum: Classifieds - Parts
- Topic: FS Accessory engine pan brackets
- Replies: 2
- Views: 1355
Re: FS Accessory engine pan brackets
Make it $20ea OBO plus shipping USA
I have 3 total.
Should fit all 3 in a small flat rate box for $8.55
I have 3 total.
Should fit all 3 in a small flat rate box for $8.55
- Sun Sep 19, 2021 12:20 pm
- Forum: Classifieds - Parts
- Topic: Sunday Clear Out
- Replies: 4
- Views: 2154
Re: Sunday Clear Out
Valve spring tools, dash and Marvel carburetor still for sale. I found another Marvel carburetor also. It has all the parts and I’ll add it to the other one if interested for the same money.
Can email pictures.
Can email pictures.
- Sun Sep 19, 2021 12:17 pm
- Forum: Classifieds - Parts
- Topic: FS Solid not slanted windshield frame.
- Replies: 1
- Views: 815
Re: FS Solid not slanted windshield frame.
Shouldn’t be too bad to ship with no glass ?
- Sun Sep 19, 2021 12:16 pm
- Forum: Classifieds - Parts
- Topic: FS Dunn counterweights, price drop
- Replies: 5
- Views: 1747
Re: FS Dunn counterweights, price drop
Still 2 sets available
- Sun Sep 19, 2021 12:15 pm
- Forum: Classifieds - Parts
- Topic: FS Oil Side/tail lights and lenses
- Replies: 4
- Views: 1390
Re: FS Oil Side/tail lights and lenses
Anyone ???
I found a small green lens also.
I found a small green lens also.
- Sun Sep 19, 2021 12:14 pm
- Forum: Classifieds - Parts
- Topic: Sold! 3-21” Roller tires, make me an offer
- Replies: 4
- Views: 1455
Re: FS 3-21” Roller tires, make me an offer
Make me an offer
- Sun Sep 19, 2021 12:11 pm
- Forum: Classifieds - Parts
- Topic: FS Rear axle hub knockers
- Replies: 1
- Views: 892
Re: FS Rear axle hub knockers
TTT .......
- Sun Sep 19, 2021 12:10 pm
- Forum: Classifieds - Parts
- Topic: FS Sunday no legwork flea market
- Replies: 1
- Views: 996
FS Sunday no legwork flea market
I have 2 fan arms and pulleys with the long fan pulley. Fits on early motor in a 26-27 car if I recall. Stronger memories may correct me. Both have tight bushings and are clean. One has a Zerk fitting. Asking $35 each plus $15.50 shipping USA Please contact via email at hpautorepairdd at Gmail dot c...
- Thu Sep 16, 2021 1:07 pm
- Forum: General Discussion Forum
- Topic: Help identifying rim
- Replies: 3
- Views: 1122
Re: Help identifying rim
Probably a Chevy rim.
If the lugs are in a different position the valve stem won’t line up with the wheel.
If the lugs are in a different position the valve stem won’t line up with the wheel.
- Thu Sep 16, 2021 9:39 am
- Forum: Classifieds - Parts
- Topic: Found! internal post within the magneto post housing needed - outside oil line setup
- Replies: 3
- Views: 1097
Re: internal post within the magneto post housing needed - outside oil line setup
Looks very similar to the one on my car Walt.
I have a few hogsheads, I will look and see if any have that on them.
I have a few hogsheads, I will look and see if any have that on them.
- Thu Sep 16, 2021 9:07 am
- Forum: General Discussion Forum
- Topic: TT rear axle thread size ?
- Replies: 2
- Views: 864
Re: TT rear axle thread size ?
Thanks Dan, looks like I have 2
- Thu Sep 16, 2021 9:06 am
- Forum: General Discussion Forum
- Topic: Forced To Sell
- Replies: 92
- Views: 14560
Re: Forced To Sell
Hal, can we do PayPal ?
- Thu Sep 16, 2021 9:04 am
- Forum: Classifieds - Parts
- Topic: FS Rear axle hub knockers
- Replies: 1
- Views: 892
FS Rear axle hub knockers
2 T hub knocker removers. Good threads and screws easily on an axle. 1 TT knocker also....but the picture won’t load :?: I can email it to you. As I understand, you thread the tool on the axle to be removed and jack up the other side.... $30 each including shipping USA Please contact via email at hp...
- Thu Sep 16, 2021 8:58 am
- Forum: Classifieds - Parts
- Topic: FS Added 2 more sets. Outer wheel bearings, nuts and washers
- Replies: 6
- Views: 1579
Re: FS Added another set. Outer wheel bearings, nuts and washers
First set is sold.
I got another pair inspected and ready to go.
Rollers look good and feel smooth, threads right on a spindle and left on a spindle. Nuts and washers included.
Same deal, $80 including shipping USA
Please contact via email at hpautorepairdd at Gmail dot com
I got another pair inspected and ready to go.
Rollers look good and feel smooth, threads right on a spindle and left on a spindle. Nuts and washers included.
Same deal, $80 including shipping USA
Please contact via email at hpautorepairdd at Gmail dot com
- Thu Sep 16, 2021 6:54 am
- Forum: OT - Off topic
- Topic: eCommerce CRM Software Examples
- Replies: 3
- Views: 1401
Re: eCommerce CRM Software Examples
Isn’t it about time to drop the hammer on this dork ?
Belmont needs to be banned ASAP !
Belmont needs to be banned ASAP !
- Wed Sep 15, 2021 5:06 pm
- Forum: Classifieds - Parts
- Topic: FS Solid not slanted windshield frame.
- Replies: 1
- Views: 815
FS Solid not slanted windshield frame.
Early 22 and back ? Straight windshield frame.
Hinges and screw, all in very good shape. Has some rust pits, but it’s solid.
Asking $150 plus shipping
Please contact via email at hpautorepairdd at Gmail dot com
Hinges and screw, all in very good shape. Has some rust pits, but it’s solid.
Asking $150 plus shipping
Please contact via email at hpautorepairdd at Gmail dot com
- Wed Sep 15, 2021 5:00 pm
- Forum: Classifieds - Parts
- Topic: Sold! 3-21” Roller tires, make me an offer
- Replies: 4
- Views: 1455
Sold! 3-21” Roller tires, make me an offer
I have 3-4.40/4.50 21” tires good for a roller...
2 have decent tread, but I would not trust them on the road. I will have to get a price to ship, but I’m asking $30 each plus shipping.
Please contact via email at hpautorepairdd at Gmail dot com
2 have decent tread, but I would not trust them on the road. I will have to get a price to ship, but I’m asking $30 each plus shipping.
Please contact via email at hpautorepairdd at Gmail dot com
- Wed Sep 15, 2021 4:56 pm
- Forum: Classifieds - Parts
- Topic: FS Added 2 more sets. Outer wheel bearings, nuts and washers
- Replies: 6
- Views: 1579
Re: SOLD!! Outer wheel bearings, nuts and washers
These are spoken for. Thanks MTFCA
I have some more, I will clean and check them and post them as soon as I can.
I have some more, I will clean and check them and post them as soon as I can.
- Wed Sep 15, 2021 4:54 pm
- Forum: General Discussion Forum
- Topic: TT rear axle thread size ?
- Replies: 2
- Views: 864
TT rear axle thread size ?
I found a can full of axle/hub knocker removers...
Several are larger than the T axle and I figured maybe one or more might be TT.
What is the size at the hub of a TT axle ?
I saw nothing on a search.
Several are larger than the T axle and I figured maybe one or more might be TT.
What is the size at the hub of a TT axle ?
I saw nothing on a search.
- Wed Sep 15, 2021 2:18 pm
- Forum: Classifieds - Parts
- Topic: FS Added 2 more sets. Outer wheel bearings, nuts and washers
- Replies: 6
- Views: 1579
FS Added 2 more sets. Outer wheel bearings, nuts and washers
Good set of used Timken outer front wheel bearings. Been sitting in a can of oil, rollers have no pits and look good. Including a pair of nuts and washers. Right and left hand internal threads. These are about $80 each new, when they’re in stock...races are available reasonably. $80 for all includin...
- Wed Sep 15, 2021 2:08 pm
- Forum: Classifieds - Parts
- Topic: FS Accessory engine pan brackets
- Replies: 2
- Views: 1355
Re: FS Accessory engine pan brackets
To the top....
- Wed Sep 15, 2021 2:07 pm
- Forum: Classifieds - Parts
- Topic: FS Oil Side/tail lights and lenses
- Replies: 4
- Views: 1390
Re: FS Oil Side/tail lights and lenses
To the top....
- Wed Sep 15, 2021 2:06 pm
- Forum: Classifieds - Parts
- Topic: Sunday Clear Out
- Replies: 4
- Views: 2154
Re: Sunday Clear Out
Luggage rack is sold.
That’s was $20 plus shipping for ALL 3 valve tools.
Or $10ea.
That’s was $20 plus shipping for ALL 3 valve tools.
Or $10ea.
- Wed Sep 15, 2021 2:04 pm
- Forum: Classifieds - Parts
- Topic: FS Dunn counterweights, price drop
- Replies: 5
- Views: 1747
Re: FS Dunn counterweights, price drop
TTT.......
- Wed Sep 15, 2021 11:46 am
- Forum: General Discussion Forum
- Topic: Just plain fun
- Replies: 7
- Views: 2074
Re: Just plain fun
Looks like a great day Tim !!
It was windy for the last couple days. Now it’s raining here.
It was windy for the last couple days. Now it’s raining here.
- Wed Sep 15, 2021 11:44 am
- Forum: General Discussion Forum
- Topic: Ignition Switch
- Replies: 13
- Views: 2162
Re: Ignition Switch
I find that a little dielectric (silicone) grease keeps the contacts smooth & maintains good contact. Interesting, since dielectric grease (silicone) is non-conductive. Now having said that, a very small amount may act as a lubricant to help the contacts slid across the the fiber backing plate, but...
- Tue Sep 14, 2021 11:03 am
- Forum: General Discussion Forum
- Topic: Model A/flathead shop closing with T Babbit fixtures
- Replies: 3
- Views: 1257
Re: Model A/flathead shop closing with T Babbit fixtures
Apparently the owner is Kevin Prus, but that doesn’t look like his shop....
- Tue Sep 14, 2021 11:01 am
- Forum: General Discussion Forum
- Topic: Help re 26-27 ignition key
- Replies: 12
- Views: 2173
Re: Help re 26-27 ignition key
I have a locking steering wheel....if some wise guy was to lock it and take the key out, I’d be bummin. You can only take the key out if it’s locked and it just spins when locked.
I keep a spare ignition key and steering wheel key in a cigar box under the back seat.
I keep a spare ignition key and steering wheel key in a cigar box under the back seat.
- Tue Sep 14, 2021 6:50 am
- Forum: General Discussion Forum
- Topic: Forced To Sell
- Replies: 92
- Views: 14560
Re: Forced To Sell
I’m in....
3800+ members, if half did $10 the goal would be reached.
I hope things work out for the best Don
3800+ members, if half did $10 the goal would be reached.
I hope things work out for the best Don
- Sat Sep 11, 2021 5:42 pm
- Forum: OT - Off topic
- Topic: Another Unidentified Engine
- Replies: 1
- Views: 1441
Re: Another Unidentified Engine
Probably industrial...
- Sat Sep 11, 2021 10:36 am
- Forum: General Discussion Forum
- Topic: Oil Sight Gauge problem
- Replies: 28
- Views: 3029
Re: Oil Sight Gauge problem
I have an early/period sight glass on mine, it has a small hole in the top....if you park unlevel with it full, she leaves some behind.
I have never had any problems. I will say, if it’s 1/4”-1/2” down, it needs close to a quart.
I have never had any problems. I will say, if it’s 1/4”-1/2” down, it needs close to a quart.
- Sat Sep 11, 2021 10:31 am
- Forum: General Discussion Forum
- Topic: STEVE JELF UPDATE
- Replies: 5
- Views: 1925
Re: STEVE JELF UPDATE
Good thing they’re standing by their cars...
We couldn’t tell which was which !!
I thought you fixed your top Steve ?
We couldn’t tell which was which !!
