Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 44395 Views
-
Last post by love1913
Fri Jan 05, 2024 1:27 pm
-
-
model T mainbearing mold
Replies: 16
by
Gene_French » Sun Jul 17, 2022 10:06 am
First post
my original design Model T mainbearing mold will pour the babbitt bearings in BOTH the block and caps of the Model T Ford engine ... the bearings will be poured at 1 1/8 diameter to allow for finish machining as needed ... instructions are included as well as my phone or email support ... price is $120 plus $16.50 priority mail postage in lower 48...
Last post
to the top again ... thanks MTFCA
- 16 Replies
- 2344 Views
-
Last post by Gene_French
Thu Mar 28, 2024 10:04 am
-
-
mainbearing linebore unit
Replies: 15
by
Gene_French » Sun Jul 17, 2022 9:45 am
First post
linebore unit for boring the mainbearings and cutting thrust surfaces on models T or A Ford mainbearings … includes 4 bearing linebore frame , boring bar and bits and radius/facing bit to cut thrust surfaces and clearance radii , false cam and locator brackets and bushings and dial indicator tool set and instructions … price $1050 plus $95...
Last post
to the top again ...thanks MTFCA
- 15 Replies
- 2313 Views
-
Last post by Gene_French
Thu Mar 28, 2024 10:02 am
-
-
Dome light switch WTB
Replies: 6
by
EricMac » Sat Mar 23, 2024 11:36 am
First post
Mayhap I am dreaming but I'm looking for the last little detail I need for my '26 Fordor restoration, the elusive dome light switch. If you happen to have one please let me know. It looks like the photo I copied from this forum. 71496.jpg
Thanks so much.
Last post
Joe, thanks for the information and Eric, thanks for the correct pictures.
- 6 Replies
- 202 Views
-
Last post by Kenny Edmondson
Thu Mar 28, 2024 9:59 am
-
-
WTB Hub Caps
Replies: 2
by
John_Aldrich » Wed Mar 27, 2024 2:48 pm
First post
Looking for wire wheel hub caps that say Made in Canada .
Last post
Looking for wire wheel hub caps that say Made in Canada .
As mentioned, by Ken, the '26-'27 Canada T with wire wheels used plain hub caps, without the USA made inscription.
777307.jpg
Wood wheel caps were marked Made in Canada
Canada wood hub cap .jpg
- 2 Replies
- 141 Views
-
Last post by DanTreace
Thu Mar 28, 2024 9:49 am
-
-
Six rivet axle housings 1909-1910-1911
Replies: 3
by
1915ford » Tue Mar 12, 2024 5:47 pm
First post
Excellent condition recently media blasted to reveal no rust pits anywhere. $2000.00 located in minnesota. Buy now and i will try to get them a ride to chickasha for you. Mark Cameron mcam@hughes.net
Last post
New price $1750.00
- 3 Replies
- 518 Views
-
Last post by 1915ford
Thu Mar 28, 2024 9:34 am
-
-
- 1 Replies
- 188 Views
-
Last post by W Austen
Thu Mar 28, 2024 9:31 am
-
-
WTB front plate distributor
Replies: 6
by
38 coupe » Tue Mar 26, 2024 11:10 pm
First post
I am looking for a Bosch front plate. It does not have to have the original distributor. I would also consider an Atwater Kent plate.
Thank you,
Fred
Last post
I have a generator AK front plate that has a type RA head on it that has both manual and automatic advance. That head was used more on non ford 4cyl cars. As Jerry said parts are harder to come by, but Tom VanMeteren has some parts especially for the more common model T manual only heads. I was able to get a spare cap, points and rotor from him. I...
- 6 Replies
- 200 Views
-
Last post by JvanMaanen
Thu Mar 28, 2024 8:47 am
-
-
- 0 Replies
- 43 Views
-
Last post by fordrelic
Thu Mar 28, 2024 8:31 am
-
-
FS 1909 E&J Side Lamps Pat.1908 relisted
Replies: 5
by
fordrelic » Mon Feb 19, 2024 11:52 am
First post
For sale a pair of early E&J side lamps Pat. 1908
Used from 1909 to 1912.
Only pair I have ever found.
Condition is nice original with patina.
Price $400 plus shipping.
ej.jpg ej 2.jpg ej3.jpg ej4.jpg
Last post
to the top
- 5 Replies
- 554 Views
-
Last post by fordrelic
Thu Mar 28, 2024 8:25 am
-
-
FS Rubes horn
Replies: 1
by
fordrelic » Sat Mar 23, 2024 3:31 pm
First post
For Sale: Black Rubes horn.
$250 plus shipping.
rubes black.jpg rubes black 2.jpg
Last post
to the top
- 1 Replies
- 156 Views
-
Last post by fordrelic
Thu Mar 28, 2024 8:24 am
-
-
Wanted: Early 1920 parts
Replies: 8
by
Philip Lawrence » Wed Mar 06, 2024 12:45 am
First post
I'm looking for an early starter switch and frame mounted bracket that was riveted to the frame. These were separate parts. They are shown on page 279 (lower corner) of Bruce McCalley's book. I'm also looking for a magneto horn as shown on the same page.
On page 278 of the same book is the instrument panel with the cast light switch handle that...
Last post
Thank you Jim. At least I got the bit about the non starter cars and trucks still having a magneto horn. Now I have to go looking for a magneto horn for the 1920 buckboard i restored in 1987! I wondered why the 1922 wooden firewalls stiil had the relief and holes for the magneto horn mounting.
Allan from down under.
- 8 Replies
- 609 Views
-
Last post by Allan
Thu Mar 28, 2024 1:49 am
-
-
SOLD: Stromberg LF - really cheap ZOOM
Replies: 5
by
Scott_Conger » Tue Mar 26, 2024 4:49 pm
First post
Complete LF (other than minor items listed below)
not as good as an OF, but not $400, either
'Way better than an NH
complete including the float (and the larger version acorn nut which no one makes)
there's a dent on the inlet which affects nothing, but can be straightened (by you) - can be seen on one picture
missing adjuster retaining...
Last post
Neil, if it is anything like an OF, any solid wire choke cable will do as long as both ends of the cable housing are anchored. You can always fit the correct one when you find one.
Allan from down under.
- 5 Replies
- 411 Views
-
Last post by Allan
Thu Mar 28, 2024 1:35 am
-
-
WTB: NOS SPINDLE ARMS
Replies: 8
by
Stephen1915 » Sun Mar 24, 2024 3:16 pm
First post
Want to buy a pair of nos 1911-1919 STRAIGHT spindle arms.
Please call 314-287-1901
Email: stephensmail2001@gmail.com
Last post
Sorry Karl looking for new old stock. I edited my ad.
- 8 Replies
- 352 Views
-
Last post by Stephen1915
Wed Mar 27, 2024 11:42 pm
-
-
coil and light
Replies: 2
by
Model T Matt » Wed Mar 27, 2024 9:10 pm
First post
Old Heinze wood Coil and old dash light asking $45.00 includes shipping call Matt 503-82four-268one
Last post
Sold to Bryan Thanks
- 2 Replies
- 129 Views
-
Last post by Model T Matt
Wed Mar 27, 2024 10:06 pm
-
-
Steering wheel FS
Replies: 1
by
colonelpowers » Wed Mar 27, 2024 8:47 pm
First post
I bought this a while back with some other stuff and didn't see the front. I don't know what happened to the spider, but someone milled or filed a section out of the center. I has a nice wooden ring and someone could probably make use of it. It is $35 plus shipping if anyone wants it.
NOTE I probably have a buyer. Will mark it sold when deal is...
Last post
Hello, Joshua, I'll take tyhe steering wheel, Thanks, Dennis
- 1 Replies
- 153 Views
-
Last post by Burlingtontguy
Wed Mar 27, 2024 9:26 pm
-
-
- 0 Replies
- 121 Views
-
Last post by Model T Matt
Wed Mar 27, 2024 9:13 pm
-
-
Hand Pumps
by
Model T Matt » Wed Mar 27, 2024 9:07 pm
have 3 Hand pumps 125.00 for all includes shipping call Matt 503-824-268one
- 0 Replies
- 126 Views
-
Last post by Model T Matt
Wed Mar 27, 2024 9:07 pm
-
-
Eisemann Mag.
by
Model T Matt » Wed Mar 27, 2024 9:05 pm
for sale type M4G6 Mag. found in Box Today asking $250.00 includes shipping call Matt 503-824-268one
- 0 Replies
- 109 Views
-
Last post by Model T Matt
Wed Mar 27, 2024 9:05 pm
-
-
Glass Visor for open car FS
by
colonelpowers » Wed Mar 27, 2024 8:42 pm
This visor came off of an unrestored 26 Touring and was probably only the old car for its entire life. It is in very nice condition and complete with original paint and glass. I can't decide what color the glass actually is. On the car I always thought it was black but looking through it at my shop lights it had a green hue. Either way it is very...
- 0 Replies
- 116 Views
-
Last post by colonelpowers
Wed Mar 27, 2024 8:42 pm
-
-
For Sale: TT Ruckstell
by
Philip Lawrence » Wed Mar 27, 2024 8:41 pm
TT Ruckstell rear axle. Missing driveshaft and radius rods. Was removed from a home made tractor. It looks to be in good shape. Price $500.00 I'm open to offers. I can deliver it to the Bakersfield swap meet in May.
- 0 Replies
- 84 Views
-
Last post by Philip Lawrence
Wed Mar 27, 2024 8:41 pm
-
-
New U-Joint T-2571-A
Replies: 2
by
Model T Matt » Wed Mar 27, 2024 7:50 pm
First post
For Sale New U-Joint asking $90.00 includes shipping call Matt 503-82four-268one
Last post
Joint Sold
- 2 Replies
- 110 Views
-
Last post by Model T Matt
Wed Mar 27, 2024 8:09 pm
-
-
Chrome Mirrors
by
Model T Matt » Wed Mar 27, 2024 8:00 pm
For Sale pair of T-17700-C mirrors asking $80.00 for the pair call Matt 503-82four-268one
- 0 Replies
- 93 Views
-
Last post by Model T Matt
Wed Mar 27, 2024 8:00 pm
-
-
- 0 Replies
- 134 Views
-
Last post by Model T Matt
Wed Mar 27, 2024 7:47 pm
-
-
Bosch Parts
by
Model T Matt » Wed Mar 27, 2024 7:43 pm
Have Gears and Shafts and lock nuts marked Bosch 1 -2 -3-4 asking $220.00 for all shipped to your door call Matt 503-82four-268one
- 0 Replies
- 115 Views
-
Last post by Model T Matt
Wed Mar 27, 2024 7:43 pm
-
-
Delivery Car Fender Irons
Replies: 13
by
Tbird » Tue Nov 16, 2021 9:26 am
First post
I've been researching and planning and making the necessary pieces for my delivery car. One item was the fender irons. I have drawn these unique fender irons up and 3D printed them to exact dimensions. I have now finally secured a foundry that will cast these for me. I was only going to have one set cast, but a forum member had contacted me and...
Last post
Mike, any thought on how much for the finished product, I think something like this would work well on my home-made pickup. George Hand
George, I had these casted back in 2022 for my Delivery Car project and only made a small run of them for those who requested them. At the time they were $125/pair. I don’t foresee making another run because...
- 13 Replies
- 2003 Views
-
Last post by Tbird
Wed Mar 27, 2024 6:51 pm
-
-
Wanted Holly H carb and...
Replies: 3
by
JSteele » Tue Mar 26, 2024 4:12 pm
First post
I'm looking for a Holly H1 3 screw bowl or possibly a whole carb in decent useable shape.
