MTFCA Forum

Bosch magneto control switch, grounds and kills a magneto when in OFF position or key is removed, complete and New Old Stock, use with or without the wiring sleeve cover, $235 including 48 state shipping.

Also offering a lower priced alternative, also New Old Stock ON/Off switch for magnetos, see last 2 pictures, $85 including 48 state shipping....

Set of original Schrader tire tube stem covers with rim nuts, made of brass and nickel plated could be stripped to bare brass. $65 including 48 state shipping.

Two rebuilt NH's one short arm and one long arm. Ultra sound cleaned and glass beaded with pressure tested original floats and throttle shaft bushings as required. Asking $225.00 each including shipping.

I saw these on marketplace an thought they might be of interest to some of you folks.

468893714_1886190428794073_3109282763453921824_n.jpg

4 matching cover pieces in nice shape $45 including domestic shipping.

Prest-O-Lite regulator with needle valve flow control and length of red old time rubber hose with barb and clamp. Fits all 6 diameter tanks. $135 plus $20 domestic shipping.

Original set of covers and rim nuts for 1926 and 1927 Model Ts, nickel plated made of brass, $99 including 48 state shipping.

Original Hyatt type spiral wound rear axle bearings, .002 or less wear and have tight cages, nice bearings ready to use after your final cleaning. No pitting, no rust, never any other than Satisfied Happy Model T owners. 3 are pictured but I can supply a set or more. Price is $75 per bearing, domestic postage $10 for 1 or 2. Free shipping on an...

Used halogen bulbs for 1909 to 1916 Gas headlights. 55 W 12 Volt stainless steel base screws onto original burner base. $45 for the Pair plus shipping to lower 48. prefer text message to 419-217-8884

$15 each plus shipping robertaweitzel@gmail.com

Nice cast aluminum AACA Tag Topper.
$15 plus $10 shipping in the U.S.

IMG_6049.jpeg

Here is an original T era Bevin polished brass Bermuda bell. Excellent condition. Heavy thick brass. It has a nice polish, no dents or cracks. It works great, very, very loud DING DONG! when plunger is depressed. Holds the fading tone after ringing, something only original bells can do. Very clean. Ready to mount under your wooden or steel floor...

Sold (pending payment) Here is a Walden Worcester # 5810 connecting rod wrench. This is a “must have” tool for working on any of the connecting rods and especially for getting to the rear connecting rods. $40 includes shipping anywhere in the USA. Email if you want it. Please do not post here or pm. Thanks....

Looking for early coils in any condition.

Kingston
Splitdorf
Junk KW

Please send photos

Thanks

David Woods

Customer brought me an engine to do. He supplied the pistons, HC .020 over.
Got to installing the rods and found this.
IMG_4201.jpeg

Have not seen this in years! Now I don’t know the age of these pistons, but box looks new. Are we going back on time?
Just giving everyone a heads up. Dan

Pair of Aluminum NRS Firewall Brackets that are not machined, No holes $35.00 plus shipping. Lang's 1-800-872-7871

For sale 26-27 Cowl Fuel Door or Cover and Hinge. Cover also has spring and hardware attached. Nice shape. Price $100 plus shipping. Call or text (248) 894-75fiveone. Thanks. Walt

SOLD

For Sale Rare Champion minute spark plug cleaner. No cracks or chips in glass, but does have a deep scratch (see 2nd photo). Has 20 needles (replacements) and a rubber grommet, which has become hard (1-3/16 OD). Glass tube has Champion Minute Spark Plug Cleaner Patent Pending embossed on it. Also Champion Spark Plug Co Toledo Ohio U.S.A. . Price...

SOLD. Thanks, Walt

Last pair New cast steel axle housings 1909-12 pressed into original tubes. No leaky rivets no drooping axles no distorted pressings
Perfectly CNC machined to factory specs
Ready to accept your internals. On hand shipped from NY state or for pickup in Ontario. Workmanship guaranteed. $2750 for 1911-12
$3000 for 6 rivet pairs. Only one pair...

Save the Date. June 1, 2025. Early Vendor Setup available on Saturday, May 31, after 3pm. All spaces 15x25, $35. Buyer entry $5.00. Gates open 6 AM Sunday. Come on out, help us keep this club run swap meet going another 50 years. All profits benefit local charities.
This will be our 50th year sponsoring this swap meet. See the flyer for more info.

(SOLD) Thanks, Walt

Model -T Ford 26-27 wire wheel hubs for sale. Two front hubs and two rear hubs are for sale at $200 each hub. The front hubs have inner bearings and seals installed. Pick up in Ct., as shipping costs are expensive. See the attached photo.

Listed on ebay - front plate brackets

They have been ultrasonic cleaned and are in good used condition. There is one left outer & one right outer. The inners are interchangeable for both sides. One used inner race is included because it looked really good, but is the only good used race I have at this time so it’s thrown in with the bearings as a bonus. $120 for what is pictured and...

Sold (pending payment). Here is a good used pair of original Ford headlight lenses that have taken on a nice even purple tint with age $95 for the pair and shipping is included anywhere in the USA. Email if you want them. Please do not pm or post here. Thank you.

624E8EAD-5F7B-4B1C-8996-2649664CD05E.jpeg

1925 Ford Model T touring. Ca Titled and registered. Older restoration with Ruckstell two speed rear differential and currently runs and drives. Top Irons are included. Vehicle located in Visalia,Ca. $8500 Note: car can be stored until spring if paid in full and we are able to meet transport or haul possibly to transporter for addition fee.

Just processed my renewal. Hopefully I won’t miss anything.

. . . . . . . . . .

Are there any scheduled tours in N. California this spring or summer. Might be able to help out someone in LA who suffered a loss.

Looking to buy stashes of used and rebuildable Model T Ford ignition coils.
Turn your used coils into cash. Prefer greater than 25 coils but will also consider smaller quantities.
I will buy your used coils outright for cash, trade for rebuilt coils or take your extras as full or partial payment. The more coils you have the better this deal works....

FS 1920 Roadster.jpg

Cleaned and rebuilt 1915-16 Model T Carburetor, very good condition. $70 plus shipping.

ORIGINAL, 1915-1916 License Plate Bracket, good condition, $40 plus shipping.

The very last set of new silicon steel cast centred housings pressed into original tubes. Absolutely perfect fit No rivet leaks no sagging no problems looks just like the originals with no problems. Immediate delivery. Last set. $2750 for 1909-12. 1908 and early 1909 No rivet $3000. Smooth backing plates available. Workmanship Fully guaranteed.

Pair of nice cowl tank straps need padding replaced threads are good $80 shipped lower 48

more straps and oval and round tank mounts available just ask

Pair of low hood shelfs may be repo $40 plus the ride

Part 2 Town car or Taxi.

1915 coil box, new switch the box is solid the round corner lid is in good shape as well, one exception the inner brace is loose on the lid but it is with it…. Looking for $370 for the box lid and new switch with key… Plus shipping.
(((( Or $495 for everything including 4 brass top coils )))) Plus shipping.

The cost of the new switch…I’m...

WTB, an original metal float setting gauge as pictured on page 209 Fig. 436 of the Ford Service book for an N.H. carburetor.

1926 Model T Touring Car for sale. Moving to Florida and no garage space! $10,500 OBO

12v conversion, distributor, Ruxtell 2-speed, Rocky Mt. brakes, turn signals, wire wheels. Seat belts, side windows, some extra parts.

Family fun driver, not a show car, but starts and runs well.

Phoenix, AZ area. Delivery in state available on milage basis....

$30. Shipping is included anywhere in the USA. Email if you want it. Please do not post here or pm. Thanks.

304FB030-A61B-4105-B629-F42993618EE4.jpeg

9AA5FB18-5041-4DF8-BD4E-CF03C4835C6E.jpeg

These are not available from the parts vendors and this one is in good shape. $85. Shipping inside the USA is included. Email if you want it. Please do not post here or pm. Thanks.

FCAD36AD-134A-4C3C-ABCD-CCB658096CE7.jpeg

493D4A47-FDB6-4B2B-B3A4-28A8533ACA39.jpeg

Original set of six KRW main bearing quick detachable bolts. Some patina from sitting on a shelf. These are used in place of the regular main bearing bolts when line boring the main bearings. Set includes 4 long bolts and the two short bolts for the rear main and the slotted collars that fit the bottom (or top) of the bolts. These are the real...

Sold to Montana! ORIGINAL pair of 1911-1914 headlamp forks. Great condition. Not bent or pitted. Original paint, excellent threads and original nuts. Hard to find and so much better than the reproductions. Price is 225.00 includes FedEx Ground with insurance in the USA. Don't leave me a message on the thread but call me at 734- 730 - 4274 or email...

2 pair saddle arms. Long styje for 4 socket top
One set straight arms
One set custom bent
Each set $30 pr

One Budd wire wheel rear hub and drum for Model T. Reduced price $200

I have a set of 4 good running board irons.
$100 for the 4 pieces.

KW Tubukar rear shocks accessory for Model T Fords. Some internal rebuilding required. New lower price. $125 Pr.

Front Sbd rear sets if KW tubular shock absorbers for T Fords
Some internal rebuilding needed. New lower price $125 pr

1926/27 touring top Irons in primer and fully functional now. Sold as is in Visalia,Ca 93291. $700

WTB Bauer Name/Data Tag & attaching pins for an original tilt away steering wheel. I know they were remanufactured some years ago, but are hard to find. Thanks
John M
Oscoda, Mich

7 Body Sill to Frame brackets Part # Lang's 3601A, 6 are Powder Coated Black and one sand blasted. $125 includes shipping. Pictures to your text or email.

Sold (pending payment): Set of 16. These were used ‘13-‘14 and aren’t available from the parts vendors. $35 for the set and shipping is included inside the USA. Email if you want them. Please do not post here or pm. Thanks.

3E78BBF9-141F-491B-8EB7-547AA10DCC66.jpeg

2CF3964F-D21F-40CA-AC98-6795C5DB640D.jpeg

Here is a new old stock starting crank handle & pin. It is new old stock. $40 and shipping is included anywhere in the USA. Email if you want it. Please do not post here or PM. Thanks.

3C616000-D1CD-4F9D-8D30-D850ACFAEF5E.jpeg

D44CCA5E-AE63-4088-866C-F995EF53E254.jpeg

54B0C39A-4BA2-4C8E-8098-075D18947903.jpeg...

One new 26/27 gas tank sediment bulb / shut off valve $75.00 plus $8.50 domestic shipping. Mark Chaffin (951)805-0928

Screenshot_20250101_192026_Chrome.jpg

SOLD!
Brass electric headlights to replace gas headlights. Will fit on early Model Ts. Very good condition, $300 plus shipping.

Thanks for looking.

2 mint original 30x3 clincher rims ( non demountable $125 ea
1. Mint 30x31/2 clincher non demountable rims also perfect rust/pit free $125 ea
All rims are perfect for rewooding

Coil box no
Lid some terminals and wood. Metal is straight
Damaged switch base. $50 US.

Cast brass monocle windshield with Ford script
$200 USD.

2 sets top saddle arms. 20 per set plus post

4 cast running board irons price reduced to $25 each

For chassis and commercial bodies. New old stock dash/instrument panel in original black paint with original makers decal $50US post included to lower 48 states.

New in box Rear view mirror with black
Painted mount. $35 post included

Original 1909-10 side light bracket. $75 post incl

Lower box portion no
Lid. Some fittings and wood
Damaged switch base. $50

IMG_5173.jpeg One set front KWShocks. $150
One set rear KW tubular shocks. $150 or
Need internal rebuilding

Clean tapered front spring not cracked or rusty
$100 .One incorrect leaf

Repro 1908 three digit Ohio Plate in excellent condition. This is a high quality reproduction except original plates were porcelain coated not painted . 08 and 09 Ohio plates did not display the date and were identical except that 09 calendar year numbers started in the 11,000 range. $125.00. Scott . Call Five one three 378 four two three five.

This is actually a KRW model A flywheel housing indicator tool. Bolted to a T crankshaft, it makes an excellent tool to turn the engine when fitting mains and connecting rods, and setting valve lash. $100.00. Plus shipping. kdmks AT att.net.

1909-17 Forged radius rod conversions in Brinze.
Easy fit to convert to the hard to get radius rods.

15 inch diameter monocle windshield to accept safety glass new casting $200

. Christmas special
Last of the new double twist brass horns.
$325 plus post
Also a lovely dent crack free 3/4 twist NonPariel horn for 1912-14. $300

For sale: Set of 4 1912 & earlier rebuilt KW coils and one original KW coil. $80 each plus shipping contact Gator here.

Original set of covers and rim nuts for 1926 and 1927 Model Ts, nickel plated made of brass, $99 including 48 state shipping.

Original teens or twenties hand air pump to pressurize a gas tank or use as a transfer pump, mounts on an instrument panel, not dented and in good shape, will need new leather or neoprene plunger seal, brass construction.

Yesterday I had poke around in my favourite antique shop that has quite a tool selection. I found the top one! This is the only original one I have ever found, and it is really good order.

.The wooden handle has been marked with the initials PMG. In Australia that represents , the Post Master General. Their job was maintaining the postal system...

FS Pr bronze cast conversion ends for early radius rods $75 or
Original tailite and front licence plate brackets $25 ea

Passenger side spindle body with straight arm with hole for soeedo
Mount with additional straight arm for opposite side $85
Top saddle arms. 30 pr
Edwards 705 828 5405

Passenger side spindle body with straight arm with hole for soeedo
Mount with additional straight arm for opposite side $85
Top saddle arms. 30 pr
Edwards 705 828 5405

Passenger side spindle body with straight arm with hole for soeedo
Mount with additional straight arm for opposite side $85
Top saddle arms. 30 pr
Edwards 705 828 5405

4 running board irons 25 each or 85 for 4
Hot air pipe original $20

Clean muffler ends with straight tailpipe
$50
1909-12 Front seat angle brackets. One original one repro. $35
Edwards 705 828 5405

For sale: Weaver Auto Crane wrecker boom handles. Newly cast from an original handle.They need to be machined to fit the shaft of your wrecker boom. $450 plus shipping. Contact me here, Eric Gator Gould.

These are new,, Pictures to your text or email. $400 plus shipping. Jim

New condition, $350 plus shipping, Pictures to your email or text. Jim

Complete with glass in good condition. Asking $250 including shipping, Pictures to your text or email. Jim

Only One pair immediately delivery available. Eliminate rivet leaking.drooping or sagging old housings with Silicon steel centres fully machined by CNC pressed into original tubes. perfect fit to original internals
1908-9. No rivet $3000 smooth backing plates available
1909-11 6 rivet and 11-12 clamshell. $2750
Call for further information....

Nice straight Dodge Bros front axle for 1911-12 T
Pit free and primed. $300.
One front DB spindle. $125
1909-10 front seat top
Iron pivots. $125 or
Edwards 705 828 5405

Perfect dent free crack free 3/4 twist horn. With original patina for that unrestored look!
$300 includes post to lower 48 states and . Canada
Edwards. 705 828 5405

Rear hub for 30x31/2 Budd wire wheel includes attached T brake drum ( drivers side i think) $225 USD. Ships from NY state.
Edwards. 705 828 5405

Very good complete wheel ready to install on your driver!

Hi all,
I looking for a rectangular cutout with Ford script that Ford used early on after 1919.
I need one for a machine restoration. One is shown below.
It doesn’t have to work, mostly interested in the frame and case.
Please let me know if you have one and are willing to sell it.
Thanks
Brent Mize

SOLD (pending payment). Here is an early ‘15 electric headlight. E & J 440, patented 1914. Note the placement of the focusing screw hole is above the socket which is a feature of the early electric headlights as well as the style of the collar above the threads. The threads are real nice, they haven’t been hammered. The exterior is also in real...

Pillar to roof braces for Hucksters and Depot Hacks. 3/16 thick, gloss black powder coated. $12 ea + shipping.

I have one brass monocle windshield frame with Ford script on the face. 15inch diameter with channel cast into the frame. $ 200 plus postage/insurance Ships from NY state
Edwards. 705 828 5405

Nice set of front fender irons that take the forked headlamp brackets Straight and rust free
$75 .Edwards. 705 828 5405

1909-10 dash to frame brackets. Recast in bronze
1909-10 headlamp fork brackets Recast in bronze
1909-10 sidelamp brackets recast in bronze
Original 1909-10 front seat top pivots.
All above pairs are $150 incl post to lower 48 states and Canada.
Edwards. 705 828 5405