I thought you fixed your top Steve ?
- Tue Sep 07, 2021 7:27 pm
- Forum: Classifieds - Parts
- Topic: WTB Sediment bulb
- Replies: 1
- Views: 917
Re: WTB Sediment bulb
Are these any different from the 20s bulbs ?
I have a bunch of those.
I have a bunch of those.
- Mon Sep 06, 2021 8:15 pm
- Forum: OT - Off topic
- Topic: Craigslist buyers never cease to amaze me.....
- Replies: 2
- Views: 1450
Re: Craigslist buyers never cease to amaze me.....
Fahrvergnugen !!
- Mon Sep 06, 2021 9:46 am
- Forum: Classifieds - Parts
- Topic: Sold!! Steel coil box with switch and key
- Replies: 2
- Views: 1229
Re: Sold!! Steel coil box with switch and key
Sold ! Thanks Rick and MTFCA
- Sun Sep 05, 2021 11:04 pm
- Forum: General Discussion Forum
- Topic: 26-27 Rear brake linings are on but wheel won't go on.
- Replies: 21
- Views: 3775
Re: 26-27 Rear brake linings are on but wheel won't go on.
What is used to cut the ends off? A cutting wheel, metal shears?? I had the same problem... Chamfered the ends and sanded some off the whole shoe. Turns free but I can’t get much more than halfway on the lever. It’s getting better and I have never had a drum hot after driving. I was going to take a...
- Sun Sep 05, 2021 10:19 pm
- Forum: General Discussion Forum
- Topic: 26-27 Rear brake linings are on but wheel won't go on.
- Replies: 21
- Views: 3775
Re: 26-27 Rear brake linings are on but wheel won't go on.
I had the same problem...
Chamfered the ends and sanded some off the whole shoe. Turns free but I can’t get much more than halfway on the lever. It’s getting better and I have never had a drum hot after driving.
I was going to take a small amount off the metal shoe where it rides on the cam next.
Chamfered the ends and sanded some off the whole shoe. Turns free but I can’t get much more than halfway on the lever. It’s getting better and I have never had a drum hot after driving.
I was going to take a small amount off the metal shoe where it rides on the cam next.
- Sun Sep 05, 2021 10:12 pm
- Forum: General Discussion Forum
- Topic: September, you and your T.
- Replies: 44
- Views: 9603
Re: September, you and your T.
Tis the season Tim, watch out !!
Better in my backyard than on the road.
We got home just as my wife was getting chilly
Better in my backyard than on the road.
We got home just as my wife was getting chilly
- Sun Sep 05, 2021 10:08 pm
- Forum: Classifieds - Parts
- Topic: Aluminum hog head WtB
- Replies: 3
- Views: 1270
Re: Aluminum hog head WtB
I have one Bob but the clutch release shaft is frozen.
- Sun Sep 05, 2021 7:49 pm
- Forum: General Discussion Forum
- Topic: September, you and your T.
- Replies: 44
- Views: 9603
Re: September, you and your T.
Wife and I went for a nice little ride a little while ago...beautiful evening.
When we got home, these 2 are in the back. I drove up about 30 yards from them and they stood there for a couple minutes.
I’m going to call the one on the left, Half a Buck.
When we got home, these 2 are in the back. I drove up about 30 yards from them and they stood there for a couple minutes.
I’m going to call the one on the left, Half a Buck.
- Sun Sep 05, 2021 1:53 pm
- Forum: Classifieds - Parts
- Topic: Sunday Clear Out
- Replies: 4
- Views: 2154
Re: Sunday Clear Out
Control levers spoken for.
- Sun Sep 05, 2021 1:51 pm
- Forum: Classifieds - Parts
- Topic: Sold!! Headlight reflectors
- Replies: 4
- Views: 1228
Re: Sold!! Headlight reflectors
Sold to Frank, thanks to MTFCA also !
Not shiny ones available...$5ea
Not shiny ones available...$5ea
- Sun Sep 05, 2021 12:03 pm
- Forum: Classifieds - Parts
- Topic: Sold!! Headlight reflectors
- Replies: 4
- Views: 1228
Re: FS Headlight reflectors
I pulled them out of the bags and now I’m not sure if 2 are not chrome. Made in Argentina on one, a matching pair and the bottom right is Ford script, I don’t think that one is chrome.
- Sun Sep 05, 2021 10:32 am
- Forum: Classifieds - Parts
- Topic: FS Cool metal lightbulb holding tray
- Replies: 0
- Views: 981
FS Cool metal lightbulb holding tray
I’m including the mag lightbulbs and about half the smaller bulbs. The bases need a little shining on them and I have not tested them.
$100 for all plus shipping
Please contact via email at hpautorepairdd at Gmail dot com
$100 for all plus shipping
Please contact via email at hpautorepairdd at Gmail dot com
- Sun Sep 05, 2021 10:27 am
- Forum: Classifieds - Parts
- Topic: Sold!! Headlight reflectors
- Replies: 4
- Views: 1228
Sold!! Headlight reflectors
I have 3 reflectors that appear to be new. I have no idea if they are silver plated or aluminum, the bottom right is definitely not chrome...I’ll get better pictures and email them if interested. $20 each plus shipping USA I have numerous ones that need re-plated. $5 each plus shipping USA Please co...
- Sun Sep 05, 2021 10:21 am
- Forum: Classifieds - Parts
- Topic: FS Accessory engine pan brackets
- Replies: 2
- Views: 1355
FS Accessory engine pan brackets
Not sure exactly how these work, but it says right on them. “Fits all Fords”
Cast iron brackets, crankcase repair arms.
$50 OBO for the pair and I’ll pay for the shipping USA
Please contact via email at hpautorepairdd at Gmail dot com
Cast iron brackets, crankcase repair arms.
$50 OBO for the pair and I’ll pay for the shipping USA
Please contact via email at hpautorepairdd at Gmail dot com
- Sun Sep 05, 2021 10:17 am
- Forum: Classifieds - Parts
- Topic: Sold!! Steel coil box with switch and key
- Replies: 2
- Views: 1229
Sold!! Steel coil box with switch and key
Very nice slanted lid box with ignition switch and key. Wood looks very solid and contacts intact. Lid fits nice but one latch has no spring detent or whatever.
Asking $80 plus shipping
Please contact via email at hpautorepairdd at Gmail dot com
Asking $80 plus shipping
Please contact via email at hpautorepairdd at Gmail dot com
- Sun Sep 05, 2021 10:08 am
- Forum: Classifieds - Parts
- Topic: Sunday Clear Out
- Replies: 4
- Views: 2154
Re: Sunday Clear Out
Valve spring tools $20 plus shipping 06A37970-6C50-4070-9DE0-E864F5502359.jpeg Iron Marvel updraft carburetor, missing throttle plate and shaft. Looks pretty good otherwise. $20 plus shipping 24ACA1A5-3D93-42A1-8871-0C285892B73D.jpeg Pair of spark and throttle rod levers. $10 for both plus shipping ...
- Sun Sep 05, 2021 10:03 am
- Forum: Classifieds - Parts
- Topic: Sunday Clear Out
- Replies: 4
- Views: 2154
Sunday Clear Out
Please contact via email at hpautorepairdd at Gmail dot com Nice unmolested curved bottom dash. No holes, very solid with light surface rust. Asking $80 plus shipping. 1B662765-440C-4413-9F5D-F679F7A649BF.jpeg 6A63E3CA-D79A-47AE-B860-F16D2E302C8A.jpeg 7DB7C7D3-8E4C-4344-B545-B38F1526D1C0.jpeg Nice f...
- Sun Sep 05, 2021 9:54 am
- Forum: Classifieds - Parts
- Topic: FS 2-Turn signal switches
- Replies: 1
- Views: 939
Re: FS 2-Turn signal switches
Open to offers
- Sun Sep 05, 2021 9:53 am
- Forum: Classifieds - Parts
- Topic: FS Accessory Shock pieces
- Replies: 1
- Views: 899
Re: FS Accessory Shock pieces
Anybody ? I hate to scrap them.
- Sun Sep 05, 2021 9:52 am
- Forum: Classifieds - Parts
- Topic: FS Oil Side/tail lights and lenses
- Replies: 4
- Views: 1390
Re: FS Oil Side/tail lights and lenses
Up to the top
- Sun Sep 05, 2021 9:52 am
- Forum: Classifieds - Parts
- Topic: FS Long nose engine pan
- Replies: 11
- Views: 2329
Re: FS Long nose engine pan
Back up top
- Sun Sep 05, 2021 9:51 am
- Forum: Classifieds - Parts
- Topic: FS Dunn counterweights, price drop
- Replies: 5
- Views: 1747
Re: FS Dunn counterweights, price drop
2 sets sold and 1 more pending. 1 set left besides the one I’m keeping.
Rich, I need your address.
Rich, I need your address.
- Sun Sep 05, 2021 8:19 am
- Forum: Classifieds - Parts
- Topic: PRICE REDUCED! HAND AHOGA HORN
- Replies: 2
- Views: 1034
Re: FOR SALE - HAND AHOGA HORN
Just curious Jay, is it a Klaxon ?
- Sat Sep 04, 2021 2:08 pm
- Forum: Classifieds - Parts
- Topic: WTB Rear spring clip for 8 leaf spring.
- Replies: 3
- Views: 932
Re: WTB Rear spring clip for 8 leaf spring.
Sent pictures in a text....
- Sat Sep 04, 2021 1:13 pm
- Forum: Classifieds - Parts
- Topic: WTB Rear spring clip for 8 leaf spring.
- Replies: 3
- Views: 932
Re: WTB Rear spring clip for 8 leaf spring.
Let me look Jack, I should have some.
- Sat Sep 04, 2021 11:12 am
- Forum: General Discussion Forum
- Topic: Help with seat spring dimensions
- Replies: 6
- Views: 1446
Re: Help with seat spring dimensions
Here is the folding seat I have.
I think it’s for a Centerdoor, what say you ?
I think it’s for a Centerdoor, what say you ?
- Fri Sep 03, 2021 10:49 pm
- Forum: General Discussion Forum
- Topic: Crank counterweights
- Replies: 25
- Views: 3340
Re: Crank counterweights
Great information Dan, clarified a lot for me.
What is the general opinion of the AA crank ?
Is it desirable too and are the weights as difficult as the EE to get right ?
What is the general opinion of the AA crank ?
Is it desirable too and are the weights as difficult as the EE to get right ?
- Fri Sep 03, 2021 8:32 am
- Forum: General Discussion Forum
- Topic: Bad habit when starting
- Replies: 30
- Views: 6641
Re: Bad habit when starting
Just to not be mistaken, if the engine backfires, the crank ratchet will not disengage regardless. The ratchet releases when the engine starts in the proper direction, spinning backwards locks the crank in, hence the danger.
- Fri Sep 03, 2021 8:26 am
- Forum: General Discussion Forum
- Topic: PayPal
- Replies: 23
- Views: 4456
Re: PayPal
It’s unfortunate since we all are pretty much friends and family here.... It’s almost insulting for someone not to trust enough to want buyer protection for a fee paid by the seller. Basically taking money out of the seller’s pocket and giving it to whoever gets rich at PayPal. People have a hard ti...
- Thu Sep 02, 2021 6:27 pm
- Forum: General Discussion Forum
- Topic: Help with seat spring dimensions
- Replies: 6
- Views: 1446
Re: Help with seat spring dimensions
Excellent Dan ! Good idea Rich but this should do it.
- Thu Sep 02, 2021 2:55 pm
- Forum: General Discussion Forum
- Topic: NH Carb
- Replies: 35
- Views: 3718
Re: NH Carb
Dan, the spray needle groove is from bottoming out but shouldn’t be an issue.
The float needle sticking is probably gum from the wonderful gasoline we get today.
Some carb cleaner and an old tooth brush on the needle and spray some on the seat, might take care of things.
The float needle sticking is probably gum from the wonderful gasoline we get today.
Some carb cleaner and an old tooth brush on the needle and spray some on the seat, might take care of things.
- Thu Sep 02, 2021 1:21 pm
- Forum: General Discussion Forum
- Topic: Help with seat spring dimensions
- Replies: 6
- Views: 1446
Help with seat spring dimensions
I have numerous seat springs, some I’m sure are are for a Model T.
Can anyone please help with some sizes of them ?
I’m thinning out stuff that isn’t for a T and hopefully someone can use the T stuff.
I also have what I think is a Center door folding seat, I’ll post a picture of it later.
Can anyone please help with some sizes of them ?
I’m thinning out stuff that isn’t for a T and hopefully someone can use the T stuff.
I also have what I think is a Center door folding seat, I’ll post a picture of it later.
- Thu Sep 02, 2021 1:16 pm
- Forum: General Discussion Forum
- Topic: What is the purpose of this gadget ?
- Replies: 3
- Views: 1316
Re: What is the purpose of this gadget ?
Looks like you nailed it Rich.
- Thu Sep 02, 2021 12:25 pm
- Forum: OT - Off topic
- Topic: Interesting package of piston rings
- Replies: 3
- Views: 1362
Re: Interesting package of piston rings
I like the Harley ones Rich...wanna trade ?
- Thu Sep 02, 2021 12:21 pm
- Forum: General Discussion Forum
- Topic: Bad habit when starting
- Replies: 30
- Views: 6641
Re: Bad habit when starting
I’ve always used my right arm, I think the biggest thing is NOT to wrap your thumb around the handle and only crank 1/4 turn at a time. Starting at 9 o’clock and pull up to 12 o’clock, and then let go of the crank....
Others may differ.
I have spun a few on occasion !!
Others may differ.
I have spun a few on occasion !!
- Thu Sep 02, 2021 11:54 am
- Forum: General Discussion Forum
- Topic: Car wash Lake Erie style
- Replies: 11
- Views: 2325
Re: Car wash Lake Erie style
All the 5 Great Lakes are fresh water, Norm.
I believe the largest area of fresh water in the world, I could be wrong about that. Ending up at Niagara Falls. A beautiful sight too.
I’d be more worried about the Muckleheads than muscles Tim, but they’re earlier in the season.
I believe the largest area of fresh water in the world, I could be wrong about that. Ending up at Niagara Falls. A beautiful sight too.
I’d be more worried about the Muckleheads than muscles Tim, but they’re earlier in the season.
- Thu Sep 02, 2021 11:46 am
- Forum: Classifieds - Parts
- Topic: FS 2-Turn signal switches
- Replies: 1
- Views: 939
FS 2-Turn signal switches
Older aftermarket switches and wires.
Should be able to make work for a T...has a canceling wheel, might be a challenge to make that work.
$50ea including shipping USA
Please contact via email, hpautorepairdd at Gmail dot com
Should be able to make work for a T...has a canceling wheel, might be a challenge to make that work.
$50ea including shipping USA
Please contact via email, hpautorepairdd at Gmail dot com
- Thu Sep 02, 2021 11:40 am
- Forum: OT - Off topic
- Topic: Interesting package of piston rings
- Replies: 3
- Views: 1362
Interesting package of piston rings
I wish they were for a T....3.5” set of 6 cylinder rings, sealed in a can !
Might look good on a shelf somewheres.
Might look good on a shelf somewheres.
- Thu Sep 02, 2021 11:34 am
- Forum: General Discussion Forum
- Topic: What is the purpose of this gadget ?
- Replies: 3
- Views: 1316
What is the purpose of this gadget ?
I know what the springs are for, but what is this piece in the middle of the axle for ?
Looks like a pretty good axle, but it’s is bent a little in the middle.
Also what are these smaller springs for ?
TIA !
Looks like a pretty good axle, but it’s is bent a little in the middle.
Also what are these smaller springs for ?
TIA !
- Thu Sep 02, 2021 7:36 am
- Forum: General Discussion Forum
- Topic: NH Carb
- Replies: 35
- Views: 3718
Re: NH Carb
I think since you have no fuel dripping when choking...it’s time for a compression test, dry then with a little oil in each cylinder.
Also check for a good seal at the intake manifold.
Good luck !
Also check for a good seal at the intake manifold.
Good luck !
- Wed Sep 01, 2021 9:46 pm
- Forum: General Discussion Forum
- Topic: Car wash Lake Erie style
- Replies: 11
- Views: 2325
Re: Car wash Lake Erie style
You should see that stretch of road in the winter, that spray freezes for quite the spectacle.
You don’t see any boats on those 8’ers. Lake Erie 8’ waves are like 12-15’ waves on the ocean.
At least you don’t have to worry about it being flammable anymore, eh Tim !!
Nice pictures.
You don’t see any boats on those 8’ers. Lake Erie 8’ waves are like 12-15’ waves on the ocean.
At least you don’t have to worry about it being flammable anymore, eh Tim !!
Nice pictures.
- Wed Sep 01, 2021 10:57 am
- Forum: Classifieds - Parts
- Topic: WTB .005" OS Iron pistons
- Replies: 5
- Views: 1552
Re: WTB .005" OS Iron pistons
I know it doesn’t help but I have a brand new set of standard size iron pistons.
Have quite a few used ones, but would have to measure them.
Have quite a few used ones, but would have to measure them.
- Wed Sep 01, 2021 8:46 am
- Forum: General Discussion Forum
- Topic: NH Carb
- Replies: 35
- Views: 3718
Re: NH Carb
Maybe it’s not the carburetor at all...
Have you checked spark and compression ?
How about the timer ?
Have you checked spark and compression ?
How about the timer ?
- Tue Aug 31, 2021 8:33 am
- Forum: General Discussion Forum
- Topic: KRW tool to ID please
- Replies: 7
- Views: 1721
Re: KRW tool to ID please
Sorry Jim, Mr Prus beat ya to it.
- Tue Aug 31, 2021 7:25 am
- Forum: General Discussion Forum
- Topic: NH Carb
- Replies: 35
- Views: 3718
Re: NH Carb help
Almost sounds like the main jet is loose or has some crap in it. The needle valve only lets fuel into the bowl or not....
- Tue Aug 31, 2021 7:17 am
- Forum: General Discussion Forum
- Topic: KRW tool to ID please
- Replies: 7
- Views: 1721
Re: KRW tool to ID please
I will, make me a reasonable offer...send me an email, hpautorepairdd at Gmail dot com
- Mon Aug 30, 2021 8:49 pm
- Forum: General Discussion Forum
- Topic: One more radiator question
- Replies: 14
- Views: 2386
- Mon Aug 30, 2021 8:47 pm
- Forum: General Discussion Forum
- Topic: KRW tool to ID please
- Replies: 7
- Views: 1721
Re: KRW tool to ID please
For cutting valve clearance into the cylinder heads that have been milled (flat heads), 6050-B-1. I believe that the B-1 suffix would make it later V-8, and if it were just the B suffix it would be earlier, but do not quote me on that. Thanks Joe ! Doubtful that anyone would mill a T head that far ...
- Mon Aug 30, 2021 7:26 pm
- Forum: Classifieds - Parts
- Topic: FS Accessory Shock pieces
- Replies: 1
- Views: 899
FS Accessory Shock pieces
A box full of shock parts....make offers for any and all. There’s a pair of everything but the ones marked 4X, I have 4 of those. Please contact via email hpautorepairdd at Gmail dot com
- Mon Aug 30, 2021 7:20 pm
- Forum: Classifieds - Parts
- Topic: FS Oil Side/tail lights and lenses
- Replies: 4
- Views: 1390
Re: FS Oil Side/tail lights and lenses
More pictures, I have more but they wouldn’t post.
Please contact via email, hpautorepairdd at Gmail dot com
I can give you more pictures.
Please contact via email, hpautorepairdd at Gmail dot com
I can give you more pictures.
- Mon Aug 30, 2021 7:17 pm
- Forum: Classifieds - Parts
- Topic: FS Oil Side/tail lights and lenses
- Replies: 4
- Views: 1390
FS Oil Side/tail lights and lenses
2- JN Brown tail lights, one is missing the burner. $45 including shipping USA The other has a small chip in the red lens. $45 including shipping USA 1- brass and black side light, I see no name on top. $75 including shipping USA 1- black Corcoran side light. $50 including shipping USA 1- red lens, ...