MTFCA Forum

Having spent 4 years in the Marines from 1972 to 1977 and running 3 miles a day, it destroyed my knees. It has been 48 years since my discharge from the Marines and I have waited as long as I can. I am almost a cripple and it has finally come to the point where I need to get knee replacement surgery. I will be having the right knee done on July 25...

Screenshot_7-3-2025_10813_www.google.com_.jpeg

Like some of you guys, I like to wear bibs most of the time. They stay UP! I have bought most on Ebay, and had them brought to Australia by incoming travellers to save postage which is generally more than the cost of the bibs. Thank you Keith G. for the last lot. i even managed to source some USA made old stock Oshkosh, Key and some Roundhouse,...

REO 1909.png

It is all there, but the wheel rims are in need. It looks like they sat in the dirt.
It even had the canvas belly pan under the car and around the chain drive.

This White truck was recently pulled out of a garage in the high country above Boulder and donated to the local history museum. They want to re-create a bus used by the “Boulder Bluebirds”, a women’s group who brought female vacationers from Chicago to the high country for authentic “frontier” experience in the old mining town of Gold Hill in the...

Supposedly, a basic, compact, pickup-type EV will be available for around $20 K sometime next year. (The Slate ). It's an interesting concept. Range 150 to 250 miles, EPA cycle. Motor is 150 KW, or about 200 HP. 1/2 ton+ load capacity. Regular cab, 5 ft bed standard, with assorted, post-purchase options for different body configurations, such as...

I will admit first off, to generally despising cheap Chinese tools for the usual reasons, none of which include their usually being anywhere near being fit for use other than to keep boats from straying from their mooring.

A notable exception for me is when I need an outrageously unusual tap or die, which often can only be purchased from China...

The last dialog balloon speaks to the heart of why the Model T was so universally relied on, regardless the rapid advances in automotive development ! IMG_2725.jpeg

Good Morning! On this day in 1945, the U.S., U.K., and other Allied nations celebrated Victory in Europe Day, marking the defeat of the Nazis in World War II. AMEN!

Hi all,

I have a 1926 Ford Model TT so I am familiar with this forum. But I am about to acquire a 1953 Chevrolet Bel Air with a mystery 1970s engine. I am trying to decipher the engine numbers. Does anyone have suggestions for the best forums for that information?

I purchased three U & J carbs last year as a lot, from one of our Forum posters (thank you). One of them had been all but destroyed. The main jet was bored out and extended up into the venturi like a submarine periscope; the venturi was removed completely and replaced by a cobbled up hunk of aluminum.

The void where the main jet was crudely...

I am trying to find out any information on Curt Austin (I believe out of Roscoe, IL) and his vehicle restorations. His name keeps coming up (in passing) in connection with some high-end restorations, but nothing more than it was restored by Curt Austin. If anyone has any information that they might be able to offer I would be greatly appreciative.

On this day in 1933, President Franklin D. Roosevelt signed the Beer and Wine Revenue Act, reauthorizing the sale of beer and wine and imposing a federal tax on all alcoholic beverages.

so you can still get a vintage car from overseas at the same cost.
i can't afford to do this but i thought some of you might want to read about it. i mean, yes i would like to import a SL600 mercedes from japan. but i can't afford it. :roll:

I am trying to impress my Grandchildren with the value of saving! We have started a penny collection due to their low value (it takes at least 2 of these to buy something) and the amount of space they take up in your pockets. Do you think this is worthwhile or do we need to add nickles and dimes?

pennies.jpg

i bought this tire and rim awhile ago to prevent it from getting into the hands of someone that would make a coffee table or something out of it. it hung in a cracker barrel for years and was just bought at auction and was brought by here for me to try to identify. i couldn't but decided to save it from the modern 'art' folks . rim seems to be in...

“Out Our Way” - J.R. Williams c. 1930
IMG_2383.jpeg

I was expecting a call from Sis the phone rang and I answered without looking. It was a salesman trying to sell me an emergency food kit that could be stored for 25 years and used in times of disaster. I said why would I do that I have a well stocked pantry that has Pastas various sauces vienna sausages canned ham canned chicken tuna and various...

phils new car.jpg

He has always been a Packard and/or Buick guy, but last weekend he bought a Chrysler to add to his fleet. Cars always look better in the photos, but the photos for this one don't do it justice. He got the call today that it is going to be delivered early, tomorrow instead of 2 weeks from now. Here is a link to the auction page...

Since I'm passionate about all things Western, I spotted these Ariat boots on sale and I couldn't resist!

Just for the heck of it, I made an unboxing video, since this type of video seems to be all the rage on YouTube...

Me in Boots.jpg

Hello All,

A car has come up for sale in New Zealand, which appears to be genuine and have an interesting story.

The car is a British-made 1961 Ford Mark 2 Zodiac convertible. Good ones are few and far between.

Essentially, I understand it was purchased either when new, or very new, by the American movie producer Michael John Frankovitch -...

Now doesn't this stir up some boyhood memories!

;)

I got two (2) Simpson 260 meters that are only good for parts. I have fixed mine meter and need to get rid of the rest.
One has case , other doesn’t.
Meter movements look good and the rest is there.
If you paid shipping they are yours. I hate to just trash them.
Email me at address in pictures.
IMG_0260.jpeg

floridasnow.jpeg
Before you put in your contacts. It was slightly cool this am in South West Florid and a lot of lawns in my Mother's neighborhood and when I first looked outside all of the lawns had a slight dusting of white
Until I looked closer
flweed.jpeg
My brother said all of the snow birds refer to this weed as Florida Snow!

Here are some photos of a hubcap wrench that is non-Model T and I just wanted to know what car this is for.

IMG_6389.JPG

IMG_6388.JPG

It is thicker than a Model T wrench and weighs 1lb 4oz.

I am planning to go to the Henry Ford next spring. Preferably after all the snow and mess is gone from up north,
I see that hotels have rooms with discount tickets to the museum and such,
I also would like to see the model T plant and museum while I am that far away from home.kill a couple rocks with 1 bird.
Last time I went in 2003, I was with...

This looks like something I would do.:)

Hello there, some fragments i found when dismantling the starter of my '66 CJ5 have me baffled :
The starter had a tendency to lock the bendix in either the out- or the in position, resulting in the starter not disconnecting, or not engaging.
Long story short, took the starter apart and two fragments of a ring fell out, can not seem to find an...

3 years after moving I will soon have a separate garage/workshop for my Model T and A.
It won’t be as big as I want because of Money, location, and water runoff issues but 22 X 24 with 10 ft walls it is better than nothing.

It took us a year to find a builder that would actually go further than say “That’s not a problem.” and tell us what was...

HAPPY NEW YEAR !

AA1wKIkJ.jpg

jackstand.jpeg

I found this jack-stand in mom's garage any idea as to how old it is or who made them?

“The horse is through.” - Henry Ford

It’s been recounted over the years that Mr. Ford “hated” horses. Perhaps his disaffection for the equine race didn’t extend to a specific gut-wrenching animosity, but there is little doubt Ford’s massive incursions into personal mobility and on the farm resulted in a rapid transition from flesh and blood horse...

Recently, I purchased a vintage Zenith Trans-Oceanic portable (23lbs!) radio. It's in beautiful physical condition and functions (until yesterday) perfectly.

Chronology of events:

The radio worked perfectly for about 8 days as I learned how to manipulate the controls to receive all forms of SW, VHF, Broadcast, etc.
yesterday as I was listening...

Is there any specs for the model R buggy rail?

FOR SALE
1903/1906 Olds Replica
Excellent appearance and mechanical condition
Electric start
Modern engine
New tires and tubes
I never drove it more than 1 mile
Stored on jacks in a climate controlled garage
Spur of the moment purchase but I quickly lost interest because I truly wanted a genuine antique 1903 Olds
$5000 or Best Offer
Located 20...

Here is a photo my boy found, pretty successful hunt, but we were unable to ID the car?
Guessing 1908 to 1912, but have no idea of the make,
Thanks in advance,
Kevin

Off-Topic because this is a Chevrolet. Mystery locking wheel, this is all that is left of it. Can anyone learn me how to remove it?

IMG_1756.jpeg

I presume this meme is intended to plug electric cars. I wonder if they realize just how ridiculous it is ?

We are currently stationed in Bradenton (Manatee County) where we will be waiting out the storm. Jim Cantore is staying at a hotel here in Bradenton and there is a fair chance we will go thru the eye. The boat (65' Bluewater) I do work on, not mine is tied up at the marina down the street in Sarasota (Sarasota county) at the primary marina. I...

FOR SALE
1908 Black Highwheeler Motorbuggy Model 112
Made in Auburn Indiana and sold in Chicago Illinois
Barn find and unmolested
Maintained as preservation quality
Runs and drives
Right hand steering
Chain drive
Bulb horn and Bermuda Bell
Original headlights and tail light
Seats have original horsehair stuffing
All wood solid
All sheet metal is...

Like others, I just received my MTFCI magazine which included the Ballot for choosing Board Members. While I realize this is going to seem biased and slanted, I truly believe there is something that needs to be discussed because it affects the future of the MTFCI club, -which is also a club that has been losing membership AND has been losing money...

Wiring isn't my strongest subject but I am tinkering on my Maxwell and want to do enough temporary wiring to try to get it going before I spend the big money on a correct wiring harness. Unfortunately, much of the original wiring has been removed so I don't have anything to go by for determining the correct gauges of the wires. Could I just go...

I found a barn find modern. 1928 Model A RPU. I have had my eye on this for a few years. They are still out there . It once belonged to my uncle Bill Landers. The gentleman lost his storage and wanted me to have it. I paid $15 for it. Its not a peach but I have a soft spot for trucks as you may know. 20240721_131857.jpg 20240721_131928.jpg...

Anyone know what this vehicle is?
IMG_7774.jpg

Looking for any information this Kwikway Multipurpose Machine. It will grind valves but looks like it can also be setup to undercut armitures and who knows what else.
Not exactly Model T, however it will be used to grind Model T valves.
Any help greatly appreciated, Thanks in advance,
Kevin

A fellow today offered me what seems like a fair trade, a nice looking but unrestored 1916 Maxwell touring car. It has presentable paint and original interior the motor is complete and turns over freely. The top is bad. That is all he or I can say about it. He bought it to get another early car and has no interest in the Maxwell. I have only seen...

We got over 5 of rain last night, I say over 5 because my rain gauge only holds 5 and it is overflowing. Rain stopped for a few minutes so I went to the garage to check the herd everything is high and dry so that's a good thing. decided that my feet were going to get wet anyway so I walked out there bare foot. the neighbors pond is overflowing...

Identify ? Photo notes say the building houses The Wood River Times newspaper.

Hello forum. It has been a while since I posted anything but all is well and the T is still doing good. I have moved on to new projects as I need a car I can drive where the Model t can go. I had a 2014 Ram 1500 with the 5.7 hemi at 160,000 miles and it had the notorious lifter tick and low compression and misfire In cylinder 5. I started teardown...

Would you guys have a look at this carb?
We’re stumped.
Brass float inside of course. With a gear drive adjustable main jet?
1. Apparently, all casting numbers start with M.
2. M3767 sediment “bowl”.
3. A Fairbanks Morse like flutter valve yet a hole below. Adjustable.
Look here if you wish to. Short thread and easy to navigate.

The guys are at...

Thought I'd start something in OT to keep the other forum clear of my disgust..... there's a good thread developing but I did t want to violate content rules....
My homeowners policy has doubled in 6 yrs.
My property tax (poverty tax) has also doubled from $4200 to $8000+.
Groceries are up by 30%-40% or more.
I don't know how much longer we're...

 
I have posted five videos of my neon light bulb collection on FaceBook,

Here is the link :

The group name is Decorative Glow Lamps; Aerolux etc.

If that doesn't work, search FaceBook for Aerolux

I know people who are top notch carpenters, I know they use spirit Levels , plumb bobs stud finders (my late wife wanted one of those) and if you make wine or whisky cask then you need a bung hole borer and a bung cork cutter Well I was looking for the tool to mark where to put the hinges for cabinets, i went to 3 stores to try to find one I was...

Forum I’m fairly new to Facebook due to a strongly worded suggestion from the company I retired from concerning social media. So as a novice I’ve noticed a significant number of warnings about scammers. I think I avoided being scammed when someone listed a “Bruce Compton” rebuilt OF for sale by a John Gupta. The price was low but I inquired by...

I understand that this style of Briggs and Stratton ignition switch was used on various makes from the mid-teens well into the 1920s including Dodge Brothers.

Any other makes for which this switch would be correct?

Also - it's available if anyone needs it. The lock and the light switch handle move freely/not frozen.

The cartoon of DT as VanGo was removed. I thought it was in good humor and not a political statement. I found the cartoon on line and it had been sent to persons of both parties. If you want a copy, email me.

This is Off and On Topic,
The famous Willow Springs raceway is for sale, the oldes still operating road race circuit in the US, run by the Huth family from 1963 it is still mostly in the state when opened in '53.
It has been used by Hollywood for filming famous racing scenes, the last big production being 'Ford vs Ferrari'
And there are at least...

My latest arrival, a 1930 Chev.
I'm having trouble getting any feedback on where to search for the following clarifications -

1. Where my car was made
2. What year the engine was made as its not the original number matching the original paperwork. 1929 was 46 HP v 1930 HP is 50 HP so is this engine a 46 HP?

This forum is easily the most active...

When i was younger my Father and most other men in the neighborhood had a collection of coffee cans and baby food jars
DSC_0303.JPG
And this time I added shelves to the lawnmower barn!
DSC_0302.JPG
Forgot to add this picture
DSC_0304.JPG

Looking for parts for a Stanley Steamer project.
Front and rear axel, boiler, burner, valves and pumps.
1908 era. PhotoPictureResizer_191221_091639673-2195x2270.jpg 10 or 20 hp.

I have a feeling Charlie Russel wasn’t a motoring enthusiast. IMG_1300.jpeg

One day we were out driving and my daughter said I smell electrical. We were pulling into the driveway and sure enough the horn connection under the hood was melted. Upon further inspection we found that the area where the wires go through the firewall were also melted. It was time to rewire the car. We had the gauges redone as well by Instrument...

Since some of you had noticed the 🚢 Titanic model in the background of my most recent video with @flivverchannel, in which Steven and I discussed the Model T hobby at quite some length—I thought I'd share this photo montage of the model under construction.

On April 20th, 2020, with my sister’s assistance, the keel was laid down for the...

I have 2 Columbia High Wheel Bicycles and might be interested in selling one or both of them. Both are 54 inch and both are rideable but the unrestored bike does have very old tires and saddle that should probably be replaced before any serious rides. Contact me for more pictures and information. I am asking $3750 each or $7000 for the pair but I...

In another post you said your family came from New England and went west. Would they have any connection to Bingham Canyon Utah. Southwest of Salt Lake. One of my grandfathers was a prospector who discovered the copper load which eventually grew to the largest open pit mine in the world. At the time my grandfather was there they tunneled under and...

A friend is trying to rebuild a B&B carb the only numbers we can find are SU12A and 54824 the float has a hole through it and is leaking. It is 1-3/4'' high X 1.783 dia. with a 1/4'' inside dia. tube down the center which is where the leak is. We would like to find a replacement if possible. I suggested that we gently cut out the old tube and...

I had never heard of this.

For those who like old tractors, steam and gas, Aumannauction.com has a listing located in Illinois that is selling lots of parts for vintage power applications. Lots of magnetos, oilers, tractor parts, gauges and stuff. None mine and no interest in it!

While watching TCM Sunday night silent movie The Boob , saw this 1920's roadster I could not identify. On the AACA forum, it was thought to be a Cole but no proof positive.

In the movie, they ended up running this car through a fence and then crash into the side of a building. The first thing to go was that wonderful motometer. Seems a shame for...

Rich Eagle has probably seen these photos before. The caption simply said “national park tour buses”. I can’t make out the door insignia to tell if the scene is Yellowstone, so it raised the question for me whether White buses were used in other national parks, and for that matter, besides Yellowstone, were there other national parks in that era,...

I have some MARX trains from the 1950s 60s. One of the engine tenders features Sound of Power, an old style circuit board that creates static. The power is picked up by a wheel that rubs on the center rail. The wheel has gaps in it to stop the electricity on an equally spaced interim.

SO shh shh shh shh shh shh shh shh

QUESTION IS, Who still...

Some of you may have seen the 15 T mentioned in the classifieds. Long story short a good friend of mine who is new to Ts is getting it. The complication is that he is in the bottom of FL, I am in TN and the car is in CO! Rather than ship the car he is planning on getting it in person and naturally would like me to help work out the bugs. Therefore...

If anyone else followed the news there was a big solar flare a few days ago, and the energy is coming through the atmosphere and making northern lights all across the US. They are supposed to be visible all the way down to Texas!
I got to see some here in Illinois, they're green here, pretty neat!
Ignore the white thing, thats the house. Anyone...

So it seems the big EV revolution is dying in the trenches, or on the vine. Suggest watching MGUY on Youtuibe, I think he is also on X and another such media. Quick stories explaining why the EV market is collapsing. My take on the situation is that everybody thought Elon Musk was going to be the next Henry Ford, ushering in an entirely new world...

I'm getting rid of some parts on Ebay and listed this Brass steering wheel spider.

Listed first Brass Era Solid Brass Steering Wheel Spider then Antique Automobile Solid Brass Steering Wheel Spider, Brass Era . It doesn't come up in searching Brass Era , Steering Wheel Spider or anywhere else that makes sense. It was put in a Maritime Wheels...

Hi all, I am retrofitting a faulty ground source heat pump system. I have received this new plastic welder from amazon. The sockets appear correct for US pipe (inches not millimeters). The documentation is sparse. What temperature do I set the welder to melt HDPE pipe? How long do I heat at that temperature a 1 inch and 1.25 inch HDPE pipe and...

Opinions on a 3 in 1 lathe, mill, press for the work needing to be performed for the Model T. I know they are limited, but there is one in good shape in my area for $250. Maybe as something to start with?

Caption states: winner of the Empire City 100 Mile Race, H.J. Koehler, driver of the Buick. October 27, 1906.

Seeing this, I immediately thought of Rich Eagle, who restored an ‘06 Buick. I’ll bet he can tell us more about the car. IMG_1044.jpeg

I just thought if this info was spread more, it might help the poor fellow get his car back.

Perhaps the powers at be would find it in their hearts to loose that dang pop-up ???

Wow! The hype, warnings, and craziness surrounding the upcoming April 8th eclipse is something to behold. If the skies look to be clear my wife and I would like to drive from our home in Michigan's Thumb to a point in Ohio where we can view the totality for a decent period. I know about the event in Richmond but that is a lot longer drive for just...

I was able to get this tool from a school who was getting rid of things. I know it is some kind of belt driven grinder, but I am not sure its exact purpose or what tool to use it on. Any help would be greatly appreciated.

-Joshua

DSC_0296.JPG
There are about 7,000 languages in the world, so why stop at 12 warnings on this bag? Also there are no Califunny Prop 65 warnings visible, Shouldn't they also be plainly visible? Oh where will it all end? :evil: :twisted:

:o :shock: IMG_0992.jpeg Oops! :cry:

I have been looking for another T and can't seem to find anything that isn't junk or overpriced in my area. A fellow recently offered me what seems like a fair price on a 23 DB coupe. The car is pretty much original but the engine was rebuilt a few years ago and started up but then they never did anything else with it. I love T's, I generally can...

As noted above...just heard a bit ago lovely Proncess Kate has cancer where her surgery was done months ago. No word on what type or stage. She's a wonderful person. Prayers to her.