I'm also looking for Brass headlight rims for a 1912 T, E & J 666.
Last post
Replacement brass bowls for early Holly carbs would be a good thing to have reproduced. George
- 3 Replies
- 228 Views
-
Last post by George Hand
Wed Mar 27, 2024 6:08 pm
-
-
FS: Original Oil Pan Support Bracket (Sold)
Replies: 6
by
WaltM » Fri Jan 05, 2024 4:36 pm
First post
For Sale: Original oil pan support bracket. A must if running an auxiliary transmission. Threads are in good shape. Price $130 plus shipping. Call or Text (248) 894-75fiveone.
Last post
Belly Band.
- 6 Replies
- 795 Views
-
Last post by George Hand
Wed Mar 27, 2024 5:55 pm
-
-
1914 Coil Box
Replies: 1
by
ThreePedalTapDancer » Wed Mar 27, 2024 5:12 pm
First post
Nice clean late 1913-1914 slant cover coil box. Excellent working condition. Very straight. Nice gloss black paint,no damage, some very minor light scuffs here and there, nothing serious. Original switch and brass cover. Has newer wood and wiring. Original firewall mounting bolts. New latches, installed but fastening tabs not bent over yet....
Last post
IMG_0519.jpeg
- 1 Replies
- 163 Views
-
Last post by ThreePedalTapDancer
Wed Mar 27, 2024 5:15 pm
-
-
- 0 Replies
- 67 Views
-
Last post by Tbird
Wed Mar 27, 2024 1:58 pm
-
-
Minnesota Swapmeet April 20.
Replies: 2
by
BobP » Thu Mar 21, 2024 12:50 pm
First post
We are having our 7th annual prewar Model T-Model A Ford era Swap meet, car show at our farm on Saturday April 20, 2024 at 7am. All makes are welcome. Free overnight primitive camping. Free setup and admission. Location is at Bob and Helen Peterson's, 7525 County 12 Blvd. Kenyon, Mn. 55946. 50 miles south of St. Paul. Any questions, CALL Bob, 507...
Last post
btttttttttttt
- 2 Replies
- 257 Views
-
Last post by BobP
Wed Mar 27, 2024 12:48 pm
-
-
Horn Kit
Replies: 7
by
Model T Matt » Tue Mar 26, 2024 8:10 pm
First post
2 ft Horn kit new in box part T-13802-HS2 asking $80.00 includes shipping call Matt 503-82four-268one
Last post
Good information, thanks Mark! I'm really glad some items are starting to surface and be available again! A guy can order a kit today from Jim (937)692-6100.
- 7 Replies
- 320 Views
-
Last post by Rick_Rice
Wed Mar 27, 2024 12:40 pm
-
-
Group of Books
Replies: 1
by
Model T Matt » Mon Mar 25, 2024 7:42 pm
First post
For Sale a nice group of Model T Books asking $125.00 for the group shipped to your address-give me a call Matt at 503-82four-268one
Last post
new price $100.00 shipped
- 1 Replies
- 258 Views
-
Last post by Model T Matt
Wed Mar 27, 2024 9:25 am
-
-
- 0 Replies
- 165 Views
-
Last post by T-Brass
Wed Mar 27, 2024 8:50 am
-
-
- 8 Replies
- 393 Views
-
Last post by michaelb2296
Wed Mar 27, 2024 8:34 am
-
-
Wanted: Early parts and accessories catalogs.
by
Philip Lawrence » Wed Mar 27, 2024 1:14 am
I'm interested in buying original 1900 to 1915 parts and accessories catalogs by the many companies that catered to the early motorists. I especially would like a pre 1910 Dykes catalog. Please contact me by email through the forum. Thanks in advance.
- 0 Replies
- 99 Views
-
Last post by Philip Lawrence
Wed Mar 27, 2024 1:14 am
-
-
For Sale: Accessory oval rear window (New lower price)
Replies: 2
by
Philip Lawrence » Tue Mar 19, 2024 2:24 pm
First post
This is a model T era accessory. An aluminum frame that measures 12 7/8 x 6 7/8 for the Runabout or Touring. Uses Isinglass for the window. Makes a simple screw on assembly. Polish it to a mirror shine and add bling to the rear of your car. The top photo shows the rearward facing side (it had been installed incorrectly). If you look closely in...
Last post
Still available.
- 2 Replies
- 316 Views
-
Last post by Philip Lawrence
Tue Mar 26, 2024 11:36 pm
-
-
26-27 shift lock
Replies: 1
by
Model T Matt » Tue Mar 26, 2024 8:07 pm
First post
New Shifter for 1926-1927 Ruckstell asking $420.00 shipped to your location call Matt 503-82four-268one
Last post
Sold thanks Joe
- 1 Replies
- 249 Views
-
Last post by Model T Matt
Tue Mar 26, 2024 10:38 pm
-
-
Wakesha Head
Replies: 3
by
Model T Matt » Tue Mar 26, 2024 8:47 pm
First post
Fresh from hiding- appears to have came off running veh. has a line casting or crack ? no sign of leak- shown in picture asking $400.00 plus shipping call Matt 503-82four-268one
Last post
Sold pending payment
- 3 Replies
- 345 Views
-
Last post by Model T Matt
Tue Mar 26, 2024 10:35 pm
-
-
WTB 1916 HEADLAMPS, SIDE & TAIL LAMPS
Replies: 3
by
Stephen1915 » Fri Mar 22, 2024 5:12 pm
First post
Looking for a excellent set of 1915 to 1917 headlamps for my 1916 Coupelet. The focus screw would be in the 12 o’clock position. Also looking for side, and tail lamps correct for 1916. Patent date should help narrow down the correctness. Must be in excellent condition, and complete. No rust pitted parts! Thanks!
314-287-1901
Last post
Stephen
I Have an exceptional original set. (side lights, tail light, and headlights) They are correct with original elbow sockets for the headlights. I can get you some pictures tomorrow if you are interested.
- 3 Replies
- 204 Views
-
Last post by Larry
Tue Mar 26, 2024 9:35 pm
-
-
Open Car Brass Mirrors
Replies: 1
by
Model T Matt » Tue Mar 26, 2024 8:20 pm
First post
One Set T-17700-B Mirrors fit open cars 1909-1915 asking $70.00 for the pair shipped to your location call Matt 503-82four-268one
Last post
Sold Thanks Gino
- 1 Replies
- 237 Views
-
Last post by Model T Matt
Tue Mar 26, 2024 9:22 pm
-
-
FS WOOD FELLOW WHEELS SOLD
Replies: 2
by
Mark Chaffin » Thu Mar 14, 2024 5:37 pm
First post
One pair of front (30x3) wood fellow wheels with Firestone Non-Skid tires. Overall condition is fair. Price for the pair WAS $400 NOW $300. Pick up is preferred. Can ship; however, will be a bit pricy. Mark Chaffin (951) 805-0928 SOLD
WHEELS 1.jpg
WHEELS 2.jpg
WHEELS 3.jpg
WHEELS 4.jpg
Last post
Sold to Dean. Thank you
- 2 Replies
- 579 Views
-
Last post by Mark Chaffin
Tue Mar 26, 2024 9:14 pm
-
-
Sediment Bowl
Replies: 1
by
Model T Matt » Tue Mar 26, 2024 8:15 pm
First post
T-2902 Sediment Bowl fits 1909-1925 Model T and TT Fords this is new in the box asking $65.00 includes shipping give a call Matt 503-82four-268one
Last post
Held for Payment
- 1 Replies
- 114 Views
-
Last post by Model T Matt
Tue Mar 26, 2024 8:24 pm
-
-
MINT CONDITION TURTLE DECK 23-25
Replies: 3
by
Stephen1915 » Wed Mar 06, 2024 3:45 pm
First post
Here we have an early takeoff, turtle deck, near mint, metal is perfect and straight, still wearing its original black varnish paint. Latch works as it should, no key. Lid is nice and flat NO DENTS NO DINGS. Correct for late 22 to 1925.
$850
Located in Arnold Missouri
Can deliver to Chickashea
314-287-1901
Last post
Anyone need a near perfect Turtle Deck?
- 3 Replies
- 674 Views
-
Last post by Stephen1915
Tue Mar 26, 2024 7:42 pm
-
-
1915 COUPELET SIDE AND TAIL LAMPS
Replies: 1
by
Stephen1915 » Wed Mar 20, 2024 2:29 pm
First post
1915 Coupelet Lamps. For parts or restoration. Two rear, one left and right. Would make a great pair for turn signals!
$350 obo for all
314-287-1901
Last post
Pending Sale
- 1 Replies
- 307 Views
-
Last post by Stephen1915
Tue Mar 26, 2024 7:42 pm
-
-
F.S. NEW 3:1 OR 3.25:1 39 Tooth Ring Gear
Replies: 2
by
Stephen1915 » Mon Mar 18, 2024 1:52 pm
First post
I have a perfect new, never been used, 39 tooth stepped ring gear made by Mark auto. You can use two different pinions with this ring gear to have either the three to one ratio or the 3.25 to 1 ratio. I can send pictures on request. If I don’t have them posted shortly, please call do not email. Ring gear only!
$325
314-287-1901
Last post
New price $300
- 2 Replies
- 372 Views
-
Last post by Stephen1915
Tue Mar 26, 2024 7:40 pm
-
-
WTB: WIDE-TRACK PARTS, Drag-Link
Replies: 5
by
Stephen1915 » Mon Mar 18, 2024 3:16 pm
First post
I am in need of a nice wide track drag link for my 1916 Coupelet, would rather look for a nice one before making one. Also looking for any other wide track parts in nice condition.
Please Call 314-287-1901
Last post
To the top.
Front Axle anyone?
- 5 Replies
- 412 Views
-
Last post by Stephen1915
Tue Mar 26, 2024 7:40 pm
-
-
Wanted Three Rajo Rocker Arms Model 30
Replies: 14
by
WaltM » Wed Nov 01, 2023 4:50 pm
First post
WTB: Looking for three Rajo rocker arms for a commercial Rajo head (model 30). Call or text (248) 894-75fiveone. Any help greatly appreciated. Thanks, Walt
Last post
Still looking, Thanks, Walt
- 14 Replies
- 1271 Views
-
Last post by WaltM
Tue Mar 26, 2024 3:54 pm
-
-
- 3 Replies
- 308 Views
-
Last post by TheSaintDiscJockey
Tue Mar 26, 2024 2:42 pm
-
-
any interest in NEW U & J bowl nuts?
Replies: 1
by
Scott_Conger » Tue Mar 26, 2024 1:44 pm
First post
I may do a small run of some of U & J bowl nuts with the correct threads later this summer, if there happens to be any interest. If there is no interest, then I will make them for just myself. There will be none for sale later, if that is the case.
these nuts are a different size than found on most carburetors of similar vintage and thus I...
Last post
I might want one if you sell me one of the U&J's . Keeping my fingers crossed. Cheers : Bruce
- 1 Replies
- 130 Views
-
Last post by Bruce Compton
Tue Mar 26, 2024 2:16 pm
-
-
Still looking for
Replies: 4
by
Dollisdad » Mon Mar 25, 2024 9:53 pm
First post
10-11 Torpedo gas tank.
No hump spool.
Radiator neck mount lic. plate bracket.
Thanks.
Last post
Tom, I have a rad neck mount license plate bracket.
- 4 Replies
- 428 Views
-
Last post by KimDobbins
Tue Mar 26, 2024 12:52 pm
-
-
Fs cast muffler ends
by
Karl Von Neumann » Tue Mar 26, 2024 12:27 pm
17 to 20 muffler ends on end has a tab busted off 45$ plus the ride bolt is there I don't know if it will come apart haven't tried
- 0 Replies
- 140 Views
-
Last post by Karl Von Neumann
Tue Mar 26, 2024 12:27 pm
-
-
Fs 17 18 coil box
by
Karl Von Neumann » Tue Mar 26, 2024 12:22 pm
Coil box with top for 17 and 18 does need to be rebuilt wood is falling apart. Condition of the switch is unknown no key 50$ plus the ride
- 0 Replies
- 108 Views
-
Last post by Karl Von Neumann
Tue Mar 26, 2024 12:22 pm
-
-
- 0 Replies
- 136 Views
-
Last post by Karl Von Neumann
Tue Mar 26, 2024 12:18 pm
-
-
FS Distributor (Reeder?) w/Bosch German VW
Replies: 7
by
RVA23T » Fri Mar 22, 2024 3:37 pm
First post
As pictured (actualy has 4 plug leads but only 3 pictured). With cam gear. Shaft side play is very tight, What appears as rust or dirt is older grease. Cap looks unused. Rotor looks like it was only test run. Do not know condition of the condenser. $150 plus Shipping costs.
ate oh for ninty-five 5+93&96 or email kampfdackel85 at yahoo DOT com...
Last post
New price in ad
- 7 Replies
- 529 Views
-
Last post by RVA23T
Tue Mar 26, 2024 6:45 am
-
-
Offset Racing Spindles
Replies: 1
by
Plankhill » Tue Mar 26, 2024 4:54 am
First post
For Sale: Offset racing spindles. Only one steering arm. $175 plus $25 shipping US only Spindles 2.jpg
Last post
I’ll buy them. Sending email. Thanks
- 1 Replies
- 255 Views
-
Last post by csnailnrun
Tue Mar 26, 2024 6:30 am
-
-
- 2 Replies
- 225 Views
-
Last post by TheSaintDiscJockey
Tue Mar 26, 2024 2:17 am
-
-
SOLD Bailey's Gasoline gage lower price SOLD
Replies: 3
by
Craig Leach » Fri Mar 15, 2024 10:58 pm
First post
Bailey's Gasoline Gage for Ford Cars. This is for a oval tank. With the original box ( box not in great shape ) Gage is used & has no gasket. Is free
& moves easy but shows wear on the stem. Was $120 now $100 + the ride six0two-7six9-0two57
IMG_2993.jpg IMG_2994.jpg
Craig. IMG_3005.jpg
Last post
Hi Walt,
It's on the way. Thanks.
Craig.
- 3 Replies
- 511 Views
-
Last post by Craig Leach
Tue Mar 26, 2024 12:59 am
-
-
SOLD Dipstick lower price Sold
Replies: 3
by
Craig Leach » Fri Mar 15, 2024 10:36 pm
First post
IMG_2996.jpg Period T dipstick, Knurled knob has paten applied for on the top. No oil residue may be NOS? was
$75 now $65+ the ride six02-7six9-0two57 Yes it is assembled backwards.
Craig. IMG_3006.jpg
Thanks MTFCA
Last post
On the way Mike.
Thanks. Craig.
- 3 Replies
- 561 Views
-
Last post by Craig Leach
Tue Mar 26, 2024 12:58 am
-
-
SOLD Modified Rex Rivet Press SOLD
Replies: 3
by
Craig Leach » Fri Mar 08, 2024 6:58 pm
First post
Modified anvil & casting so it will press the rivet in the none removable band ear making nice curled down band rivets. IMG_2973.jpg IMG_2972.jpg IMG_2971.jpg
$35 plus shipping, will fit a small USPS flat rate box.
Craig.
Thanks MTFCA
Last post
Hi Ron they are on their way.
Thanks.
Craig.
- 3 Replies
- 633 Views
-
Last post by Craig Leach
Tue Mar 26, 2024 12:56 am
-
-
Books
Replies: 3
by
Model T Matt » Mon Mar 25, 2024 7:38 pm
First post
For Sale an assortment of Model T related books-asking $120.00 for all shipped to you-give me a call 503-824-268 one Thanks Matt
Last post
Matt, these books will be wonderful to read during next year's Ice-Cold Wintertime ! I appreciate the very fair price for this literature Amigo.
- 3 Replies
- 217 Views
-
Last post by DustySpokes
Mon Mar 25, 2024 8:54 pm
-
-
WTB 19-20 ignition switch
by
Model T Mark » Mon Mar 25, 2024 8:39 pm
I’m looking for a really good or perhaps a new old stock ignition switch with the heavy cast light switch handle. We are struggling with broken pot metal parts. This is the last part needed to complete the restoration of a high point show car. It’s a Canadian export to Australia. Any help would be greatly appreciated. Thanks in advance. Mark...
- 0 Replies
- 111 Views
-
Last post by Model T Mark
Mon Mar 25, 2024 8:39 pm
-
-
Found one!!! WTB 4" Black Rubber Horn Bulb
Replies: 8
by
KeithG » Sat Aug 26, 2023 6:43 pm
First post
Found one! Want to buy a new or good used 4 black rubber horn bulb, part number 6432RBL. The vendors are out of stock and my original horn bulb is all but shot. Thanks,
Keith cgumbinger@att.net
Last post
Hi Tom, can you make them in red rubber, the color red that most rubber was before and during the Model T era? There's a definite market for those.
Ed aka #4
- 8 Replies
- 833 Views
-
Last post by YellowTRacer
Mon Mar 25, 2024 8:00 pm
-
-
Now shipping Full Flow Float Valves for 2024 touring season
Replies: 5
by
Scott_Conger » Fri Mar 15, 2024 5:36 pm
First post
Why strangle your car with modern INCORRECTLY MADE float valves?
standard vs full flow.jpg
Do my valves work? Ask the guy who just passed you on that last long hill...
Full Flow Float Valves in Process.jpg Full Flow Float Valves.gif
For info EMAIL ME DIRECTLY
I don't monitor ads closely particularly after it sinks out of view, so EMAIL ME...
Last post
preparing first shipments of 2024
don't miss out
email me directly for info
- 5 Replies
- 498 Views
-
Last post by Scott_Conger
Mon Mar 25, 2024 7:55 pm
-
-
WTB Early Pliers, Part No. T 1903
Replies: 49
by
BigAl » Mon Sep 18, 2023 12:47 pm
First post
The last tool I need to complete my 1911 Tool Kit! Thank you MTFCA and Bob for helping me with finding and buying the other two tools I needed. The following picture is the T 1903 Pliers I am looking for. Any help or leads will be great fully appreciated. 1911 T 1903 PLIERS - 091523.JPG
Last post
Still Looking
- 49 Replies
- 4104 Views
-
Last post by BigAl
Mon Mar 25, 2024 7:35 pm
-
-
SOLD klaxton horn
Replies: 3
by
Karl Von Neumann » Mon Mar 25, 2024 11:44 am
First post
For sale one klaxton 8c 8volt horn works need to be restored not sure if the bracket is T or not 40$ plus the ride from pleasant prairie wisconsin
Last post
SOLD SOLD SOLD
- 3 Replies
- 184 Views
-
Last post by Karl Von Neumann
Mon Mar 25, 2024 6:07 pm
-
-
FS cheap gen armatures
by
Karl Von Neumann » Mon Mar 25, 2024 3:41 pm
Gen armatures for beer money plus the ride 5 total please read the tags 2 failed continuity 1 failed the growler 2 have shaft issues ( 1 bent 1 the end is mushroomed) beer money like 20$ other wise they are going to the scrapyard I have some housings and end caps. Shoot me a email or questions
- 0 Replies
- 173 Views
-
Last post by Karl Von Neumann
Mon Mar 25, 2024 3:41 pm
-
-
- 2 Replies
- 255 Views
-
Last post by Dale_mcm
Mon Mar 25, 2024 3:30 pm
-
-
Capacitors for Model T Ford Ignition Coils?
Replies: 2
by
Ron Patterson » Thu Mar 14, 2024 11:17 am
First post
For Sale, replacement capacitors for Model T Ford ignition Coil rebuilding. These are excess to my needs.
Type 418P Orange Drop, Round Profile, Polyester Film-Foil capacitors. Capacitance .47 uF, 400v, dV/dt rating of 700 volts/uS. I have installed over 25,000 of these capacitors over the years with no problems or component failures.
Perfect for...
Last post
Bring to top
- 2 Replies
- 482 Views
-
Last post by Ron Patterson
Mon Mar 25, 2024 2:35 pm
-
-
SOLD: 1926-27 wire wheels and hubs package deal
Replies: 3
by
KWTownsend » Sat Mar 09, 2024 7:53 pm
First post
Set of five, 1926-27 wire wheels complete with front and rear hubs, front dust caps, 5 brass hubcaps, and lug nuts. These are in very nice condition and use 4.40/4.50x21 tires (not included.) They are available for free pick-up at the Portland Swap Meet April 5-7 at the Portland Expo Center. $900.
26-27 wire wheels 2.jpg
26-27 wire wheels...
Last post
Sold. Thanks Jeremy. Thanks MTFCA
- 3 Replies
- 625 Views
-
Last post by KWTownsend
Mon Mar 25, 2024 12:20 pm
-
-
FS 3-1932 B Manifolds. $75 FOR ALL
by
got10carz » Mon Mar 25, 2024 11:49 am
For Sale. 3 Manifolds. These are considered a performance upgrade on a T. All have issues, intake has 1 broke ear. 1 exhaust has crack, 1 exhaust worn pipe flange.
$75 for all. Steve 701 212 5009
- 0 Replies
- 182 Views
-
Last post by got10carz
Mon Mar 25, 2024 11:49 am
-
-
FS accessory vesta spot light
Replies: 3
by
Karl Von Neumann » Thu Feb 22, 2024 2:18 pm
First post
Vesta spot light and mount needs restoration great for a patina car switch works but is crusty. $65 plus the ride
Last post
Back to top
- 3 Replies
- 656 Views
-
Last post by Karl Von Neumann
Mon Mar 25, 2024 11:45 am
-
-
WTB: Early Wishbone
Replies: 3
by
Brian D » Sun Mar 24, 2024 4:57 pm
First post
Any one coming to Luray swap meet, One of the club members is looking for a early above axle wishbone. Straight with good threads. We can repair the ball if need be.
Brian Dowell
Cell: 586 864 5110.
Last post
brian i have a early wish bone and plan on going to Luray. i will give you a call. dan mari 410 241 4584
- 3 Replies
- 247 Views
-
Last post by RedDogPilot
Mon Mar 25, 2024 7:43 am
-
-
FS - Fracto Visible Lubricator (SOLD)
Replies: 2
by
t-time » Sun Mar 24, 2024 2:08 pm
First post
NOS Fracto visible lubricator accessory oil level maintainer. With original wood box. Missing a couple line fittings, instructions and wood box lid. $195 includes US shipping.
Last post
Have you sold this product yet? I need it.
- 2 Replies
- 326 Views
-
Last post by WilliamBarnhill
Mon Mar 25, 2024 3:36 am
-
-
Rear axle Hyatt roller bearings F/S
Replies: 1
by
Layden Butler » Sun Mar 24, 2024 6:28 pm
First post
Good pair of bearings, tight cages, no pits spalling or other troubles, .003 wear so plenty of life left, clearance priced at $50 for the pair, domestic postage $10.
Last post
I will take those Hyatt bearings. Email sent. Thanks!
- 1 Replies
- 308 Views
-
Last post by vwmarc
Sun Mar 24, 2024 10:32 pm
-
-
Wanted: Hood hold downs. Found
Replies: 2
by
Philip Lawrence » Tue Mar 19, 2024 11:51 pm
First post
Looking for three more hood hold downs as pictured. Thanks in advance. Email is preferred.
Last post
I've got 4 2 are pretty pitted ill shoot you an email with pics
- 2 Replies
- 336 Views
-
Last post by Karl Von Neumann
Sun Mar 24, 2024 7:18 pm
-
-
Need a source for Top socket nesting
Replies: 5
by
JTT3 » Sat Mar 23, 2024 4:58 pm
First post
Forum looking for a source for top socket nesting
These are for Dogleg sockets 09/10 thanks in advance for any help. Best John
Last post
Karl truthfully I don’t know but any help would be great. Send some pictures if you can. Best John
Illtake aloof and see is any are similar
- 5 Replies
- 381 Views
-
Last post by Karl Von Neumann
Sun Mar 24, 2024 6:28 pm
-
-
WTB Raydex Light diffuser
Replies: 8
by
WorldChamp1914 » Wed Mar 06, 2024 11:24 am
First post
I have a pair but one needs repair…..any out there for sale?
Last post
I have a 1921 T
The differences in electric headlight buckets are how they are mounted on the car: fork, fender support arm (subtle bracket differences), or fender brace. Also the adjustment position screw 6 vs 9 o'clock. Rim finish 1915 Brass, then Black then Nickle (1926-27). The lens changes from round to H pattern caused the clips inside...
- 8 Replies
- 565 Views
-
Last post by TRDxB2
Sun Mar 24, 2024 5:47 pm
-
-
FS: More E&J 32 Side Lights for a 1914, Restorable
by
Rodger Erickson » Sun Mar 24, 2024 2:05 pm
FS: One pair E&J Model 32 side lights (or cowl lamps) for a 1914 Ford, with mounting brackets riveted to the bodies, along with an extra Model 32 parts lamp. Also included are 3 founts and 2 burners, and one extra door frame. One door will need to be re-attached somehow, the hinge broke off at the light. Otherwise these aren't too bad, the...
- 0 Replies
- 125 Views
-
Last post by Rodger Erickson
Sun Mar 24, 2024 2:05 pm
-
-
FS: Restorable E&J Model 32 Side Light c. 1914
Replies: 3
by
Rodger Erickson » Sun Feb 18, 2024 10:01 pm
First post
FS: A decent, restorable E&J Model 32 Black & Brass Side Light, Right Hand Side, with Fount and Burner. I'm guessing this dates from mid to late 1914. All steel except for the top. This is the earlier version that does not have the mounting brackets riveted directly to the lamp. This light is quite nice, there are a few dents in the top and the...
Last post
Sorry I would prefer not to part this out. Thanks.
- 3 Replies
- 464 Views
-
Last post by Rodger Erickson
Sun Mar 24, 2024 1:55 pm
-
-
FS Macbeth round Healight Lenses
Replies: 5
by
TRDxB2 » Mon Jun 12, 2023 1:14 am
First post
I prefer PayPal to Family / Friends. Email me if interested with zip code to calculate shipping. Shipping extra
The 8-1/4 lens is flat, without the protruding hood and should fit stock headlight rim
NOT sure if I still an 8-5/8 is likely for the mysterious large headlight bucket. Fitment requires the early headlight rims that have a small clip...
Last post
bump still available
- 5 Replies
- 1224 Views
-
Last post by TRDxB2
Sun Mar 24, 2024 1:45 pm
-
-
- 2 Replies
- 349 Views
-
Last post by Karl Von Neumann
Sun Mar 24, 2024 10:42 am
-
-
- 0 Replies
- 168 Views
-
Last post by Karl Von Neumann
Sun Mar 24, 2024 10:42 am
-
-
FS holley carb cores
Replies: 4
by
Karl Von Neumann » Wed Feb 21, 2024 5:02 pm
First post
Holley carb cores decent shape ready for you to restore 50$ea plus the ride located pleasant prairie wisconsin
Last post
Move to top
- 4 Replies
- 877 Views
-
Last post by Karl Von Neumann
Sun Mar 24, 2024 10:24 am
-
-
- 3 Replies
- 362 Views
-
Last post by Karl Von Neumann
Sun Mar 24, 2024 10:23 am
-
-
- 4 Replies
- 654 Views
-
Last post by WorldChamp1914
Sun Mar 24, 2024 1:21 am
-
-
FS WIRE WHEELS (SOLD)
Replies: 1
by
Mark Chaffin » Fri Mar 15, 2024 12:45 pm
First post
Good wire wheels. Seven to choose from. WERE $100 each NOW $75 each. Pick up in Lake Elsinore, CA. Mark Chaffin (951) 805-0928 SOLD
20240315_094152.jpg
Last post
Reduced price! :)
- 1 Replies
- 422 Views
-
Last post by Mark Chaffin
Sun Mar 24, 2024 12:33 am
-
-
FS Reader Distributor on eBay $$$
by
TRDxB2 » Sun Mar 24, 2024 12:07 am
Not Mine - says new & $595 no pictures of what's under the cap. Seller has a few other model T parts
reader really.png
--
--
For comparison
bill rader dizzy.png
- 0 Replies
- 153 Views
-
Last post by TRDxB2
Sun Mar 24, 2024 12:07 am
-
-
- 1 Replies
- 313 Views
-
Last post by Philip Lawrence
Sat Mar 23, 2024 6:52 pm
-
-
FS Original Ford Hard Cover Service Manual SOLD
Replies: 2
by
Humblej » Sat Mar 23, 2024 5:51 pm
First post
For Sale: Original hard cover Ford Service Manual in nice condition. Binding is good, all pages are there and intact with some greasy finger smudges on a few pages. Rear cover has a stain. These original Ford Service Manuals are slightly bigger than the modern paperback reprints, the pictures are much clearer, and the printing slightly larger. $60...
Last post
Sold to Bill pending payment.
- 2 Replies
- 191 Views
-
Last post by Humblej
Sat Mar 23, 2024 6:46 pm
-
-
FS: Wire Wheel Hubcap Wrenches. Buffalo, Dayton, Kissel
Replies: 1
by
WaltM » Mon Mar 18, 2024 11:35 am
First post
For sale wire wheel hubcap wrenches. Dayton wrench (top wrench) measures 2-3/4 between flats. Price $150 plus shipping. Buffalo wrench (middle one) measures 2-3/4 inches between flats. Price $150 plus shipping. Kissel wrench (bottom wrench) measures 2-3/8 inches between flats. Price $150 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt
Last post
To the top
- 1 Replies
- 279 Views
-
Last post by WaltM
Sat Mar 23, 2024 6:24 pm
-
-
FS: Original Anderson timer, Flapper, and Grease.
by
WaltM » Sat Mar 23, 2024 4:49 pm
For sale original Anderson timer, flapper and grease. Timer was disassembled, bead blasted, and painted hi temp clear. Timer has very little wear. Timer is marked Ford and Fordsons Timer comes with extreme pressure grease. Price $100 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt
- 0 Replies
- 218 Views
-
Last post by WaltM
Sat Mar 23, 2024 4:49 pm
-
-
License plates
Replies: 2
by
Dollisdad » Fri Mar 22, 2024 5:07 pm
First post
Looking for a matched pair of 1911 Ohio license plates. Also 1910-11 Torpedo gas tank. Original or repo. Thanks
Last post
I have two.
Will take pics tomorrow.
Text me at 609 nine two 0 9 two two 0.
- 2 Replies
- 429 Views
-
Last post by TheSaintDiscJockey
Sat Mar 23, 2024 4:44 pm
-
-
For Sale: Original Updraft Carburetor Manifold with Linkage
Replies: 2
by
GGZ » Sat Mar 09, 2024 3:15 pm
First post
Here is an original, cast iron, updraft manifold with the L linkage. This is in good condition and is made for a Model T stock block. One of the bolt holes has been enlarged but still works well.
It has an about 1 1/4 bore and a 2 1/2 center to center bolt mounting.
This can be used for Winfield, Miller-Master, Zenith, Model A Ford, etc.
A...
Last post
Still for sale......
- 2 Replies
- 588 Views
-
Last post by GGZ
Sat Mar 23, 2024 4:42 pm
-
-
FS; Original Iron Sediment Bowl
by
WaltM » Sat Mar 23, 2024 4:37 pm
For Sale original iron sediment bowl. Bowl has a good screen and new lead washer. Bowl was disassembled, bead Blasted, and painted. Handle is marked Ford and was assembled with EZ TURN gas resistance grease (also drain valve). All parts have good threads. Price $100 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt
- 0 Replies
- 106 Views
-
Last post by WaltM
Sat Mar 23, 2024 4:37 pm
-
-
- 0 Replies
- 177 Views
-
Last post by fordrelic
Sat Mar 23, 2024 3:39 pm
-
-
FS Stewart Speedometer gear
Replies: 5
by
fordrelic » Sat Feb 17, 2024 9:32 am
First post
For Sale a Stewart speedometer gear. No 24, 9p, 64 T.
Clean it up and ready to go.
$70 includes shipping to lower 48.
speedo gear.jpg
Last post
to the top
- 5 Replies
- 706 Views
-
Last post by fordrelic
Sat Mar 23, 2024 3:36 pm
-
-
For Sale: Brass Nonpareil Horn
by
RadRacer203 » Sat Mar 23, 2024 11:41 am
Very nice original brass horn, the paint is flaking, but I don't see any dents in it aside from some very minor ones around the rim of the screen and overall looks to be in excellent condition. Seems to work fine if you blow through it. Asking $300 plus shipping, make an offer.
20240323_113401.jpg
20240323_113416.jpg
20240323_113425.jpg...
- 0 Replies
- 161 Views
-
Last post by RadRacer203
Sat Mar 23, 2024 11:41 am
-
-
U & J Carburetors for Parts or Rebuild
Replies: 2
by
Rodger Erickson » Sat Mar 23, 2024 10:40 am
First post
FS: An assortment of U&J carburetors and one manifold. Two of the carburetors are in Barn Find condition and are probably rebuildable, one has been modified (more like experimented on, a different venturi and main jet were installed and the idle jet was modified) and the fourth one (the one that's been bead blasted) is probably good for parts...
Last post
Spoken for.
Thanks MTFCA
- 2 Replies
- 173 Views
-
Last post by Rodger Erickson
Sat Mar 23, 2024 11:17 am
-
-
WTB Texas T VW Distributor
Replies: 7
by
J1MGOLDEN » Sun Mar 17, 2024 4:55 pm
First post
My Texas T VW Made in China VW Style Distributor is so worn the points can hardly function and open.
About 20 years ago, I had the same situation and sent the distributor back to Texas Ts for a rebuild.
I got one back that looked and worked like new, but that is no longer an option.
The real Bosch plastic parts are also getting difficult to...
Last post
You might want to consider one of these 123 ignition distributors, they will work 4-15 volts, either rotation and have a programmable advance.
- 7 Replies
- 481 Views
-
Last post by t-time
Sat Mar 23, 2024 10:59 am
-
-
For Sale - Wizard Straight Through Carb
Replies: 6
by
Scott_Conger » Fri Jan 13, 2023 4:51 pm
First post
This is a very clean, as-is carb. When I received it, it was missing the special 4-36 screw for the choke plate, which I made in order to keep the next guy from having to bugger things up.
Whoever I got this from had removed the patent plate and rewired it on. I have removed it so that the carb body may be blasted (if desired) and the plate will...
Last post
Did you ever sell the carb cause I'm interested.
- 6 Replies
- 1368 Views
-
Last post by Texasroadkill
Sat Mar 23, 2024 2:08 am
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum