MTFCA Forum

Allen HCCT- Original condition, complete with gauges (needing restoration) and hard to find crank handle. Restore or clean up and use. Base will need repair as corner is broken and missing. (See pics) Will bring to Hershey if serious interest. $550. Call or text: 3one55two5six3eight5

09-15 Kingston and Holly Carbs, will bring these to Hershey, many more at home of all years . CM 30-40 Larry

For Sale, KRW Combination Machine and engine stand head. I don't know a lot about this machine, the gearbox has been replaced with a right angle drive box and looks like it should work. I have an original gearbox that will go with. I have a rack with 10 boring bars/reamers, and I believe the frames for the Model A and Model T engines. I have two...

I'm looking for a 1909 Coil box. I'm going to Hershey. Contact Eric. 815 535 1367

FS: Antique Auto dash plaques or dash plates, etched from thin gauge brass, approx 2 1/2 x 4 1/2. I believe these were originally distributed by the Greenland Company in the late 1960's or early 1970's. Also a brass Model T Club dash plaque. $10 each, not including shipping.

antq01.jpg

antq02.jpg

Thanks for looking!

FS: 3 Hardcover Copies of The Model T Ford Car - A Complete Reference on the Universal Car by Victor Page 1915, 1917, and 1920 editions. Very used. Asking $20 for the 1915 edition, $10 for the 1917 edition, and $5 for the faded 1920 edition, not including shippping.

pagemt01.jpg

pagemt02.jpg

Thanks for looking!

Can anyone confirm ID of this distributor drive please, no other details available:

2250132776.jpg

2250132831.jpg

I am bringing a 26 4 door to hershey its a project i will never get to .interior is out so you can get a good look at the bones the car is in primer and i have a clear Massachusetts title in my name .ready to restore. Will be at spot cw10 monday after lunch. First $1600 takes it away.i can text pictures if interested

Saw some fine ModelT cars and a few A too today. You have never seen so many Carburetors in your life. All look like rebuilt by RP. Tomorrow is the day. Let the fun begin!

WTB a pair of hood sides with good hinge loops and not wore through where the clips set. Mine were lost unfortunately. Trying to do a high point show car with all original sheetmetal. Please sent me pictures of what you may have available through this website. Looking for 23-25 not 26-27.
Thanks you. Stay safe. Mark Eyre Battle Creek Michigan.

All Brass Double Twist Horn. Slight blem
New reproduction from the UK
$325 post included. Insurance extra Pics available
Eric Edwards. 705 828 5405

Did anyone ever reproduce a T exhaust manifold with the FORD script? I have a NOS exhaust manifold with a script and the Ford part number on the back surface that came from a well known collector.. Bruce

Hello all - I have a few items to sell or trade that came from my 1926 roadster.
4 coils (unknown if they work) with the coil box and all new spark plug wires and new cowl to coil box wires.
A front axle with wishbone in reasonable shape.
3 or 4 (can't recall which - I'm at work right now) front spindles. These are '19 to '25 except one is a...

Here is a rebuilt Early Stamped steel double stack mag coil.
I will bring to Hershey. $250 NO SHIPPING. Email me by forum. Dan
IMG_4652.jpeg

I have at least 3 double stack oval coil cast iron mag coils and 1 double stack stamp steel mag coil cores. Any mag coil rebuilders coming to Hershey need them? For that matter, does anyone need them. Not bringing unless spoken for. Email me by forum. Be quick, times a wasting. Dan

Is anyone going to Hershey need anything generator armature cores? I can bring some if so. Email me by the forum.
If not I’ll cut the copper off and scrap them. But you better be quick. Dan

Sorry put in wrong place.

Dome light probably from a sedan as it would use a remote switch . Unknown make. Single pin bulb required. Twist mounts on base. $20 plus the ride.. PayPal friends.
Contact me through the forum please

Need just the half shown or will take a complete hinge if you don't want to split it up. Thanks
3909ACF8-87AF-424C-A5F7-5C72BE702A5F_1_201_a.jpeg

Seat bucket used on the early roadsters. Very solid metal bucket with original wood. The base board the seat is on has been charred by fire and should be replaced. It is original and good for a pattern. Asking $300 or best offer. Contact me through the forum. Thanks. Jack Putnam

For sale: Hayes rim $100 plus shipping

For sale: air pump to pressurize gas tank $150 plus postage

20250908_185200.jpg 20250908_185156.jpg

Got a complete 15 rear end. Driveshaft, Radius Rods, brake rods. Came out from under my late 15 Touring to install Ruckstell.
Has smooth backing plates. Can bring to Hershey. Email me if interested by forum. Do it fast loading trailer, may run out of room.

Thinking of parting out a combination machine to Hershey. Anyone need anything? Email me by forum. Dan

WTB A nice pair of vintage bud vases with original brackets for my ‘26 Tudor.

FS: A Jno Brown 115 tail light suitable for a 1914 Model T Ford. This one is all steel except for chimney cap and the upper part of the fount. The front door and red lens are missing. There is a lot of surface rust and some pitting, but I don't see any rust-through which is good. On the plus side the metal here is nice and straight, this light...

wanted ford 1912 touring body

FS: Another pair of Jno Brown 110 side lights, for parts or restore. These are the later versions, the entire chimney is steel with the exception of the brass tops. At some point they were copper-plated. An earlier fount is attached to one lamp but it is kind of rough. One of the tops is messed up as well. On the plus side there's very little rust...

Time again for Lang's Old Car Parts Calendar! Lang's Old Car Parts is accepting photos of your Model T for our annual calendar. Photos and information are due by Friday October 17th! High quality photos only (photos from phones usually do not work). When sending the photo, make sure it is downloaded in FULL SIZE. Newer phones can take good enough...

Hershey AACA Fall Meet is approaching. We will be bringing a large array of Used and New Old Stock items to sell as well as your pre-orders. So this means if there is anything you would like to pick up at Hershey, please let us know ahead of time as we will not have reproduction items there. We want to make sure you get everything you need so the...

I know it's not Model T but it's out of that era. Induction coil Dow Spark Coil Boston probably for a Stationary engine. Untested, needs total restoration. It's yours if you pay for shipping.

indc05.jpg

indc06.jpg

indc07.jpg

Thanks for looking!

This is a black painted bumper made by the Albany Bumper Co, Albany, NY for the black Model T. Could use some paint, but the label is still visible. Can bring to Hershey. $200 PM for info...

Frank

repainted 1917 Washington plates $150 plus shipping Very good steel plate

For Sale: A nice set of rear leaf springs for a TT. No cracks, pitting, or heavy wear. These can be hard to find without any cracks or broken leaves.
SOLD!
$40 for the set. Can be picked up at Hershey

IMG_7712.jpeg

Parting out a fordson model f .have rebuilt mag and a 1 bbl carburetor both still in boxes .tool box with tools and more .will only bring if interest.also bringing a 26 4 door project car in primer ready for restoration
Have title in hand

Parting out a fordson model f .have rebuilt mag and a 1 bbl carburetor both still in boxes .tool box with tools and more .will only bring if interest.also bringing a 26 4 door project car in primer ready for restoration
Have title in hand

Does anyone know what this Switch Panel goes to, seem like I saw one once on an early fire truck.

The key works and has BASCO on it. The fuse cover is missing, but they are labeled Horn, Rear, RHead, and LHead.

A spare fuse stands on end in the middle.

Switch Panel.jpg

Looking for the tire pump and jack handle pictured. kdmks AT att.net.

For Sale: Nice original 1914 Ford Manual.

$125 plus shipping

ford manual 1914.jpg ford manual 1914 2.jpg ford manual 1914 3.jpg ford manual 1914 5.jpg

(sold) Recently got socked with a few large bills and need to sell my 1916 Touring car. Everything has been rebuilt mechanically and all soft-parts have been replaced. 1916 motor, Ruckstell Rear end. New roof, new springs and upholstery, good tires & tubes. Includes complete set of side-curtains and a top boot. 12 volt conversion with battery...

Anyone going to Hershey have a steel gas tank for a speedster?

tank copy.png

Original frame. No running board irons attached . $ 1000 pickup only
Original Torpedo wood firewall (for pattern) $100
Original Torpedo lower body metal.(for patterns.). $250
Eric Edwards. 705 828 5405

Freshly Rebuilt Small drum Ruxtell assembly with new inner bearings 3:1 gears and shifter
$3750
Rebuilt Fronty OHV valve Head. Fitted with reground 428 valves and new springs $3950 New Rocker train available
Single Buffalo 30x3 1/2 wire wheels by Al McRoberts inquire
Reproduction Morton&Brett fibreglass body $4500 pickup only.
Eric Edwards 705...

Looking to buy a large drum Ruckstell rear end and Rocky Mountain Brakes for my 1926 Depot Hack.

Will be at Hershey and would love to arrange a pickup or purchase while I’m there.

We finished the initial restoration back in 2019 for my wedding (photo below) and now we're ready to upgrade so the car can better handle the hills of Western PA....

WANTED: for ROOF 8valve cylinder head,
3Port exhaust manifold
Cylinder head gasket or tracing
8 push rods or photo, and drawings.

thnx,
frontyboy.

brasscarguy@comcast.net or text 2ho6-919-1949(anytime)

Hershey delivery available.

These were takeoffs from a 1920 roadster project when they were replaced with a set of wheels correct for the year. Removed from a roadworthy car in the 1980's and in garaged storage most of the car's life (one-family ownership for over 90 years and put on about the 1940's). They'd look great on an unrestored driver....

I have no connection or further information
Enjoy Your Day!

Cant hurt to ask,,i was wondering if anyone is coming from west coast to hershey ? I am trying to get a t from arizona to the hershey meet. You never know if you dont ask

For Sale 2 hinges and 1 support rod. No brass caps.$100 Steve 701 212 5009

Bratton’s is closing its retail shop in October.

For Sale: 1928/29 model A roadster top irons, new never used.

These will ship folded.

$1000

28 29 top irons.jpg 28 29 top irons 2.jpg

I typically only make wheels to order… but this order got cancelled. Wheels are ready to go! 100% new components, just need paint and rubber. Bare steel, powder coating available. New hubs and caps available too

5 available 30”x3-1/2” rim —> $1200 ea + shipping

IMG_3301.jpeg IMG_3302.jpeg
IMG_1432.jpeg

Wondering if anyone is planning to come through Kansas City area on their way to Hershey this fall. I would be interested in hiring you to haul a 1924 T Runabout in your enclosed trailer if you have space. Please let me know if you would be able to do so. Thanks

 
I thought I would post this here as well as in the main forum.

As many of you know, I repair meters for HCCTs (Hand Crank Coil Testers). What I do is a very small niche of the Model T hobby. I got into this because the person that was doing it many years ago passed. There was quite a gap until I was convinced (actually conned) to take up the...

I have an extra to me Sunnen hone I will sell. It is an older model , needs motor. The motor is there but does not want to start without a spin. No stones or mandrels. Let me know if anyone is interested. I will send pictures. Email me by forum. Dan

My mother was a knitter in her spare time for most of her life. About 15 years ago she made this old car afghan for my Dad. They are both gone now and I inherited it. Recently i found the patterns in a magazine. If anyone is interested, I can possibly make copies and snail mail, or try and post better pictures. It looks like it was a 2007...

FS: Another Jno Brown 115 Tail light missing fount, burner, and green lens. The top is pretty well mashed in and there is some rust-through on the chimney; I would call this a parts light. Asking $40 not including shipping. Thanks for looking!

11505.jpg

11506.jpg

11507.jpg

11508.jpg

Thanks for looking!

FS: One Jno Brown Tail Light - I think this is a John Brown 115 but the top is blank. Fair condition, the fount is missing and the chimney looks like it's coming loose - on the plus side the glass is nice and the body isn't rusted through. Asking $60 not including shipping.

11509.jpg

11512.jpg

11511.jpg

11510.jpg

Thanks for looking!

Unfortunately Steve did not make it this year.

His spot on the field for 1915 T's was empty.

He was mentioned in conversation at Greenfield Village.

We were all thinking of you Steve and know you were there in spirit

Cleaning out some leftover black kerosene side lamp parts. Miscellaneous parts and pieces, not in pristine condition, but it might help someone complete their project. Make me an offer on the lot. Will ship USPS large priority box. Ships on your dime also. Contact me through the forum mail.

Brass Holly carburetor with a Patent Pending noted on it. Good unrestored condition that was dipped in a carburetor cleaning solution. $100.00 plus shipping.

1910s/20s BASCO (Briggs & Stratton Co.) combination ignition and light switch with two keys.

Tumbler and keys are stamped 37.

A number of different auto manufacturers used BASCO switches. Not sure what make this is from but possibly a Dodge.

$40 plus postage.

Personal check, cash or money order.

Looking for the gas tank ends repros or originals for the 1912 Torpedo. trying to make some a close to original as possible.

I am restoring several Allen Electric HCCT’s and making some extra parts.

I put arrows on the parts I can provide.

I also have extra supplies to make more electrodes. These are always broken or in poor condition so hoping it helps others with their restoration and function.

Happy to help.

David Woods

Williamston T Works

NOS Winfield model V H M N PARTS. They have shelf wear from being in a cabinet for years. Mostly 33 series throttle levers and Model M intermediate and high speed needles. Prices are in the picture. i can email you more pictures if you would like. If your are looking for a particular part for your Winfield model V H M or N just send me a message....

Using audit information, i broke down the net profit by model. Model B generated more net profit than the C and F combined for fiscal year 1905 (Oct 1, 1904 - Sep 30, 1905):

B2F6B4D8-0FEF-4246-8CCD-EA8D7A46C524.jpeg

This is what I have currently for production numbers and profit by year, taken from Ford Motor Co. Profit & Loss (audit) records. 1909 profit/loss by model were no longer documented, and I used 1908 net profit numbers (probably not correct).
Cheers,
Rob

70F47A47-FB79-4DBD-8346-FF73B1E4DDDE.jpeg

Hi, I bought these four keys recently to try in the FORDLOC that I sold. They did not work in the FORDLOC but two others (non-original Master brand keys) did and I sold those with the FORDLOC. These keys MAY work in someone else's Fraim, Slaymaker, or FORDLOC, I don't know. I simply do not need them.
There are four keys, a Master Lock, a Master, a...

Cover transportation available to Hershey form northwest. Leaving end of September. 20 foot covered trailer, will haul car, parts, rolling chassis. Fare pricing. Ray at 360 271 7780.

Single car transportation in 20 ft covered trailer from Northwest to Hershey. Also, will haul parts and chassis. Leaving Seattle area end of of September. Very fare pricing, fuel is not cheap. Contact number is 360 271 7780 ask for Ray

Today my group went to a assisted living facility for a car show for the people who cant get out to see car shows. We do this all over the county a couple times a month. It was crazy hot today, Real feel 107! Giving rides was a challenge due to the engine heat on top of the ambient temperature. All had a great time though. One lady was a 101 and...

I’m looking for these parts. If anyone has it, I can meet up at Hershey.

Kind regards,
Jonny Eriksson

Got a Disc brake system for small drum rear end that you are not going to use? I'm looking to buy one.
thnx

frontyboy(2ho6-919-1949 test or call, Seattle

No one wanted it so I deleted the ad.

Wood wheel big brake drums and hubs 50$ each both have nice keyways. Hub cap threads are so so drums are nice

I recently picked up a 1914 touring car that has had minimal restoration and mileage (due to lack of wear on the internals and moving chassis parts). Cosmetically, the car's fenders and splash aprons were repainted at some point, but the body, upholstery and tattered remains of the top are original.

The engine assembly date is late November 1913,...

New(Repo) or original any brand model t wooden coil box. Going on speedster so not fussy about the brand. Prefer complete with switch and mountings. If you have one on the shelf in the barn turn it into money. Send photos, to stop scammers, I will be asking specific questions and you will have to have the real thing or no deal.

thnx,

frontyboy

New(Repo) or original any brand model t wooden coil box. Going on speedster so not fussy about the brand. Prefer complete with switch and mountings. If you have one on the shelf in the barn turn it into money. Send photos, to stop scammers, I will be asking specific questions and you will have to have the real thing or no deal.

thnx,

frontyboy

Sold to Ed! Thanks.neat booklet for the 1920s Model T. 6 by 3 . 22 pages. Lots of graphics including Fordson Tractors. Nice original condition. 35.00 including postage within the USA. Email me directly motoringicons@hotmail.com or call at 734-730-4274 Thank you.

Tire lock is Sold

I am looking for a Fat man steering wheel for my Model T 1915. If possible a complete and working steering wheel. Shipment to the Netherlands should be no problem.

A while back I posted about how I was going to make a new set of rear hubs for my 48 spoke pin drive Daytons. I included some pictures but I thought I would show the finished articles along with the rebuilt front hubs. I made the hubs out of 4130 and the pins out of hardened 416 stainless. Instead of riveting the pins on I made them longer and...

We are going to be in the Elk City area September 16-19 and Wallace September 20-23 driving the backroads and wondering if there are any T people in those areas that would like to join us or have any special places that they would like to share with us. On this trip there will be only two cars and four people, we have a 26 roadster and a 27...

Wanted to buy this seat bracket shown in attachments, passenger side. Thanks 1924/25 Canadian coupe

…lower that speedster front end 1/2”. Make it go faster :roll: I even removed brass bushings. Notice pic of minor thread damage on right spindle - way beyond that needed for a bearing. Otherwise threads are excellent. Only $80 + the ride…

..Pat’d 1904. Needs lid half of latches but has instructions in lid. Even has the ‘key’ and 4 brass mounting brackets.
Only $80 + Fed Ex costs. … or possibly USPS flat rate medium whichever is cheaper.
gwhouse731(at)gmail(dot)com

For sale in rebuildable condition is 1 U&j up draft carb. Needs a new bowl and I do not know what else it will need. Asking price is 125 or best reasonable offer call or text George 2036873827

Four keys attached by a rivet that can be used in ignition tumblers # 51-74. Only $75 including lower 48 mailing.
gwhouse731(at)gmail(dot)com

Looks exactly like previous years. Parking in Fairlane Town Center parking lot.

Hope to see you all soon.

I am car #806 and I will be in the Red Zone.

For Sale pair of Ford Script Pliers - Band Wrench - New Wheel Puller asking $75.00 for all shipped to your door Call Matt 503-eight 2 four - 268one

A few years back, Rene posted that he was looking for a small spiral gear for a Patterson speedometer drive. I have been unable to find him in the MTFCA or MTFCI membership. If anyone knows him or his contact info, I'd like to get in touch.

Torpedo Wauseon Ohio.png

Ok. Some folks on here are aware I am rebuilding a Centerdoor from a complete body I got from another hobbyist. Said body needed some parts redone wood wise, and those pieces have been completed.

The front pillars align with the cowl, so all good there. (No final assembly yet).

Mocking up the hinge pillars and rockers seems straightforward...

This is total trivia, but I find it interesting. I have several NOS Sediment bulb inlets for the 1912 and later bulbs. The factory number on the sediment bulb is 2088, but the inlet is not listed. I find that interesting in that most of the inlets I've seen are either plugged, or have a hole punched in them.
The earlier style inlet is quite plain...

Ruckstell housing and parts. The tube is bent, it can be straightened or replaced with the extra tube. $500 for all. kdmks AT att.net. All plus shipping, pick up in Los Angeles or I can deliver south to San Diego.

Does anyone have a 60 inch speedometer cable housing with the cable they would trade for my 50 inch cable housing and cable.

I need 60 inches for my Centerdoor Stewart 160

Thanks.

I missed the sale earlier of the pump and gauge that recently sold.
I have a nice pump, but I’m looking for a gauge similar to the one that sold.
If anyone has an extra, I would be interested

Scott
636-544-7750

20250810_113552.jpg 20250810_113605.jpg 20250810_113611.jpg

T trailer wiring connector. Only one I ever found.
$35 shipped to lower 48.
Check or PayPal

Contact via forum. PM or email.

Does anyone have any wide track axels or parts for a model T?
I sent emails to collectors that I thought would have wide track axle parts but I have not received any emails or phone calls back.
Please call or email me with any information.
Thank you,
Frank Seress
sarikatime@yahoo.com
eight one eight two five four six seven nine seven

Model A Ford stainless steel headlight buckets ... both will require polishing , 1 will require some light hammer/dolly work to straighten small dented area ... price is $75.00 + actual postage or pickup at my site in northern Colorado ...Gene French 970-581-two eight zero eight hlight.JPG hlight1.JPG hlight2.JPG