Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 45055 Views
-
Last post by love1913
Fri Jan 05, 2024 1:27 pm
-
-
FS: Brass Radiator Neck License Plate Bracket (SOLD)
Replies: 1
by
WaltM » Fri Apr 12, 2024 1:28 pm
First post
(SOLD) brass radiator neck license plate bracket. For speedster or brass era car. Neverout model 7 Rose MFG Co. The carriage bolts, washers, and nuts are steel painted brass. Price $120 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt
Last post
Voicemail sent. ~Bryan
- 1 Replies
- 226 Views
-
Last post by bryan831daniel
Fri Apr 12, 2024 6:01 pm
-
-
- 1 Replies
- 231 Views
-
Last post by RGould1910
Fri Apr 12, 2024 11:57 am
-
-
FS; Threads Restorer/chase National Tool (SOLD)
by
WaltM » Fri Apr 12, 2024 11:52 am
(SOLD) threads restorer tool by National. Tool is used to straighten and clean threads (thread chaser). Tool has six dies; 5/8 x18. 3/4 x 16, 7/8 x 14, 1 x 14, 1-1/8 x 12, and 1-1/4 x 12. Tool helps prevent cross threading. First die 5/8 x 18 will work on rear axles that have damaged threads from removing stubborn hubs. Tool clamps on the inside...
- 0 Replies
- 265 Views
-
Last post by WaltM
Fri Apr 12, 2024 11:52 am
-
-
- 0 Replies
- 202 Views
-
Last post by WaltM
Fri Apr 12, 2024 11:34 am
-
-
FS: Apco Perch removal Tool (SOLD)
by
WaltM » Fri Apr 12, 2024 11:30 am
(SOLD) APCO front axle perch removal tool. Good threads. Four jaws wrap around axle to push out perch. NOTE; tool will not remove 100 year old rusted in perches without some prep work. I have had good luck soaking perches in rust penetrant (couple of days), and then put the perch in vise (with brass jaws) and use the axle as leverage. Move axle...
- 0 Replies
- 258 Views
-
Last post by WaltM
Fri Apr 12, 2024 11:30 am
-
-
Running board tool box fs
by
CTLeonard » Fri Apr 12, 2024 11:22 am
Has had a hard time. Missing a latch extra holes and some dents. More was spent on primer than it's worth. Measures 21 ,9 deep 6 tall. 15.00 plus shipping. ctleonard64@gmail.com IMG_20240412_101040388.jpg IMG_20240412_101022948.jpg IMG_20240412_101015120.jpg IMG_20240412_100940653.jpg
- 0 Replies
- 225 Views
-
Last post by CTLeonard
Fri Apr 12, 2024 11:22 am
-
-
ignition switch
Replies: 7
by
dinosbunny » Sun Apr 07, 2024 11:44 pm
First post
For Sale... 19-25 ignition switch, original plate, switch and meter, has a reproduction pin type back plate with new tumbler from langs with 2 keys. All taken down to bare metal, primed, painted and tested for continuity, ready to install. $165.00 shipped anywhere in the lower 48.
switch1.jpg
switch2.jpg
switch3.jpg
switch4.jpg
Last post
Wish I jumped on this.
- 7 Replies
- 823 Views
-
Last post by vping
Thu Apr 11, 2024 8:34 pm
-
-
WTB Speedometer Cable & Housing
by
SurveyKing » Thu Apr 11, 2024 8:19 pm
Hello, I am in need of a decent speedometer cable and housing for my 1924 Touring with a Stewart 160 mounted on the right side of the dash. The length of the cable should be 63 . Call me or email me if you have something. Thank You very much.
Daniel Snell
Danielsnell2@twc.com
210-279786 4
- 0 Replies
- 149 Views
-
Last post by SurveyKing
Thu Apr 11, 2024 8:19 pm
-
-
for sale 15-16 steering gear case
Replies: 6
by
dinosbunny » Mon Apr 08, 2024 11:09 pm
First post
For Sale 15-16 brass steering gear case
$30 plus shipping
quad1.jpg
quad2.jpg
quad3.jpg
quad4.jpg
Last post
Gear box is sold pending payment
- 6 Replies
- 534 Views
-
Last post by dinosbunny
Thu Apr 11, 2024 7:31 pm
-
-
A I don't know coil. Sold, someone had a use for her
Replies: 5
by
CTLeonard » Thu Apr 11, 2024 1:43 pm
First post
Never seen one like this. Does anybody have to have it? ctleonard64@gmail.com IMG_20240411_123959979.jpg IMG_20240411_123942393.jpg IMG_20240411_123935083.jpg
Last post
The coil in the cleaner above also has the same lid !
- 5 Replies
- 489 Views
-
Last post by RajoRacer
Thu Apr 11, 2024 5:24 pm
-
-
coil box 17/25
Replies: 5
by
Melba Nolan » Mon Nov 13, 2023 7:58 pm
First post
For sale: coil box. In good condition. $155 plus postage.
20220607_092858.jpg 20220607_092949.jpg
20220607_092909.jpg
Last post
In 17' the switch was on the coil box.
- 5 Replies
- 789 Views
-
Last post by BarrettR
Thu Apr 11, 2024 4:39 pm
-
-
Wooden top bows available
Replies: 4
by
CTLeonard » Wed Apr 10, 2024 2:51 pm
First post
I've recently started to steam bend oak bows for model A roadsters. Thought I could offer up bows for the model T. It would require a pattern or at least a good drawing for me to go from. Any inquiries please email me at ctleonard64@gmail.com IMG_20240410_133912524.jpg IMG_20240410_133844716.jpg IMG_20240410_133832764.jpg IMG_20240410_133743880.jpg
Last post
Appreciate the offer. Thank you
- 4 Replies
- 370 Views
-
Last post by CTLeonard
Thu Apr 11, 2024 3:47 pm
-
-
FS 1926 roadster body
Replies: 25
by
Karl Von Neumann » Wed Jan 10, 2024 7:47 am
First post
1926 roadster body for sale real decent shape minor rust trunk lid window posts window (no glass) and gas tank included includes a historical document for a 27 $2000 located SE Wisconsin
Last post
Move to top
- 25 Replies
- 3142 Views
-
Last post by Karl Von Neumann
Thu Apr 11, 2024 3:43 pm
-
-
20 25 roadster body project
Replies: 4
by
Karl Von Neumann » Tue Feb 20, 2024 2:05 pm
First post
Figured I'd throw this out there decent clean sheet metal of a 20 to 25 roadster turtle Included chassis not included at this time what's included body. Turtle 4 fenders 2 rears are so so but workable fronts are very nice and 2 running boards will not ship local pick up $1200 OBO located pleasant prairie wisconsin
Last post
Move to top
- 4 Replies
- 1069 Views
-
Last post by Karl Von Neumann
Thu Apr 11, 2024 3:43 pm
-
-
WTB Original 1912 Hubcaps - one or more
Replies: 5
by
1913Runabout » Thu Apr 04, 2024 12:58 pm
First post
I'm looking to buy one or more original 1912 only hubcaps in serviceable condition. I have nice reproductions, but prefer original even if not perfect. Canadian caps are superficially similar, but do not have the tall 'F' and sometimes have a little triangle below the 'Ford'. Note that there is no 'MADE IN USA'. My first time posting. I thing...
Last post
I agree with you Brian. Stay with it, you will find them. Even the correct common 1913 hubcaps are getting hard to find.
- 5 Replies
- 581 Views
-
Last post by Original Smith
Thu Apr 11, 2024 12:34 pm
-
-
15 touring FS
by
Nv Bob » Thu Apr 11, 2024 11:47 am
Posting here as I can't post in other section
15 touring good solid T no rust and wood solid runs great but after drive on and off the trailer will need bands and probly tubes and this be ready to enjoy
Has clear NV title in my name
Asking 7500 obo located Sparks Nv
Send an email for more pics
Bob
Jalopyt@yahoo.com
- 0 Replies
- 330 Views
-
Last post by Nv Bob
Thu Apr 11, 2024 11:47 am
-
-
WTB 19-20 ignition switch
Replies: 5
by
Model T Mark » Mon Mar 25, 2024 8:39 pm
First post
I’m looking for a really good or perhaps a new old stock ignition switch with the heavy cast light switch handle. We are struggling with broken pot metal parts. This is the last part needed to complete the restoration of a high point show car. It’s a Canadian export to Australia. Any help would be greatly appreciated. Thanks in advance. Mark...
Last post
I’ll take it apart and get some pictures. I knew there were several and the one I’m looking for is the one that has the large plate secured by two acres at the bottom that attaches it to the plate. Ours is so warped it doesn’t make good contact with the dim side. I have filed it flat and can’t do anything more to make it useful.
Mark ill pull...
- 5 Replies
- 433 Views
-
Last post by Karl Von Neumann
Thu Apr 11, 2024 10:19 am
-
-
Horn button fs
by
CTLeonard » Thu Apr 11, 2024 10:15 am
Will sell as a lot.one of them got a grinder mark. 40.00 for all three plus shipping. ctleonard64@gmail.com IMG_20240411_090907203.jpg IMG_20240411_090847231.jpg IMG_20240411_090830998.jpg
- 0 Replies
- 163 Views
-
Last post by CTLeonard
Thu Apr 11, 2024 10:15 am
-
-
26-27 front fender brace fs
by
CTLeonard » Thu Apr 11, 2024 9:20 am
One is getting pitted, both have been welded. One needs .more welding. 30.00 for the pair plus shipping. There's also pictured another good set that I don't know the year of. ctleonard64@gmail.com IMG_20240411_081312031.jpg IMG_20240411_081253169.jpg IMG_20240411_081233106.jpg IMG_20240411_081210005.jpg IMG_20240411_081159768.jpg
- 0 Replies
- 109 Views
-
Last post by CTLeonard
Thu Apr 11, 2024 9:20 am
-
-
1914 Coil Box (SOLD)
Replies: 5
by
ThreePedalTapDancer » Wed Mar 27, 2024 5:12 pm
First post
Nice clean late 1913-1914 slant cover coil box. Excellent working condition. Very straight. Nice gloss black paint,no damage, some very minor light scuffs here and there, nothing serious. Original switch and brass cover. Has newer wood and wiring. Original firewall mounting bolts. New latches, installed but fastening tabs not bent over yet....
Last post
Lucky buyer, it is so neat and clean.
- 5 Replies
- 707 Views
-
Last post by ClarenceWhite
Thu Apr 11, 2024 7:20 am
-
-
Stewart Speedometer Gear
by
BobP » Wed Apr 10, 2024 8:58 pm
For sale Stewart speedometer gears. Very good clean condition. Look at the pictures, the numbers are on them. $85 plus shipping. NO TEXTING. five07458677eight.
- 0 Replies
- 134 Views
-
Last post by BobP
Wed Apr 10, 2024 8:58 pm
-
-
For Sale: 1915 Runabout Tail Lamp Bracket
Replies: 2
by
Andrew Brand » Mon Apr 08, 2024 1:59 am
First post
A very nice original tail lamp bracket. This is the style with a separate bolt in license plate bracket that I believe was used only in 1915 on runabouts and possibly coupelets. Its in excellent condition. See photos. Price $95 includes air mail postage to the USA. Payment by Paypal (friends and family option).
DSC_3431.JPG
DSC_3430.JPG...
Last post
——————————————-
- 2 Replies
- 500 Views
-
Last post by JTT3
Wed Apr 10, 2024 5:34 pm
-
-
- 1 Replies
- 401 Views
-
Last post by bmklawt
Wed Apr 10, 2024 4:09 pm
-
-
Taillight brackets fs
Replies: 1
by
CTLeonard » Wed Apr 10, 2024 10:38 am
First post
Have a 15-19 roadster bracket. 2 15-22 touring brackets and on IMG_20240410_093142951.jpg IMG_20240410_093131822.jpg IMG_20240410_093124096.jpg e I don't know bracket. 25.00 each plus shipping.
Last post
Mike, I would like to buy the touring tail light bracket, marked , 20 touring & sedan , in picture. I sent you a email threw MTFCA
Kevin
- 1 Replies
- 206 Views
-
Last post by kmatt2
Wed Apr 10, 2024 3:29 pm
-
-
15-16 upper windshield frame with hinges fs
by
CTLeonard » Wed Apr 10, 2024 2:26 pm
At least I believe it's 15-16 . Measures 39 x10 hinges work nice. Has three glass channels. 125.00 plus shipping. ctleonard64@gmail.com IMG_20240410_132206313.jpg IMG_20240410_132145965.jpg IMG_20240410_132120734.jpg
- 0 Replies
- 104 Views
-
Last post by CTLeonard
Wed Apr 10, 2024 2:26 pm
-
-
14 windshield frame fs. Sold
by
CTLeonard » Wed Apr 10, 2024 2:15 pm
Overall, a nice operable frame. Slight pitting in certain areas, nothing terrible. Folds nicely as should. Missing one brass glass channel. 175.00 plus shipping. ctleonard64@gmail.com IMG_20240410_130939787.jpg IMG_20240410_130919058.jpg IMG_20240410_130759223.jpg IMG_20240410_131017814.jpg
- 0 Replies
- 175 Views
-
Last post by CTLeonard
Wed Apr 10, 2024 2:15 pm
-
-
- 2 Replies
- 223 Views
-
Last post by Model T Matt
Wed Apr 10, 2024 11:43 am
-
-
FS accessory vesta spot light
Replies: 4
by
Karl Von Neumann » Thu Feb 22, 2024 2:18 pm
First post
Vesta spot light and mount needs restoration great for a patina car switch works but is crusty. $65 plus the ride
Last post
Price drop 55 plus the ride
- 4 Replies
- 844 Views
-
Last post by Karl Von Neumann
Wed Apr 10, 2024 11:14 am
-
-
- 2 Replies
- 499 Views
-
Last post by Oldav8tor
Wed Apr 10, 2024 4:05 am
-
-
F.S. Brass Boyco Runningboard Can Set
by
Stephen1915 » Wed Apr 10, 2024 12:20 am
Here is a set of never used, older reproduction Boyco cans, made of Brass! Carrier is missing the top that holds the cans in place by the caps. Easily made to your liking. The cans look as though they must be soldered and pressure tested before using. These are hard to find and no longer reproduced.
$500 obo. +Shipping
CALL DON’T EMAIL...
- 0 Replies
- 364 Views
-
Last post by Stephen1915
Wed Apr 10, 2024 12:20 am
-
-
For Sale: Thomas Timer Elevator
Replies: 2
by
RajoRacer » Mon Apr 08, 2024 1:09 pm
First post
Here's a complete timer elevator available - spark rod is included just didn't make the photo deadline ! $250.00 includes Priority Mail in the U.S. Drop me a note through the Forum, please.
Last post
Found a new home - thanks MTFCA !
- 2 Replies
- 451 Views
-
Last post by RajoRacer
Tue Apr 09, 2024 10:07 pm
-
-
WTB - Juhasz carburetor
Replies: 2
by
blauvelt » Tue Apr 09, 2024 10:12 am
First post
Hoping to find a Juhasz carburetor, any size 1 1/2 and smaller would be ideal. Have a selection of Miller and Master carbs that could be used for trading. Thank you!
Last post
A side draft would be neat! Fix a few design considerations. Did they make one? Either would be fine, have to build an intake manifold either way. Thank you.
Side or updraft
- 2 Replies
- 411 Views
-
Last post by blauvelt
Tue Apr 09, 2024 2:20 pm
-
-
WTB 26-27 Steering gear case
Replies: 1
by
Tbird » Tue Apr 09, 2024 1:16 pm
First post
Looking for a 26-27 steering gear case. If you have the complete column that's fine too.
Thanks
Mike Bird
mikebird@lifeattheridge.net
Last post
I should have the gear case
- 1 Replies
- 185 Views
-
Last post by Karl Von Neumann
Tue Apr 09, 2024 2:07 pm
-
-
1911 Stewart speedometer road gear F/S
Replies: 1
by
Layden Butler » Fri Apr 05, 2024 3:14 pm
First post
Cast gear with block letter Stewart used in 1911, proper 60 teeth and 8 pitch, good teeth, does need straightening ( does not lay flat on the table). $95, domestic postage $10.
Last post
This is the original gear used on Model T Fords 1911 and 1912.
- 1 Replies
- 431 Views
-
Last post by Layden Butler
Tue Apr 09, 2024 12:04 pm
-
-
- 2 Replies
- 264 Views
-
Last post by JTT3
Tue Apr 09, 2024 9:39 am
-
-
Pending 1909 E&J Side Lamps Pat.1908 relisted
Replies: 6
by
fordrelic » Mon Feb 19, 2024 11:52 am
First post
For sale a pair of early E&J side lamps Pat. 1908
Used from 1909 to 1912.
Only pair I have ever found.
Condition is nice original with patina.
Price $400 plus shipping.
ej.jpg ej 2.jpg ej3.jpg ej4.jpg
Last post
to the top
- 6 Replies
- 852 Views
-
Last post by fordrelic
Tue Apr 09, 2024 8:14 am
-
-
Pending 17-22 Coupe deck lid
Replies: 3
by
fordrelic » Sat Mar 09, 2024 7:58 am
First post
For sale a deck lid for a 1917-22 coupe.
Good condition.
$150 plus shipping
deck lid.jpg deck lid 2.jpg
Last post
to the top
- 3 Replies
- 422 Views
-
Last post by fordrelic
Tue Apr 09, 2024 8:13 am
-
-
High low gear and spacer
Replies: 3
by
Ericgj85 » Mon Apr 08, 2024 1:35 pm
First post
I bought this set up from a member on here just to see how it works but have never used them. They are made for Closing up the ratio between low and high keeps the engine in its power band on the shift to high.Two parts are involved, a spacer and a driven gear with 29 teeth and flipping standard triple gears upside down . Along with this a new...
Last post
Sold second set
- 3 Replies
- 397 Views
-
Last post by Ericgj85
Mon Apr 08, 2024 10:21 pm
-
-
Rajo 4 valve copper head gasket
Replies: 5
by
Ericgj85 » Mon Apr 08, 2024 1:20 pm
First post
I have a brand new solid copper head gasket for Rajo 4 valve.
$75 plus shipping
Last post
I bought them off of the forum can’t remember who though it’s been a while .
- 5 Replies
- 374 Views
-
Last post by Ericgj85
Mon Apr 08, 2024 7:46 pm
-
-
WTB usable carpet for 22 Center door
by
colonelpowers » Mon Apr 08, 2024 4:17 pm
Just thought I would see if anyone might have an old carpet for a 22 Center Door. My old car has pretty presentable upholstery but the carpet has almost gone to dust so I just thought that I would check. It doesn't need to be particularly nice, just not falling apart.
- 0 Replies
- 144 Views
-
Last post by colonelpowers
Mon Apr 08, 2024 4:17 pm
-
-
Eisemann Mag.
Replies: 5
by
Model T Matt » Wed Mar 27, 2024 9:05 pm
First post
for sale type M4G6 Mag. found in Box Today asking $250.00 includes shipping call Matt 503-824-268one
Last post
Can someone let the cat out of the Bag and let us know what this mag is supposed to go onto ? -Curious Dusty
- 5 Replies
- 722 Views
-
Last post by DustySpokes
Mon Apr 08, 2024 3:45 pm
-
-
TT Closed Cab door check straps
Replies: 1
by
RajoRacer » Sun Apr 07, 2024 11:48 am
First post
I've had several closed cab rigs in the shop for odds & ends repairs and not one had door check straps so I had some done up using the remnants of one using similar webbing material & the length I kinda judged by the door position. These fit original & repro footman loops. I have a limited number of pairs and am asking $25.00 for a pair including...
Last post
BTT - all you closed cab folks have straps ????????
- 1 Replies
- 202 Views
-
Last post by RajoRacer
Mon Apr 08, 2024 1:06 pm
-
-
T-2838 Front Wheel Brg. Kit
Replies: 3
by
Model T Matt » Wed Apr 03, 2024 7:10 pm
First post
For sell Complete Front Wheel Brg. Kit for 1909-1927 Model Ts asking $250.00 shipped to your door step call Matt 503-82four-268one
Last post
held for kevin
- 3 Replies
- 578 Views
-
Last post by Model T Matt
Mon Apr 08, 2024 12:15 pm
-
-
T-body fs
by
CTLeonard » Mon Apr 08, 2024 11:11 am
I have a homemade touring body someone made up. Top and interior it would look pretty darn good. Firewall comes with it. Located in mt.vernon Indiana. Will entertain reasonable offers. Don't amuse me with nickel and dime stuff! ctleonard64@gmail.com IMG_20240408_100052958.jpg IMG_20240408_100037711.jpg IMG_20240408_100152697.jpg...
- 0 Replies
- 447 Views
-
Last post by CTLeonard
Mon Apr 08, 2024 11:11 am
-
-
Timing gauge SOLD
Replies: 4
by
Melba Nolan » Sat Sep 23, 2023 9:58 am
First post
For sale: Timing cover gauge with original box. $30 plus postage
20220723_065454.jpg 20220723_065508.jpg
Last post
sold pending payment
- 4 Replies
- 670 Views
-
Last post by Melba Nolan
Mon Apr 08, 2024 10:35 am
-
-
19-27 engine splash pan fs
by
CTLeonard » Mon Apr 08, 2024 10:17 am
Only have the one. Needs a little work to get smooth again. 25.00 plus shipping. ctleonard64@gmail.com IMG_20240408_091425175.jpg IMG_20240408_091409875.jpg IMG_20240408_091403692.jpg
- 0 Replies
- 211 Views
-
Last post by CTLeonard
Mon Apr 08, 2024 10:17 am
-
-
WTB front plate distributor
Replies: 11
by
38 coupe » Tue Mar 26, 2024 11:10 pm
First post
I am looking for a Bosch front plate. It does not have to have the original distributor. I would also consider an Atwater Kent plate.
Thank you,
Fred
Last post
Fred, the manual/automatic advance has to do with the head used. The non generator unit pictured has the advance operated by a cable from the dash. T units use a bell crank to the control rod. I believe Mark Chaffin still manufactures nice repo Bosch units at a reasonable price. As pointed out in earlier posts, replacement parts for the AK units...
- 11 Replies
- 742 Views
-
Last post by JvanMaanen
Mon Apr 08, 2024 10:07 am
-
-
frt. corner bracket
Replies: 6
by
Melba Nolan » Sat Oct 15, 2022 12:59 am
First post
For sale: front corner bracket passenger side. frame bracket near cross member $25 plus postage
20220811_100505.jpg 20220811_100518.jpg
Last post
move to top
- 6 Replies
- 1242 Views
-
Last post by Melba Nolan
Mon Apr 08, 2024 1:45 am
-
-
HCCT
Replies: 2
by
Melba Nolan » Mon Feb 05, 2024 11:21 pm
First post
For sale: a very good Allen Electric Co. tester. My Dad used it when he was rebuilding coils. Since he can no longer do that we are going to sell it.
$1500.00 with you picking up
email melbanolan@aol.com or text 314-575-7115 for pioctures
Last post
move to top
- 2 Replies
- 711 Views
-
Last post by Melba Nolan
Mon Apr 08, 2024 1:37 am
-
-
FS Macbeth round Healight Lenses
Replies: 6
by
TRDxB2 » Mon Jun 12, 2023 1:14 am
First post
I prefer PayPal to Family / Friends. Email me if interested with zip code to calculate shipping. Shipping extra
The 8-1/4 lens is flat, without the protruding hood and should fit stock headlight rim
NOT sure if I still an 8-5/8 is likely for the mysterious large headlight bucket. Fitment requires the early headlight rims that have a small clip...
Last post
bump..........
- 6 Replies
- 1493 Views
-
Last post by TRDxB2
Sun Apr 07, 2024 10:38 pm
-
-
Ford Puzzle
Replies: 3
by
Dan Hatch » Thu Apr 04, 2024 2:50 pm
First post
Here is an unusual Norman Rockwell/ Ford puzzle.
The painting these puzzles were made from were made for Ford 50 year anniversary. We all have seen the prints, they were given away to Ford dealers and the dealers gave them away.
They were also made into puzzles.
This one is Henry in his workshop building his first car.
This is also a round...
Last post
There are a couple similar puzzles on eBay. They are rectangular, about $30 including shipping. Look up Henry Ford Puzzle.
- 3 Replies
- 633 Views
-
Last post by Phoenix88R
Sun Apr 07, 2024 9:23 pm
-
-
High Speed Ring and Pinion
Replies: 2
by
Model T Matt » Wed Apr 03, 2024 7:01 pm
First post
For Sale T2518/24 HS high speed ring and pinion 39 tooth ring and 13 tooth pinion asking $400.00 shipped to your door step call Matt at 503-82four-268one
Last post
Held pending Payment
- 2 Replies
- 656 Views
-
Last post by Model T Matt
Sun Apr 07, 2024 8:06 pm
-
-
Group of Books
Replies: 3
by
Model T Matt » Mon Mar 25, 2024 7:42 pm
First post
For Sale a nice group of Model T Books asking $125.00 for the group shipped to your address-give me a call Matt at 503-82four-268one
Last post
Held For Richard
- 3 Replies
- 645 Views
-
Last post by Model T Matt
Sun Apr 07, 2024 7:34 pm
-
-
Bevin Bermuda Bell (SOLD)
by
ThreePedalTapDancer » Sun Apr 07, 2024 6:59 pm
Original Bevin Bermuda foot bell. This original Bevin bell is in original used condition. It is a take-off that was stored for a long time. It works nice, very loud DING DONG. No dents, just corrosion on screw plate and many road scratches and wear from being under a car for 100 years. Restore or use as is. 5.5 diameter. 200 shipped....
- 0 Replies
- 154 Views
-
Last post by ThreePedalTapDancer
Sun Apr 07, 2024 6:59 pm
-
-
Model T puzzle #2
Replies: 1
by
Dan Hatch » Sun Apr 07, 2024 4:47 pm
First post
Here is another Rockwell print puzzle. This one is “The Street was Never the Same Again.” It is also from the 50 year prints he did from Ford in1953. It had been opened and I am not sure if all there, but I think they are. You will know when you put it together. $20 + shipping. Email me at address in pictures. Thanks Dan
IMG_3570.jpeg...
Last post
I will buy that! Email sent.
- 1 Replies
- 227 Views
-
Last post by Grntea
Sun Apr 07, 2024 6:44 pm
-
-
FS: 16” Steering Wheel
Replies: 1
by
tselliott » Mon Apr 01, 2024 4:15 pm
First post
This wheel has been sanded and polished. Unfortunately it dropped and cracked, not into two pieces but completely through one area. The crack has been repaired with JB Weld Plastic Bonder and seems as strong as it was before. The spider was bead blasted and painted with epoxy enamel. Overall a decent wheel.
$65 OBO plus shipping.
Scott Elliott...
Last post
$45 OBO plus shipping
- 1 Replies
- 364 Views
-
Last post by tselliott
Sun Apr 07, 2024 3:57 pm
-
-
For sale misc parts
Replies: 4
by
Tim D » Tue Oct 10, 2023 12:21 pm
First post
Water pumps used unknown $20 each plus shipping.
Intakes cast iron used. Make an offer plus shipping.
Last post
Back to the top
- 4 Replies
- 996 Views
-
Last post by Tim D
Sun Apr 07, 2024 12:00 pm
-
-
WTB Iron water pump
Replies: 3
by
Bryce S. » Fri Oct 13, 2023 8:17 pm
First post
I am wanting to do away with the aluminum water pump on my T due to it constantly reacting with the iron block and causing that fun chemical reaction that ruins everything. Are there any good iron ones out there that would be a good replacement that one would consider selling me? And yes..... I know everyone thinks I should do it the way Henry...
Last post
Back to the top
- 3 Replies
- 415 Views
-
Last post by Tim D
Sun Apr 07, 2024 11:54 am
-
-
- 3 Replies
- 655 Views
-
Last post by Tim D
Sun Apr 07, 2024 11:54 am
-
-
Pick up only south central WI blocks and parts for sale
Replies: 2
by
Tim D » Tue Nov 14, 2023 3:11 pm
First post
Items for pick up only. A couple of 26 27 blocks one would be great for a ohv motor valve seats are Bad.
Blocks $150 each.
Complete rear end $40 locked up.
Axle half's $20 each.
Hogsheads $15 each.
High Heads $10 each.
Beloit Wisconsin
Last post
Back to the top
- 2 Replies
- 760 Views
-
Last post by Tim D
Sun Apr 07, 2024 11:53 am
-
-
- 3 Replies
- 456 Views
-
Last post by Tim D
Sun Apr 07, 2024 11:52 am
-
-
Chrome Mirrors
Replies: 3
by
Model T Matt » Wed Mar 27, 2024 8:00 pm
First post
For Sale pair of T-17700-C mirrors asking $80.00 for the pair call Matt 503-82four-268one
Last post
Held for George
- 3 Replies
- 397 Views
-
Last post by Model T Matt
Sun Apr 07, 2024 11:18 am
-
-
New items
Replies: 2
by
Melba Nolan » Sun Jan 21, 2024 10:25 pm
First post
For sale: New in package Emergency brake trim 1911-1918 heavy steel $7 plus postage
New in package Windshield rubber $3 plus postage
New in package Shell lacing with rivets $10 plus postage
New high head bolts $2.00 each plus postage I have 15 pieces
New in package hub bolts $2.75 each plus postage 6 x 2.75=$16.50
Drive shaft nuts $2.00 each I...
Last post
move to top
- 2 Replies
- 889 Views
-
Last post by Melba Nolan
Sat Apr 06, 2024 10:38 pm
-
-
motor mount new price
Replies: 3
by
Melba Nolan » Fri Dec 22, 2023 10:41 pm
First post
20230927_141524.jpg 20230927_141458.jpg 20230927_141439.jpg
For sale: Motor mount in very good condition $75 postage included
Last post
move to top
- 3 Replies
- 719 Views
-
Last post by Melba Nolan
Sat Apr 06, 2024 10:38 pm
-
-
lower steering column bracket
Replies: 4
by
Melba Nolan » Wed Nov 22, 2023 6:06 pm
First post
For sale: Lower steering column bracket. In good condition. $25 plus postage
20220806_200732.jpg
Last post
move to top
- 4 Replies
- 985 Views
-
Last post by Melba Nolan
Sat Apr 06, 2024 10:37 pm
-
-
locking foot pedal
Replies: 1
by
Melba Nolan » Mon Feb 05, 2024 8:32 pm
First post
for sale: locking foot pedal for exhaust whistle $10 plus postage
pictures........melbanolan@aol.com or 314-575-7115
Last post
move to top
- 1 Replies
- 595 Views
-
Last post by Melba Nolan
Sat Apr 06, 2024 10:36 pm
-
-
worm gear REDUCED PRICE
Replies: 4
by
Melba Nolan » Sat Dec 23, 2023 10:57 pm
First post
20221120_091937 (1).jpg 20221120_091947 (1).jpg
For sale: worm gear in good condition $150 plus postage
Last post
move to top
- 4 Replies
- 898 Views
-
Last post by Melba Nolan
Sat Apr 06, 2024 10:36 pm
-
-
windshield stanchions Reduced price
Replies: 6
by
Melba Nolan » Thu Nov 03, 2022 4:44 pm
First post
For Sale: very heavy metal stanchions. part #T7846 B with Ford script. $100 ea. plus postage
20221028_150840.jpg 20221028_150709.jpg 20221028_150739.jpg
Last post
move to top
- 6 Replies
- 1588 Views
-
Last post by Melba Nolan
Sat Apr 06, 2024 10:35 pm
-
-
FS 1926-26 Canadian Running boards
Replies: 3
by
EricMac » Mon Apr 01, 2024 8:16 pm
First post
I have a pair of 26-7 Canadian running boards. Both have some wear through so they would be best if you are either ambitious with a welder or if you install step plates. I prefer in person pickup but can box these up and mail them for actual shipping costs.
$150 USD plus shipping 20240401_200157.jpg 20240401_200059.jpg
Last post
Anybody interested at $100 for the pair?
- 3 Replies
- 356 Views
-
Last post by EricMac
Sat Apr 06, 2024 9:41 pm
-
-
FOR SALE - BULL DOG HAND PULL FROM THE DRIVERS SEAT CRANK STARTER
Replies: 3
by
Jay In Northern Ca. » Sat May 13, 2023 9:59 pm
First post
This is the main appliance for this pull from the dash hand start device. Spring tension keeps the return up and a brake fiction band on the pulley does the grabbing when you pull from the dash.Someone handy should be able to fabricate the missing pieces using the original instruction sheet schematic. Asking $85 plus postage. As a note the...
Last post
This item sold and no the pulley wheel was missing.
- 3 Replies
- 1197 Views
-
Last post by Jay In Northern Ca.
Sat Apr 06, 2024 4:11 pm
-
-
FS: More Jno. Brown 1913-1914 Side Lights for Parts
by
Rodger Erickson » Sat Apr 06, 2024 2:40 pm
FS: 3 John Brown side lights for parts. Two right side lights with busted glass, one has a steel top, the other has a mangled fount collar. The third light fits the driver side, it's a later one without a jewel but the top is still brass, I believe. Asking $15 each or $40 for the whole pile, shipping not included.
There's also two junk Brown...
- 0 Replies
- 305 Views
-
Last post by Rodger Erickson
Sat Apr 06, 2024 2:40 pm
-
-
For Sale: A GREAT Pair of c.1906-1911 Large Brass Sidelamps
Replies: 2
by
GGZ » Fri Mar 22, 2024 12:06 pm
First post
Here is a great pair of large brass sidelamps that are dated from c.1906 to 1911. These matching lights measure about 11 tall by 6 1/2 diameter of the lens rim. There is a small piece out of the bottom of one of the fonts. One of the burners is missing its knob. Otherwise, these are in good, original condition with very nice, original curved...
Last post
Still for sale.......
- 2 Replies
- 460 Views
-
Last post by GGZ
Sat Apr 06, 2024 12:22 pm
-
-
For Sale: 1911-1914 Brass Era Gray and Davis #115 Tail Lamp
Replies: 4
by
GGZ » Thu Jan 25, 2024 8:13 pm
First post
This Gray and Davis #115 tail lamp is about 9 1/2 tall and is probably from about 1911 to 1914. It is missing the clear side lens, which is easy to make. The body, chimney and font are brass. The door and top are steel. The red lens is in good condition as is the burner assembly. Overall, this is a good, old lamp that can be used for an original...
Last post
Still for sale......
- 4 Replies
- 808 Views
-
Last post by GGZ
Sat Apr 06, 2024 12:21 pm
-
-
Dodge bros. Spider fs. Sold
by
CTLeonard » Sat Apr 06, 2024 12:12 pm
Double keyed Dodge spider. 75.00 plus shipping. ctleonard64@gmail.com IMG_20240406_110952241.jpg IMG_20240406_110917566.jpg
- 0 Replies
- 377 Views
-
Last post by CTLeonard
Sat Apr 06, 2024 12:12 pm
-
-
Metal firewall fs
by
CTLeonard » Sat Apr 06, 2024 11:32 am
In really good shape. Has an extra hole for a switch. 100.00 plus shipping. ctleonard64@gmail.com IMG_20240406_101744021.jpg IMG_20240406_101718462.jpg
- 0 Replies
- 336 Views
-
Last post by CTLeonard
Sat Apr 06, 2024 11:32 am
-
-
For Sale Kingston carburetor
Replies: 4
by
dinosbunny » Thu Apr 04, 2024 10:48 am
First post
For Sale, Kingston carburetor. Completely dismantled and cleaned, new float seat and needle, new spray needle and painted with gas resistant paint. $130.00 includes shipped to your door in lower 48 states.
king1.jpg
king2.jpg
king3.jpg
king4.jpg
Last post
sold, pending payment, thank you
- 4 Replies
- 385 Views
-
Last post by dinosbunny
Sat Apr 06, 2024 10:37 am
-
-
Car rotisserie fs. Sold
Replies: 1
by
CTLeonard » Sat Apr 06, 2024 10:14 am
First post
Auto twirler pro rotisserie. Purchased years ago and used once by a buddy. Paid 2700.00 but will let go for 1250.00. Too large to ship, will need picked up in mt.vernon Indiana. Has two jigs made for 30-31 model A truck and coupe. ctleonard64@gmail.com IMG_20240406_090618614.jpg IMG_20240406_090646970.jpg IMG_20240406_090546693.jpg...
Last post
That’s a super deal!!!
- 1 Replies
- 463 Views
-
Last post by JTT3
Sat Apr 06, 2024 10:34 am
-
-
For Sale: Klaxonet Electric Horn
Replies: 4
by
Ed Fuller » Sat Mar 02, 2024 8:14 pm
First post
This is a neat Electric Klaxonet horn. Just like a hand operated but electric driven. I hit it real quick with 12 volts and it works. Very loud! The bell looks like it was nickel plated but some has worn off. Appears to be brass underneath.
$100 plus shipping in the U.S.
IMG_3660.jpeg
IMG_3662.jpeg
IMG_3661.jpeg
IMG_3664.jpeg
Last post
If it is 6 volt, I will take it. I will send you an email.
- 4 Replies
- 653 Views
-
Last post by Reno Speedster
Sat Apr 06, 2024 1:59 am
-
-
*SOLD* Original 1911 or 1912 Brass Radiator
Replies: 2
by
NealW » Fri Apr 05, 2024 4:37 pm
First post
I am selling an original late 1911 or 1912 radiator removed from our late 1911 touring car. It does not have rivets on neck, nor the gas tube on the back side of the radiator, so that appears to date it to late 1911 or early 1912.
The brass shell is in really good shape. The radiator does not leak. From the records that came with the car, it...
Last post
Somebody got a deal!
- 2 Replies
- 506 Views
-
Last post by 1925 Touring
Fri Apr 05, 2024 10:08 pm
-
-
FS: bells and whistles for your T
Replies: 5
by
Nate22huckster » Mon Mar 04, 2024 8:21 pm
First post
For sale: bells and whistles, literally! I had these listed separately but having too many separate posts became confusing so here they are on one posting. Take your pick $150 each plus shipping.
Item 1: Bevin brothers Bermuda bell. Nickel plated, mounts on the underside of the floor board and can be either foot or hand operated. When you press...
Last post
All items are sold
- 5 Replies
- 1006 Views
-
Last post by Nate22huckster
Fri Apr 05, 2024 7:40 pm
-
-
FS: Bevin Bros Bermuda Bell *new price*
Replies: 3
by
Nate22huckster » Sun Feb 25, 2024 9:37 am
First post
For sale: Bevin Bros. bell, nickel plated. Attaches to your floor board and is foot operated and produces a loud and clear “ding-dong!” Fun accessory for your T. Send me a PM and I can email or text you a video of it in action. $250 plus shipping.
202FD5CC-7E45-49DF-8437-D7E20D7343C7.jpeg
A375425C-D10E-4A1B-AA63-3002A72E69D7.jpeg...
Last post
Bell is sold
- 3 Replies
- 714 Views
-
Last post by Nate22huckster
Fri Apr 05, 2024 7:39 pm
-
-
SOLD: Early Brass and Nickel CM Hall Model 5 "Helmet" Tail Light
by
GGZ » Fri Apr 05, 2024 4:20 pm
SOLD
Here is a very nice, original CM Hall Detroit Model 5 brass and nickel helmet tail light. It measures about 5 1/2 by 5 1/2 by 5 1/2 . This is an electric tail light that would be mounted on a spade bracket. It is in really nice condition with two good lenses (red ribbed and clear), reflector, rim thumbnut, socket, etc. I would date this from...
- 0 Replies
- 337 Views
-
Last post by GGZ
Fri Apr 05, 2024 4:20 pm
-
-
Fuel Gauge
Replies: 3
by
Model T Matt » Wed Apr 03, 2024 7:14 pm
First post
Neat NOS Fuel Gauge by AMERICAN GAUGE CO. new in the box has brochure missing fuel line from tank to sender- a neat item to install on ones car asking $120.00 shipped to your door step call Matt 503-82four-268one
Last post
held for Steve
- 3 Replies
- 594 Views
-
Last post by Model T Matt
Fri Apr 05, 2024 3:58 pm
-
-
17-22 windshield fs
Replies: 5
by
CTLeonard » Thu Oct 12, 2023 1:17 pm
First post
Nice straight frame including brass glass channel and glass clamps. One of the threads for the stanchions Is split. 200.00 plus shipping. NOW 140.00 plus shipping ctleonard64@gmail.com 16971308328959099168978296654755.jpg 16971308737923748415233730130701.jpg 16971309012998062525251750384297.jpg 16971309245036617995413667290279.jpg...
Last post
Lower price of 140.00 plus shipping
- 5 Replies
- 714 Views
-
Last post by CTLeonard
Fri Apr 05, 2024 3:46 pm
-
-
Pull start for a Model T
Replies: 19
by
DavidGMeier » Tue Jan 17, 2023 1:27 am
First post
WTB - does anyone have a Pull start for a Model T?
Last post
Not yet but I will.
Thanks
- 19 Replies
- 2681 Views
-
Last post by DavidGMeier
Fri Apr 05, 2024 3:33 pm
-
-
WTB machined front hub for speedo
Replies: 2
by
mklooksup » Thu Apr 04, 2024 7:04 pm
First post
I'm looking for a machined front hub to accommodate a speedometer gear for my McLaren wire wheels.
If someone has one available to sell please let me know.
Thanks
Manny Kourounis
Last post
I have some hubs for a speedometer gear, sent you an email , Larry Debaugh
- 2 Replies
- 341 Views
-
Last post by Larry Debaugh
Fri Apr 05, 2024 9:22 am
-
-
WTB Steering Column for 1912
Replies: 24
by Distagon2 » Tue Apr 02, 2024 12:06 pm
First post
Looking for a 1912 Steering Column, preferably complete in restored or decent restorable condition. Contact me at eight zero three, two two six, six four three two. Or email at Distagon2 at aol dot com.
Last post
Hi Greg:
If you intend to drive this car, the later 5:1 steering is recommended. A 26/27 complete column is inexpensive, where this provides you with the 5:1 gears and the upper steering shaft parts. Any non 26/27 lower shaft is easily attached first with all thread, then welded and ground to the cleanup diameter.
Once retrofitted, this safety...
- 24 Replies
- 913 Views
-
Last post by Scott Rosenthal
Fri Apr 05, 2024 8:18 am
-
-
WTB - Closed car window opening/lowering straps
Replies: 2
by
Walt Wise » Mon Apr 01, 2024 8:54 am
First post
Hoping someone has some old original straps that they would part with, preferably light brown. Maybe, if you did a complete restoration on your car, you might have these still laying around? Let me know what you have and some pics Please. Send me an email or PM through this site. Much Thanks!!! Walt Wise
Last post
Still looking!!!
- 2 Replies
- 288 Views
-
Last post by Walt Wise
Fri Apr 05, 2024 6:23 am
-
-
FS: Early Cast-or Forged- Steering Wheel Spiders
Replies: 2
by
George House » Fri Mar 29, 2024 4:45 pm
First post
Sandblasted and powdercoated glossy black. All 4 ‘arms’ rest evenly on flat surface. Top steering wheel spider has 2 internal keyways opposite each other. Only $75 each + USPS small flat rate box for either or both. 12.5”+- center to center opposite ‘arms’
gwhouse731(at)gmail(dot)com
Last post
Will sacrifice the powdercoated steering wheel spiders for $75 each and 3rd one for $55….
- 2 Replies
- 523 Views
-
Last post by George House
Fri Apr 05, 2024 5:43 am
-
-
- 0 Replies
- 317 Views
-
Last post by DavidGMeier
Fri Apr 05, 2024 1:36 am
-
-
1909-1925 Hall Scott Shifter
Replies: 3
by
Model T Matt » Wed Mar 27, 2024 7:47 pm
First post
Have rebuilt Hall Scott Shifter fits 1909-1925-asking $250.00 includes shipping call Matt 503-82four-268one
Last post
fits a Ruckstell 2 spd rear axle used for shifting slide gear- this has been sold Thanks
- 3 Replies
- 661 Views
-
Last post by Model T Matt
Thu Apr 04, 2024 10:44 pm
-
-
Top Saddle.
Replies: 2
by
RustyFords » Wed Apr 03, 2024 8:05 pm
First post
Looking for a top saddle for my 24 Touring. One of mine fell off during a drive.
My car is an old patina car, so I’m looking for an old not perfect part…not a new shiny one.
Text me at 281-seven eight seven-8418 or email at rustyfordsATgmail.com
Thanks
Don
Last post
Thanks. :) :)
- 2 Replies
- 392 Views
-
Last post by RustyFords
Thu Apr 04, 2024 8:28 pm
-
-
- 0 Replies
- 363 Views
-
Last post by Layden Butler
Thu Apr 04, 2024 7:24 pm
-
-
FS. Nice original 1912/1913set of brass hood latches
Replies: 1
by
Larry » Thu Apr 04, 2024 3:18 pm
First post
Unusual set of brass hood latches that came off a late 1912 early 1913 touring car. These latches are the double ear solid brass latches. Some will argue that they only produced the single ear brass in 1912 and switched to the steel double ear in 1913 but these were the original Latches on the car and they are not reproductions.
Price $100 +...
Last post
Sold,
Thank You,
Larry
- 1 Replies
- 337 Views
-
Last post by Larry
Thu Apr 04, 2024 4:42 pm
-
-
How to Unstrangle your Kingston L-4... The New Kingston Super Valve - SOLD OUT
Replies: 2
by
Scott_Conger » Wed Mar 29, 2023 3:39 pm
First post
A number of folks who expressed an interest in these have failed to follow through, so I am left with a few spares that I did not anticipate having. Contact me through email if you are interested in owning one. There is not an unlimited supply and I am still conflicted as to the real need/demand for these things, so please understand that it is...
Last post
Hi interested in your super valve Any left if so how much? Thanks Jeff Arizonia 775-427-7979 lockwoodeljeff@gmail.com
- 2 Replies
- 716 Views
-
Last post by lochiel
Thu Apr 04, 2024 3:01 pm
-
-
Oil Can and Mount.
Replies: 1
by
RustyFords » Wed Apr 03, 2024 8:03 pm
First post
I’m looking for a firewall mounted oil can and the associated mount for my 24 Touring. My car is old patina car so I’m looking for an old, yet serviceable part. Not a new shiny one.
Text me at 281-seven eight seven-8418 or email me at rustyfordsATgmail.com
Thanks
Don
Last post
I have one on the way.
Thanks Larry.
- 1 Replies
- 507 Views
-
Last post by RustyFords
Thu Apr 04, 2024 1:37 pm
-
-
Brass Era Accessory Dash Clock
Replies: 1
by
Larry » Thu Apr 04, 2024 12:05 pm
First post
This is a beautiful original brass Dash clock made by the New Haven clock company, New Haven, Connecticut. The original porcelain face is in beautiful original condition, as is the brass case. The case measures 4 inches in diameter and is sloped at an angle to face the driver when mounted. The mechanism will need serviced, comes with key.
Price...
Last post
Sold
Thank You,
Larry
- 1 Replies
- 332 Views
-
Last post by Larry
Thu Apr 04, 2024 12:53 pm
-
-
- 0 Replies
- 404 Views
-
Last post by milkmanfishn
Thu Apr 04, 2024 11:00 am
-
-
New batch of Stevens insert ready FS
Replies: 65
by
Dan Hatch » Thu Jun 15, 2023 4:37 pm
First post
Just finished a new run of Upper and Lower Stevens Front Axle Inserts. Sorry, but yes there is a price increase.
Upper Tapered Inserts $4.25 each
Lower Threaded Inserts $6.25 each
All + shipping. Email me at address in the pictures. Thanks Dan
IMG_2391.jpeg
IMG_0598.jpeg
IMG_0260.jpeg
Last post
Back to the top
- 65 Replies
- 4540 Views
-
Last post by Dan Hatch
Thu Apr 04, 2024 10:55 am
-
-
FS MODIFIED ENGINE (SOLD)
Replies: 5
by
Mark Chaffin » Thu Mar 07, 2024 4:41 pm
First post
This engine (August 1926) came out of a recent estate sale. It has new babbit mains and rods. Chevy crank conversion with larger rods. Reground camshaft. Unknown grind. .040 aluminum pistons. Valves were also replaced. Comes with rebuilt transmission, hogshead and a four dip pan. Been sitting for many years and dirty. Will require complete...
Last post
Sold to Scott.
- 5 Replies
- 1091 Views
-
Last post by Mark Chaffin
Thu Apr 04, 2024 10:44 am
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum