MTFCA Forum

With or without the distributor is ok but I would like one with the toggle & levers. I'm looking for the type with the distributor on the front, not the magneto on the side.

Located in CA but happy to pay shipping.

Saw this tool on a FB Vintage Tool I.D. Group, was unidentified by the poster.

So looked up the tool in a Stevens Speed Up Catalog. Rather useful to have when one-man replacing rivets, makes a real good bucking bar.

IMG_0357.jpeg

IMG_0358.jpeg

IMG_0356.jpeg

Would have liked that tool for last job on a crossmember, resorted to...

I want to buy 1 or more Weber cast iron wheel dollies. They are patent dated 1910 plus more. Check the pictures. I have 3 of them, 2 complete and 1 with the castors missing, so 1 would be nice, or 2, or another set would also be fine, thanks, Bob. 507 458 6778.

I am looking for a Bosch plate distributor. I am also looking for a single wire wheel. I would like it to not be painted up all pretty but more of a rusty patina that can be used on a speedster, to hopefully go fast. Haha.
I am located in Indiana.
Thanks for your help.

Not sure who produced this head, or the compression rating on it. It appears to be greater than 6 to1 but that's just my opinion. The only markings on it other that the Ford script and made in USA is a 4 at the water outlet and a 2 and 4 at the back of the top surface of the head. These numbers are raised and part of the casting.

There are no...

Price isn't too bad and everything looks to be somewhat sorted and isn't and overwhelming horde of rust junk from what can be seen in the photos . $700 buy it now. No connection.

I have a question for the coil experts. I've been rebuilding some coils, checking the primary & secondary winding's, and replacing the capacitor. I am using both an old amp type tester and ECCT tester to set these up correctly. I've done about 10 so far and 5 have a strong spark and 5 a weak spark. The resistance of the primary & secondary...

To the top-1 set remaining. All sets with the tubing and mounting bolts have been spoken for. New price for the Cover and outlet bracket only is $100.00 each including FR shipping. Extra outlet fittings- either 3 dip or 4 dip or both are available. 3/8 copper tubing and mountng bolts can be purchased locally. Thank you to everyone who purchased...

Well, the last Model T of my more than 30 year hobby has left with a shipper to its new home. What started out as the first car I bought actually turned out to be the last one I fully restored. It was a 26/27 roadster Frankencar found in Idaho and I drove from Texas to pick it up with a flatbed trailer in February, needless to say NOT the time to...

For you speedster guys. Complete schebler carburetor, Its very clean and complete,
It was part of package deal 100.00----- 20.00 shipping see pictures for more details. 561 262. 0393

Can someone help with the size and location to redrill the 4 th main oil hole, measurement from shoulder would be good. Trying to finish an engine my Dad built for me before he passed away. I can’t see any trace of the hole in the shell he had re babbited. Thanks

That time of year again!

Jan 16-17 2026 will be our schedule days!!

We have a block of rooms available at a discount of $99 a night at Hampton Inn in McPherson Kansas. Cut off to get your discounted room date is Dec 26th so book fast!

Can’t wait to see old and new faces!

Aaron Frazer

Hotel information:

200 N Centennial Dr
McPherson, KS...

For sale: Ford script wire wheel hub caps all for $65 plus postage
20241027_101908.jpg

Having a Hard time posting to classified vehicles, please remove and relocate if necessary.

Here is a link to Facebook of a Martin-Parry bodied truck I have for sale.

If you are interested or have additional questions please give me a call at 314-287-1901.

I am trying to id the side lamp brackets on this 1914 Touring I recently acquired. I have gone through all of my reference materials and can't find a match to the brackets. Maybe aftermarket accessories? The car is a late August 14 build with a Hayes body. The side lamps are Victor Model 2. Thanks in advance for any help. 14T.jpg 14bracket.jpg

A local colector and restorer has bought my 1910. Also my wife of 57 years died Dec. 10.
I will give the buyer extra T Parts.

New never on car 75.00 ,
15 shipping

Hi,
I bought a late 23 chassis and looking to build a speedster with my 14 yr old son. Rather than the traditional route (seats on plywood), I'm looking to see if anyone has a body similar to the one on the photos (or of somewhat similar design). Please let me know, happy to chat by phone too. Thank you!

I have 2 sets, threads are good. $50 each includes shipping USA 48.
Please call or text 33zero 3nine one nine zero 62
Thanks Dave

I have one pair and 3 other single pieces.
$65 for all of them including shipping to USA 48
Please call or text me at 33zero 3nine one nine zero 62 Thanks Dave

A four tube Aermore No.0 whistle with a Fulton cutout. The cutout has the double butterfly valve. The cutout body has been welded to make the opening smaller. This can be removed or left as-in. Currently the cutout has approximately 1 1/2 threaded into a 2 1/4 threaded in inlet. Approximately 2 3/4 overall ID original size. Needs a good soaking to...

Happy New Year everyone! :)

Many of you will be aware by now of my Model T site, of which I'm pleased to say, gets a lot of comments about how useful people have found it.

I recently implemented a brand new feature on my Model T site, which I hope will get lots of use, and save a great deal of time!

Introducing the built-in search engine,...

I have 3 column mount horn switches and brackets. $32ea including shipping to 48 USA
And one steering wheel nut switch (Canadian?)
$30 including shipping USA 48
Best way to contact me is call or text 33zero 3nine one nine zero 62

I have a set, possibly 2 (I have to look again)
No bolts but they’re nothing special.
$150 per set and I’ll include shipping to 48 USA
Best way to contact me is 33zero 3nine one nine zero 62 Dave

See attached photos.
Fast service with no delays. Thirty-five years’ experience and 27,000 coils rebuilt.
Send me an email (only) and I will send you my telephone number, you call me, I will answer any questions and provide complete details.
Ron Patterson

I know these aren't for a Model T but are other early cars on this forum! I have ONE brand new 34x4 BF Silvertown Goodrich, black, straight side tire from Coker. I also have four new flaps. These are new, never mounted. Price is 400.00. I will also throw in two 34x4 Non-Skid tires that are really old and can only be used for display or rollers....

Up for sale is a very nice hot air pipe that I believe would be for the years of 1919-1923? Not sure it is powder coated or not, but it sure looks like it as the paint is very nice. Asking $30 with FREE Shipping to any of the lower 48 contiguous states only. Paypal preferred, using the Family and Friends option or a check will work too. If...

All,

I got permission from Suzanne to post this information. Bud Williams has retired. Suzanne Williams (Bud's daughter) and her son, Aaron, are now running the business.

Rocky Mountain Brake Co.
612 Willoughby Ln.
Stevensville, MT. 59870

NEW Rocky Mountain Brakes and parts can be purchased by calling Suzanne at 406-802-4658 or through email at...

My first Sprague is complete except for an original tie rod. My second one is missing the pitman arm and some other parts….Who has parts to a Sprague? IMG_7290.png IMG_7289.png

20240618_170139.jpg

For sale: hub puller in good condition $50 plus postage

WTB Wood 1922 T rear wheel puller

Thanks Larry

IMG_7249.png

I would like to purchase an Okeh brand Model T commutator (timer).
Please contact me through the forum email.
Thanks, Jim

#1) Reproduction. Pre-1913 door lock brass knobs.
$20.00 (Shipping included). Sold pending payment

#2) Reproduction 1909-1912 Spark and gas lever knobs.
$18.00 (Shipping included). Sold pending payment

#3) Reproduction 1909-1912 brass slotted rear axle housing
oil filler plug also used as crankcase drain plug.
$12.00 (Shipping included)....

Does Jon ( RV’s brother) have a website? Thanks Dan

Hoping to get a new or mostly new Chromed radiator cap.

20250324_141159.jpg 20250322_184948.jpg 20250322_184855.jpg

For sale: Hayes rim $100 plus shipping

I have this Atwater-Kent model LA distributor that I have made no attempt to clean or restore. It is in very good unrestored condition. It has the driven gear for the camshaft but is missing the the spacer for behind the gear (on the camshaft) and the dust cover plug which is on the bottom of the distributor body.
The body shows no signs of...

I have five BETHLEHEM Spark plugs one has a rounded hex, the other four should clean up very nicely for additions to you Spark plug collection, or to use in your Model T. They are marked in capital letters as such:
BETHLEHEM
MADE IN
U.S.A.
775
The price is $66.00 (Shipping included)

If you have a female common sense punch and/or a female dot fastner punch i would like to purchase them. I will pay by PayPal.

IMG_4514.jpeg IMG_4510.jpeg IMG_3883.jpeg IMG_4499.jpeg

I’m helping an Indianapolis area gentleman sell his Hill Climb Speedster. Don is an accomplished machinist and everything he built for this car was to keep it as light weight as possible. It’s built for the Newport Hill Climb in Newport Indiana. He said it weights around 800 lbs. I’m sure it could be converted for other uses as well.

He recently...

I need one of the buckles that mounts on the body to secure the mother-in-law seat. A strap passes through this buckle. I have the straps and one buckle, jusr need another buckle. I tried the pre t forum and thought I would try here

These brackets are reproductions I'm sure. These are the brackets that bolt on to the top of the body and attach the body to the fire wall or dash board. They may even fit the 1912 body. Would fit both touring and roadster. $20.00 (includes shipping)

This is an unrestored original E&J brass tail light for a 1909-1912 model T. It will polish up easily and be much more presentable. There are some small dents, mostly in the font. The fonts are available new as are burners. The glass lenses are in good shape without chips or cracks. It's missing the burner. The inside reflector is in good shope...

These caps will be sold as a pair. They will need some hand work and polishing to be pristine. $20.00 (shipping included)

What would a 4 wire switch harness be for?
Dash switch, non starter, mag headlights and horn car or truck?
I use to know but not sure now. Here is a picture
IMG_5105.jpeg
How about a 4 position terminal block. One terminal marked bat.
Thanks, Dan

I got these hinges with a basket case 24 touring that I bought. I know they are not for this car. Can anyone tell me if they are Model T

For Sale is a hard to find 1916-1917 Steering Column mounted Horn Button. This button uses 2 wires SOLD plus shipping. Lang’s 1-800-872-7871

A client is rewooding a touring car, and he found that the blueprints he was given don't match with the wood in the body. Is there a reliable source for body wood blueprints?

For Sale is a pair of older reproduction Sidelight Brackets made from Aluminum. SOLD. plus shipping. Lang’s 1-800-872-7871

For Sale is a nice 1913 All Brass Horn with screen. It will need to be repainted SOLD plus shipping. Lang’s 1-800-872-7871

IMG_0626.jpeg

Respoked 30x3-1/2 Budd wire wheel powder coated. Very nice wheel and rim all new spokes and nipples . Ready to mount a tire on. Pictures on request can't get them to load. $250 plus shipping.

frontyboy contact me on here.

For sale: set of fender irons. $75 plus shipping
20251010_180222.jpg 20251010_180158.jpg

I am restoring a 1914 T that will be getting a new firewall. When I restored our 1911 Touring, I used Laurel Mountain Forge antique cherry stain, based on recommendations on the forum site. It really is a good match for the original stain Ford used, when comparing it to the portions of the firewall that had been hidden for over 100 years.

This...

For Sale 1912 Holley Carburetor complete but bowl has multiple stress cracks. Complete and ready to be restored. SOLD. plus shipping Lang’s 1-800-872-7871

For Sale is ONE older reproduction Ford Model T License Plate Frame. $15.00 plus shipping. Lang’s 1-800-872-7871

shackles as pictured 4 l shaped 3 others all for $60 includes shipping

IMG_4714.jpeg IMG_4636.jpeg IMG_4713.jpeg IMG_4578.jpeg

Just posted a new Model T road trip video from Fresno into the foothills of Central California—camping at the San Joaquin River Gorge, roadside brake adjustment, North Fork, and a run out to one of the disputed locations of California’s geographic center.

If nothing else, I really encourage you to watch the segment with Austin, an 18-year-old...

For sale: New York Coil box with coils $750
Box is in very good condition

DSC01112.JPG DSC01115.JPG DSC01113.JPG

For sale: model t jack made by Pratt Mfg. of Chicago $40 plus shipping
20250327_170632.jpg

For sale: transmission clutch yoke collar $25 plus shipping

For sale: starter bendix parts $200 plus postage
over $500 plus some not available

20250701_162043.jpg 20250701_162018.jpg

Happy new year everyone, I am beginning the top wood install on my 1924 Canadian Coupe. I would call this a top wood replacement but unfortunately there was no wood here to begin with. I have purchased a top wood kit from Snyder’s. If you guys have any input or possibly links to known good articles on the topic that could be of value to me it...

Liquidating an estate lots of interesting early car stuff, not much Model T Ford but this is a rare nice original oak varnished wood coil tester. $250.00.

Ed aka #4

This is a common 1917-25 style spindle, but apparently a bearing cage or something came loose and cut a groove about 3/16 deep. Yes I know they don't make 'em anymore, but there are still a lot of these around. I just hate to throw it out if there's a chance someone might need it. Is it worth saving?

tspdlx01.jpg

Working on getting some anti tarnish coverings made for my car and a few friends. May even make these to sell. So far we have worked out fitted headlight covers for 13 14 models (earlier models will come soon) hub cap covers and speedo covers. Pototyping of the rad and cowl lamps are progressing. All covers are made of water proof black canvas...

20220721_195820.jpg 20220721_195926.jpg

For sale: brass hubcaps. $45 plus shipping for all 3