MTFCA Forum

Ed Larson teaches me how to shift his very early T at the MTFCA Winter Clinic in McPherson College, KS. Click on the FB link to see the video:

IMG_3234.jpeg

Thank you Bill C. and Bill A. for this very nice photo of a 1905 side entrance Model C with lots of extras. C 3.tiff

In color:

IMG_2899.jpeg

Hello all during rebuild of the gearbox i discovered the gear casing is cracked at the pin of the triple gear, does someone tried to repair this or does someone has one used for sale and eventually also a set of triple gears

On frozen Lake St. Clair 121 years ago Henry Ford destroyed the world one mile record. He became the first American driving an American made machine to hold the record.

I’ve been making new transmission drums for a little while. I’ve made a sample main shaft and now i’m considering making gear sets for the transmissions. I started by making one triple gear to see if I could do it. I think I’m going to try to make a full set and have them heat treated.

I recently started working on the engine of my model s. The main bearings have to much play. In the manual i did see the babbitt bearing is a loose bearings is that the case? Can i just press a another bearing in de block? IMG-20251223-WA0010.jpeg

A friend shared this photo of a 1906 Ford Model K. Ford Motor Co. sold just over 300 1906 Model K, listing for $2,500. Another 6 - 10 were sold through Ford of Canada.

IMG_2784.jpeg

While a small number by today’s standards, this number made Ford the largest six cylinder producer in the world. The Model K, like Ford’s other 1906 offering, the...

I’m often surprised at the information gleaned from old letters, documents and newspapers. Then, when info is corroborated from two or more sources, it’s quite rewarding (resolution #1 for 2026, “get a life….” :roll: )

While searching for a 1907 Ford sales commission contract, I came across this contract between a Model N purchaser, Arthur W....

I need a water pump impeller for an early 1909 model T. Per #2500. kdmks AT att.net. Thanks

I am looking for a copy of a 1907 Ford Motor Company - Agent contract. This would be for the 1907 fiscal year, so may be written and/or signed around October 1906 into 1907. I have a Ford Branch Manager contract, however the dealer/agent contract will be different.
Thank you for any help with this needle that must be in some haystack.
Happy...

Everything in context: Two racing events at Sheepshead Bay Track (Brooklyn) in 1907, the Suburban Handicap and Futurity Stakes (at one point the highest dollar race in the U.S.) provided a snapshot of the cars the rich and famous drove.

At Both races, held in June and on Labor Day 1907, newspaper reporters recorded the number and make of the...

One question I’m frequently asked when “defending” the reputation of the Ford Model K; “if it was a good car why the bad reputation?”

Just as it’s difficult to prove something didn’t happen, it’s difficult to provide evidence when there was no crime (leaning on my former profession).

I’ve read biographies and historical collections about Ford...

On this day before the night before Christmas, I thought this a touching clip. Clara Ford wrote this letter just before Christmas to a close friend. She wrote of the loss of her husband of many years, Henry Ford. For anyone watching, I hope it brings a tear, a smile, and a sense of Christmas past. Merry Christmas

Click below to see the video at...

…., they had that capability then?

IMG_8390.jpeg

IMG_8392.jpeg

IMG_8393.jpeg

Ecclesiastes 1:9,
What has been will be again, what has been done will be done again.” There is nothing new under the sun.
Merry Christmas

New CNC steel rear tapered or straight hubs. For NRS
$500 us a pair.

was finishing design work on two wildly innovative new models, K and N. Both would be priced well below competitors in their class. Model K, based on Henry Fords six cylinder racer boasted one of this countries first six cylinder production motors. At 40-50 hp, the new model was priced well below other new for 1906 six cylinder domestic cars,...

Set of 4 used Firestone non skid 28x3 tires. Still pretty flexible. $400 plus shipping. Kdmks AT att.net.

I am in need of a set of 3 1905 Ford model C triple gears (or a model A 10 hp). Hoping someone has a spare set or can tell me where I can get them made. Merry Christmas EFR !!

Regards,
David Tagert

As Henry Ford and Ford Motor Co. dealt with the fallout from A. Y. Malcomson’s creation of a competing concern, Ford was demonstrating his multi-tasking abilities. Revolutionary models K and N were still experiencing design changes. Ford Manufacturing Co., created to build the forecast 10,000 Model N motors, was not yet incorporated (Henry Ford...

December 16, 1905; eleven days after the Ford Motor Co. (FMC) Board of Directors (BOD) sent an official letter demanding A.Y. Malcomson resign his position of director and treasurer of FMC.

Below is the letter (with transcription) Malcomson wrote to the BOD, received 120 years ago today:

IMG_2181.jpeg

IMG_2086.jpeg

IMG_2087.jpeg

This...

Click on the link to see Juha’s FB post:

Thank you Juha.

Castings for the dash rail on 1903-04 Ford. $400 pr.
Rear door sill plate for 1903-04 Ford tonneau. $200. IMG_4558.jpeg

IMG_4600.jpeg
Dash rail also fits 1903 Cadillac.
IMG_4607.jpeg

120 years ago today the Ford Motor Company held an emergency board meeting. The reason? To compose a letter demanding treasurer and board director A. Y. Malcomson resign. He secretly put together a competing company, Aerocar, and the Detroit newspapers had just reported on the company and Malcomson’s role as President and majority owner of the new...

1905-06 Ford model F runabout body. Never used. Very nice craftsmanship. Wood body with grey primer. $2800. Text or leave message at too six ooh five 7 one three six 5 seven. Pickup only.
IMG_2267.jpeg

Need 1 buckle for an SR mother in law seat. Have straps etc just missing one of the buckles that mount on the back of the body

Jim IMG_0548.JPG

For years I’ve been curious, why did Henry Ford and his designers develop the Model K with individual jugs, when the Model N motor was cast in pairs? It seems that pairs were the natural wave of the future, leading toward the future Model T mono-block.

Then I read this May 1906 “Horseless Age” article.

IMG_7584.jpeg

The article mistakenly...

Running boards, but it looks like a rear entrance tonneau. I think the shift lever is evident next to the driver?

IMG_1780.jpeg

Enhanced:
IMG_1783.jpeg

From this FB post:

On November 30, 1905, “_ _ IT HIT THE FAN.”

As the transcribed article below shows, this was the first the press learned that Ford Motor Co. co-founder (along with Henry Ford) Alexander Y. Malcomson was starting a new, competing automobile company. To add insult to injury, Malcomson had just been approved by the other directors on October 16th to...

I am looking for a correct splitdorf coil box for my 1906 Ford model N. I am currently running an early T box but would like to replace it with the correct box. I did talk to someone at Hershey at the early Ford meeting who said he probably had one at home, but I do not recall his name.

I know Ford bought ignition components from Schug, Splitdorf and Huff during 1903-04, There may be others. Please add any information and pictures. Thanks

Just thought I would give it a try! I am looking to buy an NRS top and/or buggy rail. Maybe you have one and have decided not to use it. Any condition is acceptable.

Respectfully,
David Tagert
850-585-6732

I am missing the portion of the hood former on my SR that goes from the steering column across the top of hood then down the left side. I do have the small piece that goes from the steering column vertically down the right side. I haven't been able to find one so my question is if I fabricate one is the hood dimensionally the same on both ends so...

These were used on 1903-04 and maybe later? Ford cars. Also I think early Cadillac used the same latch. All brass. $185.00 plus $10.00 US shipping. kdmks AT att.net.

Here are some actual early photos from my collection. Feel free to screen grab 🙂
IMG_2144.jpeg IMG_2146.jpeg IMG_2147.jpeg

There are no historical references to early November 1905 in Ford history, but 120 years ago, the future of Ford Motor Co. was about to change forever. And Henry Ford, CFO James Cousins, C. H. Wills nor any other Ford Motor Company figures were involved.

Ford Motor Co. had just finished an incredibly successful fiscal year (Oct 1, 1904-Sep 30,...

Along the lines of the similar topic in the T area of the forum, share what you've done with your A,B,C,F,K,N,R,S,SR Ford this year. Personally, I have done nothing, :( , so let's depend on you all to contribute!

Thanks!!

These guys are in Australia. They restore World War II tanks that have been used as targets over the years. They get them running again. This is one example of what they go through to make a part.

Still on the lookout for a 2 Cylinder Ford project if you know of anything? Unrestored or an old, tired restoration etc.

Please send me a private message if you can help, or with any leads.

Thanks 🙏

I'm putting new bands on my Model S. Should they be soaked in oil prior to install. Could not find anything about this in the Ford supplied owner's info.

Thanks Jim

Please help! I am looking for a Ford Model NRS intake manifold. If you have an extra one I would like to buy it. The one on my N is a model T intake manifold that has been modified by cutting off the goose neck and welding it back on 180 degrees out (right hand drive versus left hand drive). I would really appreciate your help if you have an extra...

This letter (courtesy of Benson Library, The Henry Ford, all rights apply), sent to Henry Ford by his new partner, Alexander Y. Malcomson, dated October 30, 1902. The two men had recently formed a partnership to produce automobiles based on Henry Fords design.

The letter references two other men who will also shape Ford history for years to...

Horace Rackham, one of A.Y. Malcomson’s attorneys along with partner John Anderson were two of the original investors in FMC. In this 1923 interview Rackham talks about his investment, Henry Ford and other details about his involvement with the company form its start.

Does anyone here know anything about the 2 lever T up for auction at the end of the month by Mecrum. Engine number stamped 22? Nice pictures and all the right bits for a 2 lever waterpump T. Is this one the real deal? It will be interesting to see what it makes.

120 years ago today (Wednesday, October 18th, 1905), newspapers around the country (U.S.) ran the story No Dewar Cup Race.

IMG_0796.jpeg

The trophy, donated by Sir Thomas Dewar of England, was awarded to the winner of the fastest competition mile in the United States. The rules stipulated that the trophy could be competed for twice a year,...

Richard B. Darling , EFR Nr 9, Life Member, passed away in October 2025. Richard was a most generous member. He donated a defibrillator in the name of the EFR to the New London Fire Department. He served many years as a Director on the New London to New Brighton Run. More details will be coming.

Torpedo wedding day.png

From Tom Rootlieb .

Will there be an EFR meeting at Hershey this year?
If so when and where?

Thank you.

Does anyone have a picture of where/how the muffler on a 08 SR attaches to the chassis? I have the tail pipe and muffler, and the muffler has a bracket that ia bolted on, with a bolt hole, but don't see that the hole lines up with anything on the chassis. Is there another piece to the bracket?

thanks Jim

I'm looking for a 1909 Coil box. I'm going to Hershey. Contact Eric. 815 535 1367

Now that I’m making the transmission drums for the Ford NRS. I thought I would try my hand at a main shaft.

Pretty nice original. $1000.00 plus shipping. kdmks AT att.net.

At Old Car Festival a few weeks ago, someone mentioned that Ford significantly lowered production of the six cylinder Model K in 1908. As a matter of fact, Ford did drop the number of K sold in 1908 (as they also did with Model N). The K and N were 3 year models, 1906-1908. In 1906 Ford’s internal audit showed 301 K sold in 1906, 357 in 1907 and...

From Tom Rootlieb NRS Ford 3.png

Using audit information, i broke down the net profit by model. Model B generated more net profit than the C and F combined for fiscal year 1905 (Oct 1, 1904 - Sep 30, 1905):

B2F6B4D8-0FEF-4246-8CCD-EA8D7A46C524.jpeg

This is what I have currently for production numbers and profit by year, taken from Ford Motor Co. Profit & Loss (audit) records. 1909 profit/loss by model were no longer documented, and I used 1908 net profit numbers (probably not correct).
Cheers,
Rob

70F47A47-FB79-4DBD-8346-FF73B1E4DDDE.jpeg

Hi! I am looking for hinges and locks as shown in the picture for my model A 1904. I am also interested in a gas tank. I will be at Hershey this year if anyone has these.
Kind regards,
Jonny Eriksson

Ford Motor Co. was an immediate success financially. Within months of their first sale, the company issued stock dividends to investors. In many cases, the dividend actually paid a portion of some investors commitment (agree to stock purchase), as several had not paid actual cash, or their full commitment, but issued notes (loans) to pay in...

Several years ago the EFR commissioned new floor mats (original design) for NRS Fords. They were not cheap but GREAT quality and very authentic. I am hoping someone with an extra will consider selling it to be put in service in a restored car. Or perhaps we can start a list to make another run of new NRS floormats. Please email me thru the forum....

Early Fords made a great showing on the run. We had 2 1904 model A, 3 model F, 1 K roadster, 1 model N, 2 model R, 1 model S runabout and one model S Roadster. All but 1 model F finished. The F had a coil box malfunction.

Hello all,

After restoring several model t and a fords is started a new challenge with this early project ford. See picture.

Best regards Gerard from the Netherlands

20250811_101424.jpg

Attached are excerpts from the Ford Motor Co. (FMC) Board of Directors (BOD) minutes between April 2, 1904 and May 16, 1905. We see in April 1904, while less than one year since incorporation (June 1903), FMC is taking bids for wheels on their next model (Model B was addressed in earlier meetings).

IMG_8057.jpeg

At the August 22, 1904 meeting,...

Very nice original unrestored carb. Contact me thru the MTFCA messaging system email.

Ottumwa automobile co.png Akron Ind.png

It is funny they both have a NRS Ford peeking out of the door.

babbitta.jpg

I sent an email to one of the Officers (Don't remember which one) wondering who i s the ninth Board member. No response. Now I'll ask all of you, is there one? If I hear from no one, Ill have to go back to my old records and check it out. TIA

Or what would it take to use Model T parts to make a chain drive car?

Thank you.

I used to enjoy the old members photos section. I can't find it since the changeover.

I have an early spring that is 4 inches narrower than a T.
Is this possibly a N R S spring?
Thanks

It’s not Peoria, but an interesting array of automobiles in Decatur Illinois, July, 1905. 66 cars were reported in this newspaper article. Ford Motor Co., just completing their 2nd year of operation, is the fourth largest in number of cars in Decatur.

IMG_8811.jpeg

IMG_8810.jpeg

Posting here in hopes of getting some help. My wife is in love with the model k. She saw one when she was a kid and I’m hoping someone here has one close to New England and would be will for us to come look at it and even possibly get a ride for her we have a couple of model t’s if you can and are willing to help do this please reach out via text...

120 years ago today Charles Miller and Bro. of Washington D.C. placed the following advertisement, “A Car of Model B ….. Just Received.”

IMG_6268.jpeg

A quick check of the Miller Accounts Receivable ledger (compliments of The Henry Ford Museum, all rights apply) reveal several items.

IMG_6269.jpeg

Closeup:
IMG_6270.jpeg

First, we see...

This is the earliest announcement-article I’ve seen of the impending Model N. While many things are incorrect (wheelbase, opposed cylinders, $400 price, etc.), many are spot on (cylinders cast in pairs, horsepower per pair-8, etc.).

IMG_8724.jpeg

It is with great sadness that I report that Geoff King, EFR Member and Newsletter Editor passed away on Wednesday 19th March with his family around him.

Geoff was a friend to many of us and was a popular member of the EFR. The quality of his newsletters and his friendly, helpful manner will be sorely missed.

His daughter Emma is a Director of...

120 years ago today:
July 3rd, 1905, the city of Port Huron Michigan, just north of Detroit, announced Fourth of July boat and automobile races in local newspapers.
Charles Grant, Ford Motor Co. Detroit Branch Manager was listed as the driver of a Ford four cylinder racer. As events unfolded, Henry Ford would drive the Ford in the city’s first...

I am looking for a tail light for a NRS restored car. Ideally a Dietz Dainty to match the sidelights on this car. Please set me know by private message or call me if you know me. Thanks! Mike

Screen shots from the FB link:

Continuing with key events in Ford Motor Co. history from 1905:

This is the first public comment/article I've seen regarding the upcoming Model N. The new model is reported to be priced at $400 (came in at $500). While the two horizontal double opposed cylinders rated at 8 horsepower, was off, there are many tidbits here that do make it to the...

118 years ago tonight, at 10 pm, Frank Kulick set off in a Ford Six (Model K) on a 24 hour race. He and Ford were not the headliners or favorites. In 24 hours they would turn the motor racing world upside down.

IMG_8358.jpeg

IMG_8357.jpeg

118 years ago tonight, June 22, 1907, Ford race car drivers Frank Kulick and L. B. Lorimer completed a grueling 24 hour race, begun the night before at 10 pm. They drove a Ford Six (Model K, like the one seen on my FB page) to a world record victory.
By 1907, the 24 hour race, held at various one mile dirt tracks around the country, had become...

Ford Motor Co., and Henry Ford experienced many strategic events during the first years of the company’s existence. 1903 saw company formation. 1904 saw continued growth, still selling the venerable Model A. 1905, arguably saw unparalleled growth, with the advent of three models, the first four cylinder model, and two 100% dividends paid to...

Complete NRS Heinze coil box. I have not tested the coils, Real nice condition. Lid is new, the box probably should be re wired. $750.00. Kdmks AT att.net. Plus shipping.

Hello all.
This is my first post, and marks a return to the hobby after 50 years. Looking for a small, relatively straightforward restoration project, I bought Model S #1454 from Kim Dobbins. The car appears entirely original, very complete, and free of rust or rot, kept safe, dry, and unbutchered for 117 years! It is exactly as represented....

I’m continually amazed by the speed Ford Motor Co. established a dealer network, parts/components supply and delivery network. This thread helps demonstrate how quickly Ford was able to supply cars, and deliver them to a new owner. The thread also demonstrates how period news sources dovetail with existing Ford Motor Co. documents to paint a...

I’m looking for the weight of both the 16 inch (primarily 10 hp A) and 20 inch (8 hp) flywheel. If anyone has a n A motor apart I would appreciate the weight and measurement of the flywheel. If the crank is still attached, the weight of both is good too.

The Model C flywheel should be the same as the 10 hp A, but if anyone has the “C” flywheel by...

Many Model T owners might be surprised to learn that Ford Motor Co. had already dove headfirst into vanadium steel production by the summer of 1907. For anyone seeking in depth study of vanadium at that time, a few links:

This recap appeared in the ALAM magazine (Selden Patent opponents).

Paul B. Hanks was a successful young entrepreneur at the turn of the last century. He owned an insurance agency, as well as oil and coal interests. Born in 1873, he was ten years younger than Henry Ford. His photo was included in this 1906 article, regarding oil interests in Indian Territory (soon to be the state of Oklahoma):

IMG_6950.jpeg

As...

I have 3 gear drums, one has 3 cracks through the pin holes, $175.00. one has a weld repair in the face, $300.00. one is a brand new Floyd J reproduction, $1100.00. One brake drum with a bad gear, $175. One reverse drum, $250. All plus shipping. Kdmks AT att.net.

Two Paducah Kentucky businessmen owned Ford Model K touring cars. One Sunday, they were busted…

IMG_6915.jpeg

IMG_6918.jpeg

Ford Motor Company began describing their projected 1908 lineup in late 1907. Sales ledgers indicate at least 3 Model T were sold in late 1907 and early 1908. This advertisement appeared in the New York Sun newspaper in November 1907.
IMG_6210.jpeg

I need to replace the hand crank on my 1906 Ford model N. None are available thru the suppliers. Hoping some one has an extra hand crank for an NRS they would be willing to sell. Thanks MTFCA !

Ford’s Model K, in addition to being the number one six cylinder car in production numbers in the world for both 1906 and 1907, had other unique features. One was a magneto invented by Ed Huff (who later invented the Model T low tension magneto).
Huff studied Nikola Tesla’s patented theory and invented the world’s first working CDI, or...

My 1905 (model year) B was produced at the end of 1904, and just recently approved for the London to Brighton run. I plan to make the run this fall. It’s one of only 2 Model B surviving that are eligible, and the first Ford Model B approved.
However, it’s not the first Model B to prowl the streets of London. In 1905 at least 15 Model B were...

About 25% of early Ford sales information survived in the Accounts Receivable ledger books at The Henry Ford, Benson Library. Trent Boggess tirelessly entered the data by hand (thousands of records) into a database included with Carl Pate’s (RIP) Early Ford book.

However, reviewing the actual ledger pages and entries provide additional...

This is a very nice Kingston Coil Box with key and coils for a two cylinder car. Should be a nice addition to any two cylinder Ford, Maxwell, or other. $600.00 plus shipping.

Contact Info
Jonathan Bodine
jethro10101@AOL.com
1-406-498-3946

I am looking for a NRS engine oil drain. It is a pepcock with a standpipe attached. Please contact me if you have an extra one - the engine has a pipe plug in the drain hole! I will buy two if I can find them. Thanks MTFCA !

Ford Motor Co. began selling cars in July 1903. The company experienced immediate success, and sold almost 200 cars by the start of their first full fiscal year, beginning October 1, 1903. The Electric Vehicle Co. wasted little time initiating a law suit. This author indicates the suit is expected to last for years. He was right.

IMG_6244.jpeg...

Illusionist and escape artist Harry Houdini purchased a Ford Model K touring car in 1907 for the purpose of transporting it to Europe for use while performing. IMG_6145.jpeg

The world famous Thomas Flyer made it to Oakland in March 1908, escorted in by a parade of motorists. At least one Ford was in the mix.