Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here
Support Forum
Complete set of Forum Rules Forum Rules
-
-
Announcement - All Support questions have been moved here
by
AdminJeff » Mon Jan 28, 2019 11:47 am
In the ongoing quest of reducing forum clutter and keeping the topics relevant to the Model T in the Model T forum, this is the new place to ask for all help on the Forums.
Can’t log in? Want to test posting pics without causing clutter here? You don’t have to have a userid to post, and you don’t even have to give your info, just post away and...
- 0 Replies
- 16624 Views
-
Last post by AdminJeff
Mon Jan 28, 2019 11:47 am
-
-
What is it? Maybe 1912 Packard? Maybe 30 or 48?
Replies: 4
by
Rob » Sat Apr 17, 2021 4:33 pm
First post
Thanks for any ideas. It's going to be in a thread and I'd like to be sure about the make and model.
Thanks,
Rob
1D5A043E-9878-4DC4-A3AD-A93A30013A44.jpeg
Last post
Found this high resolution 48 and had to color it. Beautiful cars!
EB4804C6-26CA-4002-87EA-5FC51F427129.jpeg
Thanks again guys.
- 4 Replies
- 1338 Views
-
Last post by Rob
Sat Apr 17, 2021 6:27 pm
-
-
What "barn find" would you like to find?
Replies: 31
by
ModelT46 » Tue Apr 13, 2021 4:43 pm
First post
What Barn find would you like to find and buy.
I assume we are looking for early Fords, but do not limit yourself to Model T Folrds. My choice would be a Model K, perhaps a late production one. My other choice would be the original engine from Model T number one, for the original engine was replaced soon after assembly.
Last post
LA+Stanley3.jpg
LA+Stanley5.jpg
- 31 Replies
- 4089 Views
-
Last post by Dan Haynes
Sat Apr 17, 2021 3:56 pm
-
-
paint help
Replies: 22
by
Jonah D'Avella » Mon Apr 12, 2021 12:56 pm
First post
I am planning to prep and paint my car soon. My original paint plan was Windsor maroon. does anyone here have pictures of model ts with that color? also, i am going to paint the fenders and running boards black.
Last post
This info may have already been shared, I saved it from a Forum post in 2013, sorry about format, jb
Body Colors
Year Ford Color Modern Color Mfgr. Number Formula
1909-14 Red Carmine DuPont 7410AH n/a
1909-14 Green Brewester Green Medium Ditzler 1017 DAL: 46=10 55=30 27=100 49=256 10=464 2=1074
1909-14 Gray Gray DuPont 72092A n/a
1909-14 Blue...
- 22 Replies
- 3639 Views
-
Last post by jab35
Sat Apr 17, 2021 1:20 pm
-
-
Band detachable ears...
Replies: 5
by
NU2theT » Fri Apr 16, 2021 2:08 pm
First post
When I took these apart to get re-lined seemed the first pictured narrow band for reverse had the two straight slot ears and the second narrow band for slow speed had the two rivets. Does it matter which narrow band goes on the related drums, any input would be great.
Last post
The purpose of the detachable ears was to make it easier to replace the bands when sliding them in place with the ears removed
From a previous discussion
By James A. Golden on Monday, November 26, 2018 - 07:57 pm:
The detached ear is normally on the driver's side, but it is not a show stopper to have it on the passenger side.
You can remove the...
- 5 Replies
- 1405 Views
-
Last post by TRDxB2
Sat Apr 17, 2021 11:14 am
-
-
Another whatzit with a prize !
Replies: 21
by
Dropacent » Tue Apr 13, 2021 12:51 pm
First post
First correct answer. Only one clue, it’s T Ford related. The first correct answer can have a choice of one of our spring loaded oil can holders, or my left kidney. I’m still using my right one. 3B0EF058-56E3-4466-A36B-BE903B4A18E5.jpeg
Last post
My little brother wants the kidney, he says he will give it to his dog :mrgreen:
- 21 Replies
- 4019 Views
-
Last post by Jonah D'Avella
Sat Apr 17, 2021 9:49 am
-
-
touring top w/s straps
by
Emeraude » Sat Apr 17, 2021 12:06 am
20210409_212024404_iOS.jpg when I was installing my classtique top on my touring I had the straps from langs for the front bow. Where they were so short and stiff it was difficult to tighten them evenly. It occured to me that a turnbuckle would woould be easier to adjust. I put on the turnbuckle from the hardware store and found it worked much...
- 0 Replies
- 727 Views
-
Last post by Emeraude
Sat Apr 17, 2021 12:06 am
-
-
old ads
by
Angmar » Fri Apr 16, 2021 10:18 pm
Some old ads in one of my Ford supplier books from 1918-1919. Enjoy.
- 0 Replies
- 860 Views
-
Last post by Angmar
Fri Apr 16, 2021 10:18 pm
-
-
Charging battery with 1913 Magneto question
Replies: 6
by
bdtutton » Tue Apr 13, 2021 11:46 am
First post
I am buying my first Model T this week. It is a touring car that was made in October of 1913 so it has a 1914 body style. The car was restored to be the way it came from the factory without a battery or electrical lights. I want to add a battery, turn signals and brake lights for safety.
.
I have two questions about about the simple light bulb...
Last post
Did 2 such conversions. Noticed a single filiment bulb was extremely bright at speed. Used a double contact (lighting both) bulb. The 2nd one i worked on had a 6v single contact. It wasnt in service long. was burned out. Replace with a double contact 12v. 1157?
- 6 Replies
- 1497 Views
-
Last post by speedytinc
Fri Apr 16, 2021 10:05 pm
-
-
Early FMC - let's talk A. Y. Malcomson
Replies: 46
by
Rob » Tue Apr 13, 2021 9:08 am
First post
My interest in early Ford history has led to several observations about one of the two primary (and equally largest shareholders), Henry Ford and Alexander Y. Malcomson. If one goes the Google route, the first impression of Malcomson's and Ford's relationship was one of antagonism, with A.Y.Malcomson pushing or even forcing Henry Ford to build...
Last post
Again, by the summer of 1908, Aerocar fails. This time, creditors and stockholders come after Malcomson.
68213A49-6FFA-4FC9-A2FE-86B5559D15C6.jpeg
Interestingly, he appears to have maneuvered to hold a major portion of shares, with little cash investment, similar to his initial investment years before in Ford Motor Compnay. However, the...
- 46 Replies
- 4676 Views
-
Last post by Rob
Fri Apr 16, 2021 5:44 pm
-
-
Stromberg Stan Howe question or whom ever
Replies: 15
by
dmdeaton » Wed Apr 14, 2021 7:23 pm
First post
My low speed jet is loose and rattles off set point. I was tired after running new engine in today in the shop. Collar seems to be loose that the jet sets in. I will take it apart tomorrow but figured I would ask tonight. High speed is fine. How is resistance held against the screw?
Thanks guys
Last post
Danny, Since you don't have to adjust idle after you get it dialed in you could simply attach a wire or other method to prevent it from rotating until you find one of the barrel retainers. I didn't realize those round barrel types are so fragil.
I have plenty other things to do until parts get here. But not long and she will be on the road!
- 15 Replies
- 2538 Views
-
Last post by dmdeaton
Fri Apr 16, 2021 2:19 pm
-
-
Any Hints on preserving/strengthening a Fiber Gear
Replies: 17
by
JvanMaanen » Mon Apr 12, 2021 7:57 pm
First post
I am just now getting to the water pump on my 08 model SR. The water pumps were built into the radiator similar to the first 2500 T's, but ran off a gear mounted on the flywheel which is on the front of the engine. Mesh was adjusted through rubber pads/shims on the radiator mounting. I found that the gear on the water pump shaft is Fiber. The gear...
Last post
Tim- thanks for the measurement- appears to be just a vanilla 15 tooth 5 DP gear.
- 17 Replies
- 3150 Views
-
Last post by Dan McEachern
Fri Apr 16, 2021 12:51 pm
-
-
Getting ready for that learners permit.
Replies: 12
by
Dollisdad » Sat Apr 10, 2021 4:51 pm
First post
60D47D8C-01C9-46B4-81E4-DC6C11AB80BA.jpeg BCB68BCA-2869-4490-9CE2-52F487B13E0E.jpeg 23452ED0-3AEF-4AF0-9C88-87660BA309B4.jpeg 709B19C3-952B-4CA5-A9D9-B2A0A407DED1.jpeg
Last post
wayne in petal car.jpg
This is me, circa 1954. I am the 5th owner of the pedal car, same extended family since new - which was about the mid-30's. So it had been literally, and figuratively, been through the war .
- 12 Replies
- 1993 Views
-
Last post by WayneJ
Fri Apr 16, 2021 12:17 pm
-
-
Folks and Fords
Replies: 31
by
Dollisdad » Mon Apr 12, 2021 12:44 pm
First post
7315F643-E187-4476-8919-21C4E4AEBCC3.jpeg 0439AA5F-8079-4780-8547-A913A44400A6.jpeg 0161E3CF-E8F7-43FD-B310-B2BBDB4D4286.jpeg E7E18084-21EA-43D0-B407-B3391DB9BF11.jpeg
Last post
Driver licence ? How many times are you smiling when you are pulled over? Easier to identify you . :cry:
- 31 Replies
- 3400 Views
-
Last post by Dallas Landers
Fri Apr 16, 2021 11:41 am
-
-
Any video of installing new upholstery?
Replies: 1
by
Sarikatime » Fri Apr 16, 2021 9:34 am
First post
There are several videos of installing new upholstery on u tube but none show what I need to see. They only show how to put the material onto the springs of the bottom cushion. How do you secure the backrest to the body? Is the upholstery secured to the backrest or only to the body? What keeps the backrest springs from moving around after you...
Last post
Doesn't address a 1921 Touring specifically, but these may be somewhat helpful:
Regarding keeping the backrest spring pack in position, it is suspended by straps that are tacked either to the wood support slats (for cars that have them), or from the upper tack rail (for cars where the spring pack sits directly on the metal seat back).
- 1 Replies
- 848 Views
-
Last post by CudaMan
Fri Apr 16, 2021 11:04 am
-
-
F S Center door sedan Passenger seat
Replies: 1
by
YellowTRacer » Thu Apr 15, 2021 6:47 pm
First post
Original condition center door sedan passenger seat. $100.00 plus actual shipping cost.
Last post
If someone buys this seat, I have the folding support post for the rear of it. Now all you need to find is the front hinged brackets.I'm open to reasonable offers. Part # T8822 and appears to be T9668B, it's hard to make out.
- 1 Replies
- 912 Views
-
Last post by Jeff Hood
Thu Apr 15, 2021 11:14 pm
-
-
Some old pics
Replies: 14
by
Dollisdad » Thu Apr 15, 2021 11:03 am
First post
E08C2642-AFBD-404A-8A4A-41AA55CBACAC.jpeg 3487B6CA-1E8C-47B8-B9CE-2C2D8E1CEF1B.jpeg BF9D29F8-54F7-454D-A709-94CEC5FCD529.jpeg 1781E4E5-87EB-4BAC-9D6F-D45C7F476BE9.jpeg
Last post
Model T's survived but did the buildings - and lamp posts?
Rawlins WY
old4.png
Belfast ME
old3.png
Kennedyville MD
old1.png
Rushville NY
ol2.png
- 14 Replies
- 1722 Views
-
Last post by TRDxB2
Thu Apr 15, 2021 8:55 pm
-
-
- 7 Replies
- 2206 Views
-
Last post by Allan
Thu Apr 15, 2021 8:03 pm
-
-
You want striped bib overalls?
by
YellowTRacer » Thu Apr 15, 2021 6:38 pm
I have the best ever! New old stock Big Macs with old fashioned dark blue wide stripes. Heavy duty material. Still in the wrappers These are great and haven't been available for many years. $50.00 each plus $10.00 shipping. I have 2 pair. One is size 34 X 30 the other is size 56 X 32.
- 0 Replies
- 901 Views
-
Last post by YellowTRacer
Thu Apr 15, 2021 6:38 pm
-
-
Steerable Headlight
Replies: 9
by
Dan Hatch » Wed Apr 14, 2021 6:28 am
First post
Saw this on AACA web site, thought it interesting. Anyone ever seen one of these? Dan
Last post
The Tucker was mentioned above. It may have been the original intention, but none of the 50 or so production cars had them made that way. I think I read where a later restoration made one move. Fuzzy though on this.
- 9 Replies
- 2330 Views
-
Last post by Dropacent
Thu Apr 15, 2021 12:36 pm
-
-
The Speedster in Montana.
Replies: 23
by
Rich Eagle » Sun Apr 11, 2021 9:52 pm
First post
This is the Speedster in the upcoming Montana auction. I know it is of interest to Speedster guys and some would like to see these.
SpdstrMT9.jpg
SpdstrMT11.jpg
SpdstrMT1.jpg
SpdstrMT5.jpg
I asked the auctioneer to send them to me so we could share them. I have no connection with the sale. He felt there might be complaints if he posted...
Last post
T handle! I was on the wrong track as I often am. Sorry. Maybe I should be in the ejection seat :(
I have become obsessed by the toggle switch though.
Thanks for the comments.
Rich
- 23 Replies
- 4220 Views
-
Last post by Rich Eagle
Thu Apr 15, 2021 11:19 am
-
-
Hauling swap meet purchase.
Replies: 1
by
Allan » Tue Apr 13, 2021 8:27 pm
First post
One poster wanted to pre-sell items he was taking to the Tulare swap meet in May and I contacted him by mail and responded to his post. So far, no reaction. I am looking at getting an engine block from the meet to Richmond in the east bay area of San Francisco, or somewhere close enough for a courier pick-up. If anyone from the bay area is...
Last post
Contact made. Now we need to get it carted to San Francisco area. That's where the shipper is.
Allan from down under.
- 1 Replies
- 916 Views
-
Last post by Allan
Wed Apr 14, 2021 8:59 pm
-
-
San Diego area school visit
Replies: 3
by
67pontiac » Wed Apr 14, 2021 11:36 am
First post
Is there anyone in the San Diego area that would be willing to drive their Model T to a school to let the children see one close-up. A friend of mine's daughter is learning about Henry Ford and he asked me to see if anyone would be willing to bring their vehicle to the school for a show and tell session. This would be a great opportunity to get...
Last post
Bill, contact Tony Bowker, if he isn't available he most likely knows someone close by there.
I took my T a week go to the school where my daughter teaches so her students could see and touch a Henry Ford car that they were learning about. I always get a real kick out of watching the different expressions when people are looking at the car. It's...
- 3 Replies
- 1177 Views
-
Last post by SurfCityGene
Wed Apr 14, 2021 6:23 pm
-
-
Tim’s stromberg choke remake
Replies: 9
by
dmdeaton » Tue Apr 13, 2021 5:45 pm
First post
Has anyone mounted one on a 26/27 yet? Column has horn wire channel which is right in the way of clamping it . :cry:
Last post
Love mine!
- 9 Replies
- 1811 Views
-
Last post by Shane Lach
Wed Apr 14, 2021 4:55 pm
-
-
Pic posting size issues
Replies: 9
by
TWrenn » Tue Apr 13, 2021 10:29 am
First post
When this forum went to this new format years ago, one of the pro's of it was to be able to post pics of just about any size with no problems, as opposed to the old forum. Steve Jelf used to always promote that.
Seems lately tho, about 80% of the time I try to post a pic, of usual MB size , it gets tossed out because the PIXELS for Height and/or...
Last post
Perry...that's too funny!! Thanks! :lol:
- 9 Replies
- 1538 Views
-
Last post by TWrenn
Wed Apr 14, 2021 3:17 pm
-
-
Vintage BMW motorcycle at Chickasha
Replies: 9
by
Mike Lebsack-Iowa » Fri Mar 26, 2021 5:16 pm
First post
Does anyone know, or have the contact information, for the fellow who had the old BMW motorcycle that had the auxiliary rear axle setup that powered the sidecar? If so please share here. Thanks, Mike Lebsack
Last post
For info on the vintage BMW motorcycle that was at Chickasha, contact Peter Banfield at 719-577-0003. J Burns
- 9 Replies
- 2585 Views
-
Last post by jburns79se
Wed Apr 14, 2021 2:52 pm
-
-
Chinese Electric Model T Replicas?!
Replies: 11
by
1194668jc » Tue Apr 13, 2021 3:40 pm
First post
I won't even explain anything, the title says enough...
Last post
I like it but will not purchase one. I don't play golf and I also suspect that getting parts would be a nightmare.
The Chinese manufacturer used the Ford name in the advertisement, but I doubt that Ford can do much unless somebody from the USA buys one. I think that Ford could require that the U S purchaser buy a license. I'm not a lawyer, but I...
- 11 Replies
- 2779 Views
-
Last post by John Codman
Wed Apr 14, 2021 1:47 pm
-
-
Klaxon 18B Delco-Remy
Replies: 9
by
Mikey1968 » Tue Apr 06, 2021 2:08 pm
First post
Hello all!
Would a Klaxon 18B Delco-Remy make a good ahooga horn for a 26 Touring? Time period correct?
Thanks,
Mike
Last post
By the way, thanks for the link. Wish I knew parts were available. Would have bought the gaskets as that was a little work. I bought some FelPro gasket material which is fairly thick but worked fine. Used a leather punch for the bolt holes.
Wonder if we can post short videos?
- 9 Replies
- 2019 Views
-
Last post by Mikey1968
Wed Apr 14, 2021 1:43 pm
-
-
Any word on OCF?
Replies: 2
by
john in kzoo » Wed Apr 14, 2021 7:32 am
First post
Wondering what the word is on OCF for 2021?
I see that Motor Muster is moving forward
John
Last post
Word from a contact at Greenfield Village is that as of now they're going ahead. Just watch the website for updates.
- 2 Replies
- 1065 Views
-
Last post by Oldav8tor
Wed Apr 14, 2021 1:05 pm
-
-
1914 windshield?
Replies: 2
by
Dan Hatch » Wed Apr 14, 2021 10:32 am
First post
I took a pair of 14 windshield hinges apart to clean them up and found what looks like brass plating on the screws and nuts that hold hinges together. Spring inside the hinges looks to have copper plating on it. Has anyone ever seen that? Dan
Last post
Thanks Larry. I will remember that when I get to my 14. Dan
- 2 Replies
- 764 Views
-
Last post by Dan Hatch
Wed Apr 14, 2021 10:57 am
-
-
1914 1915 radiator
Replies: 7
by
greenacres36 » Tue Apr 13, 2021 1:20 pm
First post
I’m still fairly new with model Ts. I just purchased a 1915 roadster. I’m probably going to need to put a radiator on it as it has the original round tube on it. It’s not in the greatest shape and it probably leaks. I haven’t put water in it yet as the car has been sitting idle for About 49 years. Hard to believe I put gas in it and it started but...
Last post
14 and 15 radiators will interchange, but are not the same as Keith pointed out. A 15 radiator uses a radiator round tube bent to a slight V for the head light wire. I've also noted on two different 15 radiators, the factory moved the priming wire hole down, and slightly to the left. Why is anyones guess. Sometime in 1914, Ford stopped using the...
- 7 Replies
- 1580 Views
-
Last post by Original Smith
Wed Apr 14, 2021 10:47 am
-
-
Construction Plan wanted for Ocean to Ocean #2 car wanted.
Replies: 12
by
Jack Putnam, in Ohio » Mon Apr 12, 2021 8:28 pm
First post
I would like to build a replica of the #2 Ford car that was in the 1909 race. I am looking for information on how the body was constructed. Does anyone have plans of pictures of the body construction it would be greatly appreciated. This picture is a replica of a car driven in the 2009 race/ jputnam(at)wcoil.com
Last post
Before you get started be sure an authenticate some of the versions that currently exist. There are many differences in the old photos of the original and the museum pieces. Seats, side lights, headlights, exhaust etc. Also there are pictures of #1 that could help as well
Previous thread about NO2
no2-000.jpg
no2-colorized.jpg
no2-3.jpg...
- 12 Replies
- 2604 Views
-
Last post by TRDxB2
Wed Apr 14, 2021 2:12 am
-
-
Joshua Tree Tour - April 2021
Replies: 11
by
TonyB » Wed Apr 07, 2021 12:53 am
First post
Model Ts from clubs are on a tour to the Joshua Tree area in Southern Cal. During the day, by the way the weather was just perfect, we saw several wrecked cars but no Model Ts. The only Ts were the seven cars on the tour.
4002CE91-9F42-4C5E-8639-763FD54C1039.jpeg
The roads into the park are all paved but once in the park we searched out dirt...
Last post
The description of the last day was held up with technical problem downloading the pictures from Karen’s equipment. I of course just use my iPhone for everything videos, pictures, web site updates and the occasional phone call. Thanks Karen for your pictures and persistence getting me the pictures, as with no pictures some guys think it never...
- 11 Replies
- 2143 Views
-
Last post by TonyB
Wed Apr 14, 2021 1:12 am
-
-
Weaver axle stand
Replies: 6
by
Tom VanMeeteren » Mon Apr 12, 2021 8:55 pm
First post
I picked up a Weaver axle stand at a local swap meet on Sunday. Tried looking up the model that I have and all I was able to find is the more deluxe version made by Weaver. does anyone have any factory or information on this model?
Last post
Mark, yes it is the axle stand in your posted site. Thank you for the info.
- 6 Replies
- 1709 Views
-
Last post by Tom VanMeeteren
Tue Apr 13, 2021 10:38 pm
-
-
- 11 Replies
- 3708 Views
-
Last post by VowellArt
Tue Apr 13, 2021 10:29 pm
-
-
Stromberg passage plugs
Replies: 4
by
dmdeaton » Tue Apr 13, 2021 2:13 pm
First post
Carb runs great on new engine start, but dribbling a little fuel from the passage screws. They were a little loose but don’t want to snug them in until I ask. Not tapered and nothing to seal on the lip. I am thinking a touch of pipe dope maybe. 91CEE119-B52D-4B5E-8127-80967E763A7D.jpeg 8417E65E-E303-416E-9FB9-80FA983AC312.jpeg
Last post
I understand that but the burr needs to knocked down also or it doesn’t have a flat surface for the edge of the small collar on the screw to seat against and seal. I deburred the threaded hole surface and snugged it down and all is fine. The burr was keeping it from seating 100%.
- 4 Replies
- 1044 Views
-
Last post by dmdeaton
Tue Apr 13, 2021 5:22 pm
-
-
Buffalo wheel caps
Replies: 8
by
Marshall V. Daut » Mon Apr 12, 2021 6:18 pm
First post
A friend just bought a Model T speedster with buffalo wheels. He feels the caps are in bad condition, so he would like to replace these with better ones. Does anyone repop these or do we need to advertise for originals? I don't see them in any of my catalogs. What is a fair price? Are there left and rights? I am not a speedster guy, so this is new...
Last post
Looks like the castings may have never been buffed and polished except for the face. Take them off the car and give them a good buff and polish job. They may need more than just Rouge and a polish though. Some emery and a sewn wheel might be in order 1st.
- 8 Replies
- 1699 Views
-
Last post by Dan McEachern
Tue Apr 13, 2021 3:21 pm
-
-
Besides your T, what other Ford would you wish to own?
Replies: 51
by
ModelT46 » Tue Apr 06, 2021 5:20 pm
First post
A Model F would be nice, say a 1904 with a rear seat unit.. A 2 cylinder auto with a strong engine over the Model A, similar to the AC engine, I assume. Not as many around as the NRS series. Eligible for the one and two cylinder tours. Anything 1904 or older are in a special class.
Last post
I would like to have a 1966 Mustang convert like i bought new and lost!!! :oops:
- 51 Replies
- 5812 Views
-
Last post by Bud Delong
Tue Apr 13, 2021 3:12 pm
-
-
- 1 Replies
- 901 Views
-
Last post by Steve Jelf
Tue Apr 13, 2021 2:33 pm
-
-
1926-27 Coupe Info Wanted
Replies: 1
by
ModelTWoods » Tue Apr 13, 2021 12:14 am
First post
If you've personally re-assembled your 1926-27 coupe, contact me here and I'll contact you by email or messenger on this forum. I have some questions that I need answered before I proceed any further.
Last post
Hi Terry : I have a Canadian '26 Coupe that has never been messed with .It was painted as a used car in 1965 without even removing the rear fenders. It still has the engine pans held on with square nuts and Made in Canada markings everywhere. If I can be of any help, don't hesitate. Cheers : Bruce
- 1 Replies
- 689 Views
-
Last post by Bruce Compton
Tue Apr 13, 2021 12:58 pm
-
-
Cheap co-co floor mats from Ikea
Replies: 10
by
Sarikatime » Thu Mar 25, 2021 3:10 pm
First post
Got these co-co mats, 24x35 from IKEA that have a heavy rubber non skid backing. ( under 8 dollars each ) The one for the back is too big but the one for the front is a little shy below the firewall. Easy to cut with a knife and looks as good as the ones the parts suppliers sell. Sorry guys, we are cheap. Make sure you make a paper template for...
Last post
Gosh! she looks like a nice girl who would like a ride in a Model T.
- 10 Replies
- 2224 Views
-
Last post by Rich Eagle
Tue Apr 13, 2021 12:45 pm
-
-
MODEL T MUSEUM APRIL HOURS UPDATE
by
NB1926 » Tue Apr 13, 2021 11:54 am
Hey Y'all!
The Model T Museum's hours have updated! The museum is back open on Sundays from 10-4. Masks are no longer required but you can wear one if desired. Our staff will be wearing masks interacting with our visitors and members until further notice! Thank you guys and hope to see you all soon!
- 0 Replies
- 583 Views
-
Last post by NB1926
Tue Apr 13, 2021 11:54 am
-
-
Who inspired Henry Ford?
Replies: 16
by
Fordwright » Sun Apr 11, 2021 9:26 pm
First post
Henry Ford was fascinated with watches as a child. He learned to take them apart and reassemble them at an early age.
Georges Frederic Roskopf developed “La Prolétaire” (People's Watch) in 1867, intended to be affordable by the masses.
I suppose it's possible that young Henry would have known about him and his watch, n'est pas?
Last post
Has anyone ever attempted to calculate how much of the total money the Ford Motor Company made up to 1936 actually went to the Ford family?
The question is rather elusive. The profits of the Ford Motor Company where used for expansion of the company, dividends to stock holders (family members had stock). and salaries (family members were...
- 16 Replies
- 3174 Views
-
Last post by TRDxB2
Tue Apr 13, 2021 11:12 am
-
-
On the Road Again
Replies: 9
by
Jugster » Mon Apr 12, 2021 5:58 pm
First post
On the Road Again b flat.jpg
.
So I went for the second of the two vaccine shots about a month ago and from what I've been told, that's supposed to do it. Hard to believe that after twelve months of hiding at home, grocery shopping at dawn to avoid humanity and the quest for toilet paper, it could be over so suddenly and so easily. Well, maybe...
Last post
We may not be able to express ourselves as well as Bob but hopefully all of us will be able to share a similar experience this year. A brighter future awaits!
- 9 Replies
- 2003 Views
-
Last post by Oldav8tor
Tue Apr 13, 2021 9:39 am
-
-
Cleaning brass parts
Replies: 16
by
bdtutton » Fri Apr 02, 2021 10:16 pm
First post
Hello,
I don't know much about brass parts on a Model T. I was wondering if these parts could be cleaned up and how to go about it.
image2.jpeg
image1-7.jpeg
Last post
Thank you everyone for your feedback....Besides this forum I have looked at several non-Model T forums and there are a lot of different opinions about what works best for brass and the process of getting it done. I have asked my wife to order small bottles of several different brass cleaners and I am going to do some testing of my own. If I find...
- 16 Replies
- 3039 Views
-
Last post by bdtutton
Tue Apr 13, 2021 1:25 am
-
-
Radious rod ball off
Replies: 1
by
Mopar_man » Mon Apr 12, 2021 10:11 pm
First post
So when I went to hook up my Radious rod it didn't line up. I'm thinking that I have to jack up the frame of the car to allow the front suspension hang and line it up that way. Am I missing something?
IMG_4323.jpeg
Last post
Jack the radius rod up and pull back at same time, it'll go in.
- 1 Replies
- 710 Views
-
Last post by Mark Gregush
Mon Apr 12, 2021 10:44 pm
-
-
Does this spark rod lever go up or down?
Replies: 14
by
Mopar_man » Sun Apr 04, 2021 11:23 am
First post
So I'm not sure if the person who put this together before had it on correct. Does the bend go up or down?
Like A
IMG_4287.jpeg
Or B
IMG_4288.jpeg
Last post
Thanks Steve I will make sure the key fits. You'll see on the other post I think it was my fault the key didn't fit. Ha! I'm learning.
- 14 Replies
- 2464 Views
-
Last post by Mopar_man
Mon Apr 12, 2021 9:56 pm
-
-
Steering Wheel Key
Replies: 10
by
Mopar_man » Mon Apr 12, 2021 3:51 pm
First post
So my steering wheel key seemed to be loose. It looks like it is tapered like a wedge. so I ordered anew one and it won't fit when the wheel is on the pinion.
New on the left old on the right
IMG_4311.jpeg
You can see the small gap on the pinion with the old key.
IMG_4309.jpeg
Once I tighten the big steering wheel nut with the old key the...
Last post
So I called Steve at Lang's (he is always helpful). He said I had the correct size key. He also suggested that I tap the key into the pinion slot. When i tried it before I was just pressing it in with my fingers. I also think you are correct when you say nothing fits perfect. Ha! I should know better (new pinion shaft, New key, and old spider)....
- 10 Replies
- 1759 Views
-
Last post by Mopar_man
Mon Apr 12, 2021 9:54 pm
-
-
26 Roadster Steering column
Replies: 13
by
Bill Coyle » Tue Apr 06, 2021 1:56 am
First post
On the 26/27 coupe, roadster, touring, and tudor, which side of the firewall should the steering column flange mount ? I've looked over quite a few pics on the net and it seems both ways are quite common. I believe on the pre 26 models they all mounted to the inside (passenger side) of the firewall.
I'm thinking the 26/27 also mounts on the...
Last post
20210406_210020.jpg
In and hooked up! On the dash, I remember reading about a padding that went between the column and the lower bracket. Does anyone use it? I still have the original padding between the dash and the column.
Thanks, Bill
- 13 Replies
- 2220 Views
-
Last post by Bill Coyle
Mon Apr 12, 2021 5:09 pm
-
-
Faster, Better or Cheaper- Pick Two
Replies: 8
by
Fordwright » Sun Apr 11, 2021 3:41 pm
First post
I used to believe that old axiom when I was younger,
then I went to work and learned it was mostly a story for telling customers.
But successful people are breaking that paradigm all the time - Henry Ford was one of them.
General Motors tried to corner the market on automobiles and would have been happy perpetuating that myth,
but Henry Ford was...
Last post
But successful people are breaking that paradigm all the time
You are correct Sir! I will add a 4th part to this....The ability to succeed at doing the three listed & still make damn good money while the others flounder & are happy to break even at the end of the year . Unfortunately in doing this we do have to make some sacrifices in our...
- 8 Replies
- 2355 Views
-
Last post by Fordwright
Mon Apr 12, 2021 12:09 pm
-
-
Has the Cimorelli Model T Site been Hijacked?
Replies: 8
by
CudaMan » Sat Apr 03, 2021 7:43 pm
First post
I tried to go to the Cimorelli Model T site and got something completely different, has the site been hijacked? :(
Last post
I don’t care what the issue was, is someone going to keep it up now?
Thanks
Why don't you call Tony at (571) 331-0542 or email him tony@cimorelli.com and ask?
- 8 Replies
- 2155 Views
-
Last post by TRDxB2
Mon Apr 12, 2021 11:18 am
-
-
How does the turtledeck attach to my '21?
Replies: 9
by
Chris Haynes » Sun Apr 11, 2021 1:52 pm
First post
I have the turtledeck itself. Nothing else. I can't figure out how it attached to the frame. There are no brackets.
Last post
I used plywood for the 1919 on my car deck instead of using the wood slats as original. That was over 30 years ago as it was a piece of cabinet grade plywood. I’ll bet Ford would have used a single sheet of plywood if it was cheaper and readily available. Anyway it’s held up well.
- 9 Replies
- 1978 Views
-
Last post by John kuehn
Mon Apr 12, 2021 8:56 am
-
-
- 0 Replies
- 947 Views
-
Last post by perry kete
Mon Apr 12, 2021 8:10 am
-
-
Modern coil
Replies: 2
by
Dan66zoomer » Mon Apr 12, 2021 2:45 am
First post
Hi everyone new to this forum ,,I am building a Roadster pickup 1926 in the UK ,, :?: my question is is can I use a modern coil through an atwater kent type h old style distributor ,,thanks for your time
Last post
Be sure to get a coil that is for points ignition, not for electronic ignition, as the Amperage of the coil for electronic ignition is too high and will fry the contact breaker points.
As you are using an old distributor i asume your car is still 6Volts, most 6Volt coils are not available for electronic ignitions.
If your car is 12 Volts be sure...
- 2 Replies
- 1110 Views
-
Last post by Kaiser
Mon Apr 12, 2021 7:37 am
-
-
unknown tool
by
donald4ham » Mon Apr 12, 2021 12:09 am
any one know what this tool is used for? Looks like a tool for cutting oil grooves in babbitt bearings, just my guess
- 0 Replies
- 919 Views
-
Last post by donald4ham
Mon Apr 12, 2021 12:09 am
-
-
- 21 Replies
- 5517 Views
-
Last post by Rich Eagle
Sun Apr 11, 2021 9:41 pm
-
-
early 1919 Clum ignition switch
Replies: 1
by
SteveBoothroyd » Sun Apr 11, 2021 5:38 pm
First post
I have an early 1919 CLUM pin type ignition switch that I am working on.
It has the cast switch lever and the back plate which is made of composite layers of cardboard is separating and has burn marks at some of the terminals.
The back plate has the following stamped: 10072 CLUM MILWALKEE PAT APPL FOR
I know that some of the suppliers have newly...
Last post
Steve, I have one with a working key and partial ammeter. It needs work but may be worth a look. I’d call it very restorable. Tmorsher@icloud.com to reach me for pics.
- 1 Replies
- 746 Views
-
Last post by Dropacent
Sun Apr 11, 2021 9:11 pm
-
-
Stripped/Cracked head bolt?
Replies: 33
by
Its_Always_T_Time » Fri Apr 09, 2021 7:20 pm
First post
Hello everyone, hope you and your cars are all well.
I was replacing Lizzie’s Kingston carburetor with a new Holley NH as the old Kingston was flooding badly and I figured I would pull it out and rebuild it and in the meantime use the rebuilt NH and in the end I’d have a spare carburetor ready to go.
As I got the new carburetor in, I noticed...
Last post
You may want to take a look at this Youtube video for some ideas on how to remove broken bolts and studs from blind holes.
Respectfully submitted,
Trent Boggess
- 33 Replies
- 3375 Views
-
Last post by TrentB
Sun Apr 11, 2021 8:58 pm
-
-
Birdhaven
Replies: 1
by
Oldav8tor » Sun Apr 04, 2021 3:03 pm
First post
So, what's up with Birdhaven? I see the Fun Projects website is down...only the Texas T site appears to be up and it doesn't list FP parts nor has it been updated for a long time. I know they had some supply issues and some parts were not available.... have things gotten worse? Is a telephone call the only way to find out what parts they do have?...
Last post
Birdhaven is evidently getting a few of those parts back in stock.
They had that small bar wrench recently.
They are keeping a back order list for other parts that are becoming available a few at a time.
One of those popular parts was the Fun Projects Generator Voltage Regulator/Cutout and they recently got a few of those.
Perhaps the most...
- 1 Replies
- 1000 Views
-
Last post by J1MGOLDEN
Sun Apr 11, 2021 5:41 pm
-
-
1925 T Model Tudor previous owner
Replies: 2
by
Kevan » Sat Apr 10, 2021 7:08 am
First post
Hi.
I have recently purchased a 1925 T Model Tudor that was sold at Motorcar studio Atlanta in 2016.
I was shipped to Melbourne Australia.
I'm looking for the previous owner that would have the history of the car.
I'm enjoying the vehicle and still learning how to drive the car. It's a fantastic car to enjoy.
Any help would be greatly...
Last post
Beautiful Tudor! I’m sure you have thought of this, but I will suggest it anyway. The title should have the prior owner(s) name, the date sold/bought and the place of the sale. Even if it is a new title, with only the seller you bought it from, the seller on the title should have records in their files of the estate or person they obtained it from...
- 2 Replies
- 955 Views
-
Last post by jiminbartow
Sun Apr 11, 2021 5:18 pm
-
-
1904 - the fastest woman alive, and a Ford
Replies: 9
by
Rob » Sat Apr 10, 2021 11:12 am
First post
Not sure if they were accurate, but 999 was owned at one time by a woman. And, she was reported to be the fastest woman on earth. In February 1904 the old racer and it's mate were reportedly purchased by stage star Leah Russell:
AFE17C6B-DE40-41AF-905C-9E7AD899B53C.jpeg
77BED56D-FC2B-4F98-8FB2-24A961191037.jpeg
In March, Ms. Russell made...
Last post
Does the 999 exist today?
- 9 Replies
- 2379 Views
-
Last post by Chris Haynes
Sun Apr 11, 2021 1:47 pm
-
-
Model T trailer
Replies: 11
by
Retro54 » Sat Apr 10, 2021 12:31 pm
First post
Thought you kids might enjoy this one.
I stumbled on this cart, a near 10 minutes from my house on Craigslist. It was priced for weeks between. 100 and 200 bucks, and for what it seemed to be I thought that was a bit much. Upon checking the add this past Monday, a price drop to $40 made me text the guy immediately and set a time to pick it up....
Last post
Kewl!
Does it dump?
: ^ )
Amazingly well, the mechanism is well engineered. Gonna be useful!
- 11 Replies
- 2355 Views
-
Last post by Retro54
Sun Apr 11, 2021 1:03 pm
-
-
Rare steering column support bracket
Replies: 2
by
FATMAN » Sun Apr 11, 2021 12:27 pm
First post
I took this support bracket off a early column but was told it was a rare style, might be 1925 only, no idea , not in the books, what do you think ? Bob
Last post
Thank you, Steve, Bob
- 2 Replies
- 971 Views
-
Last post by FATMAN
Sun Apr 11, 2021 1:02 pm
-
-
My Model T parts are going on a tour
Replies: 6
by
DHort » Thu Apr 08, 2021 12:48 pm
First post
I had a part shipped from Indiana to Milwaukee. Indy to Aurora, IL, to Milwaukee suburbs, and now it is at the Chicago International Dist Center. Makes me wonder where they are going to ship it next. To OZ?
Last post
Vehicle transport is the same.
It’s just a larger package in the mail
so to speak.
Folks don’t realize that logistics dictate a full trailer goes down the road containing cargo that gets closer to the destination.
It makes sense from a shipping standpoint 🤔
FJ
- 6 Replies
- 1745 Views
-
Last post by FreighTer Jim
Sun Apr 11, 2021 11:23 am
-
-
The 7th Annual Luray is less than 5 weeks away! May 14 & 15
Replies: 1
by
James_Lyons-WV » Sun Apr 11, 2021 10:19 am
First post
The 7th Annual, Mid-Atlantic prewar swap meet in Luray, Virginia is almost here! We have vendors from Florida, Alabama, Michigan, New York... and all points in between. As of this writing, we have 49 vendors occupying 93 spaces - with 33 of those vendors coming from out of state! We've broken all of our previous spring meet records and there are...
Last post
I sold more Model T parts at Luray in one day than I sold in Hershey in 4 days !!!
Great swap meet!!!!!!!!!!!
- 1 Replies
- 851 Views
-
Last post by Executive Director
Sun Apr 11, 2021 10:29 am
-
-
56TH Annual Little Hershey Swap Meet
Replies: 2
by
FATMAN » Sat Apr 03, 2021 2:02 pm
First post
Up coming swap meet
56TH Annual Little Hershey Swap Meet
May 15th at the
Boone County Fairgrounds
put on by the Model T Ford Midwest chapter
Last post
Getting closer , call Dave and get your spots while they still have some, Bob
- 2 Replies
- 972 Views
-
Last post by FATMAN
Sun Apr 11, 2021 10:04 am
-
-
Identify this Transmission? 1918 Cyclecar
Replies: 18
by
Cyclecar Guy » Wed Jul 22, 2020 11:27 am
First post
IMG_8309comp.JPG IMG_8277comp.JPG IMG_8309comp.JPG IMG_8283comp.JPG This is a prototype Cyclecar built from 1918-1925 in Hanlon, MA by a Dr. Kirk Hanson, who left virtually no information behind. The engine is a 1923 Henderson motorcycle engine. I am told the rear end is Model T. Does anyone recognize the transmission? It is a 3-speed with...
Last post
That’s a neat little car Jeff. Did the original builder build any more or just the one car? Would be interested in hearing more about it. Is it a complete car? What is the track and wheelbase ? I am restoring my 13 Zip cyclecar and another old car friend is in town is restoring his ‘14 Scripps Booth.
Todd
Todd, I went back to this thread and...
- 18 Replies
- 5375 Views
-
Last post by Cyclecar Guy
Sun Apr 11, 2021 8:36 am
-
-
Where did you discover your Model T?
Replies: 39
by
ModelT46 » Sat Apr 03, 2021 3:45 pm
First post
I found my first Model T Ford in parking garage that was a part of the Minneapolis Pure Oil headquarters. In early September of 1946 I was seeking an early automobile, preferable before 1912. There was an advertisement in the Minneapolis Star Journal for a 1909 Ford. I called and was told it was owned by the Pure Oil Company and was stored in...
Last post
The chasis on the speedster is long - has been extended. How?
The front axel was moved and lowered in front of the radiator. To keep the steering column in place the cowl and dash was moved forward as well. Haven't looked close enough to see how they lengthened the wishbone. Oh, and they hacked up the firewall to allow room for the head. Will...
- 39 Replies
- 5334 Views
-
Last post by Petrah Phyre
Sun Apr 11, 2021 12:20 am
-
-
Couldn't resist
Replies: 11
by
Oldav8tor » Fri Apr 09, 2021 11:54 am
First post
Last Saturday I was invited to the county museum and historical village. They wanted to talk to me about bringing my '17 Touring to the museum for some of their events this summer. I took the museum director and her husband for a ride and it was a good day. There was a wedding going on while I was there and I let the bride and groom take some...
Last post
Thanks Bill....this came about because I let the historical society auction off Model T rides for two couples which netted the museum over $300. I took the Model T over to talk ride logistics with the administrator and they were blown away to put it mildly. They loved the car, loved the history and would like me to participate in a number of their...
- 11 Replies
- 2373 Views
-
Last post by Oldav8tor
Sat Apr 10, 2021 6:42 pm
-
-
Turtle Deck
Replies: 16
by
Original Smith » Fri Apr 09, 2021 2:21 pm
First post
I've wondered about this term for years. I have a close friend who is a whiz at digging up information on the internet. Turtle deck is a nautical term applied to automobiles as early as 1911. It doesn't appear that Ford ever adopted that term however.
Last post
Suzanne, the other side of the tracks is where the low income people live.
Do you call the Interstate the highway, the freeway, or the expressway? We use all three terms here.
The Freeway has on and off ramps, the Highway has streets that intersect with it (not ramps), and the expressway has fewer streets intersecting (with stoplights).
And...
- 16 Replies
- 2803 Views
-
Last post by Susanne
Sat Apr 10, 2021 6:16 pm
-
-
Scandinavian linings - no longer made?
Replies: 8
by
JohnH » Fri Apr 09, 2021 5:45 am
First post
Time to reline my brake band, and order some other parts. Surprised to see Lang’s no longer list Scandinavian linings, and Snyder’s say they’re no longer made for 26-27, and out of stock anyway for the earlier cars. Just curious if Scandinavians are now obsolete and if they will be reproduced again. My other favourite linings, once made by Mark...
Last post
The majority of these are original branded SCANDINAVIA & I always check them for smell as in musty - I don't buy those - these in my stock are all prefect to run. I've collected them for many years.
I do have a few sets from the seventies & eighties (way before tar babies ) when they were still the same weave BUT THEN, someone had the bright idea...
- 8 Replies
- 2144 Views
-
Last post by RajoRacer
Sat Apr 10, 2021 4:41 pm
-
-
Late '26 Touring upholstery
Replies: 34
by
Mustang1964s » Mon Mar 01, 2021 8:28 pm
First post
I was able to get the sheet metal work done by a professional. A fellow club member.
The car looks great.
The upholstery kit from Classique looks great. The car was converted to a white interior before my father-in-law became caretaker back in '63.
So back to white it goes.
Here are the new springs.
Front and rear.
Front_Springs.jpg...
Last post
This how I am thinking the lower corners should be.
Sorry I should have included it in the previous post.
Should the cotton padding be brought down a little bit?
IMG_3010.jpg
- 34 Replies
- 4144 Views
-
Last post by Mustang1964s
Sat Apr 10, 2021 4:14 pm
-
-
Is Leading Fellow Model Ts For a Day over Remote Dirt Roads a Good Idea?
Replies: 27
by
NorthSouth » Fri Apr 09, 2021 7:15 pm
First post
-
Is leading fellow Model Ts for a day over remote dirt roads a good idea?
-
IMG_20210406_114853215.jpg IMG_20210406_114026683_HDR.jpg IMG_20210406_141217495_HDR.jpg
IMG_20210407_172041264_HDR.jpg
Last post
I think the higher clearance and narrower tires do help. Smooth tires with no tread would probably help, too.
- 27 Replies
- 3383 Views
-
Last post by TXGOAT2
Sat Apr 10, 2021 2:44 pm
-
-
Back on the road, gotta eat, gotta sleep.
Replies: 19
by
Dollisdad » Fri Apr 09, 2021 3:04 pm
First post
BCDDE615-7AB6-4F83-A885-B4E183B62FDE.jpeg 7B829D9E-D615-414F-BF54-1189F2418939.jpeg 571C7F17-C30B-4F49-B087-180BFC40ACB5.jpeg 97DCDE99-1913-4BB7-9852-73CED82231F6.jpeg
Last post
I think that is your best batch of shots yet. The variety is fantastic. Thank you.
- 19 Replies
- 1982 Views
-
Last post by DHort
Sat Apr 10, 2021 12:06 pm
-
-
Birdhaven
Replies: 24
by
Oldav8tor » Sun Apr 04, 2021 3:05 pm
First post
So, what's up with Birdhaven? I see the Fun Projects website is down...only the Texas T site appears to be up and it doesn't list FP parts nor has it been updated for a long time. I know they had some supply issues and some parts were not available.... have things gotten worse? Is a telephone call the only way to find out what parts they do have?...
Last post
If all other vendors operated their business as a sideline, we'd hear and see complaints about them like we hear and see about Howell's, here in Texas.
Is Howell's a sideline?
Steve, Although Howell's sells direct (that is, if you ever get the parts you paid for), I consider them to be a manufacturer , instead of a vendor. They certainly...
- 24 Replies
- 4375 Views
-
Last post by ModelTWoods
Sat Apr 10, 2021 12:23 am
-
-
Old 1925 Pickup Photo
Replies: 9
by
Original Smith » Thu Apr 08, 2021 4:50 pm
First post
I've had this photo for years. I believe it to be a prototype photo. I've asked several people familiar with the Detroit area, and it is believed the photo was not taken there. Any ideas?
Last post
There's no guarantee that a wall present in 1925 is still there, and cemetery is just a guess, but if somebody wants to look up the street views for cemeteries around Highland Park, go for it. I have other things to do. :D
Screen Shot 2021-04-09 at 12.41.11 PM.png
- 9 Replies
- 2060 Views
-
Last post by Steve Jelf
Fri Apr 09, 2021 1:49 pm
-
-
Should I Care About Skirt Cuts?
Replies: 2
by
ivaldes1 » Tue Apr 06, 2021 10:35 pm
First post
My skirts came from another Speedster. They have previous cut outs on them. See picture. I suspect these will be covered when I put the flat wood Speedster body and firewall on?
Last post
are you planning on putting a top access cover where the battery goes? My speedster doesn't have one(I didn't build car), so the battery is a pain to get to from underneath.
Tim
- 2 Replies
- 1214 Views
-
Last post by Tim Williams
Fri Apr 09, 2021 1:30 pm
-
-
Another whatzit, WITH A PRIZE !
Replies: 18
by
Dropacent » Sat Mar 27, 2021 8:35 pm
First post
Here is another whatzit. The first correct answer will get one of our spring loaded firewall mounted oil can holders sent to them ( if the winner wants one ) 737A2E1C-7AE0-48A5-966F-A26FCC6A4516.jpeg F69CD166-79D8-4540-8524-89295AFC19B0.jpeg
Last post
Received my prize oil can holder. It is beautiful, very well made, just like the original. Thanks!
- 18 Replies
- 3007 Views
-
Last post by ThreePedalTapDancer
Fri Apr 09, 2021 12:09 pm
-
-
Early fittings on a late frame issues.
Replies: 14
by
ivaldes1 » Wed Apr 07, 2021 11:00 pm
First post
Hay wagon to Speedster project is a 1926-27 frame with a 1915 theme. Also it's builder has limited knowledge. Questions:
1) Will a Lang's 3640C firewall bracket work ok on a old style wood firewall with a 1926-27 frame without drilling or modifying?
IMG_0202 (1).jpg
2) I assume that the top of a skirt fastens to the Speedster body but with...
Last post
It aint that easy.
1) cutting the notches will allow one to slide a NON STARTER motor forward on the frame AFTER the F/W brackets are removed.
2) The drawing you provide does not accurately show the actual amount of firewall on the inside.
3) The F/W brackets dogleg inward over the top of the inner frame edge. The F/W mounting holes are in line...
- 14 Replies
- 2230 Views
-
Last post by speedytinc
Fri Apr 09, 2021 11:51 am
-
-
Starter Repair
Replies: 3
by
Plankhill » Fri Apr 09, 2021 5:20 am
First post
Has anyone had any luck soldering a loose terminal bolt to the buss bar without removing it form the buss bar to clean it? How have you been repairing them without replacing the assembly.
Last post
Use lead free solder, makes a stronger joint.
- 3 Replies
- 1120 Views
-
Last post by katy
Fri Apr 09, 2021 11:13 am
-
-
Model T/Model A Song 1928
Replies: 9
by
1194668jc » Thu Apr 08, 2021 11:17 am
First post
I'm just a 17 year-old kid who repairs antiques, listens to early jass, and wants a T. All of these attributes made me want to repair an old gramophone, pick up some '10s and '20s jass/jazz records, and fall in love with one of the records, Henry's Made a Lady Out of Lizzie.
Thought you might like it:
Last post
I've always liked this song made popular by Whispering Jack Smith. The Model T isn't mentioned until it pops up at the end of the song as the punch line.
Screen Shot 2021-04-09 at 9.25.45 AM.png
- 9 Replies
- 2204 Views
-
Last post by Steve Jelf
Fri Apr 09, 2021 10:28 am
-
-
Cross shaft the same for all years??
Replies: 8
by
Barry Loucks » Sun Apr 04, 2021 8:57 pm
First post
Are the cross shafts for the shifter/emergency brake the same design for each year of model T, perhaps excluding 09?
Mine has a bit of wear under the pillow blocks. I might try to find a better one.
Barry Loucks
Last post
Don't forget the handle! The early ones are shaped different.
- 8 Replies
- 1903 Views
-
Last post by Original Smith
Fri Apr 09, 2021 10:10 am
-
-
White tyres after Brass era
Replies: 21
by
Been Here Before » Sat Apr 03, 2021 9:32 am
First post
I posted a page showing the 10,000,000 Model T. The posting showed the 1924 touring with what appears to be white tyres.
Researching newspapers of the period ( up to 1925) it would seem that white tyres were available through the United States from many dealers.
My question to the group, any one using white tyres on their post Brass cars? Post...
Last post
Also, the firewall in Steve's picture is a low steel one, so probably a '23. Exhaust pipe is interesting. Dave
- 21 Replies
- 3044 Views
-
Last post by D Stroud
Fri Apr 09, 2021 3:24 am
-
-
Buying my first Model T
Replies: 17
by
bdtutton » Tue Apr 06, 2021 11:53 pm
First post
Hello,
I love old cars and drive my 1930 Model A at least 5000 miles every year. I am planning to buy a 1914 Model T touring, but I am still trying to figure out how much these old cars are worth. The comment I keep hearing is that people are asking more for these cars, but they are getting the same amount of money for them. When I do buy a car I...
Last post
Most of the Michigan clubs remain steadfastly stuck in the last century, but a couple have a phone, email and/or a website.
- 17 Replies
- 2710 Views
-
Last post by Steve Jelf
Thu Apr 08, 2021 5:44 pm
-
-
Then and now-Photo
Replies: 5
by
Herb Iffrig » Wed Apr 07, 2021 3:00 pm
First post
My son's friend's Dad wanted to get some photos of some Fords the other day. This is one of them. T and Mustang.JPG
Last post
The first photo is very nice. Which car would you take if offered? I would take the 1911 over the mustang. You can go to a Ford dealer and order a new mustang, but try to order a 1911 Torpedo. ( I did order a new mustang once, back in 1965)
- 5 Replies
- 1923 Views
-
Last post by ModelT46
Thu Apr 08, 2021 3:57 pm
-
-
- 0 Replies
- 694 Views
-
Last post by ModelT46
Thu Apr 08, 2021 2:53 pm
-
-
Question on spark plug wrench
Replies: 6
by
FATMAN » Wed Apr 07, 2021 12:04 pm
First post
The top photo shoe the spark plug and rim nut wrench for the TT Truck opening is 1 for the 15/16 plug
the bottom is later is it AA Truck or V/8 Truck, opening is 1 1/8
Bob
Last post
Original Model A spark plug is 1&1/16 AF
- 6 Replies
- 1641 Views
-
Last post by katy
Thu Apr 08, 2021 12:39 pm
-
-
touring outside mirror
Replies: 3
by
Emeraude » Wed Apr 07, 2021 12:13 pm
First post
20210331_185645593_iOS.jpg
after installing a top on my touring i wanted a outside mirror on the right side. in contacting the vendors none had the clamp on type for the windshield post. I found through amazon a 5 inch mirror that had a mounting post and was able to make a bracket attaching it to the bolt for adjusting the winshield. The mirror...
Last post
Saw a pair of these mounts a coupla days ago:
- 3 Replies
- 1215 Views
-
Last post by katy
Thu Apr 08, 2021 12:36 pm
-
-
21 inch split rim a bit bowed, how to straighten it?
Replies: 5
by
ivaldes1 » Wed Apr 07, 2021 11:48 pm
First post
This 21 inch rim seems a bit pretzeled but otherwise ok. I've tried straightening it by hand but it still off. Is there an established way of straightening these in this axis?
Last post
It can be straightened with a press & lots of patience & thought.
A customer had a tire shop try to install new tires for him. They pretzelized one & gave up.
I didnt have an extra one to sell the guy. Nothing to loose. Straightening took over an hour to get right.
I started by getting the rim to lay flat, then tweeking it to round.
- 5 Replies
- 1196 Views
-
Last post by speedytinc
Thu Apr 08, 2021 11:41 am
-
-
KRW tool identity and use
Replies: 4
by
Gene_French » Sat Apr 03, 2021 10:30 am
First post
krwat1057.jpg i have several KRW tools that i have dug out of my archives ... some are of known use ... most are spoken for ... i am wondering about tool # AT1057 ... this seems to be a seal driver ? i have included a picture with dimensions ... any help in identifying is appreciated ...always an optimist ...Gene French
Last post
Looks like A310/AA310 in the catalog page. Described ass Propeller Shaft Grease Retainer Placer . Likely the A and AA prefix for for the Model vehicle
Also found this site which has an entire catalogue (also they have for l ater years)
etc
- 4 Replies
- 1605 Views
-
Last post by TRDxB2
Thu Apr 08, 2021 11:04 am
-
-
Howell's Sheet Metal problem
Replies: 24
by
ElGranadaT » Thu Mar 04, 2021 7:57 pm
First post
Greetings all.
I'm new to the group and this is my first post. I retired last March and I'm now restoring a 22 T Touring. (Loving it!) I am hoping one of you might know if Howell's Sheet metal is still in business? I order about $2500.00 worth of parts from them on January 5th 2021. They told me the parts were all in stock and that I would get...
Last post
I’m amazed that this Howell thing gets leg’s every time it happens. There are naysayers, there are ‘oh well’, and there are the ‘they need to up their game’. Nothing wrong with expressing thoughts and opinion…but…pssst...wanna know a secret that really isn't a secret at all?
Howells doesn’t care…simple as that and THAT IS a part of their own...
- 24 Replies
- 4386 Views
-
Last post by George Mills
Thu Apr 08, 2021 10:55 am
-
-
1925 Roadster Pickup Questions
Replies: 110
by
Scott C. » Fri Nov 06, 2020 1:43 am
First post
I recently purchased a 25 Roadster Pickup. Here is a short walk around video of it. The fuel line is pinched flat and not routed correctly. Can someone show me pictures of how the fuel line should be routed? Here is a short walk around video of the pickup. More questions too follow, I am sure.
Last post
I've been keeping track of 1925 Pickups, with Ford beds for years. So far, I'm up to 131, and that doesn't count the ones I don't know about!
- 110 Replies
- 12097 Views
-
Last post by Original Smith
Thu Apr 08, 2021 10:30 am
-
-
Cruise-in's are coming back
by
ironhorse » Thu Apr 08, 2021 8:33 am
A friend of mine owns a Diner (Johnny Angles) in Jacksonville, he contacted me and said he is hosting a cruise-in on the 16th of this month. I told him to save a spot for the model T. 2 days later he said he has gotten such an overwhelming response that he may not have enough parking. It has been a long time and every one is looking to renew old...
- 0 Replies
- 800 Views
-
Last post by ironhorse
Thu Apr 08, 2021 8:33 am
-
-
Actual Board for Running Board End details?
Replies: 16
by
ivaldes1 » Sun Apr 04, 2021 12:15 pm
First post
Hi all, Attached is the goal for Hay wagon to speedster project. It is not what I have right now. ;-) A local carpenter is going to do the running board as a board. It will be multi-color wood clear coated with automotive clear. Should be great. I need some details though. In the picture it looks as though the end of the fender and the wood are...
Last post
Agree. I think I will have to slope the front edge a little for the front fender. I think I am going to do the 3/4 inch thick. I re-measured and the interior of a running board to the edge is 3/4 inch and the wood blocks from Lang's are 3/4 inch. It is only the lip width that is 1 inch.
Ignatio, you don't need any wooden blocks. The blocks go...
- 16 Replies
- 2687 Views
-
Last post by ivaldes1
Wed Apr 07, 2021 10:29 pm
-
-
Reflector doodle
Replies: 1
by
tommyleea » Fri Apr 02, 2021 9:34 am
First post
0331211327 - Edited.jpg
The back of my headlight reflector..Just doodle?
Last post
Here is my other reflector..Not that anybody cares, just odd the things you find on your model T. And, I rotated this picture in all directions possible, but it won't stand upright. Tommy
0406211706.jpg
- 1 Replies
- 904 Views
-
Last post by tommyleea
Wed Apr 07, 2021 10:00 pm
-
-
Interesting 1922 Engine Block, part2
Replies: 3
by
richc » Wed Apr 07, 2021 2:13 pm
First post
Chickasha block left side s.jpg
When I picked up this early 1922 engine block at Chickasha it had a fair amount of dirt adhering to it. Once home a quick cleaning with a drill mounted wire brush revealed a “What do we have here?” blemish. Needless to say the next thing I did was flip the block over to see the damage.
Chickasha block inside s.jpg...
Last post
An interesting example of why the casting dates and all those odd letters and numbers scattered around the block (and heads and other complicated castings). Some designated molds, others designate patterns which are basically a mold to make the mold. Patterns and molds can only be effectively used so many times before they have to be replaced....
- 3 Replies
- 1133 Views
-
Last post by Wayne Sheldon
Wed Apr 07, 2021 3:57 pm
-
-
Side Curtain Drawings for a 26-27 Roadster
Replies: 3
by
DontKnowMuch » Tue Apr 06, 2021 5:52 pm
First post
I am looking for drawings with dimensions for the side curtains for a 26-27 Roadster.
Also, does anyone have pictures of how they modified them to provide more clear viewing area on both sides?
Can someone provide a list of the fasteners and the type used for the windshield and each top iron? Are any of these used for both the top and side...
Last post
Be careful on the drawings! The first drawings say 1925 roadster, but are actually 1926.
- 3 Replies
- 1124 Views
-
Last post by Original Smith
Wed Apr 07, 2021 11:24 am
-
-
Putting a new top on a modelt Fordor
Replies: 6
by
bnchief » Tue Apr 06, 2021 12:13 pm
First post
i am doing a ground up restoration on a 1927 model t fordor sedan All the top wood is replaced. Since i am putting in a new interior the last thing I want is water damage or leaking. I have heard of using 1/8 luan as a base, since they did not use chicken wire i have also been told about using outdoor carpet as an underlayment as well. So i am...
Last post
Alan thank you great answer the cotton is what had me concerned.
- 6 Replies
- 1424 Views
-
Last post by bnchief
Wed Apr 07, 2021 7:15 am
-
-
Radiator rebuild video
Replies: 5
by
Herb Iffrig » Sun Apr 04, 2021 5:47 pm
First post
Looks like he works fast!
Last post
So nice to see real craftsmanship. I now get the understanding of how much work is put into a radiator. Even more interesting since I bought my radiator from Bergs a few years ago. Thanks :)
- 5 Replies
- 1648 Views
-
Last post by Roffe
Wed Apr 07, 2021 4:59 am
-
-
UPS is re-energizing swap meets
Replies: 7
by
R.V.Anderson » Tue Apr 06, 2021 12:31 pm
First post
Last December I got the annual 4-5% price increase notice from UPS. Result:
Carbide tooling inserts in one cardboard box, a 4 cube; weight, 3 ounces; value $125; shipped to western NY from Michigan: $22.00.
If you see something you want or need at a swap meet, better get it there, especially if it's heavy or pricey. The cost of shipping and...
Last post
It costs more to purchase shipping at a FedEx or UPS location.
USPS has an on-line service called click n' ship and many services are slightly discounted using their packaging. BUT you can get sucked into using their Flat Rate Boxes, each box has its own price but is good up to 70 lbs but doubt if you'll do that. These are usually available at...
- 7 Replies
- 2004 Views
-
Last post by TRDxB2
Wed Apr 07, 2021 1:36 am
-
-
Ford sign ?
Replies: 22
by
Dan Hatch » Sun Apr 04, 2021 4:30 am
First post
Anyone ever seen one of these signs. Was just for southeast from what I have found out.
E438864D-4211-4871-B90A-93AC871296B5.jpeg
Last post
Here is link to an old post where I was asking about the sign. Has info on Ford times picture.
I will post picture of mine tomorrow. Thought I had some but can not find them . Dan
Found it.
D1EFC405-1EBB-4905-AAFB-C6378AC33BD5.jpeg
- 22 Replies
- 3897 Views
-
Last post by Dan Hatch
Tue Apr 06, 2021 8:44 pm
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum