Classifieds - Parts - MTFCA Forum

Classifieds - Parts

New Topic

10430 topics

Page 1 of 105
- Jump to page:
1
2
3
4
5
…
105
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

83965 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Avoid scammers. Don't post personal info!

Last post by drzomber « Sat Jan 10, 2026 4:31 pm
Replies: 12
by AdminJeff » Wed Sep 18, 2024 8:20 pm

First post

To Avoid scammers, Don't post personal info! This includes your email address, & phone number.
Do so at your own risk.
It's better to communicate through the forum system.

AdminJeff

Last post

ModelTKeith, keithbrouhard@gmail.com

Same! He's apparently making the rounds.

12 Replies

15368 Views

Last post by drzomber
Sat Jan 10, 2026 4:31 pm
Connecting Rod clamp bolts FS

Last post by Dan Hatch « Sun Jan 18, 2026 2:57 pm
Replies: 2
by Dan Hatch » Fri Jan 16, 2026 7:01 pm

First post

Here are some used sets of connecting rod bolts. Set of four $10 + shipping. Have several sets. See pictures. Email me by forum. Thanks Dan
IMG_5276.jpeg

Last post

Back to the top

2 Replies

175 Views

Last post by Dan Hatch
Sun Jan 18, 2026 2:57 pm
WTB: Fork Mounted Electric Headlights

Last post by Karl Von Neumann « Sun Jan 18, 2026 2:31 pm
Replies: 5
by BRENT in 10-uh-C » Sun Jan 18, 2026 8:45 am

First post

Looking to purchase a pair of the Fork-mounted Electric Headlights. Restored or Unrestored, any condition considered as long as the lamps are complete and restorable.

Below are examples of what I am looking for;

Thanks!!

Last post

I have a pair of electric corcoran lamps i will go see if they will fit the T forks

5 Replies

100 Views

Last post by Karl Von Neumann
Sun Jan 18, 2026 2:31 pm
Model T Boat Motor

Last post by jawa « Sun Jan 18, 2026 1:58 pm

by jawa » Sun Jan 18, 2026 1:58 pm

Turns over freely. Have not even tried to start. I picked up with plans to clean it up and get it running but I don't have the time. Cool piece. I can send more pictures if you contact me. $850 picked up in central New York.

0 Replies

47 Views

Last post by jawa
Sun Jan 18, 2026 1:58 pm
Model T Parts

Last post by 1926TTExpress « Sun Jan 18, 2026 1:35 pm

by 1926TTExpress » Sun Jan 18, 2026 1:35 pm

The following parts were removed from a 1926 Model T Coupe. I am not familiar enough to know if some are correct / or if they fit other years. *The rod from the firewall to the radiator...$10. *Radiator shield trim strip...$5. *Horn bracket from the headlight cross bar...$25. **Sorry, but I can't figure out how to upload pictures. Email me at...

0 Replies

54 Views

Last post by 1926TTExpress
Sun Jan 18, 2026 1:35 pm
Model TT Parts

Last post by 1926TTExpress « Sun Jan 18, 2026 1:23 pm

by 1926TTExpress » Sun Jan 18, 2026 1:23 pm

The window garnish are from an enclosed steel cab truck. One(1) piece is from the right door, but with some work could be modified to fit the left door. The other two(2) will fit either door...$45. The running boards and braces may fit any TT chassis...$80. **Sorry, but I can't figure out how to upload pictures. Email me at deszs759@gmail.com...

0 Replies

37 Views

Last post by 1926TTExpress
Sun Jan 18, 2026 1:23 pm
Model TT Parts

Last post by 1926TTExpress « Sun Jan 18, 2026 1:21 pm

by 1926TTExpress » Sun Jan 18, 2026 1:21 pm

The window garnish are from an enclosed steel cab truck. One(1) piece is from the right door, but with some work could be modified to fit the left door...$45. The running boards and braces may fit any TT chassis...$80. **Sorry, but I can't figure out how to upload pictures. Email me at deszs759@gmail.com Parts are in Byron, GA.

0 Replies

26 Views

Last post by 1926TTExpress
Sun Jan 18, 2026 1:21 pm
WTB Black and Brass cowl lamps

Last post by Larry Debaugh « Sun Jan 18, 2026 1:08 pm
Replies: 1
by mklooksup » Sun Jan 18, 2026 12:00 pm

First post

I'm looking for a pair of 1913 1914 black and brass cowl lamps. Please give them up :)

Manny Kourounis

Last post

Hi, sent you an email, I have several sets Victor, E&J, brown and others $$250 a set Larry Debaugh

1 Replies

49 Views

Last post by Larry Debaugh
Sun Jan 18, 2026 1:08 pm
1926-7 Hood and Misc. Parts

Last post by 1926TTExpress « Sun Jan 18, 2026 1:08 pm

by 1926TTExpress » Sun Jan 18, 2026 1:08 pm

*The hood fits 1926-27 Model T cars. It is an original part. It was disassembled, sandblasted, cracks welded, straightened, epoxy primed, and reassembled. It will need very little work to put on a car...$300. *The fender fits 1926-27 Model T cars. It is an original right front. It is repairable...$40. *The headlights(2) and reflectors(3) may be...

0 Replies

36 Views

Last post by 1926TTExpress
Sun Jan 18, 2026 1:08 pm
FS ECCT - Brand New!

Last post by MKossor « Sun Jan 18, 2026 12:57 pm
Replies: 6
by MKossor » Sat Apr 26, 2025 1:02 pm

First post

Its that wonderful time of the year again!
Time to test and tune Model T coils for the Summer Touring season.

Learning the art of coil tuning is fun and easy to do with the right tools and videos.
Taking an active roll in how well your Model T runs also adds a very satisfying component to the Model T driving experience.

ECCT - Complete Test...

Last post

With snow on the ground its the perfect time to learn the art of coil tuning and play an active roll in how well your engine runs this touring season.

Check out the MTFCA Coil Testing and Tuning Webinar on Youtube:

Its a great review of the Model T ignition system, Model T coils; how they work and how to properly tune Model T Coils.
Great...

6 Replies

1613 Views

Last post by MKossor
Sun Jan 18, 2026 12:57 pm
Timer - Maintenance Free

Last post by MKossor « Sun Jan 18, 2026 12:42 pm

by MKossor » Sun Jan 18, 2026 12:42 pm

Tired of messy timer maintenance every 500 Miles? The Surging, jerking, skipping, missing.... Try an Ideal Timer (I-Timer). It's a direct drop in replacement for the stock Model T timber yet completely maintenance Free.

Start on battery and run on Magneto OR battery, the I-Timer is immune to timing cover misalignment and provides reliable coil...

0 Replies

47 Views

Last post by MKossor
Sun Jan 18, 2026 12:42 pm
Duncan,Ok. swapmeet wanted to buy

Last post by Gene_French « Sun Jan 18, 2026 12:29 pm

by Gene_French » Sun Jan 18, 2026 12:29 pm

i am starting this post in possibly the wrong section BUT ... the Duncan,Ok. swapmeet is coming up in March and i am attending to sell as well as purchase some parts for my projects ... i am WANTING TO BUY ...a windshield frame for a 1931 Murry body model A 4dr., Masonic items from the 1900-1930 era , and 4 cyl. Dodge Brothers items ,particularly...

0 Replies

40 Views

Last post by Gene_French
Sun Jan 18, 2026 12:29 pm
Complete Distributor Conversion

Last post by MKossor « Sun Jan 18, 2026 12:27 pm

by MKossor » Sun Jan 18, 2026 12:27 pm

Complete Distributor Conversion is a lot of work to install timing cover and coil, still requires periodic maintenance and periodic replacement of points and cap. The E-Timer, on the other hand, is a simple drop in alternative that also features automatic timing advance but is completely maintenance free, non-contact and never wares out for about...

0 Replies

53 Views

Last post by MKossor
Sun Jan 18, 2026 12:27 pm
Kingston 4-ball carburetor

Last post by Corey Walker « Sun Jan 18, 2026 10:16 am
Replies: 3
by Corey Walker » Wed Jan 07, 2026 2:42 pm

First post

Completely disassembled and cleaned, viton tipped needle and seat conversion, little to no wear on throttle shaft with bushings installed top and bottom, new choke spring, reconditioned spray needle, test run. $450 postpaid to continental USA email: wlkma9@gmail.com

Last post

Back to top.

3 Replies

278 Views

Last post by Corey Walker
Sun Jan 18, 2026 10:16 am
TW Timer brush order

Last post by love2T's « Sun Jan 18, 2026 9:50 am
Replies: 3
by love2T's » Sat Jan 17, 2026 9:04 am

First post

Hey all TW Timer lovers...by request I've been asked about any new runs for the TW timer. I hadn't planned to til 2027 but I reckon maybe I better. So I will take EMAIL THROUGH THE FORUM requests until Feb. 15, I strongly suggest you PLAN YEARS AHEAD.

Price from 2025 started at $19 ea. for rectangular brush, $27 for the round. You'd think it...

Last post

Keepin this to the top for those who are late readers!

3 Replies

258 Views

Last post by love2T's
Sun Jan 18, 2026 9:50 am
Dykes Automobile Encyclopedia

Last post by BE_ZERO_BE « Sat Jan 17, 2026 7:50 pm
Replies: 1
by BE_ZERO_BE » Sat Jan 17, 2026 5:32 pm

First post

Dykes Automobile Encyclopedias

Twelfth Edition
Fourteenth Edition
Nineteenth Edition

All three editions for $30

Plus shipping USPS Ground Advantage

IMG_0028.JPG

IMG_0029.JPG

Last post

Sold .............. To Ed

1 Replies

170 Views

Last post by BE_ZERO_BE
Sat Jan 17, 2026 7:50 pm
Model T Books

Last post by BE_ZERO_BE « Sat Jan 17, 2026 7:49 pm
Replies: 2
by BE_ZERO_BE » Sat Jan 17, 2026 5:36 pm

First post

Model T Ford Car
Model T Ford Owner
Model T Ford Service Bulletins Essentials

All three books for $30

Plus Shipping USPS Ground advantage

IMG_0030.JPG

Last post

Sold to Mike.
..

2 Replies

189 Views

Last post by BE_ZERO_BE
Sat Jan 17, 2026 7:49 pm
NOS 5 to 1 Steering sun gears FS

Last post by Dan Hatch « Sat Jan 17, 2026 4:51 pm
Replies: 3
by Dan Hatch » Fri Jan 16, 2026 7:17 pm

First post

Have some NOS 5 to 1 Steering pinions sun gears. T-3519B. $35 for a set + shipping. See pictures. Email me by forum. Thanks Dan.
IMG_5279.jpeg
IMG_5280.jpeg

Last post

Sold a couple sets. Have many more.

3 Replies

352 Views

Last post by Dan Hatch
Sat Jan 17, 2026 4:51 pm
NOS 4 to 1 Steering Pinions FS

Last post by Dan Hatch « Sat Jan 17, 2026 4:50 pm
Replies: 2
by Dan Hatch » Fri Jan 16, 2026 7:12 pm

First post

Here are a couple NOS 4 to 1 Steering pinions. Came out of Ford dealership in the 1960’s. See pictures. $35 each + shipping. Email me by forum. Thanks Dan
IMG_5285.jpeg
IMG_5286.jpeg

Last post

Sold pending payment

2 Replies

211 Views

Last post by Dan Hatch
Sat Jan 17, 2026 4:50 pm
NOS Steering Gears FS

Last post by Dan Hatch « Sat Jan 17, 2026 4:49 pm
Replies: 4
by Dan Hatch » Fri Jan 16, 2026 7:05 pm

First post

Set of steering gear sets. 5 to 1 set. Pinion gear and 3 sun gears.
Came out of Ford dealership in the 1960’s. Have 2 sets. $65 each + shipping. See pictures. Email me by forum. Thanks Dan
IMG_5282.jpeg

Last post

Sold pending payment

4 Replies

282 Views

Last post by Dan Hatch
Sat Jan 17, 2026 4:49 pm
WTB: Dash lamp

Last post by Mark Chaffin « Sat Jan 17, 2026 4:23 pm
Replies: 1
by jaybee47 » Sat Jan 17, 2026 1:39 pm

First post

Hoping someone has one to sell to me. Thank you. Dash lamp,a.jpg

Last post

We have some still in stock. Give Dave a call Monday (951)226-7331

1 Replies

120 Views

Last post by Mark Chaffin
Sat Jan 17, 2026 4:23 pm
For Sale: Great Large Gabriel Three-Pipe Outboard Exhaust Whistle

Last post by GGZ « Sat Jan 17, 2026 4:16 pm
Replies: 1
by GGZ » Sat Jan 17, 2026 4:14 pm

First post

Another item from the garage with neat, early parts. A Gabriel large three-pipe, outboard exhaust whistle. This is used for mounting above the running board. This is about 40 total length, 7 1/2 tall and the tubes are 1 3/4 in diameter. It has original nickel plated over the brass. It has the original Gabriel tag which is nice and crisp. This...

Last post

Here is a Gabriel mounted on an early automobile:

1 Replies

139 Views

Last post by GGZ
Sat Jan 17, 2026 4:16 pm
For Sale: Large Fulton Co. Four Chime Aermore Exhaust Horn / Whistle

Last post by GGZ « Sat Jan 17, 2026 4:02 pm

by GGZ » Sat Jan 17, 2026 4:02 pm

The Fulton Co. Four Chime Aermore Exhaust Horn / Whistle Four chime automobile exhaust horn with the tallest chime measuring 21 1/2 tall and a 1 3/8 inlet. The top is stamped The Fulton Co. No. 00 Aermore Exhaust Horn . Very good, original condition. Price is 195.00 including shipping in the USA via FedEx Ground. I do not check messages here, so...

0 Replies

93 Views

Last post by GGZ
Sat Jan 17, 2026 4:02 pm
For Sale: Aermore No. 0 whistle with Fulton Cutout

Last post by GGZ « Sat Jan 17, 2026 3:53 pm
Replies: 2
by GGZ » Wed Jan 07, 2026 2:37 pm

First post

A four tube Aermore No.0 whistle with a Fulton cutout. The cutout has the double butterfly valve. The cutout body has been welded to make the opening smaller. This can be removed or left as-in. Currently the cutout has approximately 1 1/2 threaded into a 2 1/4 threaded in inlet. Approximately 2 3/4 overall ID original size. Needs a good soaking to...

Last post

Still for sale....

2 Replies

300 Views

Last post by GGZ
Sat Jan 17, 2026 3:53 pm
'27 frame, motor, loose parts

Last post by Martinbuilt « Sat Jan 17, 2026 3:40 pm
Replies: 18
by Martinbuilt » Thu Dec 04, 2025 4:52 pm

First post

I'm going to be shifting some things around in the shop, so if i can re-home this soon...
Otherwise, everything gets buried until i'm bored.
No title. I wanted to build a pig 'n ford type racer.
Super nice frame. Clean, painted, lovely. (I drilled out the rivets, and removed the running board supports, but they are here.)
Numbers are present.
'27...

Last post

Still moving my shop around. It would be easier if i owned fewer things..
Just sayin'...

18 Replies

1716 Views

Last post by Martinbuilt
Sat Jan 17, 2026 3:40 pm
Holley G Pats Pending carburetor

Last post by Corey Walker « Sat Jan 17, 2026 1:07 pm
Replies: 1
by Corey Walker » Tue Jan 13, 2026 5:12 pm

First post

Completely disassembled and cleaned, new venturi, float, float valve, reconditioned spray needle and spray nozzle, throttle shaft bushings installed, crack free bowl, test run. $365 postpaid to continental USA email: wlkma9@gmail.com

Last post

Back to top.

1 Replies

253 Views

Last post by Corey Walker
Sat Jan 17, 2026 1:07 pm
FS cowl gas tank

Last post by TXGOAT2 « Sat Jan 17, 2026 11:27 am
Replies: 9
by Karl Von Neumann » Thu Dec 11, 2025 9:24 am

First post

Cowl gas tank does not leak solder has been touched up round the outlet. Over flow tube is broken off at the outlet Decent looking usable tank $200 plus the ride or local pick up pleasant prairie wisconsin can sell you the straps for an additional 50$

Last post

I don't think any two of them were actually 100% identical, contrary to the legend.

9 Replies

743 Views

Last post by TXGOAT2
Sat Jan 17, 2026 11:27 am
Simmons carb FS

Last post by Harley_97 « Sat Jan 17, 2026 9:42 am
Replies: 1
by Dan Hatch » Fri Jan 16, 2026 3:43 pm

First post

Here is a Simmons carb I don’t need. Looks good, but is missing the flap and drain screw. Look at pictures. $60 + shipping. Email me by forum. Thanks Dan
IMG_5289.jpeg
IMG_5290.jpeg
IMG_5291.jpeg

Last post

Dan, I will take it, email sent

1 Replies

180 Views

Last post by Harley_97
Sat Jan 17, 2026 9:42 am
crank with ratchet

Last post by Melba Nolan « Sat Jan 17, 2026 12:39 am
Replies: 1
by Melba Nolan » Sat Jan 03, 2026 5:33 pm

First post

For sale: crank handle with starting ratchet $45 plus shipping
crank handle turns freely
20230222_085303.jpg

Last post

move to top

1 Replies

368 Views

Last post by Melba Nolan
Sat Jan 17, 2026 12:39 am
brass hubcaps

Last post by Melba Nolan « Sat Jan 17, 2026 12:39 am
Replies: 3
by Melba Nolan » Sun Jan 04, 2026 10:13 pm

First post

20220721_195820.jpg 20220721_195926.jpg

For sale: brass hubcaps. $45 plus shipping for all 3

Last post

move to top

3 Replies

459 Views

Last post by Melba Nolan
Sat Jan 17, 2026 12:39 am
starter bendix parts

Last post by Melba Nolan « Sat Jan 17, 2026 12:38 am
Replies: 2
by Melba Nolan » Wed Oct 29, 2025 2:52 pm

First post

For sale: starter bendix parts $200 plus postage
over $500 plus some not available

20250701_162043.jpg 20250701_162018.jpg

Last post

move to top

2 Replies

456 Views

Last post by Melba Nolan
Sat Jan 17, 2026 12:38 am
Hayes rim

Last post by Melba Nolan « Sat Jan 17, 2026 12:37 am
Replies: 3
by Melba Nolan » Sat Jan 03, 2026 5:20 pm

First post

20250324_141159.jpg 20250322_184948.jpg 20250322_184855.jpg

For sale: Hayes rim $100 plus shipping

Last post

move to top

3 Replies

496 Views

Last post by Melba Nolan
Sat Jan 17, 2026 12:37 am
wire wheel hub caps

Last post by Melba Nolan « Sat Jan 17, 2026 12:34 am
Replies: 3
by Melba Nolan » Sun Jan 04, 2026 9:35 pm

First post

For sale: Ford script wire wheel hub caps all for $65 plus postage
20241027_101908.jpg

Last post

move to top

3 Replies

445 Views

Last post by Melba Nolan
Sat Jan 17, 2026 12:34 am
Ford jack

Last post by Melba Nolan « Sat Jan 17, 2026 12:33 am

by Melba Nolan » Sat Jan 17, 2026 12:33 am

For sale: Ford script jack. works good $50 plus postage

20260107_160659 - Copy.jpg 20260107_160708.jpg

0 Replies

135 Views

Last post by Melba Nolan
Sat Jan 17, 2026 12:33 am
FOUND... THANK YOU. WTB - Pair 1913-14 E&J Black & Brass Side Lights

Last post by mklooksup « Fri Jan 16, 2026 11:14 pm
Replies: 3
by 26Tpickup » Sat Jan 27, 2024 10:32 pm

First post

I just picked up a new 1914 Speedster. But someone removed the Side Lights. I'm hoping for a nice pair and brackets. Call/text me pictures and asking price to (210) 748-84 niner one; or email me...
Thanks,
Jerry

Last post

Rick, are these still available?

Manny

3 Replies

794 Views

Last post by mklooksup
Fri Jan 16, 2026 11:14 pm
HCCT

Last post by Moxie26 « Fri Jan 16, 2026 6:24 pm

by Moxie26 » Fri Jan 16, 2026 6:24 pm

What is the proper turning speed when testing coils?

0 Replies

127 Views

Last post by Moxie26
Fri Jan 16, 2026 6:24 pm
Sold: Model A Marvel Schebler Carburetor

Last post by GGZ « Fri Jan 16, 2026 5:56 pm
Replies: 5
by GGZ » Tue Dec 16, 2025 6:14 pm

First post

Sold to Larry! Thank you.A good Model A Marvel Schebler carburetor. These are great for Model As and can be adapted to Ts as well. Everything is there with no wear. Price is 100.00 including shipping via FedEx Ground in the USA. I do not check messages here so call me at 734-730-4274 or email directly at motoringicons@hotmail.com Thanks

Last post

Still for sale

5 Replies

507 Views

Last post by GGZ
Fri Jan 16, 2026 5:56 pm
FS: Excellent E&J Black/Brass Taillamp

Last post by George House « Fri Jan 16, 2026 5:42 pm
Replies: 2
by George House » Fri Jan 09, 2026 4:55 pm

First post

Pat’ Dec 9, 1908…Original paint and perfect condition. Complete. No cracks in glass or brass. Believe for 1913-1914 Ford. Only $160 + shipping.
gwhouse731(at)gmail(dot)com. First caller gets it

Last post

**final price reduction**

2 Replies

343 Views

Last post by George House
Fri Jan 16, 2026 5:42 pm
FS: Large 3 Tier Black/Brass Cowl Lamp

Last post by George House « Fri Jan 16, 2026 5:39 pm
Replies: 2
by George House » Fri Jan 09, 2026 4:46 pm

First post

No name. Beautiful brass & glass. No cracks or dents. Has burner. Entire chimney nickel plated brass as is entire font
Beautiful multifaceted glass in rear. Only $ 90 + the ride.
gwhouse731(at)gmail(dot)com

Last post

** final price reduction**

2 Replies

261 Views

Last post by George House
Fri Jan 16, 2026 5:39 pm
FS: Early Front Spring Clip/ Motor Mount

Last post by George House « Fri Jan 16, 2026 5:37 pm
Replies: 2
by George House » Sun Jan 11, 2026 4:30 pm

First post

Only $60 + USPS flat rate small. Another sandblasted recently sold here for $100. All threads used tap or dies already and in good condition.
gwhouse731(at)gmail(dot)com

Last post

**only btt this ad until it falls into obscurity**

2 Replies

245 Views

Last post by George House
Fri Jan 16, 2026 5:37 pm
Fairbanks HCCT

Last post by TFan « Fri Jan 16, 2026 4:12 pm
Replies: 1
by KWTownsend » Fri Jan 16, 2026 11:57 am

First post

For Sale: Early Fairbanks Hand Cranked Coil Tester in original unrestored condition. The magnets have been recharged, the meter was recalibrated by Bob Cascisa, and the meter mounting point shows a repair. This HCCT works perfectly! It is very heavy and awkward to move, so handles were fabricated and attached to the cast iron base to facilitate...

Last post

Looks to be set up for a flat belt so it can be motorized, Sweet! Jim

1 Replies

247 Views

Last post by TFan
Fri Jan 16, 2026 4:12 pm
FS - Early Firewall Bracket Set $100 + shipping

Last post by John_Aldrich « Fri Jan 16, 2026 11:39 am
Replies: 2
by Dennis Fleming » Thu Jun 26, 2025 5:34 pm

First post

Nice set of firewall brackets.
$100 plus Shipping for the set.
Thank you IMG_2187.jpeg IMG_2188.jpeg

Last post

What year will they fit?

2 Replies

1080 Views

Last post by John_Aldrich
Fri Jan 16, 2026 11:39 am
WTB…..Rare Hubcap

Last post by TRDxB2 « Fri Jan 16, 2026 11:01 am
Replies: 5
by WorldChamp1914 » Fri Jan 02, 2026 12:53 am

First post

IMG_7249.png

Last post

IMG_7249.png

Looks like NWVS (North West Vintage Speedsters) is your lead
They are also called PG&E or PGE wheels

128062.jpg
128064.jpg
128063.jpg
--
Lugs or them
128066.jpg

5 Replies

806 Views

Last post by TRDxB2
Fri Jan 16, 2026 11:01 am
FS - 2 REPRO HUBCAPS

Last post by brassford « Fri Jan 16, 2026 10:41 am
Replies: 7
by brassford » Tue Nov 18, 2025 3:07 pm

First post

17 - 25 Reproduction hubcaps. Chrome plated. The one on the right stamping isn't as sharpe as the other. $60 SHIPPING INCLUDED

Enjoy Your Day!

Last post

$60 including shipping

7 Replies

1043 Views

Last post by brassford
Fri Jan 16, 2026 10:41 am
Spot light

Last post by jawa « Fri Jan 16, 2026 6:22 am
Replies: 1
by jawa » Mon Jan 12, 2026 8:40 pm

First post

The overall height is 14 , 11 diameter and the lens needed looks to be about 9 1/4 . Would work great on a T fire truck. $175 plus shipping.

Last post

BTT new price

1 Replies

292 Views

Last post by jawa
Fri Jan 16, 2026 6:22 am
Battery tops NOS. FS reduced

Last post by Dan Hatch « Fri Jan 16, 2026 3:37 am
Replies: 5
by Dan Hatch » Sat Jan 10, 2026 2:38 pm

First post

Here are a pair of NOS Battery cell tops for the 1925 Rubber case Ford battery. They don’t say Ford on the but came extra with my NOS Ford battery. Taken out of a Ford dealership in the 1960. $20 for the pair + shipping. Email me by forum. Dan
IMG_5149.jpeg

IMG_5150.jpeg
IMG_5151.jpeg

Last post

Back to the top

5 Replies

696 Views

Last post by Dan Hatch
Fri Jan 16, 2026 3:37 am
FF early parts

Last post by KimDobbins « Thu Jan 15, 2026 10:46 pm
Replies: 5
by KimDobbins » Thu Jan 15, 2026 1:35 pm

First post

1 pair body to firewall brackets, $40. Rear fender
brackets, $35 per pair. Top iron to top socket brackets $30 each. Steering post brackets $150 each. Carb adjuster rods, 2 hole $125, 4 hole $225 each. All plus shipping. kdmks at att.net.

Last post

All parts are sold.

5 Replies

476 Views

Last post by KimDobbins
Thu Jan 15, 2026 10:46 pm
FS KR Wilson Trans. Head for Engine Stand SOLD

Last post by Pep C Strebeck « Thu Jan 15, 2026 10:19 pm
Replies: 2
by Tparts » Thu Jan 15, 2026 9:25 pm

First post

For Sale is an adapter that is made for a KR Wilson engine stand. It is made to hold a transmission and has the special threaded plug to mount it. I believe it is for a V8 Ford application but please check to be sure. SOLD plus shipping Lang’s 1-800-872-7871

Last post

BB-174, Transmission Adapter, BB Truck.

2 Replies

291 Views

Last post by Pep C Strebeck
Thu Jan 15, 2026 10:19 pm
FS Pair of 1pc spindles (1922 style) SOLD

Last post by Tparts « Thu Jan 15, 2026 9:13 pm
Replies: 2
by Tparts » Thu Jan 15, 2026 9:00 pm

First post

For Sale are a pair of one piece front axle spindles. These are the 1922-3 style. SOLD plus shipping Lang’s 1-800-872-7871

Last post

Pending to Michael. Please call us in the morning.

2 Replies

188 Views

Last post by Tparts
Thu Jan 15, 2026 9:13 pm
FS 1917-25 Nice Steering Wheel $85.00

Last post by Tparts « Thu Jan 15, 2026 8:46 pm

by Tparts » Thu Jan 15, 2026 8:46 pm

For sale is a very nice 1917-1925 Steering Wheel complete with spider. No cracks in rim. $85.00 Lang’s 1-800-872-7871

0 Replies

155 Views

Last post by Tparts
Thu Jan 15, 2026 8:46 pm
FS Accessory Anti-Theft Device $75.00

Last post by Tparts « Thu Jan 15, 2026 8:10 pm
Replies: 3
by Tparts » Wed Jan 07, 2026 10:23 pm

First post

For Sale is a rare accessory anti theft device. It is connected to the ignition system and will ground out when the car travels over uneven ground. There isn’t any manufacturer marking on the unit. $75.00 plus shipping. Lang’s 1-800-872-7871

Last post

Down ten bucks

3 Replies

465 Views

Last post by Tparts
Thu Jan 15, 2026 8:10 pm
FS 1915 Touring Tail Light/Lic Plate BKT SOLD

Last post by Tparts « Thu Jan 15, 2026 8:07 pm
Replies: 5
by Tparts » Thu Jan 01, 2026 5:37 pm

First post

For Sale is an original 1915-early 16 Tail Light, License Plate Bracket in good condition. SOLD plus shipping. Lang’s 1-800-872-7871

Last post

Down another ten bucks

5 Replies

694 Views

Last post by Tparts
Thu Jan 15, 2026 8:07 pm
FS New All Gray 30 x 3 Non Skid Firestone Tire $125.00

Last post by Tparts « Thu Jan 15, 2026 8:04 pm
Replies: 7
by Tparts » Wed Dec 10, 2025 4:34 pm

First post

FS Brand New Old Stock ( in the wrapper ) 30 X 3 Firestone Gray Non Skid Tire. Only one available. Originally sold for $320.00 each, but has not been available for over 10 years.
$125.00 plus shipping. Lang’s 1-800-872-7871

Last post

Another drop in price

7 Replies

770 Views

Last post by Tparts
Thu Jan 15, 2026 8:04 pm
FS “New Gray 30 X 3-1/2 Universal Rib Tire $100.00

Last post by Tparts « Thu Jan 15, 2026 7:57 pm
Replies: 7
by Tparts » Wed Dec 10, 2025 5:02 pm

First post

FS Solid Gray 30 X 3-1/2 Universal Straight Rib Tire in the Black Plastic Wrapper. Only One Available. These haven’t been available for over 10 years. Originally $240.00 each $100.00 plus shipping. Lang’s 1-800-872-7871

Last post

Down again

7 Replies

815 Views

Last post by Tparts
Thu Jan 15, 2026 7:57 pm
October 1913 Motor Free delivery to Luray Swap Meet)!

Last post by Tparts « Thu Jan 15, 2026 7:53 pm
Replies: 6
by Tparts » Thu Apr 24, 2025 3:15 pm

First post

For Sale October 1913 Motor. ( Please review photos for condition). $425 with Free delivery to Luray Swap Meet
Lang’s 1-800-872-7871

Last post

Still available

6 Replies

2511 Views

Last post by Tparts
Thu Jan 15, 2026 7:53 pm
FS Original Accessory Picnic Set in Case $175.00

Last post by Tparts « Thu Jan 15, 2026 7:49 pm
Replies: 1
by Tparts » Mon Jan 12, 2026 9:12 pm

First post

For Sale is an original “Icy Hot” Picnic Set with suitcase. There are 4 plates, knives, forks, and spoons. Unfortunately the Thermos is missing. $175.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price drop

1 Replies

425 Views

Last post by Tparts
Thu Jan 15, 2026 7:49 pm
FS Accessory Fan Blade $20.00

Last post by Tparts « Thu Jan 15, 2026 7:40 pm
Replies: 8
by Tparts » Thu Jan 01, 2026 9:23 pm

First post

For sale is an interesting accessory Fan Blade. Look carefully at the photos for condition as some blades are bent. Comes with a 26-27 extended fan hub. $20.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price decrease

8 Replies

844 Views

Last post by Tparts
Thu Jan 15, 2026 7:40 pm
Rear Hub Puller FS

Last post by Dan Hatch « Thu Jan 15, 2026 7:00 pm
Replies: 2
by Dan Hatch » Sat Jan 10, 2026 10:36 am

First post

Here is an extra rear hub puller to me. I think it is for a TT. Measure the same as my Ford TT puller. Don’t see any markings on it. See pictures. $40 + shipping. Email me by the forum. Dan
IMG_5118.jpeg
IMG_5119.jpeg

Last post

Back to the top

2 Replies

372 Views

Last post by Dan Hatch
Thu Jan 15, 2026 7:00 pm
FS STEERING ARMS WITH SPEEDO HOLE

Last post by got10carz « Thu Jan 15, 2026 6:13 pm

by got10carz » Thu Jan 15, 2026 6:13 pm

For Sale arms pictured. The ones marked $40 look good. The ones marked $30 need repair around tie rod hole. Steve 701 212 5009.

0 Replies

118 Views

Last post by got10carz
Thu Jan 15, 2026 6:13 pm
Original Main bearing bolts and nuts FS Lower Price !

Last post by Ruxstel24 « Thu Jan 15, 2026 5:45 pm
Replies: 2
by Ruxstel24 » Wed Jan 07, 2026 3:23 pm

First post

I have 2 sets, threads are good. $50 each includes shipping USA 48.
Please call or text 33zero 3nine one nine zero 62
Thanks Dave

Last post

TTT please

2 Replies

307 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:45 pm
Engine mount repair brackets FS

Last post by Ruxstel24 « Thu Jan 15, 2026 5:44 pm
Replies: 5
by Ruxstel24 » Wed Jan 07, 2026 1:06 pm

First post

I have one pair and 3 other single pieces.
$65 for all of them including shipping to USA 48
Please call or text me at 33zero 3nine one nine zero 62 Thanks Dave

Last post

TTT please

5 Replies

358 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:44 pm
DUNN counterweights FS Lower price !

Last post by Ruxstel24 « Thu Jan 15, 2026 5:44 pm
Replies: 3
by Ruxstel24 » Mon Dec 29, 2025 9:34 am

First post

I have a set, possibly 2 (I have to look again)
No bolts but they’re nothing special.
$150 per set and I’ll include shipping to 48 USA
Best way to contact me is 33zero 3nine one nine zero 62 Dave

Last post

TTT please

3 Replies

418 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:44 pm
Horn buttons FS Lower price ! :SOLD:

Last post by Ruxstel24 « Thu Jan 15, 2026 5:43 pm
Replies: 4
by Ruxstel24 » Fri Dec 26, 2025 12:52 pm

First post

I have 3 column mount horn switches and brackets. $32ea including shipping to 48 USA
And one steering wheel nut switch (Canadian?)
$30 including shipping USA 48
Best way to contact me is call or text 33zero 3nine one nine zero 62

Last post

All buttons are sold to Bryce, thanks !

4 Replies

498 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:43 pm
FS High Hood Dash

Last post by JZSlenker « Thu Jan 15, 2026 2:10 pm
Replies: 1
by JZSlenker » Sun Jan 04, 2026 5:49 pm

First post

Dash is in pretty good shape. Soaked in EvapoRust and then coated in light oil for shipment. Buyers pays actual shipping via PayPal. Make reasonable offer.

Last post

back to top

1 Replies

298 Views

Last post by JZSlenker
Thu Jan 15, 2026 2:10 pm
1912 Holley H1 carburetor

Last post by Corey Walker « Thu Jan 15, 2026 2:03 pm
Replies: 1
by Corey Walker » Sat Jan 10, 2026 1:59 pm

First post

Completely disassembled and cleaned, new venturi, float, viton tipped needle and seat conversion, new spray needle with nice original knob, excellent throttle shaft with bushings installed, test run. There were a few cracks in the bowl I repaired. $575 postpaid to continental USA or $475 without the inlet elbow in case you have a carb already and...

Last post

Back to top.

1 Replies

359 Views

Last post by Corey Walker
Thu Jan 15, 2026 2:03 pm
FS 1911-12 “Ford” Transmission Door SOLD

Last post by Tparts « Thu Jan 15, 2026 1:47 pm
Replies: 2
by Tparts » Wed Jan 07, 2026 10:09 pm

First post

For Sale is a very nice “Ford Script” Transmission Door for late 1911-1912 tapered transmission cover. It is in excellent condition with no pitting and a very crisp script. It has been glass beaded. SOLD plus shipping. Lang’s 1-800-872-7871

Last post

Price drop

2 Replies

436 Views

Last post by Tparts
Thu Jan 15, 2026 1:47 pm
WTB Improved Rad Shell

Last post by Ken Buhler « Thu Jan 15, 2026 10:36 am

by Ken Buhler » Thu Jan 15, 2026 10:36 am

I'm hoping to find a mint condition tall Canadian nickle rad shell. Dan Hatch sold one a few years ago and if it didn't get used, please write to me.
Ken Buhler

0 Replies

123 Views

Last post by Ken Buhler
Thu Jan 15, 2026 10:36 am
FS NOS Champion X Spark Plugs (2)

Last post by Ken Buhler « Thu Jan 15, 2026 10:16 am
Replies: 1
by JZSlenker » Thu Jan 15, 2026 10:11 am

First post

NOS Champion X Spark Plugs from the 1950s.
Make Offer
Pay by Paypal

Last post

Email sent

1 Replies

210 Views

Last post by Ken Buhler
Thu Jan 15, 2026 10:16 am
***SOLD***FOR SALE - 1911 / 1912 Engine

Last post by RGould1910 « Thu Jan 15, 2026 9:10 am
Replies: 16
by Lcjudge » Fri Jun 07, 2024 8:26 pm

First post

If you've got an early T here's an engine for you. According to the T SN listing, this engine was in a car sold in Dec. 1911. There isn't a casting date on the engine (that I've found). The SN on it is 88211, So this was probably in a 1912 Model year car. However, it could have been in an 11 sold late. Here in Ky we didn't have a title law until...

Last post

The pan ears have 7 rivets. Tommy sent photos.

16 Replies

3570 Views

Last post by RGould1910
Thu Jan 15, 2026 9:10 am
Sale pending 1912 engine, transmission, magneto assembly complete

Last post by RGould1910 « Thu Jan 15, 2026 9:07 am
Replies: 2
by RGould1910 » Wed Jan 14, 2026 8:49 am

First post

Early 1912 engine no. 88211, complete with correct parts including head, pan, tramsnmission cover, pedals, etc.
Purchased from my good friend Tommy Turner a few years back. I recently suffered a downturn putting an end to any major restorations. The assembly has never been removed from the heavy wooden crate used to send it to me. Here is a link...

Last post

The pan ears have 7 rivets from photos Tommy sent.

2 Replies

550 Views

Last post by RGould1910
Thu Jan 15, 2026 9:07 am
Brass horn flex tube 1/2 " diameter

Last post by Grntea « Thu Jan 15, 2026 12:09 am
Replies: 1
by RichJ » Wed Jan 14, 2026 7:22 am

First post

31 long new horn brass flex tube. 25.00 plus15.00 shipping.

Last post

Email sent

1 Replies

250 Views

Last post by Grntea
Thu Jan 15, 2026 12:09 am
19" accessory wire disc wheel lock ring F/S

Last post by Layden Butler « Wed Jan 14, 2026 11:19 pm

by Layden Butler » Wed Jan 14, 2026 11:19 pm

Wire and disc wheel lock ring for non-Ford wheels, 19 rim size. nice ring not bent or rusty, suitable for plating. $99, packaging included, 48 state shipping $20. Contact me thru MTFCA messaging. I also have for sale one 18 , same price.
Measurements in pictures are inside and outside diameters.
Happy to answer any questions.

0 Replies

152 Views

Last post by Layden Butler
Wed Jan 14, 2026 11:19 pm
WTB Bosch plate dist and one 21” wire wheel

Last post by Dan McEachern « Wed Jan 14, 2026 10:23 pm
Replies: 6
by Noetall72 » Tue Jan 06, 2026 6:01 pm

First post

I am looking for a Bosch plate distributor. I am also looking for a single wire wheel. I would like it to not be painted up all pretty but more of a rusty patina that can be used on a speedster, to hopefully go fast. Haha.
I am located in Indiana.
Thanks for your help.

Last post

Chaffins has new front plate distributors for sale. Just FYI

6 Replies

523 Views

Last post by Dan McEachern
Wed Jan 14, 2026 10:23 pm
FS 1910-13 2pc Driveshaft Housing SOLD

Last post by Henry K. Lee « Wed Jan 14, 2026 2:49 pm
Replies: 5
by Tparts » Thu Jan 08, 2026 6:59 pm

First post

For Sale is a very nice 1910-13 Two Piece Driveshaft Housing complete ad shown in the photos. Includes the early flange with special boss where the grease cup threads in, Ford Factory number T191 driveshaft spool and front ball. No internal parts included. SOLD plus shipping Lang’s 1-800-872-7871

Last post

Economics and those interested vs inflation.

5 Replies

630 Views

Last post by Henry K. Lee
Wed Jan 14, 2026 2:49 pm
Hall-Scott Ruckstell Shift Lock Assembly

Last post by old_charley « Wed Jan 14, 2026 2:23 pm

by old_charley » Wed Jan 14, 2026 2:23 pm

This shift-lock assembly is in excellent condition with minimal wear in the shift arm and body. The plunger and spring are new. It should work just fine as it is. This isn't the same one I advertised a couple weeks ago. I'd like $250 for it. Please contact me through the forum email system if you are interested. Thanks.
Bryan Ostergren
Ruckstell...

0 Replies

260 Views

Last post by old_charley
Wed Jan 14, 2026 2:23 pm
(SOLD) Springfield Tire tool for Clincher Tires

Last post by jaybee47 « Wed Jan 14, 2026 10:53 am
Replies: 1
by WaltM » Tue Jan 13, 2026 1:21 pm

First post

(SOLD) Springfield tire tool for clincher tires. Adjusting screw is in good condition. Special tire tool with hook to grab edge of clincher rim. Price $125 plus shipping. Tool measures 15-inches in length. Email, call or text (248) 894-75fiveone. Thanks, Walt

Last post

Walt. I'd like to buy the Springfield tool. Jay.

1 Replies

358 Views

Last post by jaybee47
Wed Jan 14, 2026 10:53 am
FS late style front motor spring mount

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:06 am
Replies: 1
by Karl Von Neumann » Mon Dec 15, 2025 1:20 pm

First post

Late style engine spring mounts one has the apron bolt snapped off. Few of the top bolts are missing. 25$ each plus the ride

Last post

Move to top

1 Replies

319 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:06 am
FS early front mount

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:05 am
Replies: 1
by Karl Von Neumann » Mon Dec 15, 2025 1:21 pm

First post

Early style front engine spring mounts with caps no ubolts sorry. 30 each plus the ride

Last post

Move to top

1 Replies

314 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:05 am
FS brass holley G body

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:05 am
Replies: 2
by Karl Von Neumann » Wed Dec 10, 2025 5:49 pm

First post

Brass holley g body steel bowl 35$ plus the ride for parts a restore

Last post

Move to top

2 Replies

513 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:05 am
FS iron holley G

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:05 am
Replies: 2
by Karl Von Neumann » Wed Dec 10, 2025 5:50 pm

First post

Iron body holley g for parts or rebuild 50$ pulse the ride

Last post

Move to top

2 Replies

453 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:05 am
FS front wire wheel hubs

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:04 am
Replies: 2
by Karl Von Neumann » Wed Dec 10, 2025 5:51 pm

First post

Wire wheel front hubs 150 each plus the ride some have studs some don't just assume they need studs

Last post

Move to top

2 Replies

615 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:04 am
Bulk black era coil boxes

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:04 am
Replies: 3
by Karl Von Neumann » Wed Dec 10, 2025 1:50 pm

First post

I have tons of 16 to 25 coil boxes 5 to 10$ depending on the condition bulk discounts I need to thin this out send me a message if you interested in some

Last post

Move to top

3 Replies

625 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:04 am
Wanted Rajo B,BB,BBR single inlet updraft manifold with water tube

Last post by Mark Herdman « Tue Jan 13, 2026 7:19 pm
Replies: 5
by Mark Herdman » Thu Sep 12, 2024 11:54 pm

First post

Wanted

Rajo B,BB,BBR single inlet updraft manifold with water tube as in this photo to rebuild this Australian original race car to its 1925 form. Any help appreciated.

Rajo 33.jpg

Last post

Look at the bright side. As soon as you fabricate one, you'll find one.😄

Exactly! Happened many a time. Restore what you have first and only make the part as a last resort.

5 Replies

1368 Views

Last post by Mark Herdman
Tue Jan 13, 2026 7:19 pm
WTB Weber Cast Iron Wheel dollies

Last post by Shelbycsx « Tue Jan 13, 2026 6:43 pm
Replies: 4
by BobP » Thu Jan 08, 2026 6:03 pm

First post

I want to buy 1 or more Weber cast iron wheel dollies. They are patent dated 1910 plus more. Check the pictures. I have 3 of them, 2 complete and 1 with the castors missing, so 1 would be nice, or 2, or another set would also be fine, thanks, Bob. 507 458 6778.

Last post

If you decide to sell i'm interested.

4 Replies

427 Views

Last post by Shelbycsx
Tue Jan 13, 2026 6:43 pm
FS: Table Load Model T Goodies

Last post by George House « Tue Jan 13, 2026 4:54 pm
Replies: 4
by George House » Mon Jan 12, 2026 4:01 pm

First post

Beginning Top Left: TT C Cab front and rear corner brackets (2) + 1 curtain frame bracket.$25 Accy cast or forged crankcase ‘ears’ Pat’d April 1918 Zoom In! $40, Pair pan/hogshead/block brackets.$35 Really nice NH Straight Thru Carb and manifold. Removed it and replaced with a U&J Only $350, Powder coated ‘17-‘23 sheet metal radiator lower apron...

Last post

TT corner brackets and pr cast crankcase ‘ears’ spoken for and all boxed up. Thanks Charlie and MTFCA

4 Replies

684 Views

Last post by George House
Tue Jan 13, 2026 4:54 pm
WTB - Coupe Seat Bracket

Last post by EdWhite « Tue Jan 13, 2026 4:45 pm

by EdWhite » Tue Jan 13, 2026 4:45 pm

Looking for this seat bracket for the passenger side of a 24/25 coupe let me know if you have anything that looks like this thanks.

0 Replies

112 Views

Last post by EdWhite
Tue Jan 13, 2026 4:45 pm
Wood locking steering wheel

Last post by Joe Bell « Tue Jan 13, 2026 4:17 pm
Replies: 6
by Wingnut » Fri Jan 09, 2026 7:04 pm

First post

Up for sale is an all wood locking steering wheel with key and center horn button all mounting hardware included. Asking $200 plus shipping. interested can text me at 3threezero 24one two6four1. I did try, to no avail, to post pics, go figure, if you text me I will text pics back. Wingnut

Last post

Apco was the horn button on the one I had just like that.

6 Replies

643 Views

Last post by Joe Bell
Tue Jan 13, 2026 4:17 pm
FS 1909-11 Original Hood Hooks SOLD

Last post by Gleaner « Tue Jan 13, 2026 3:38 pm
Replies: 1
by Tparts » Mon Jan 12, 2026 8:51 pm

First post

For Sale are a set of 4 original hood hold downs. 2 have very little wear with factory numbers. Please inspect the photos for the condition of each. SOLD for the set of 4. Lang’s 1-800-872-7871

Last post

Email sent

1 Replies

328 Views

Last post by Gleaner
Tue Jan 13, 2026 3:38 pm
FS: J. J. Miller Tire Tool for Clincher and Balloon Tires

Last post by WaltM « Tue Jan 13, 2026 1:29 pm
Replies: 1
by WaltM » Tue Jun 03, 2025 7:58 am

First post

For sale J. J. Miller Tire Tool for Clincher and Balloon Tires. Tool is used to remove and install clincher and balloon tires. The jaws are used to break the bead and the swivel end is used to remove and install the tire. Tool measures 21-1/2 inches in length. Price $140 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Last post

to the top

1 Replies

1578 Views

Last post by WaltM
Tue Jan 13, 2026 1:29 pm
FS: Marquette Mfg Co. Clincher Tire Tool

Last post by WaltM « Tue Jan 13, 2026 1:28 pm

by WaltM » Tue Jan 13, 2026 1:28 pm

For sale Marquette Mfg Co. clincher tire tool. Tire tool for removing and installing clincher tires. Price $160 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

206 Views

Last post by WaltM
Tue Jan 13, 2026 1:28 pm
FS Ford TT 4069 Tire Iron SOLD

Last post by Charlie_26_TT_Ccab « Mon Jan 12, 2026 11:57 pm
Replies: 1
by Tparts » Mon Jan 12, 2026 8:37 pm

First post

For Sale is an original Ton Truck Tire Iron supplied by Ford for Ton Truck rear tire changes. SOLD plus shipping Lang’s 1-800-872-7871

Last post

Email sent.

1 Replies

283 Views

Last post by Charlie_26_TT_Ccab
Mon Jan 12, 2026 11:57 pm
FS Ford U-Joint Entering Tool 5Z-196 SOLD

Last post by Bill Everett « Mon Jan 12, 2026 11:48 pm
Replies: 1
by Tparts » Mon Jan 12, 2026 8:14 pm

First post

For Sale is an original Ford 5Z-196 U-Joint installation tool. It is used to turn the u-joint allowing it to be installed into the back of the engine. SOLD plus shipping Lang’s 1-800-872-7871

Last post

E-Mail sent.

1 Replies

359 Views

Last post by Bill Everett
Mon Jan 12, 2026 11:48 pm
Fairbanks screw press

Last post by Mark Chaffin « Mon Jan 12, 2026 10:56 pm
Replies: 4
by RGould1910 » Mon Jan 12, 2026 11:14 am

First post

Same press as illustrated throughout the Ford Service Manual. Smooth action, no thread wear. Local pick up. $750. Will sell stand with press only. Negotiable. Contact me by email through the website and leave your contact info
Richard Gould
20260112_074942.jpg 20260112_075840.jpg
20240315_112718.jpg
20260112_092541.jpg

Last post

Yes. It is exactly the same tool as dad's. Probably the most useful of them all. Very rare and hard to find. Well worth the asking price.

4 Replies

545 Views

Last post by Mark Chaffin
Mon Jan 12, 2026 10:56 pm
FS Ford Rear Axle Pinion Nut Wrench 5Z-165 SOLD

Last post by Pep C Strebeck « Mon Jan 12, 2026 8:31 pm
Replies: 1
by Tparts » Mon Jan 12, 2026 8:29 pm

First post

For Sale is an original Ford 5Z-165 Rear axle Pinion Gear Nut T Wrench. SOLD plus Shipping Lang’s 1-800-872-7871

Last post

PM sent on wrench.

1 Replies

240 Views

Last post by Pep C Strebeck
Mon Jan 12, 2026 8:31 pm
Wanted One 1915-27 Electric Headlamp Rim In Poor Condition

Last post by J1MGOLDEN « Mon Jan 12, 2026 8:14 pm
Replies: 6
by ModelTWoods » Fri Jan 09, 2026 4:39 pm

First post

Wanted: One 1915-27 electric headlamp rim in unusable condition. MUST have at least ONE usable bracket on backside with usable tabs. Rest of rim, unimportant, as I will cannibalize rim for one lens bracket. Willing to pay shipping. Contact me through this site's messenger.

Last post

I have a box of six or eight of those, I didn't know they were different.

Show me a photo and I''ll show you what I have in the box.

6 Replies

415 Views

Last post by J1MGOLDEN
Mon Jan 12, 2026 8:14 pm
FS Homemade Starter Bendex Head Puller $20.00

Last post by Tparts « Mon Jan 12, 2026 7:45 pm

by Tparts » Mon Jan 12, 2026 7:45 pm

For Sale is a well made version of Fords 5Z-323. Original version not included. $20.00 plus shipping. Lang’s 1-800-872-7871

0 Replies

214 Views

Last post by Tparts
Mon Jan 12, 2026 7:45 pm
FS Starter Bendex Head Puller SOLD

Last post by Tparts « Mon Jan 12, 2026 7:35 pm

by Tparts » Mon Jan 12, 2026 7:35 pm

For Sale is a Starter Bendex Head Puller. Marked with a Ford Script and 5Z-323. SOLD plus shipping. Lang’s 1-800-872-7871

0 Replies

166 Views

Last post by Tparts
Mon Jan 12, 2026 7:35 pm
1923 Engine with free delivery to Luray Swap meet

Last post by G.ARMS86 « Mon Jan 12, 2026 5:52 pm
Replies: 7
by G.ARMS86 » Wed Jul 23, 2025 9:50 pm

First post

Selling a July of ‘23 complete engine has compression. I have not tried to start it. Also has flat belt pulley attachment on transmission asking $550 or best reasonable offer. Serial number is 8,013,561. Please call or text George 2036873827 local pickup only located in Connecticut

Last post

Back to top

7 Replies

2397 Views

Last post by G.ARMS86
Mon Jan 12, 2026 5:52 pm
A few new Wizard/Simmons/Duplex parts coming in the Spring

Last post by Scott_Conger « Mon Jan 12, 2026 3:27 pm
Replies: 1
by Scott_Conger » Wed Dec 31, 2025 4:54 pm

First post

Response to my query recently was so bad that I am not planning on many parts, yet there was one fellow who seemed excited about the prospect, so I decided to proceed with a VERY small number of parts (like 4 or 5 each and that's it...)

I finished up a couple and will do the rest in the spring time

If you're interested in either needles or...

Last post

In 2 weeks, only 3 people have expressed any interest, solidifying my position that demand is statistically pretty much non-existent.

This is your one last chance to get on the list for a very limited number of parts.

If interested, EMAIL ME

thank you

1 Replies

414 Views

Last post by Scott_Conger
Mon Jan 12, 2026 3:27 pm
FS: EKERN Rear Axle Emergency Repair Fixture (1909-1925)

Last post by RajoRacer « Mon Jan 12, 2026 3:00 pm
Replies: 3
by WaltM » Fri Nov 07, 2025 2:14 pm

First post

For sale EKERN rear axle emergency repair axle fixture. Fixture axle rotates smoothly And threads are in great shape. Grease cup was filled with synthetic grease for long life. Clamps onto backing plate. Used as a temporary fix to get you home after an axle break. Works on small backing plate axles only. Price $175. plus shipping. Call or text...

Last post

It's in his ad.

3 Replies

598 Views

Last post by RajoRacer
Mon Jan 12, 2026 3:00 pm

New Topic

10430 topics

Page 1 of 105
- Jump to page:
1
2
3
4
5
…
105
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum