Classifieds - Parts - Page 95

Classifieds - Parts

New Topic

19843 topics

Page 95 of 199
- Jump to page:
Previous
1
…
93
94
95
96
97
…
199
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by love1913 « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

45154 Views

Last post by love1913
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

1911 Gas Tanks

Last post by Larry Debaugh « Thu Sep 23, 2021 9:20 pm
Replies: 1
by Larry Debaugh » Tue Sep 21, 2021 9:04 pm

First post

2 Available
Clean on the inside
$200 each plus shipping
Can bring to Hershey

Last post

Lighter color tank is sold, other still available, larry

1 Replies

1116 Views

Last post by Larry Debaugh
Thu Sep 23, 2021 9:20 pm
1916-19 Engine Rebuilt

Last post by skeiss « Thu Sep 23, 2021 9:14 pm
Replies: 4
by skeiss » Thu Sep 23, 2021 4:35 pm

First post

FOR SALE
Nicely rebuilt 1916-1919 vintage Model T engine and transmission. .040 over aluminum pistons, new babbit on rods and mains, transmission drums and bands in excellent condition. Starts and runs well. Non-generator set up with starter. This engine was rebuilt as a faux 1913 engine as the serial number and casting date were altered. Has an...

Last post

The engine has been sold pending payment and pickup.
Thank you Perry and MTFCA!

4 Replies

1291 Views

Last post by skeiss
Thu Sep 23, 2021 9:14 pm
Oil Pressure Gauge

Last post by Tbird « Thu Sep 23, 2021 8:04 pm
Replies: 2
by Tbird » Mon Sep 13, 2021 4:50 pm

First post

This is a new Actron G 105 Electrical Oil pressure gauge still in its packaging
$10 plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_9444.JPG

IMG_9443.JPG

Last post

$5 plus shipping

2 Replies

1184 Views

Last post by Tbird
Thu Sep 23, 2021 8:04 pm
1917 1925 Roadster REAR FENDER IRON PASSENGER SIDE

Last post by rstamand « Thu Sep 23, 2021 7:34 pm

by rstamand » Thu Sep 23, 2021 7:34 pm

Looking to purchase a passenger side rear fender iron for 17-25 roadster. If you have one you can part with please email: rstamand@charter.net

0 Replies

587 Views

Last post by rstamand
Thu Sep 23, 2021 7:34 pm
WTB Spare Tire Carrier for 1919 Roadster - Side Mount

Last post by Don D « Thu Sep 23, 2021 7:30 pm
Replies: 4
by Don D » Wed Sep 22, 2021 11:26 am

First post

Looking for Spare Tire Carrier that is mounted to the driver side running board and top arm bracket for a 1919 Roadster.

Last post

Dennis,

Thanks for the humor however I prefer one that I do NOT have to feed, clean up after and sing to sleep. :-)

The hunt continues!!

Have a great day,
Dom

4 Replies

1167 Views

Last post by Don D
Thu Sep 23, 2021 7:30 pm
More Stromberg adjuster wells available

Last post by Scott_Conger « Thu Sep 23, 2021 5:14 pm

by Scott_Conger » Thu Sep 23, 2021 5:14 pm

While I wait for some metric taps to arrive, I decided to make some more wells today, just to satisfy a couple folks who missed out on my last batch, and to fill up my inventory so that I can box up the tooling for awhile.

As always, I will most certainly respond to EMAIL , not PMs

thanks

IMG_20210912_124519005.png...

0 Replies

654 Views

Last post by Scott_Conger
Thu Sep 23, 2021 5:14 pm
SOLD: 4 Champion Brass Top Spark Plug Insulators/Cores and 1 Priming Cup Spark Plug

Last post by GGZ « Thu Sep 23, 2021 3:32 pm

by GGZ » Thu Sep 23, 2021 3:32 pm

SOLD SOLD SOLD!

Here are four, Champion brass top spark plug insulators. Two are in their original boxes which have 1919 patents dates. They look NOS or hardly used, but I am not positive. Also included is one priming cup spark plug that is in very nice condition.

The price for the group is 125.00 INCLUDING shipping within the USA. Take a look...

0 Replies

704 Views

Last post by GGZ
Thu Sep 23, 2021 3:32 pm
Model T Frame

Last post by T Cruiser « Thu Sep 23, 2021 1:43 pm
Replies: 1
by T Cruiser » Fri Aug 27, 2021 12:19 am

First post

9-12 Sandblasted and primed; some pitting on inside of one rail. $750.00
Picked up, or free delivery to Tulare Swap Meet.

Ted at 503-728-3476.

Last post

Frame has been sold. Thanks, Ted

1 Replies

1278 Views

Last post by T Cruiser
Thu Sep 23, 2021 1:43 pm
Wanted to Buy

Last post by TRDxB2 « Thu Sep 23, 2021 11:43 am
Replies: 3
by Mike Lebsack-Iowa » Wed Sep 22, 2021 12:54 pm

First post

Is there a front wheel Timken-bearing race puller made for Model T wheels and if so does anyone have one for sale? I find myself having an ever increasing need for one. Please let me know and much appreciated. Mike 319-fourthirty, 49 ninety five.

Last post

Found this trick don't know if it will work for your needs
By Kenny Edmondson, Indy on Thursday, March 03, 2011 - 07:42 pm:
I figured I'd let everyone in on a way to easily remove the small outer wheel bearing races on the pre 26/27 hubs. The jaws in the current set up won't fit in the later hubs.
I've been using this procedure for awhile. This...

3 Replies

1361 Views

Last post by TRDxB2
Thu Sep 23, 2021 11:43 am
SOLD demountable rims and wheels ($800)

Last post by Howard,Dayton « Thu Sep 23, 2021 9:22 am
Replies: 4
by Howard,Dayton » Sat Sep 18, 2021 6:05 pm

First post

FS, front and rear wheels - perlman ( aftermarket wheel manufacturer?) Very nice shape, Will pack on pallet free- u pay freight.

Last post

,,,,SOLD,,,

4 Replies

1508 Views

Last post by Howard,Dayton
Thu Sep 23, 2021 9:22 am
26/27 Switch Panels SOLD PP

Last post by Dan Hatch « Thu Sep 23, 2021 5:53 am
Replies: 5
by Dan Hatch » Sun Sep 12, 2021 2:19 pm

First post

Here are some switch panels. Two are 26/27, one is square panel that someone installed a small repro amp meter in. All for ONE money. $49.00 + shipping. Email me at address in pictures. Thanks Dan
9B1985C4-DEB0-4A8B-A091-0A938B095216.jpeg
C19F1B77-7F11-4E7F-9FA5-85EDFBE93749.jpeg
D83AC693-A909-4A36-B185-CAFAC5A61251.jpeg

Last post

Back to the top

5 Replies

1586 Views

Last post by Dan Hatch
Thu Sep 23, 2021 5:53 am
Hays 30x3-1/2 demountable rim

Last post by Allan « Thu Sep 23, 2021 4:21 am
Replies: 1
by tselliott » Tue Sep 21, 2021 2:47 pm

First post

This Rim is in decent shape with no sharp edges.
$40 plus shipping.
Scott Elliott
971-5O6-94O2

Last post

That's the one someone was advertising to buy on Sept 19 on this forum.

Allan from down under.

1 Replies

966 Views

Last post by Allan
Thu Sep 23, 2021 4:21 am
Looking for a wood bed for your roadster??

Last post by Allan « Thu Sep 23, 2021 4:15 am
Replies: 2
by Angmar » Tue Sep 21, 2021 2:02 pm

First post

I saw this on Epay,

I know there are some looking so I wanted to pass it along. No connection.

Last post

It makes it even harder when you do not have the option to make an offer. My guess is it will not sell at $500, but how do you keep track of it? I would not like to try to replicate all the ironwork for the asking price, but it does seem high when the timberwork needs a total replacement.

Allan from down under.

2 Replies

1380 Views

Last post by Allan
Thu Sep 23, 2021 4:15 am
For Sale:Pennsylvania license plates (1924,1931,1933,1934,1935,1937)

Last post by roystoy57 « Thu Sep 23, 2021 1:25 am

by roystoy57 » Thu Sep 23, 2021 1:25 am

Pennsylvania license plates:
1924 $30.00
1931 $40.00
1933 $ 30.00
1934 $ 30.00
1935 $ 40.00
1937 $ 30.00
Plus shipping or can deliver to Hershey C8490ECD-85D5-495A-8CB1-0CF1540E7076.jpeg

0 Replies

674 Views

Last post by roystoy57
Thu Sep 23, 2021 1:25 am
For Sale: Rebuilt Mag Coil Ring

Last post by R.V.Anderson « Wed Sep 22, 2021 8:58 pm
Replies: 4
by John Haynes » Sun Sep 19, 2021 7:55 pm

First post

For Sale is a Rebuilt Mag Coil Ring for a car with a starter for 1919-1927. This was rebuilt by Wally Szumouski. I bought this for a project motor and never used. No core required, buy outright for #200.00 plus shipping. Please send an email to me if you would like photos or have any questions.

Last post

Not trying to hijack this thread, but the difference between the US and Canadian units of the same vintage is that the Canadian pole faces are noticeably shorter than on the US castings.

4 Replies

1514 Views

Last post by R.V.Anderson
Wed Sep 22, 2021 8:58 pm
Single front fender bracket

Last post by Philip Lawrence « Wed Sep 22, 2021 5:45 pm

by Philip Lawrence » Wed Sep 22, 2021 5:45 pm

Here is a rusty and pitted 1919 - 1925 single front fender bracket with mounting hardware $10.00 plus shipping

0 Replies

626 Views

Last post by Philip Lawrence
Wed Sep 22, 2021 5:45 pm
Bud Vases Clear w/brackets

Last post by Horton « Wed Sep 22, 2021 3:49 pm
Replies: 1
by 25tfire » Mon Sep 20, 2021 4:10 pm

First post

Nice set of Bud Vases, clear in color with etching and brackets for mounting. Pictures available on request. $125 plus shipping.

Last post

I am interested in the bud vases. Do you have both mounting brackets? Are there any chips in the glass? Can you send a picture of them to bhb4u@roadrunner.com. Thank you, Bill

1 Replies

897 Views

Last post by Horton
Wed Sep 22, 2021 3:49 pm
Rands Windshield Hinges SOLD

Last post by T Cruiser « Wed Sep 22, 2021 3:22 pm
Replies: 1
by Tbird » Wed Sep 22, 2021 9:23 am

First post

:x I have 1 complete set of repop brass Rands Type Hinges and 1 original half set of Rands Hinges
$40 plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_9503.JPG

IMG_9504.JPG

IMG_9505.JPG

IMG_9506.JPG

Last post

I will take the hinges. Call me @503 -728-3476 Ted

1 Replies

734 Views

Last post by T Cruiser
Wed Sep 22, 2021 3:22 pm
SOLD N.O.S. Rear crossmember 1914-25

Last post by FATMAN « Wed Sep 22, 2021 2:06 pm
Replies: 1
by FATMAN » Fri Sep 17, 2021 11:47 am

First post

Here is a N.O.S. rear crossmember for 1914-25
not pitted, will paint up great, hard to find 125.00 plus postage, 815-633-7244
modelt2001@comcast.net
no p.m.'s please
SOLD

Last post

Back to the top going to t bay soon

1 Replies

856 Views

Last post by FATMAN
Wed Sep 22, 2021 2:06 pm
#1 Model T Keyboard WITH KEYS new price, $150 ppd

Last post by Dropacent « Wed Sep 22, 2021 1:16 pm
Replies: 8
by Dropacent » Thu Feb 18, 2021 1:23 pm

First post

UPDATE. Lowered price! STILL AVAILABLE, BUT WITH A VERY LIMITED NUMBER OF FORD SCRIPT KEYS STILL AVAILABLE. THATS $150 FOR JUST THE BOARD OR $300. INCLUDES ONE SET OF NORS KEYS. Tmorsher@icloud.com. Fresh batch available now, WITH AN ADDED OPTION ! . We got into a nice stash of NORS numbered ford keys, and can now offer our boards WITH or WITHOUT...

Last post

New lowered price, $150 ppd

8 Replies

3636 Views

Last post by Dropacent
Wed Sep 22, 2021 1:16 pm
Misc Tools- SOLD

Last post by Tbird « Wed Sep 22, 2021 9:31 am

by Tbird » Wed Sep 22, 2021 9:31 am

I have here some assortment of tools. Two valve lifters, and some wrenches. Three of the wrenches are marked Ford
$20 for all plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_9507.JPG

IMG_9508.JPG

IMG_9509.JPG

IMG_9510.JPG

0 Replies

751 Views

Last post by Tbird
Wed Sep 22, 2021 9:31 am
For Sale: 1913 Heinze Coil Box and Four (4) Coils

Last post by ModelTMark « Tue Sep 21, 2021 11:14 pm

by ModelTMark » Tue Sep 21, 2021 11:14 pm

For Sale: 1913 Heinze coil box and four Heinze coils. The box is in very good shape except one splinter under one of the latches (see picture). I have the original latches, though only one shown in the picture. The coils are in excellent shape. Asking $700, but I have some room on the price. A set of four new Heinze coils cost over $800 or best...

0 Replies

931 Views

Last post by ModelTMark
Tue Sep 21, 2021 11:14 pm
Excellent axle shaft with NOS gears.

Last post by Art M « Tue Sep 21, 2021 8:46 pm
Replies: 2
by Dropacent » Tue Aug 17, 2021 6:56 pm

First post

Offered is a very nice original axle shaft. Going with are 2 axle gears. These are made from the very rare unobtanium metal. One gear is NOS , the second is NOS dimension but has a chip in the middle of a tooth. I don’t think a problem, but I’m throwing it in for free, anyway! So, I think we go with $135 delivered to your door. If you disagree ,...

Last post

The axle shaft should last a long time. Nice looking
Art Mirtes

2 Replies

1200 Views

Last post by Art M
Tue Sep 21, 2021 8:46 pm
REBUILDING THE FORD POWER PLANT by VIC ZANNIS SOLD

Last post by henryford2 « Tue Sep 21, 2021 8:33 pm
Replies: 2
by henryford2 » Tue Sep 21, 2021 3:34 pm

First post

80 illustrations. Engine and transmission rebuilding. Tips on modern parts and modifications. Build your own pouring and line boring equipment, plans and measurements included. Spiral bound, soft cover, 75 pages. New book no tears, rips, smudges or writing. $30.00 price includes shipping and NO sales tax. Please respond to this email...

Last post

Rich it's yours

2 Replies

1026 Views

Last post by henryford2
Tue Sep 21, 2021 8:33 pm
NH Full Flow Float Valves - Available this week

Last post by CudaMan « Tue Sep 21, 2021 7:43 pm
Replies: 8
by Scott_Conger » Sat Jan 26, 2019 4:23 pm

First post

Ask now, as I am 1/2 way through a batch and they don't last long

$25 each, and $7 postage
That is Priority Mail, with tracking.

You may contact me at: Model T Repair at gmail dot com (all one word, of course...). Email works much better for this than PM system does, so PLEASE contact me directly via email .

Thank you.

Full Flow Float Valves...

Last post

I wonder if Kingston L4s would benefit from a similar valve?

8 Replies

4160 Views

Last post by CudaMan
Tue Sep 21, 2021 7:43 pm
Sold! 3-21” Roller tires, make me an offer

Last post by Ruxstel24 « Tue Sep 21, 2021 6:44 pm
Replies: 4
by Ruxstel24 » Wed Sep 15, 2021 5:00 pm

First post

I have 3-4.40/4.50 21” tires good for a roller...
2 have decent tread, but I would not trust them on the road. I will have to get a price to ship, but I’m asking $30 each plus shipping.
Please contact via email at hpautorepairdd at Gmail dot com

Last post

Are tires sill for sale?

No sir, deal was made a little while ago.

4 Replies

1480 Views

Last post by Ruxstel24
Tue Sep 21, 2021 6:44 pm
FS- 1926 Coupe Fenders, Aprons, and Running Boards

Last post by ITDave « Tue Sep 21, 2021 4:37 pm
Replies: 3
by msaggese » Thu Dec 03, 2020 3:40 pm

First post

Selling a set of original steel 1926 Coupe fenders, running boards, aprons, and running board brackets
These came off a car built in November of 1925.

These are in somewhat rough shape, early restoration in the 1960's uhsed some brazing to fix typical crack spots.
I am including some original patch panels cut from other fenders which should be...

Last post

Are they still available? I'll pick them up tomorrow.

3 Replies

1685 Views

Last post by ITDave
Tue Sep 21, 2021 4:37 pm
FOR SALE*** TT STAKE BED STAKE NOS**Make offer forget my price.

Last post by Jack Putnam, in Ohio « Tue Sep 21, 2021 3:16 pm
Replies: 1
by Jack Putnam, in Ohio » Sun Sep 19, 2021 5:15 pm

First post

One only NOS stake for TT stake bed. If you are. one short for your truck, now is your chance to complete a set. $?? plus $30 for great USPSP priorty service of oversized package . Somebody can use this, Make offer.
419-3ZERO SIX-39SIX SIX

Last post

On Sale, name your price.

1 Replies

1046 Views

Last post by Jack Putnam, in Ohio
Tue Sep 21, 2021 3:16 pm
21 inch Split Rim

Last post by tselliott « Tue Sep 21, 2021 2:39 pm

by tselliott » Tue Sep 21, 2021 2:39 pm

This rim does not have the hardware that locks it in place.
Needs work to make it useable.
Make offer and I can check shipping costs.
Scott Elliott
971-5O6-94O2

0 Replies

795 Views

Last post by tselliott
Tue Sep 21, 2021 2:39 pm
Turner timer fs

Last post by CTLeonard « Tue Sep 21, 2021 2:05 pm

by CTLeonard » Tue Sep 21, 2021 2:05 pm

Turner 2in1 timer model h. 30.00 plus shipping IMG_20210921_130223596.jpg IMG_20210921_130215208.jpg IMG_20210921_130210527.jpg

0 Replies

740 Views

Last post by CTLeonard
Tue Sep 21, 2021 2:05 pm
Stewart speedometer drive fs

Last post by CTLeonard « Tue Sep 21, 2021 1:26 pm

by CTLeonard » Tue Sep 21, 2021 1:26 pm

Spins freely; has 1913 n-4 stamped. 250.00 plus shipping IMG_20210921_122230217_HDR.jpg IMG_20210921_122215996.jpg IMG_20210921_122151167.jpg IMG_20210921_122239347.jpg

0 Replies

678 Views

Last post by CTLeonard
Tue Sep 21, 2021 1:26 pm
WTB generator cutout

Last post by Ruxstel24 « Tue Sep 21, 2021 12:04 pm
Replies: 2
by Rod Petrie » Tue Sep 21, 2021 11:12 am

First post

WTB generator cutout. I know these are hard to come by but does someone have a spare or can tell me where I might find one.

Last post

I have a drawer full of used ones....
hpautorepairdd at Gmail dot com
Dave

2 Replies

903 Views

Last post by Ruxstel24
Tue Sep 21, 2021 12:04 pm
Front end steering device ACCESSORY for sale

Last post by Dropacent « Tue Sep 21, 2021 10:48 am
Replies: 4
by Dropacent » Fri Sep 10, 2021 9:19 pm

First post

Ballcrank Co., Cincinnati Ohio put this nifty device out in the model t days. Clamps to front axle and provides shock relief to the steering process, and probably helped return the wheels to straight. Ever have a steering wheel whip from your hands? Ballcrank said, NO WAY! NOT WITH THIS! Very well made, proudly stamped with their name and decal....

Last post

Sale pending depending on cost of overseas shipment. I’ll let you know if still available, Rich. Thanks!

4 Replies

1745 Views

Last post by Dropacent
Tue Sep 21, 2021 10:48 am
WTB brass windshield support rod ends

Last post by DaveB « Tue Sep 21, 2021 10:45 am
Replies: 1
by KimDobbins » Mon Sep 20, 2021 8:43 pm

First post

I’m looking for 10 brass ends for 1911-12 windshield support rods. I hoping someone has a bunch of these, I really don’t want to make them. kdmks AT att.net.

Last post

I may have a pair from Ken I don't need. Will see if I can locate them! I need a Winkler oiler for a 1912 timer, if you have a spare. I will call you soon! Best Regards, Dave Baker

1 Replies

865 Views

Last post by DaveB
Tue Sep 21, 2021 10:45 am
FS Late 23 - 25 High Firewall

Last post by SurveyKing « Tue Sep 21, 2021 10:35 am
Replies: 1
by 25tfire » Tue Sep 21, 2021 10:09 am

First post

This is a very nice high firewall in really good condition for it's age. Asking $105 plus shipping in US. Pics available upon request to your email. Thanks

Last post

Hi James,
There are differences between the high 23-24 type and the 25. Can you send me photos please?

Danielsnell2@twc.com

1 Replies

835 Views

Last post by SurveyKing
Tue Sep 21, 2021 10:35 am
1925 Colorado Matched set.

Last post by 25tfire « Tue Sep 21, 2021 10:03 am
Replies: 1
by 25tfire » Mon Sep 20, 2021 4:03 pm

First post

A nice set of 1925 matched set of Colorado plates, have been bead cleaned and painted correct background color (letters and Numbers are not painted.) Pictures available. $75 plus shipping Jim 9seven0three73eight8six4. Thanks for looking

Last post

SOLD 1925 Colorado Plates, Thank You MTFCA

1 Replies

891 Views

Last post by 25tfire
Tue Sep 21, 2021 10:03 am
Stewart speedo model 160 fs. Sold

Last post by Larry C « Tue Sep 21, 2021 7:09 am
Replies: 1
by CTLeonard » Mon Sep 20, 2021 4:47 pm

First post

75 mph speedo fs. Bracket has been played with. 100.00 plus shipping IMG_20210920_154418034.jpg IMG_20210920_154424657.jpg

Last post

I will take it. PM sent.

1 Replies

870 Views

Last post by Larry C
Tue Sep 21, 2021 7:09 am
brass radiator 14/15 FS

Last post by Nv Bob « Mon Sep 20, 2021 11:51 pm
Replies: 1
by Nv Bob » Sun Sep 19, 2021 11:57 am

First post

Will sell either one and keep one
flat tube core
3 rivet neck
Why wait and pay sales tax
$1400 full polish
$1325 need a little polishing
plus shipping
Contact me directly will send pics
Bob
Jalopyt@yahoo.com
Sparks Nv

Last post

Spoken for pending

1 Replies

1115 Views

Last post by Nv Bob
Mon Sep 20, 2021 11:51 pm
Driveshaft bearing parts for sale.

Last post by Dropacent « Mon Sep 20, 2021 10:56 pm
Replies: 2
by Dropacent » Mon Sep 20, 2021 2:54 pm

First post

650A489F-BB6C-48C2-9C5E-EEEA9C35703B.jpeg 4ED3C11F-171B-496D-8603-A578E794D091.jpeg Do your own math. Do yourself a favor and read attached info from Prof. Trent. Tmorsher@icloud.com I bought a new pinion kit a couple years ago and the brand new Chinese bearing had a click in it. The original ford parts will last forDaboutforDever!...

Last post

Update, then there was one remaining , tmorsher@cloud.com

2 Replies

887 Views

Last post by Dropacent
Mon Sep 20, 2021 10:56 pm
For Sale: Late 1923 metal firewall

Last post by speedytinc « Mon Sep 20, 2021 7:27 pm
Replies: 3
by Philip Lawrence » Mon Sep 20, 2021 5:45 pm

First post

I have a late 1923 metal firewall that is surplus to my needs. This was used on the very last 23's that used the low styled radiator and hood. It was only used a few months before Ford went to the 1924 models that used the high radiator in August of 1923. $85.00 plus shipping for this scarce part.

Last post

You are correct John, but four spacers were neccessary to space the firewall back if you used the earlier firewall brackets. The spacers that were used were the small caps that go over the radiator shell just under the radiator mounting castle nuts on the 1919 to 1927 radiators. Of course the old body and steering column bolts would then too long...

3 Replies

796 Views

Last post by speedytinc
Mon Sep 20, 2021 7:27 pm
Keep Your Model T Original with Factory Spec. Drive Shaft Roller Bearing Assembly SOLD

Last post by henryford2 « Mon Sep 20, 2021 7:01 pm
Replies: 21
by henryford2 » Sat Sep 11, 2021 2:00 pm

First post

Keep your Model T original and use parts that meet the original Ford specifications and avoid the costly modern bearing driveshaft roller bearing alternative offered today! I would suggest that if you are unfamiliar with the dimensions of these individual parts and how they relate to each other read the follow post with Trent Boggess's...

Last post

SOLD again, thanks MTFCA

21 Replies

2814 Views

Last post by henryford2
Mon Sep 20, 2021 7:01 pm
FS Ruckstell Large Drum Rear End

Last post by 25tfire « Mon Sep 20, 2021 3:23 pm
Replies: 2
by 25tfire » Mon Sep 20, 2021 9:54 am

First post

26/27 Ruckstell Large Drum Rear End complete with shift lever (new) knob and tube with torque tube adapter, drive shaft torque tube, radius rods and universal joint $1750 Firm

Last post

Ruckstell is spoken for, Thanks for looking.

2 Replies

1158 Views

Last post by 25tfire
Mon Sep 20, 2021 3:23 pm
Need transport for rear end

Last post by T Cruiser « Mon Sep 20, 2021 1:25 pm
Replies: 1
by T Cruiser » Sat Sep 18, 2021 12:58 pm

First post

I need a rear end minus tube and arms in Ventura brought to Tulare. I will help with fuel costs. Thanks Ted 503-728-3476

Last post

I will pay $100.00 to anyone that will bring the rear end to Yulare swap meet from Ventura.Thanks Ted 505-728-3476

1 Replies

817 Views

Last post by T Cruiser
Mon Sep 20, 2021 1:25 pm
Spare Rim

Last post by Allan « Mon Sep 20, 2021 12:26 am
Replies: 7
by Techmaven » Sun Sep 19, 2021 8:03 am

First post

Looking for a rim to use for a spare on my 1922 Touring. It's one of the things that was missing when I purchased the car. I'm on Long Island and to find one local might be best. I will travel if need be though.

Last post

The mounted tyre is on a Hayes rim. That usually means any of the other Ford fixed lug rims will be suitable if another Hayes rim is not forthcoming.
The reverse swap, Hayes to Ford wheels, is not always on due to the 'foot' on the Hayes rim lugs not clearing the edge of the felloe.

Allan from down under.

7 Replies

1583 Views

Last post by Allan
Mon Sep 20, 2021 12:26 am
E & J 656 Brass Lamp top, Bonnet

Last post by DaveB « Sun Sep 19, 2021 11:51 pm
Replies: 1
by DaveB » Thu Sep 16, 2021 10:09 pm

First post

Clean been in long term storage, just polished . Ask for photos $40.00 plus actual shipping cost .D Baker 507-838-0696

Last post

Sold! Thank You!

1 Replies

912 Views

Last post by DaveB
Sun Sep 19, 2021 11:51 pm
Aluminum handled crank

Last post by DaveB « Sun Sep 19, 2021 11:50 pm
Replies: 2
by DaveB » Thu Sep 16, 2021 10:00 pm

First post

Nice clean original aluminum handled crank with a nice early style ratchet. I can text photos email photos . $76.00 and actual shipping Prefer calls Dave Baker 507-838-0696

Last post

t was a busy weekend with some family issues. This is sold and sorry I did not respond to all the calls and text messages. I may have one more and will list it when I have time. Thank You to all who had interest,

2 Replies

1177 Views

Last post by DaveB
Sun Sep 19, 2021 11:50 pm
For sale Set of 1912 Fore Doors

Last post by Burlingtontguy « Sun Sep 19, 2021 8:46 pm

by Burlingtontguy » Sun Sep 19, 2021 8:46 pm

I have a perfect set of 1912 fore doors that need a new home as I sold the 1912 touring a year ago,Asking $1100 OBO plus shipping. E-mail or Call me at 401-932-3191 for a quicker response, Dennis

0 Replies

676 Views

Last post by Burlingtontguy
Sun Sep 19, 2021 8:46 pm
FS Sunday no legwork flea market

Last post by Ruxstel24 « Sun Sep 19, 2021 7:28 pm
Replies: 1
by Ruxstel24 » Sun Sep 19, 2021 12:10 pm

First post

I have 2 fan arms and pulleys with the long fan pulley. Fits on early motor in a 26-27 car if I recall. Stronger memories may correct me.
Both have tight bushings and are clean. One has a Zerk fitting.
Asking $35 each plus $15.50 shipping USA
Please contact via email at hpautorepairdd at Gmail dot com
C32CEB2A-F9F9-4F42-971D-6F357AC6C659.jpeg...

Last post

Engine mount is sold, thanks Scott and MTFCA !

1 Replies

1004 Views

Last post by Ruxstel24
Sun Sep 19, 2021 7:28 pm
1909 1910 door locks F/S SOLD

Last post by Dollisdad « Sun Sep 19, 2021 7:23 pm
Replies: 1
by Layden Butler » Sat Sep 18, 2021 5:15 pm

First post

Original pair of hook catch type door locks.

Last post

I think they are good for 1911-12 also.

1 Replies

930 Views

Last post by Dollisdad
Sun Sep 19, 2021 7:23 pm
FS Added 2 more sets. Outer wheel bearings, nuts and washers

Last post by Ruxstel24 « Sun Sep 19, 2021 3:36 pm
Replies: 6
by Ruxstel24 » Wed Sep 15, 2021 2:18 pm

First post

Good set of used Timken outer front wheel bearings. Been sitting in a can of oil, rollers have no pits and look good. Including a pair of nuts and washers.
Right and left hand internal threads. These are about $80 each new, when they’re in stock...races are available reasonably.
$80 for all including shipping USA
Please contact via email at,...

Last post

These 2 sets spoken for. Thanks MTFCA !
I have a few left hand thread bearings left I will clean up and a set that are not Timken also.

6 Replies

1590 Views

Last post by Ruxstel24
Sun Sep 19, 2021 3:36 pm
FOR SALE*** HEINZE SPRINGFIELD DASH UNIT

Last post by Southfork Creek « Sun Sep 19, 2021 2:59 pm
Replies: 1
by Jack Putnam, in Ohio » Sun Sep 19, 2021 2:30 pm

First post

This is the starter switch, light control use with the Heinze auxiliary starter. Used on mid teen Model T's. $135 plus usps of $16
419-3zero six-39six six.

Last post

I will take this! Thanks Rollie

I will send PM.

1 Replies

885 Views

Last post by Southfork Creek
Sun Sep 19, 2021 2:59 pm
For Sale: 1925 firewall (price reduced)

Last post by Philip Lawrence « Sun Sep 19, 2021 2:08 pm

by Philip Lawrence » Sun Sep 19, 2021 2:08 pm

1925 firewall, this also would have been used in 1926 and 1927 if you had bought bare chassis from Ford to put an aftermarket body on such as a truck or depot hack. It would also be used on the TT trucks for those years. $65.00 plus shipping. New price $50.00

0 Replies

710 Views

Last post by Philip Lawrence
Sun Sep 19, 2021 2:08 pm
FS Accessory engine pan brackets

Last post by Ruxstel24 « Sun Sep 19, 2021 12:22 pm
Replies: 2
by Ruxstel24 » Sun Sep 05, 2021 10:21 am

First post

Not sure exactly how these work, but it says right on them. “Fits all Fords” :)
Cast iron brackets, crankcase repair arms.
$50 OBO for the pair and I’ll pay for the shipping USA
Please contact via email at hpautorepairdd at Gmail dot com

Last post

Make it $20ea OBO plus shipping USA
I have 3 total.
Should fit all 3 in a small flat rate box for $8.55

2 Replies

1363 Views

Last post by Ruxstel24
Sun Sep 19, 2021 12:22 pm
Sunday Clear Out

Last post by Ruxstel24 « Sun Sep 19, 2021 12:20 pm
Replies: 4
by Ruxstel24 » Sun Sep 05, 2021 10:03 am

First post

Please contact via email at hpautorepairdd at Gmail dot com

Nice unmolested curved bottom dash.
No holes, very solid with light surface rust.
Asking $80 plus shipping.

1B662765-440C-4413-9F5D-F679F7A649BF.jpeg

6A63E3CA-D79A-47AE-B860-F16D2E302C8A.jpeg

7DB7C7D3-8E4C-4344-B545-B38F1526D1C0.jpeg

Nice folding and sliding running board...

Last post

Valve spring tools, dash and Marvel carburetor still for sale. I found another Marvel carburetor also. It has all the parts and I’ll add it to the other one if interested for the same money.
Can email pictures.

4 Replies

2159 Views

Last post by Ruxstel24
Sun Sep 19, 2021 12:20 pm
FS Solid not slanted windshield frame.

Last post by Ruxstel24 « Sun Sep 19, 2021 12:17 pm
Replies: 1
by Ruxstel24 » Wed Sep 15, 2021 5:06 pm

First post

Early 22 and back ? Straight windshield frame.
Hinges and screw, all in very good shape. Has some rust pits, but it’s solid.
Asking $150 plus shipping
Please contact via email at hpautorepairdd at Gmail dot com

Last post

Shouldn’t be too bad to ship with no glass ?

1 Replies

837 Views

Last post by Ruxstel24
Sun Sep 19, 2021 12:17 pm
FS Dunn counterweights, price drop

Last post by Ruxstel24 « Sun Sep 19, 2021 12:16 pm
Replies: 5
by Ruxstel24 » Sat Aug 21, 2021 9:28 pm

First post

I have several sets of these, without bolts. I would use new grade 10 bolts anyway.
I found these buried in a metal trunk under numerous milk crates of parts, probably been there close to 50 years. So whether they’re repos or not, I don’t know.
Asking $125 per set of 4, including shipping USA
Please contact via email hpautorepairdd at Gmail dot...

Last post

Still 2 sets available

5 Replies

1756 Views

Last post by Ruxstel24
Sun Sep 19, 2021 12:16 pm
FS Oil Side/tail lights and lenses

Last post by Ruxstel24 « Sun Sep 19, 2021 12:15 pm
Replies: 4
by Ruxstel24 » Mon Aug 30, 2021 7:17 pm

First post

2- JN Brown tail lights, one is missing the burner. $45 including shipping USA
The other has a small chip in the red lens. $45 including shipping USA
1- brass and black side light, I see no name on top. $75 including shipping USA
1- black Corcoran side light. $50 including shipping USA
1- red lens, thick ribbed glass. $15 including shipping...

Last post

Anyone ???
I found a small green lens also.

4 Replies

1403 Views

Last post by Ruxstel24
Sun Sep 19, 2021 12:15 pm
FS Rear axle hub knockers

Last post by Ruxstel24 « Sun Sep 19, 2021 12:11 pm
Replies: 1
by Ruxstel24 » Thu Sep 16, 2021 9:04 am

First post

2 T hub knocker removers. Good threads and screws easily on an axle.
1 TT knocker also....but the picture won’t load :?: I can email it to you.
As I understand, you thread the tool on the axle to be removed and jack up the other side....
$30 each including shipping USA
Please contact via email at hpautorepairdd at Gmail dot com

Last post

TTT .......

1 Replies

909 Views

Last post by Ruxstel24
Sun Sep 19, 2021 12:11 pm
Small emergency brake drums wanted.

Last post by Allan « Sun Sep 19, 2021 12:36 am
Replies: 2
by Allan » Fri Sep 17, 2021 3:52 am

First post

I need two excellent 8 brake drums, used or new. I believe they are in short supply with some of the vendors.

Allan from down under.

Last post

Thank you for the offer Mike. My post was read by an Aussie, and I have a pair organised locally. Much the same price, but without the hefty postage costs.

Thanks again.
Allan from down under.

2 Replies

903 Views

Last post by Allan
Sun Sep 19, 2021 12:36 am
9-10 hood former

Last post by Lemperesg « Sun Sep 19, 2021 12:24 am
Replies: 6
by T Cruiser » Mon Sep 13, 2021 1:04 am

First post

Repo hood former,never mounted. $200 plus shipping or deliver to Tulare. Ted 503 728 3476

Last post

If this is still available I am interested.
George Lemperes
15277 59th Street
Becker, Minnesota 55308
Email
lemperesg@gmail.com

6 Replies

1748 Views

Last post by Lemperesg
Sun Sep 19, 2021 12:24 am
WTB: 1927, Oil pan, trans drums, Triple gears, Drag link

Last post by T Cruiser « Sat Sep 18, 2021 3:31 pm
Replies: 4
by bmklawt » Sat Aug 14, 2021 8:47 pm

First post

Looking for the following parts for when I do a rebuild this winter on my 1927 Touring
Oil Pan
Transmission drums, all three
Triple gears
Driven gear
Drag link, I think this is what it is called, the rod the goes from the end of the steering column to the right front wheel
Magneto coil
Coil box
Gas and spark retard levers or whole steering...

Last post

Bruce, I misplaced your phone number ,would you please call ,or text at 503 709 2530 Thanks, Ted

4 Replies

1674 Views

Last post by T Cruiser
Sat Sep 18, 2021 3:31 pm
FS Set 11-12 touring fenders

Last post by T Cruiser « Sat Sep 18, 2021 2:23 pm
Replies: 1
by T Cruiser » Sat Sep 18, 2021 1:52 am

First post

Set of 4 new fenders and running boards.New never mounted,costs $1535.00 will sell for$1100.00 . Pickup or free delivery to Tulare. Ted 503-728-3476

Last post

The fenders are sold. Thank you

1 Replies

913 Views

Last post by T Cruiser
Sat Sep 18, 2021 2:23 pm
$90ppd All brass water pump, beautiful item for sale

Last post by Dropacent « Sat Sep 18, 2021 1:50 pm
Replies: 3
by Dropacent » Wed Aug 25, 2021 8:36 pm

First post

Here’s one I’ve not seen before. Everything except the shaft appears to be brass, and very well made. Looks like it might have been mounted but I see no wear on it. Perhaps Ma didn’t believe in water pumps and Pa caught holy hell for spending $1.50 on such a extravagant purchase. Regardless, it’ll take $90to get it to your door, postpaid. Better...

Last post

I’m going to start raising the price on this one , if it doesn’t sell soon. Gotta be a brassy lizzy out there needing it!

3 Replies

1579 Views

Last post by Dropacent
Sat Sep 18, 2021 1:50 pm
SOLD ! NOS accessory tail light GO-LIGHT

Last post by Dropacent « Sat Sep 18, 2021 1:43 pm
Replies: 4
by Dropacent » Wed Sep 15, 2021 5:04 pm

First post

Not everyday you have a chance to purchase a 100+ year old New vintage tail light accessory. This is the Go-Light , and was not only a stop light, but also a direction signal and a parking light. NOS in the box, be the first ever to attach it to you favorite auto. $225 delivered to your door. A real attention getter. I’m sure professor Jay has...

Last post

Sold to Perry ! Thanks

4 Replies

1294 Views

Last post by Dropacent
Sat Sep 18, 2021 1:43 pm
Found! internal post within the magneto post housing needed - outside oil line setup

Last post by Craig Leach « Sat Sep 18, 2021 1:04 pm
Replies: 3
by Walt Wise » Thu Sep 16, 2021 9:25 am

First post

I ruined my mag post itself within the center part of the housing. All of my rubber washers/fiber washers for no grounding purpose/nuts are fine. I just ruined the post itself - the part that has the spring/post that goes through the center.

I have bought a new one from Langs and it is installed at a different location at the front of the block...

Last post

Hi Walt,
I think I have a new one, I'll look today.
Craig.

3 Replies

1107 Views

Last post by Craig Leach
Sat Sep 18, 2021 1:04 pm
SOLD ! Front and rear Hassler shocks $100! $100! $100

Last post by Dropacent « Sat Sep 18, 2021 12:05 pm
Replies: 1
by Dropacent » Tue Sep 14, 2021 11:10 pm

First post

Miss Connie says “ get these the @##!¥§ off my nice floor. ! “. I said, “ yes princess! “ I’m tired of the hassle, so here’s a good pile of hassler stuff. Front AND rear. The gray primered front castings need a couple holes filled a bit or rebushed. Néeds the bolts and hardware, Voila! You have the time? save some $$$$. Keep me out of the...

Last post

Sold, well bought ! Thanks Danny and Josh !

1 Replies

840 Views

Last post by Dropacent
Sat Sep 18, 2021 12:05 pm
$95 Gas tank fill , gauge accessory for sale

Last post by Dropacent « Sat Sep 18, 2021 12:02 pm
Replies: 2
by Dropacent » Wed Sep 15, 2021 10:36 pm

First post

Why should I have all the fun? This great accessory filler/ gauge lets you fill the tank without lifting the seat cushion. Just remove the cap, put the nozzle between your passengers legs and pull the lever! If you are a fan of the castings arts, you will appreciate this very well made aluminum casting.
So, I’ll throw this neat fixer-upper out...

Last post

$95 new price, great deal IMHO

2 Replies

1037 Views

Last post by Dropacent
Sat Sep 18, 2021 12:02 pm
Wood Spokes **SOLD!!!***

Last post by Professor Fate « Sat Sep 18, 2021 10:44 am
Replies: 3
by Professor Fate » Fri Sep 17, 2021 9:54 pm

First post

I'm selling my surplus.
Two complete sets of four wheels and demountables. Rears have 11 inch brake drums and demountable rings. Tubes may or may not hold air.
One set is 19 inch. One set is 21 inch. Each sold as a set for $250 each.

Last post

***SOLD!!!!****

3 Replies

1239 Views

Last post by Professor Fate
Sat Sep 18, 2021 10:44 am
SOLD! FOR SALE 1924 CALIFORNIA COMMERCIAL LICENSE PLATE

Last post by Tbz4u « Sat Sep 18, 2021 9:28 am
Replies: 1
by Jay In Northern Ca. » Fri Sep 17, 2021 6:09 pm

First post

Asking $35 plus postage.
1924 plate 1.jpg 1924 plate 2.jpg

Please reply to my email address below if your interested since I don't follow the email system here, thanks.
email.jpg

Last post

I take Jay

1 Replies

706 Views

Last post by Tbz4u
Sat Sep 18, 2021 9:28 am
Stromberg adjuster wells - sold out pending payment(s)

Last post by Scott_Conger « Fri Sep 17, 2021 10:38 pm
Replies: 2
by Scott_Conger » Fri Sep 17, 2021 6:07 pm

First post

I've done a short run of these things and have 3 available

They are $55 each

The first 3 people who EMAIL me, will be the beneficiaries. They will be sold in the order that I receive responses.

Thanks for looking

IMG_20210912_124408513.png

IMG_20210912_124519005.png

Last post

Sold out pending payments

Thank you

2 Replies

950 Views

Last post by Scott_Conger
Fri Sep 17, 2021 10:38 pm
SOLD! 1920 CALIFORNIA LICENSE PLATE

Last post by speedytinc « Fri Sep 17, 2021 6:39 pm
Replies: 1
by Jay In Northern Ca. » Fri Sep 17, 2021 6:14 pm

First post

Asking $30 plus postage.
1920 plate 1.jpg 1920 plate 2.jpg
Please reply to my email address below if your interested since I don't follow the email system here, thanks.
email.jpg

Last post

E mail sent

1 Replies

632 Views

Last post by speedytinc
Fri Sep 17, 2021 6:39 pm
FOR SALE - 1923 CALIFORNIA LICENSE PLATE

Last post by Jay In Northern Ca. « Fri Sep 17, 2021 6:12 pm

by Jay In Northern Ca. » Fri Sep 17, 2021 6:12 pm

Asking $35 plus postage.
1923 plate 1.jpg 1923 plate 2.jpg
Please reply to my email address below if your interested since I don't follow the email system here, thanks.
email.jpg

0 Replies

706 Views

Last post by Jay In Northern Ca.
Fri Sep 17, 2021 6:12 pm
FOR SALE - GAS PRIMER DASH MOUNT HAND PUMP

Last post by Jay In Northern Ca. « Fri Sep 17, 2021 6:05 pm

by Jay In Northern Ca. » Fri Sep 17, 2021 6:05 pm

In good condition. Asking $65 plus $8.40 postage in the U.S.
gas primer hand pump 1.jpg gas primer hand pump 2.jpg gas primer hand pump 3.jpg

Please reply to my email address below if your interested since I don't follow the email system here, thanks.
email.jpg

0 Replies

776 Views

Last post by Jay In Northern Ca.
Fri Sep 17, 2021 6:05 pm
BOTH SOLD! FOR SALE - AUTOMOBILE CLUB OF SOUTHERN CALIFORNIA GOOD ROADS PAIR OF LICENSE PLATE TOPPERS

Last post by Jay In Northern Ca. « Fri Sep 17, 2021 5:44 pm

by Jay In Northern Ca. » Fri Sep 17, 2021 5:44 pm

THESE ARE IN MINT CONDITION AND READY TO MOUNT ON YOUR CAR.Asking $20 each plus $8.40 small flat rate shipping in the U.S.
So-Cal plate toppers.jpg
Please reply to my email address below if your interested since I don't follow the email system here, thanks.
email.jpg

0 Replies

753 Views

Last post by Jay In Northern Ca.
Fri Sep 17, 2021 5:44 pm
Gas light door

Last post by Hudson29 « Fri Sep 17, 2021 4:30 pm
Replies: 3
by AndreFordT » Thu Sep 16, 2021 3:18 am

First post

I am looking for a good usable head light door for one of the Victor2 brass head lights. In Langs catalog it has the number BL-D4.
Can someone out there help me?

Thanks
Andre
Belgium

Last post

I'm glad to hear it! Dave at Chaffin's has always given me excellent service. I'll be ordering a pair of these myself in a month or two. You never know if something like this will be reproduced again.

Paul

3 Replies

1282 Views

Last post by Hudson29
Fri Sep 17, 2021 4:30 pm
Front wire wheel hubs fs. Sold

Last post by CTLeonard « Fri Sep 17, 2021 12:20 pm

by CTLeonard » Fri Sep 17, 2021 12:20 pm

Pair of fronts both have inner bearings. One has two studs missing. 300.00 for the pair plus shipping IMG_20210917_111630943.jpg IMG_20210917_111620557.jpg

0 Replies

790 Views

Last post by CTLeonard
Fri Sep 17, 2021 12:20 pm
FOR SALE - IN LINE METERED SITE GLASS BRASS OILERS

Last post by Jay In Northern Ca. « Fri Sep 17, 2021 10:21 am

by Jay In Northern Ca. » Fri Sep 17, 2021 10:21 am

In good condition. Asking $40 for the pair plus postage.
oiler pair.jpg

Please reply to my email address below if your interested since I don't follow the email system here, thanks.

email.jpg

0 Replies

811 Views

Last post by Jay In Northern Ca.
Fri Sep 17, 2021 10:21 am
PRICE LOWERED - FOR SALE - INNER TUBE METAL VALVE STEM COLLECTION

Last post by Jay In Northern Ca. « Fri Sep 17, 2021 10:11 am

by Jay In Northern Ca. » Fri Sep 17, 2021 10:11 am

There are 27 valve stems of all different sizes here plus some extra parts. All of them have metal dust caps along with various additional hardware.The threads are in over all good condition. Comes with two new valve stems tools. Asking $65 plus postage for the lot. Sold as a lot only.

Metal valve stems 1.jpg Metal valve stems 2.jpg

Please...

0 Replies

771 Views

Last post by Jay In Northern Ca.
Fri Sep 17, 2021 10:11 am
PRICE LOWERED - FOR SALE - STEERING WHEEL ELECTRIC HAND WARMERS NEW OLD STOCK.

Last post by Jay In Northern Ca. « Fri Sep 17, 2021 9:53 am

by Jay In Northern Ca. » Fri Sep 17, 2021 9:53 am

The original acid paper box I had gotten these in years ago disintegrated into confetti. These are still wrapped together as they were in the original box and are a bit stiff with age.They have been in our display case for many years. Asking $30 plus $8.40 postage in the U.S.
hand warmer 1.jpg hand warmer 2.jpg hand warmer 3.jpg hand warmer ad...

0 Replies

751 Views

Last post by Jay In Northern Ca.
Fri Sep 17, 2021 9:53 am
WTB Rack and Pinion Steering

Last post by feelsharp « Fri Sep 17, 2021 9:37 am
Replies: 11
by Harry Lillo » Sun Sep 12, 2021 10:13 am

First post

A number of years ago Gene Wright from the Portland area had marketed a Honda rack and pinion
steering setup for a Model T. I knew a couple of people who used the unit on Model T speedsters and
were happy with the results. Would anyone have one sitting on their shelf that they would be interested
in selling? Or alternatively advise on the...

Last post

Harry,
I used the drag link rods supplied with the unit, cut the mounting clamp end off the original drag link and welded that onto the supplied arm.
So, the drag link function is the same, the spindle arms and tie rod are used as original. From all angles, except looking up from completely
under the car, all steering arms look original.

John

11 Replies

2339 Views

Last post by feelsharp
Fri Sep 17, 2021 9:37 am
Engine/Block 4321900 Search 1920

Last post by 20touring « Fri Sep 17, 2021 8:20 am
Replies: 2
by 20touring » Thu Sep 16, 2021 3:18 pm

First post

Engine/Block 4321900 Search: Looking for my 1920 original engine or block. Possibly in Illinois or Central NY/Utica, NY areas. Thanks! Kevin
Email: KvMoc@aol.com
Phone: 315-672-3473

Last post

Good Lord! I hope that’s not the case with this one! I’m not sure the engine was pulled and replaced back then, might have been just before I bought it 25 years ago-speaking to someone later today that may be able to shed some light on it.

2 Replies

869 Views

Last post by 20touring
Fri Sep 17, 2021 8:20 am
For sale at Hershey

Last post by Craig Leach « Fri Sep 17, 2021 12:24 am
Replies: 3
by Mike Lebsack-Iowa » Thu Sep 16, 2021 10:02 am

First post

I am planning to bring a limited quantity of brand new 28x3 and 30x3.5 clincher rims. I can reserve these for those who contact me first. My Hershey space is GBL 34. Contact me at 319-four thirty- forty nine 95. Thanks, Mike

Last post

Don't meaan to highjack your post but I have two 28 X 3 white wall lester tires for sale to go with those rim's Older but new and still in the rappers.
Craig.

3 Replies

1424 Views

Last post by Craig Leach
Fri Sep 17, 2021 12:24 am
Two original Brass horn reeds.

Last post by ahovey « Thu Sep 16, 2021 11:55 pm
Replies: 1
by DaveB » Thu Sep 16, 2021 10:33 pm

First post

#1 nice I believe it was part of a early Rubes double twist $77.00 PP
#2 nice original stamped Rubes , early double twist horn $87.00 PP
Ask for photos Dave Baker 507-838-0696

Last post

Sent you a text, will call tomorrow.

1 Replies

881 Views

Last post by ahovey
Thu Sep 16, 2021 11:55 pm
WTB working horn

Last post by NU2theT « Thu Sep 16, 2021 7:10 pm
Replies: 2
by NU2theT » Tue Sep 07, 2021 7:18 pm

First post

looking for a good working horn for my 26 Fordor, thanks.

Last post

Back to the top.

2 Replies

1178 Views

Last post by NU2theT
Thu Sep 16, 2021 7:10 pm
WTB Jack Handle

Last post by Dave S « Thu Sep 16, 2021 5:33 pm
Replies: 5
by sweet23 » Sun Sep 12, 2021 3:37 pm

First post

I found a Buckeye jack. I am now in need of a handle if anyone has one available. Original or reproduction is ok. Thank you, Darryl Bobzin

Last post

Somebody said that the originals were hollow. Maybe Kim D.

5 Replies

1407 Views

Last post by Dave S
Thu Sep 16, 2021 5:33 pm
Wanted: antique license plates

Last post by DontKnowMuch « Thu Sep 16, 2021 12:54 pm
Replies: 3
by Bryant » Wed Sep 15, 2021 2:05 pm

First post

Anyone know of a good place to find vehicle license plates? I am looking for a pair of restorable/restored 1926 Maryland tags. I've tried the obvious sources but didn't know if someone knew of a dealer.

Last post

There are some 1926 single plates on eBay. I bought a nice pair of 1926 Maryland plates a few years ago on eBay at a reasonable price. Most of the license plate vendors post on eBay. Good luck with your search.

3 Replies

1159 Views

Last post by DontKnowMuch
Thu Sep 16, 2021 12:54 pm
SOLD- APCO SPRING LOADED ACCESSORY BRASS BRAKE ROD SUPPORTS

Last post by DontKnowMuch « Thu Sep 16, 2021 11:23 am
Replies: 1
by Jay In Northern Ca. » Wed Sep 15, 2021 7:35 pm

First post

These are in mint brand new NEVER USED condition and have been in our display case for lots of years. Asking $75 plus $5 postage in the U.S. APCO brass anti rattle brake rod supports 1.jpg APCO brass anti rattle brake rod supports 2.jpg APCO brass anti rattle brake rod supports 3.jpg

Please reply to my email address below if your interested...

Last post

I would like to buy these if someone else has not bought them.
Thanks
Dennis Sanford

1 Replies

926 Views

Last post by DontKnowMuch
Thu Sep 16, 2021 11:23 am
26-27 Headlight reflectors and rims- SOLD

Last post by TRDxB2 « Thu Sep 16, 2021 10:44 am
Replies: 1
by Tbird » Thu Sep 16, 2021 9:38 am

First post

One reflector appears to be nickel the other chrome. Both the rings appear to be new. The package was opened but not wide enough to get the rings out. There is one retainer clip.
$45 plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_9492.JPG

IMG_9493.JPG

IMG_9494.JPG

IMG_9495.JPG

Last post

I'll take them email sent

1 Replies

640 Views

Last post by TRDxB2
Thu Sep 16, 2021 10:44 am
SOLD : NEVILLE SLIDING FAT-MAN STEERING WHEEL, $600 PLUS SHIPPING

Last post by RichardW « Thu Sep 16, 2021 10:22 am
Replies: 2
by RichardW » Fri Aug 20, 2021 1:10 pm

First post

SOLD : NEVILLE SLIDING FAT-MAN STEERING WHEEL, $600 PLUS SHIPPING

Last post

SOLD : NEVILLE SLIDING FAT-MAN STEERING WHEEL, $600 PLUS SHIPPING

2 Replies

1288 Views

Last post by RichardW
Thu Sep 16, 2021 10:22 am
Stromberg of carb fs. Sold

Last post by CTLeonard « Thu Sep 16, 2021 8:36 am

by CTLeonard » Thu Sep 16, 2021 8:36 am

The metal has about rusted away. Throttle and choke IMG_20210916_072936993.jpg IMG_20210916_073006116.jpg do move freely. Can hear float inside move.going to ask 145.00 plus shipping IMG_20210916_072928858.jpg

0 Replies

758 Views

Last post by CTLeonard
Thu Sep 16, 2021 8:36 am
Model A (yes sorry) Hub Puller SOLD

Last post by henryford2 « Wed Sep 15, 2021 9:59 pm
Replies: 1
by henryford2 » Wed Sep 15, 2021 8:49 am

First post

I'm just guessing that some Model T owners may have a Model A in the garage as well. I believe this is correct for the Model A, thus the tape measure, if not repurpose it into something useful? No markings are clearly visible. $40 includes shipping in the CONUS, please respond to jandulics@gamil.com...

Last post

SOLD, thanks MTFCA

1 Replies

731 Views

Last post by henryford2
Wed Sep 15, 2021 9:59 pm
SOLD - GAS PRESSURE ALL BRASS DASHBOARD GAUGE PAT'D SEPT 1906

Last post by tman12 « Wed Sep 15, 2021 9:58 pm
Replies: 1
by Jay In Northern Ca. » Wed Sep 15, 2021 9:41 pm

First post

This is a well constructed solid brass pressure gauge built by U.S. GAUGE CO., N.Y. The cover glass itself is 2 inches in diameter and screws on. This would look great on any Model T Era or earlier car with a hand fuel pressure pump setup. Asking $125 plus postage.
gas pressure gauge 1.jpg gas pressure gauge 2.jpg gas pressure gauge 3.jpg gas...

Last post

Hi From Iowa! I would like your preasure ga if available! Thanks John

1 Replies

826 Views

Last post by tman12
Wed Sep 15, 2021 9:58 pm
SOLD: An Impressive Pair of All Brass Solar 833 Sidelights

Last post by GGZ « Wed Sep 15, 2021 8:41 pm
Replies: 5
by GGZ » Tue Jul 13, 2021 2:02 pm

First post

SOLD!

Here is an extremely nice, matched pair of Solar 833 all brass sidelamps. These are big lamps and each measure about 12 1/2 tall and the square lens frames are about 4 1/2 . These appear to have been professionally restored awhile back. The interior silvered reflectors are clean and shiny. Both have their original burner assemblies, Solar...

Last post

SOLD 9/29/21

5 Replies

1846 Views

Last post by GGZ
Wed Sep 15, 2021 8:41 pm
May have found one Wanted cluster gear for Jumbo Giant transmission 3 speed with reverse

Last post by Mark Gregush « Wed Sep 15, 2021 8:39 pm

by Mark Gregush » Wed Sep 15, 2021 8:39 pm

Looks like I have 3-4 chipped teeth on one of the cluster gears. Have not pulled it all the way down all the way, so don't know if it is a one piece or pressed on gears. If it is a one piece, would anyone have an extra kicking around?
Thanks

0 Replies

762 Views

Last post by Mark Gregush
Wed Sep 15, 2021 8:39 pm
wanted: Kingston carb float

Last post by Corey Walker « Wed Sep 15, 2021 7:17 pm
Replies: 6
by Bryant » Wed Sep 15, 2021 2:14 pm

First post

Anyone know where to find a float for a Kingston L4 carb? I've looked high and low and found nothing

Last post

I thought you’d found one by reading the comments. That works, but you’d need the L2 hinge also.

6 Replies

1269 Views

Last post by Corey Walker
Wed Sep 15, 2021 7:17 pm
WTB: 26 Hood Shelf

Last post by Bryant « Wed Sep 15, 2021 2:34 pm
Replies: 3
by Scott C. » Fri Aug 27, 2021 1:45 am

First post

I am looking for a set of hood shelfs for a 26 Roadster. Does any one have a decent set that they would sell?

Last post

I had ordered a set for a 26 Tudor about a month ago from chaffinsgarage.com he said he had 2 pairs left and I bought a set. so he might still have another. they were reproduced in the USA by a guy he knew. I thought they looked good. give him a call 951-735-4791

3 Replies

1081 Views

Last post by Bryant
Wed Sep 15, 2021 2:34 pm
SOLD FS NEW Accessory Model T Gas Foot Pedal Kit CHEAPER

Last post by MAG « Wed Sep 15, 2021 10:38 am
Replies: 4
by MAG » Fri Sep 03, 2021 8:30 pm

First post

Accessory gas pedal kit that works with your hand throttle and made for a 1926/27 vaporizer setup. Can be modified to use on earlier cars. New price is $125 but this one can be yours for $50 and $15 shipping. markpaulagember AT aol DOT com

Last post

Item is sold

4 Replies

1553 Views

Last post by MAG
Wed Sep 15, 2021 10:38 am
Electric Fuel Pumps NEW- SOLD

Last post by Quickm007 « Wed Sep 15, 2021 10:22 am
Replies: 1
by Tbird » Wed Sep 15, 2021 9:52 am

First post

I have two new electric fuel pumps still in the box/packaging.
$10 each plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_9467.JPG

IMG_9468.JPG

IMG_9469.JPG

Last post

Interested for both. if that work on a T, Text sent.

1 Replies

733 Views

Last post by Quickm007
Wed Sep 15, 2021 10:22 am
Schadek VW oil pimp NEW SOLD

Last post by Tbird « Wed Sep 15, 2021 10:16 am

by Tbird » Wed Sep 15, 2021 10:16 am

Schadek VW oil pump
Model:
Bomba Oleo VW
311115107AK/HD
N/N 10010A

$15 plus shipping
mikebird@lifeattheride.net or 574-584-6744

IMG_9479.JPG

IMG_9480.JPG

IMG_9481.JPG

0 Replies

736 Views

Last post by Tbird
Wed Sep 15, 2021 10:16 am
H and R Services Starter Solenoid NEW SOLD

Last post by Tbird « Wed Sep 15, 2021 9:57 am

by Tbird » Wed Sep 15, 2021 9:57 am

12 volt Solenoid in the box new
Replacement for FORD SW-3 B6AZ-11450
$5 plus shipping

mikebird@lifeattheridge.net or 574-584-6744

IMG_9474.JPG

IMG_9475.JPG

IMG_9476.JPG

0 Replies

647 Views

Last post by Tbird
Wed Sep 15, 2021 9:57 am

New Topic

19843 topics

Page 95 of 199
- Jump to page:
Previous
1
…
93
94
95
96
97
…
199
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum