MTFCA Forum

In the case of 26-27 T’s with natural wood wheels to be an authentic restoration it would depend if the paticular car you have actually came from the factory that way. Folks have used the natural color wood wheels because they know it was an option those years. Would those cars be authentic just because you could make it look that way? Depends who...

The Tucker was mentioned above. It may have been the original intention, but none of the 50 or so production cars had them made that way. I think I read where a later restoration made one move. Fuzzy though on this.

Everything those Lucius boys do are a work of art, Joe! Lot of talent out your way, must be something in the air. Jonah, send me your address. I’m sure Joe would be glad you get his oil can holder. If he pitches a fit, he can still have the kidney.it’s worn out anyway. Send your address to tmorsher@icloud.com

My daughter;

Thanks Stan
It’s running great until it vibrates lean
Sent you a email and pm with address

T handle! I was on the wrong track as I often am. Sorry. Maybe I should be in the ejection seat :(
I have become obsessed by the toggle switch though.
Thanks for the comments.
Rich

CD2C7BC4-F1BA-4658-A9BA-AB6BC05E8EB0.jpeg 5486C659-0BDF-4CB4-904B-EBE8A2046801.jpeg 3C72F6FB-08DE-4E16-A820-B3ADE646D6D5.jpeg 0073F6B8-5E2C-4FDE-93C7-B10557353CFD.jpeg

Dad was a Telephone guy for 50 years the T is telephone green with yellow pin strip, He liked it that way so paint your car the way it makes you happy. 116.jpg

And, the vital stats are 15 tooth, 5 D.P., 14 1/2degree pressure angle

Contact made. Now we need to get it carted to San Francisco area. That's where the shipper is.

Allan from down under.

Bill, contact Tony Bowker, if he isn't available he most likely knows someone close by there.

I took my T a week go to the school where my daughter teaches so her students could see and touch a Henry Ford car that they were learning about. I always get a real kick out of watching the different expressions when people are looking at the car. It's...

Love mine!

Perry...that's too funny!! Thanks! :lol:

For info on the vintage BMW motorcycle that was at Chickasha, contact Peter Banfield at 719-577-0003. J Burns

I like it but will not purchase one. I don't play golf and I also suspect that getting parts would be a nightmare.
The Chinese manufacturer used the Ford name in the advertisement, but I doubt that Ford can do much unless somebody from the USA buys one. I think that Ford could require that the U S purchaser buy a license. I'm not a lawyer, but I...

By the way, thanks for the link. Wish I knew parts were available. Would have bought the gaskets as that was a little work. I bought some FelPro gasket material which is fairly thick but worked fine. Used a leather punch for the bolt holes.

Wonder if we can post short videos?

5DC9A854-D8ED-4C58-9224-1878DD866CF5.jpeg

FJ

Word from a contact at Greenfield Village is that as of now they're going ahead. Just watch the website for updates.

Thanks Larry. I will remember that when I get to my 14. Dan

14 and 15 radiators will interchange, but are not the same as Keith pointed out. A 15 radiator uses a radiator round tube bent to a slight V for the head light wire. I've also noted on two different 15 radiators, the factory moved the priming wire hole down, and slightly to the left. Why is anyones guess. Sometime in 1914, Ford stopped using the...

Richard,
Yes, that is the very same site where the meet was held 20 years ago. The stadium is just as you remember it. Nothing has changed. The meet has moved locations a couple of times since then, but through the perseverance of Long Beach club members like Jeff Hood, Tom LeRoux, and others, the Long Beach meet is back in......LONG BEACH!

My...

bttttttttt

Before you get started be sure an authenticate some of the versions that currently exist. There are many differences in the old photos of the original and the museum pieces. Seats, side lights, headlights, exhaust etc. Also there are pictures of #1 that could help as well
Previous thread about NO2
no2-000.jpg
no2-colorized.jpg
no2-3.jpg...

The description of the last day was held up with technical problem downloading the pictures from Karen’s equipment. I of course just use my iPhone for everything videos, pictures, web site updates and the occasional phone call. Thanks Karen for you pictures and persistence getting me the pictures, as with no pictures some guys think it never...

Mark, yes it is the axle stand in your posted site. Thank you for the info.

Bryan. Question #1 is NO. You can replace the bulb with a resistor of the proper size and wattage but not a led. The purpose of the bulb is two fold one is to act as a poor boy voltage regulator to limit current flow to the battery and reduce the possibility of over charging.. the other function is a charge indicator to let You know it is charging...

I understand that but the burr needs to knocked down also or it doesn’t have a flat surface for the edge of the small collar on the screw to seat against and seal. I deburred the threaded hole surface and snugged it down and all is fine. The burr was keeping it from seating 100%.

Looks like the castings may have never been buffed and polished except for the face. Take them off the car and give them a good buff and polish job. They may need more than just Rouge and a polish though. Some emery and a sewn wheel might be in order 1st.

Too late. I already installed a 6-12 volt converter. :)

Hi Terry : I have a Canadian '26 Coupe that has never been messed with .It was painted as a used car in 1965 without even removing the rear fenders. It still has the engine pans held on with square nuts and Made in Canada markings everywhere. If I can be of any help, don't hesitate. Cheers : Bruce

Gosh! she looks like a nice girl who would like a ride in a Model T.

Has anyone ever attempted to calculate how much of the total money the Ford Motor Company made up to 1936 actually went to the Ford family?

The question is rather elusive. The profits of the Ford Motor Company where used for expansion of the company, dividends to stock holders (family members had stock). and salaries (family members were...

I just picked up two trailer loads of used parts. Most is 1917 to 1927. What are you in need of ? I will bring it along. Just a month away now !

The MTFCA is hosting its annual swap meet at the Model T museum in Richmond Indiana during Homecoming on June 19. This is for prewar items. Call our office to get a spot reserved. Admission to the museum is free that day and there are free tours on Thursday and Friday. Come join in the fun.

We may not be able to express ourselves as well as Bob but hopefully all of us will be able to share a similar experience this year. A brighter future awaits!

Thank you everyone for your feedback....Besides this forum I have looked at several non-Model T forums and there are a lot of different opinions about what works best for brass and the process of getting it done. I have asked my wife to order small bottles of several different brass cleaners and I am going to do some testing of my own. If I find...

Jack the radius rod up and pull back at same time, it'll go in.

Thanks Steve I will make sure the key fits. You'll see on the other post I think it was my fault the key didn't fit. Ha! I'm learning.

So I called Steve at Lang's (he is always helpful). He said I had the correct size key. He also suggested that I tap the key into the pinion slot. When i tried it before I was just pressing it in with my fingers. I also think you are correct when you say nothing fits perfect. Ha! I should know better (new pinion shaft, New key, and old spider)....

20210406_210020.jpg
In and hooked up! On the dash, I remember reading about a padding that went between the column and the lower bracket. Does anyone use it? I still have the original padding between the dash and the column.
Thanks, Bill

But successful people are breaking that paradigm all the time

You are correct Sir! I will add a 4th part to this....The ability to succeed at doing the three listed & still make damn good money while the others flounder & are happy to break even at the end of the year . Unfortunately in doing this we do have to make some sacrifices in our...

I don’t care what the issue was, is someone going to keep it up now?
Thanks

Why don't you call Tony at (571) 331-0542 or email him tony@cimorelli.com and ask?

I used plywood for the 1919 on my car deck instead of using the wood slats as original. That was over 30 years ago as it was a piece of cabinet grade plywood. I’ll bet Ford would have used a single sheet of plywood if it was cheaper and readily available. Anyway it’s held up well.

Walt Berdan is making good progress on a home made run of replacement rotors, I expect an announcement from him soon. :)

Be sure to get a coil that is for points ignition, not for electronic ignition, as the Amperage of the coil for electronic ignition is too high and will fry the contact breaker points.
As you are using an old distributor i asume your car is still 6Volts, most 6Volt coils are not available for electronic ignitions.
If your car is 12 Volts be sure...

Thanks Stan. I appreciate this very much.
Rich

George. The thought :twisted: did cross my mind that it was a secret process and the anodized label was given to it to throw everyone off. It may still be classified. Jim Patrick

Steve, I have one with a working key and partial ammeter. It needs work but may be worth a look. I’d call it very restorable. Tmorsher@icloud.com to reach me for pics.

Birdhaven is evidently getting a few of those parts back in stock.

They had that small bar wrench recently.

They are keeping a back order list for other parts that are becoming available a few at a time.

One of those popular parts was the Fun Projects Generator Voltage Regulator/Cutout and they recently got a few of those.

Perhaps the most...

Beautiful Tudor! I’m sure you have thought of this, but I will suggest it anyway. The title should have the prior owner(s) name, the date sold/bought and the place of the sale. Even if it is a new title, with only the seller you bought it from, the seller on the title should have records in their files of the estate or person they obtained it from...

Does the 999 exist today?

Kewl!

Does it dump?

: ^ )

Amazingly well, the mechanism is well engineered. Gonna be useful!

Thank you, Steve, Bob

Here is a picture of my mother and her brother with a toy car taken around 1941 or 42.
Mom&Mel&toycar.jpg

Vehicle transport is the same.

It’s just a larger package in the mail
so to speak.

Folks don’t realize that logistics dictate a full trailer goes down the road containing cargo that gets closer to the destination.

It makes sense from a shipping standpoint 🤔

FJ

I sold more Model T parts at Luray in one day than I sold in Hershey in 4 days !!!
Great swap meet!!!!!!!!!!!

Pat,

It says The Swan Carburetor Co Cleveland Ohio USA . It is greasy sawdust. The gentleman who had passed was a wood worker. Buzz saws and other belt driven stuff.

20210410_220014556_iOS.jpg

Getting closer , call Dave and get your spots while they still have some, Bob

That’s a neat little car Jeff. Did the original builder build any more or just the one car? Would be interested in hearing more about it. Is it a complete car? What is the track and wheelbase ? I am restoring my 13 Zip cyclecar and another old car friend is in town is restoring his ‘14 Scripps Booth.
Todd

Todd, I went back to this thread and...

Thanks Bill....this came about because I let the historical society auction off Model T rides for two couples which netted the museum over $300. I took the Model T over to talk ride logistics with the administrator and they were blown away to put it mildly. They loved the car, loved the history and would like me to participate in a number of their...

Suzanne, the other side of the tracks is where the low income people live.

Do you call the Interstate the highway, the freeway, or the expressway? We use all three terms here.

The Freeway has on and off ramps, the Highway has streets that intersect with it (not ramps), and the expressway has fewer streets intersecting (with stoplights).

And...

The majority of these are original branded SCANDINAVIA & I always check them for smell as in musty - I don't buy those - these in my stock are all prefect to run. I've collected them for many years.

I do have a few sets from the seventies & eighties (way before tar babies ) when they were still the same weave BUT THEN, someone had the bright idea...

I think that is your best batch of shots yet. The variety is fantastic. Thank you.

There's no guarantee that a wall present in 1925 is still there, and cemetery is just a guess, but if somebody wants to look up the street views for cemeteries around Highland Park, go for it. I have other things to do. :D

Screen Shot 2021-04-09 at 12.41.11 PM.png

are you planning on putting a top access cover where the battery goes? My speedster doesn't have one(I didn't build car), so the battery is a pain to get to from underneath.

Tim

Received my prize oil can holder. It is beautiful, very well made, just like the original. Thanks!

It aint that easy.

1) cutting the notches will allow one to slide a NON STARTER motor forward on the frame AFTER the F/W brackets are removed.
2) The drawing you provide does not accurately show the actual amount of firewall on the inside.
3) The F/W brackets dogleg inward over the top of the inner frame edge. The F/W mounting holes are in line...

Use lead free solder, makes a stronger joint.

I've always liked this song made popular by Whispering Jack Smith. The Model T isn't mentioned until it pops up at the end of the song as the punch line.

Screen Shot 2021-04-09 at 9.25.45 AM.png

Don't forget the handle! The early ones are shaped different.

Also, the firewall in Steve's picture is a low steel one, so probably a '23. Exhaust pipe is interesting. Dave

Most of the Michigan clubs remain steadfastly stuck in the last century, but a couple have a phone, email and/or a website.

The first photo is very nice. Which car would you take if offered? I would take the 1911 over the mustang. You can go to a Ford dealer and order a new mustang, but try to order a 1911 Torpedo. ( I did order a new mustang once, back in 1965)