Classifieds - Parts - Page 2

Classifieds - Parts

New Topic

19797 topics

Page 2 of 198
- Jump to page:
Previous
1
2
3
4
5
…
198
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by love1913 « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

44946 Views

Last post by love1913
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Eisemann Mag.

Last post by DustySpokes « Mon Apr 08, 2024 3:45 pm
Replies: 5
by Model T Matt » Wed Mar 27, 2024 9:05 pm

First post

for sale type M4G6 Mag. found in Box Today asking $250.00 includes shipping call Matt 503-824-268one

Last post

Can someone let the cat out of the Bag and let us know what this mag is supposed to go onto ? -Curious Dusty

5 Replies

714 Views

Last post by DustySpokes
Mon Apr 08, 2024 3:45 pm
TT Closed Cab door check straps

Last post by RajoRacer « Mon Apr 08, 2024 1:06 pm
Replies: 1
by RajoRacer » Sun Apr 07, 2024 11:48 am

First post

I've had several closed cab rigs in the shop for odds & ends repairs and not one had door check straps so I had some done up using the remnants of one using similar webbing material & the length I kinda judged by the door position. These fit original & repro footman loops. I have a limited number of pairs and am asking $25.00 for a pair including...

Last post

BTT - all you closed cab folks have straps ????????

1 Replies

195 Views

Last post by RajoRacer
Mon Apr 08, 2024 1:06 pm
T-2838 Front Wheel Brg. Kit

Last post by Model T Matt « Mon Apr 08, 2024 12:15 pm
Replies: 3
by Model T Matt » Wed Apr 03, 2024 7:10 pm

First post

For sell Complete Front Wheel Brg. Kit for 1909-1927 Model Ts asking $250.00 shipped to your door step call Matt 503-82four-268one

Last post

held for kevin

3 Replies

572 Views

Last post by Model T Matt
Mon Apr 08, 2024 12:15 pm
T-body fs

Last post by CTLeonard « Mon Apr 08, 2024 11:11 am

by CTLeonard » Mon Apr 08, 2024 11:11 am

I have a homemade touring body someone made up. Top and interior it would look pretty darn good. Firewall comes with it. Located in mt.vernon Indiana. Will entertain reasonable offers. Don't amuse me with nickel and dime stuff! ctleonard64@gmail.com IMG_20240408_100052958.jpg IMG_20240408_100037711.jpg IMG_20240408_100152697.jpg...

0 Replies

433 Views

Last post by CTLeonard
Mon Apr 08, 2024 11:11 am
Timing gauge SOLD

Last post by Melba Nolan « Mon Apr 08, 2024 10:35 am
Replies: 4
by Melba Nolan » Sat Sep 23, 2023 9:58 am

First post

For sale: Timing cover gauge with original box. $30 plus postage

20220723_065454.jpg 20220723_065508.jpg

Last post

sold pending payment

4 Replies

665 Views

Last post by Melba Nolan
Mon Apr 08, 2024 10:35 am
19-27 engine splash pan fs

Last post by CTLeonard « Mon Apr 08, 2024 10:17 am

by CTLeonard » Mon Apr 08, 2024 10:17 am

Only have the one. Needs a little work to get smooth again. 25.00 plus shipping. ctleonard64@gmail.com IMG_20240408_091425175.jpg IMG_20240408_091409875.jpg IMG_20240408_091403692.jpg

0 Replies

204 Views

Last post by CTLeonard
Mon Apr 08, 2024 10:17 am
WTB front plate distributor

Last post by JvanMaanen « Mon Apr 08, 2024 10:07 am
Replies: 11
by 38 coupe » Tue Mar 26, 2024 11:10 pm

First post

I am looking for a Bosch front plate. It does not have to have the original distributor. I would also consider an Atwater Kent plate.
Thank you,
Fred

Last post

Fred, the manual/automatic advance has to do with the head used. The non generator unit pictured has the advance operated by a cable from the dash. T units use a bell crank to the control rod. I believe Mark Chaffin still manufactures nice repo Bosch units at a reasonable price. As pointed out in earlier posts, replacement parts for the AK units...

11 Replies

728 Views

Last post by JvanMaanen
Mon Apr 08, 2024 10:07 am
frt. corner bracket

Last post by Melba Nolan « Mon Apr 08, 2024 1:45 am
Replies: 6
by Melba Nolan » Sat Oct 15, 2022 12:59 am

First post

For sale: front corner bracket passenger side. frame bracket near cross member $25 plus postage
20220811_100505.jpg 20220811_100518.jpg

Last post

move to top

6 Replies

1237 Views

Last post by Melba Nolan
Mon Apr 08, 2024 1:45 am
HCCT

Last post by Melba Nolan « Mon Apr 08, 2024 1:37 am
Replies: 2
by Melba Nolan » Mon Feb 05, 2024 11:21 pm

First post

For sale: a very good Allen Electric Co. tester. My Dad used it when he was rebuilding coils. Since he can no longer do that we are going to sell it.

$1500.00 with you picking up

email melbanolan@aol.com or text 314-575-7115 for pioctures

Last post

move to top

2 Replies

707 Views

Last post by Melba Nolan
Mon Apr 08, 2024 1:37 am
FS Macbeth round Healight Lenses

Last post by TRDxB2 « Sun Apr 07, 2024 10:38 pm
Replies: 6
by TRDxB2 » Mon Jun 12, 2023 1:14 am

First post

I prefer PayPal to Family / Friends. Email me if interested with zip code to calculate shipping. Shipping extra
The 8-1/4 lens is flat, without the protruding hood and should fit stock headlight rim

NOT sure if I still an 8-5/8 is likely for the mysterious large headlight bucket. Fitment requires the early headlight rims that have a small clip...

Last post

bump..........

6 Replies

1488 Views

Last post by TRDxB2
Sun Apr 07, 2024 10:38 pm
Ford Puzzle

Last post by Phoenix88R « Sun Apr 07, 2024 9:23 pm
Replies: 3
by Dan Hatch » Thu Apr 04, 2024 2:50 pm

First post

Here is an unusual Norman Rockwell/ Ford puzzle.
The painting these puzzles were made from were made for Ford 50 year anniversary. We all have seen the prints, they were given away to Ford dealers and the dealers gave them away.
They were also made into puzzles.
This one is Henry in his workshop building his first car.
This is also a round...

Last post

There are a couple similar puzzles on eBay. They are rectangular, about $30 including shipping. Look up Henry Ford Puzzle.

3 Replies

622 Views

Last post by Phoenix88R
Sun Apr 07, 2024 9:23 pm
High Speed Ring and Pinion

Last post by Model T Matt « Sun Apr 07, 2024 8:06 pm
Replies: 2
by Model T Matt » Wed Apr 03, 2024 7:01 pm

First post

For Sale T2518/24 HS high speed ring and pinion 39 tooth ring and 13 tooth pinion asking $400.00 shipped to your door step call Matt at 503-82four-268one

Last post

Held pending Payment

2 Replies

645 Views

Last post by Model T Matt
Sun Apr 07, 2024 8:06 pm
Group of Books

Last post by Model T Matt « Sun Apr 07, 2024 7:34 pm
Replies: 3
by Model T Matt » Mon Mar 25, 2024 7:42 pm

First post

For Sale a nice group of Model T Books asking $125.00 for the group shipped to your address-give me a call Matt at 503-82four-268one

Last post

Held For Richard

3 Replies

640 Views

Last post by Model T Matt
Sun Apr 07, 2024 7:34 pm
Bevin Bermuda Bell (SOLD)

Last post by ThreePedalTapDancer « Sun Apr 07, 2024 6:59 pm

by ThreePedalTapDancer » Sun Apr 07, 2024 6:59 pm

Original Bevin Bermuda foot bell. This original Bevin bell is in original used condition. It is a take-off that was stored for a long time. It works nice, very loud DING DONG. No dents, just corrosion on screw plate and many road scratches and wear from being under a car for 100 years. Restore or use as is. 5.5 diameter. 200 shipped....

0 Replies

148 Views

Last post by ThreePedalTapDancer
Sun Apr 07, 2024 6:59 pm
Model T puzzle #2

Last post by Grntea « Sun Apr 07, 2024 6:44 pm
Replies: 1
by Dan Hatch » Sun Apr 07, 2024 4:47 pm

First post

Here is another Rockwell print puzzle. This one is “The Street was Never the Same Again.” It is also from the 50 year prints he did from Ford in1953. It had been opened and I am not sure if all there, but I think they are. You will know when you put it together. $20 + shipping. Email me at address in pictures. Thanks Dan
IMG_3570.jpeg...

Last post

I will buy that! Email sent.

1 Replies

223 Views

Last post by Grntea
Sun Apr 07, 2024 6:44 pm
FS: 16” Steering Wheel

Last post by tselliott « Sun Apr 07, 2024 3:57 pm
Replies: 1
by tselliott » Mon Apr 01, 2024 4:15 pm

First post

This wheel has been sanded and polished. Unfortunately it dropped and cracked, not into two pieces but completely through one area. The crack has been repaired with JB Weld Plastic Bonder and seems as strong as it was before. The spider was bead blasted and painted with epoxy enamel. Overall a decent wheel.
$65 OBO plus shipping.
Scott Elliott...

Last post

$45 OBO plus shipping

1 Replies

356 Views

Last post by tselliott
Sun Apr 07, 2024 3:57 pm
For sale misc parts

Last post by Tim D « Sun Apr 07, 2024 12:00 pm
Replies: 4
by Tim D » Tue Oct 10, 2023 12:21 pm

First post

Water pumps used unknown $20 each plus shipping.

Intakes cast iron used. Make an offer plus shipping.

Last post

Back to the top

4 Replies

992 Views

Last post by Tim D
Sun Apr 07, 2024 12:00 pm
WTB Iron water pump

Last post by Tim D « Sun Apr 07, 2024 11:54 am
Replies: 3
by Bryce S. » Fri Oct 13, 2023 8:17 pm

First post

I am wanting to do away with the aluminum water pump on my T due to it constantly reacting with the iron block and causing that fun chemical reaction that ruins everything. Are there any good iron ones out there that would be a good replacement that one would consider selling me? And yes..... I know everyone thinks I should do it the way Henry...

Last post

Back to the top

3 Replies

405 Views

Last post by Tim D
Sun Apr 07, 2024 11:54 am
For sale 26-27 drive plate lower price SOLD

Last post by Tim D « Sun Apr 07, 2024 11:54 am
Replies: 3
by Tim D » Thu Oct 19, 2023 10:19 am

First post

For sale 26-27 drive plate. Looks to be in good usable condition. May need a new bushing.
$80 plus shipping.

Last post

Back to the top

3 Replies

651 Views

Last post by Tim D
Sun Apr 07, 2024 11:54 am
Pick up only south central WI blocks and parts for sale

Last post by Tim D « Sun Apr 07, 2024 11:53 am
Replies: 2
by Tim D » Tue Nov 14, 2023 3:11 pm

First post

Items for pick up only. A couple of 26 27 blocks one would be great for a ohv motor valve seats are Bad.
Blocks $150 each.
Complete rear end $40 locked up.
Axle half's $20 each.

Hogsheads $15 each.
High Heads $10 each.

Beloit Wisconsin

Last post

Back to the top

2 Replies

754 Views

Last post by Tim D
Sun Apr 07, 2024 11:53 am
For sale TT steering column mount

Last post by Tim D « Sun Apr 07, 2024 11:52 am
Replies: 3
by Tim D » Thu Oct 12, 2023 10:17 am

First post

Nice mount will need new brass bushing. $25 plus shipping. USPS

Last post

Back to the top

3 Replies

453 Views

Last post by Tim D
Sun Apr 07, 2024 11:52 am
Chrome Mirrors

Last post by Model T Matt « Sun Apr 07, 2024 11:18 am
Replies: 3
by Model T Matt » Wed Mar 27, 2024 8:00 pm

First post

For Sale pair of T-17700-C mirrors asking $80.00 for the pair call Matt 503-82four-268one

Last post

Held for George

3 Replies

389 Views

Last post by Model T Matt
Sun Apr 07, 2024 11:18 am
New items

Last post by Melba Nolan « Sat Apr 06, 2024 10:38 pm
Replies: 2
by Melba Nolan » Sun Jan 21, 2024 10:25 pm

First post

For sale: New in package Emergency brake trim 1911-1918 heavy steel $7 plus postage
New in package Windshield rubber $3 plus postage
New in package Shell lacing with rivets $10 plus postage
New high head bolts $2.00 each plus postage I have 15 pieces
New in package hub bolts $2.75 each plus postage 6 x 2.75=$16.50
Drive shaft nuts $2.00 each I...

Last post

move to top

2 Replies

877 Views

Last post by Melba Nolan
Sat Apr 06, 2024 10:38 pm
motor mount new price

Last post by Melba Nolan « Sat Apr 06, 2024 10:38 pm
Replies: 3
by Melba Nolan » Fri Dec 22, 2023 10:41 pm

First post

20230927_141524.jpg 20230927_141458.jpg 20230927_141439.jpg

For sale: Motor mount in very good condition $75 postage included

Last post

move to top

3 Replies

716 Views

Last post by Melba Nolan
Sat Apr 06, 2024 10:38 pm
lower steering column bracket

Last post by Melba Nolan « Sat Apr 06, 2024 10:37 pm
Replies: 4
by Melba Nolan » Wed Nov 22, 2023 6:06 pm

First post

For sale: Lower steering column bracket. In good condition. $25 plus postage

20220806_200732.jpg

Last post

move to top

4 Replies

982 Views

Last post by Melba Nolan
Sat Apr 06, 2024 10:37 pm
locking foot pedal

Last post by Melba Nolan « Sat Apr 06, 2024 10:36 pm
Replies: 1
by Melba Nolan » Mon Feb 05, 2024 8:32 pm

First post

for sale: locking foot pedal for exhaust whistle $10 plus postage

pictures........melbanolan@aol.com or 314-575-7115

Last post

move to top

1 Replies

586 Views

Last post by Melba Nolan
Sat Apr 06, 2024 10:36 pm
worm gear REDUCED PRICE

Last post by Melba Nolan « Sat Apr 06, 2024 10:36 pm
Replies: 4
by Melba Nolan » Sat Dec 23, 2023 10:57 pm

First post

20221120_091937 (1).jpg 20221120_091947 (1).jpg

For sale: worm gear in good condition $150 plus postage

Last post

move to top

4 Replies

892 Views

Last post by Melba Nolan
Sat Apr 06, 2024 10:36 pm
windshield stanchions Reduced price

Last post by Melba Nolan « Sat Apr 06, 2024 10:35 pm
Replies: 6
by Melba Nolan » Thu Nov 03, 2022 4:44 pm

First post

For Sale: very heavy metal stanchions. part #T7846 B with Ford script. $100 ea. plus postage
20221028_150840.jpg 20221028_150709.jpg 20221028_150739.jpg

Last post

move to top

6 Replies

1565 Views

Last post by Melba Nolan
Sat Apr 06, 2024 10:35 pm
FS 1926-26 Canadian Running boards

Last post by EricMac « Sat Apr 06, 2024 9:41 pm
Replies: 3
by EricMac » Mon Apr 01, 2024 8:16 pm

First post

I have a pair of 26-7 Canadian running boards. Both have some wear through so they would be best if you are either ambitious with a welder or if you install step plates. I prefer in person pickup but can box these up and mail them for actual shipping costs.
$150 USD plus shipping 20240401_200157.jpg 20240401_200059.jpg

Last post

Anybody interested at $100 for the pair?

3 Replies

344 Views

Last post by EricMac
Sat Apr 06, 2024 9:41 pm
FOR SALE - BULL DOG HAND PULL FROM THE DRIVERS SEAT CRANK STARTER

Last post by Jay In Northern Ca. « Sat Apr 06, 2024 4:11 pm
Replies: 3
by Jay In Northern Ca. » Sat May 13, 2023 9:59 pm

First post

This is the main appliance for this pull from the dash hand start device. Spring tension keeps the return up and a brake fiction band on the pulley does the grabbing when you pull from the dash.Someone handy should be able to fabricate the missing pieces using the original instruction sheet schematic. Asking $85 plus postage. As a note the...

Last post

This item sold and no the pulley wheel was missing.

3 Replies

1185 Views

Last post by Jay In Northern Ca.
Sat Apr 06, 2024 4:11 pm
FS: More Jno. Brown 1913-1914 Side Lights for Parts

Last post by Rodger Erickson « Sat Apr 06, 2024 2:40 pm

by Rodger Erickson » Sat Apr 06, 2024 2:40 pm

FS: 3 John Brown side lights for parts. Two right side lights with busted glass, one has a steel top, the other has a mangled fount collar. The third light fits the driver side, it's a later one without a jewel but the top is still brass, I believe. Asking $15 each or $40 for the whole pile, shipping not included.

There's also two junk Brown...

0 Replies

296 Views

Last post by Rodger Erickson
Sat Apr 06, 2024 2:40 pm
For Sale: A GREAT Pair of c.1906-1911 Large Brass Sidelamps

Last post by GGZ « Sat Apr 06, 2024 12:22 pm
Replies: 2
by GGZ » Fri Mar 22, 2024 12:06 pm

First post

Here is a great pair of large brass sidelamps that are dated from c.1906 to 1911. These matching lights measure about 11 tall by 6 1/2 diameter of the lens rim. There is a small piece out of the bottom of one of the fonts. One of the burners is missing its knob. Otherwise, these are in good, original condition with very nice, original curved...

Last post

Still for sale.......

2 Replies

459 Views

Last post by GGZ
Sat Apr 06, 2024 12:22 pm
For Sale: 1911-1914 Brass Era Gray and Davis #115 Tail Lamp

Last post by GGZ « Sat Apr 06, 2024 12:21 pm
Replies: 4
by GGZ » Thu Jan 25, 2024 8:13 pm

First post

This Gray and Davis #115 tail lamp is about 9 1/2 tall and is probably from about 1911 to 1914. It is missing the clear side lens, which is easy to make. The body, chimney and font are brass. The door and top are steel. The red lens is in good condition as is the burner assembly. Overall, this is a good, old lamp that can be used for an original...

Last post

Still for sale......

4 Replies

803 Views

Last post by GGZ
Sat Apr 06, 2024 12:21 pm
Dodge bros. Spider fs. Sold

Last post by CTLeonard « Sat Apr 06, 2024 12:12 pm

by CTLeonard » Sat Apr 06, 2024 12:12 pm

Double keyed Dodge spider. 75.00 plus shipping. ctleonard64@gmail.com IMG_20240406_110952241.jpg IMG_20240406_110917566.jpg

0 Replies

365 Views

Last post by CTLeonard
Sat Apr 06, 2024 12:12 pm
Metal firewall fs

Last post by CTLeonard « Sat Apr 06, 2024 11:32 am

by CTLeonard » Sat Apr 06, 2024 11:32 am

In really good shape. Has an extra hole for a switch. 100.00 plus shipping. ctleonard64@gmail.com IMG_20240406_101744021.jpg IMG_20240406_101718462.jpg

0 Replies

323 Views

Last post by CTLeonard
Sat Apr 06, 2024 11:32 am
For Sale Kingston carburetor

Last post by dinosbunny « Sat Apr 06, 2024 10:37 am
Replies: 4
by dinosbunny » Thu Apr 04, 2024 10:48 am

First post

For Sale, Kingston carburetor. Completely dismantled and cleaned, new float seat and needle, new spray needle and painted with gas resistant paint. $130.00 includes shipped to your door in lower 48 states.
king1.jpg
king2.jpg
king3.jpg
king4.jpg

Last post

sold, pending payment, thank you

4 Replies

380 Views

Last post by dinosbunny
Sat Apr 06, 2024 10:37 am
Car rotisserie fs. Sold

Last post by JTT3 « Sat Apr 06, 2024 10:34 am
Replies: 1
by CTLeonard » Sat Apr 06, 2024 10:14 am

First post

Auto twirler pro rotisserie. Purchased years ago and used once by a buddy. Paid 2700.00 but will let go for 1250.00. Too large to ship, will need picked up in mt.vernon Indiana. Has two jigs made for 30-31 model A truck and coupe. ctleonard64@gmail.com IMG_20240406_090618614.jpg IMG_20240406_090646970.jpg IMG_20240406_090546693.jpg...

Last post

That’s a super deal!!!

1 Replies

450 Views

Last post by JTT3
Sat Apr 06, 2024 10:34 am
FS: MOO horn 6 volt *new price*

Last post by rnwilliams « Sat Apr 06, 2024 9:54 am
Replies: 11
by Nate22huckster » Sun Feb 25, 2024 9:44 am

First post

For sale: variable pitch horn, unknown make, operates off of 6 volt and is lever operated. The position of the lever varies the pitch of the horn, cable operated (cable included). This horn was mounted on the drivers side frame rail of my T directly below the drivers seat and the lever was mounted on the back side of the dashboard. Send me a PM...

Last post

Horn was called a Kattle Kaller. It came in 6 and 12 volts. It was made in the 50’s. I have several. They are a lot of fun. Cows will come running when you go down the road and honk it.

11 Replies

1245 Views

Last post by rnwilliams
Sat Apr 06, 2024 9:54 am
For Sale: Klaxonet Electric Horn

Last post by Reno Speedster « Sat Apr 06, 2024 1:59 am
Replies: 4
by Ed Fuller » Sat Mar 02, 2024 8:14 pm

First post

This is a neat Electric Klaxonet horn. Just like a hand operated but electric driven. I hit it real quick with 12 volts and it works. Very loud! The bell looks like it was nickel plated but some has worn off. Appears to be brass underneath.

$100 plus shipping in the U.S.

IMG_3660.jpeg

IMG_3662.jpeg

IMG_3661.jpeg

IMG_3664.jpeg

Last post

If it is 6 volt, I will take it. I will send you an email.

4 Replies

647 Views

Last post by Reno Speedster
Sat Apr 06, 2024 1:59 am
*SOLD* Original 1911 or 1912 Brass Radiator

Last post by 1925 Touring « Fri Apr 05, 2024 10:08 pm
Replies: 2
by NealW » Fri Apr 05, 2024 4:37 pm

First post

I am selling an original late 1911 or 1912 radiator removed from our late 1911 touring car. It does not have rivets on neck, nor the gas tube on the back side of the radiator, so that appears to date it to late 1911 or early 1912.

The brass shell is in really good shape. The radiator does not leak. From the records that came with the car, it...

Last post

Somebody got a deal!

2 Replies

497 Views

Last post by 1925 Touring
Fri Apr 05, 2024 10:08 pm
FS: bells and whistles for your T

Last post by Nate22huckster « Fri Apr 05, 2024 7:40 pm
Replies: 5
by Nate22huckster » Mon Mar 04, 2024 8:21 pm

First post

For sale: bells and whistles, literally! I had these listed separately but having too many separate posts became confusing so here they are on one posting. Take your pick $150 each plus shipping.

Item 1: Bevin brothers Bermuda bell. Nickel plated, mounts on the underside of the floor board and can be either foot or hand operated. When you press...

Last post

All items are sold

5 Replies

996 Views

Last post by Nate22huckster
Fri Apr 05, 2024 7:40 pm
FS: Bevin Bros Bermuda Bell *new price*

Last post by Nate22huckster « Fri Apr 05, 2024 7:39 pm
Replies: 3
by Nate22huckster » Sun Feb 25, 2024 9:37 am

First post

For sale: Bevin Bros. bell, nickel plated. Attaches to your floor board and is foot operated and produces a loud and clear “ding-dong!” Fun accessory for your T. Send me a PM and I can email or text you a video of it in action. $250 plus shipping.

202FD5CC-7E45-49DF-8437-D7E20D7343C7.jpeg

A375425C-D10E-4A1B-AA63-3002A72E69D7.jpeg...

Last post

Bell is sold

3 Replies

711 Views

Last post by Nate22huckster
Fri Apr 05, 2024 7:39 pm
SOLD: Early Brass and Nickel CM Hall Model 5 "Helmet" Tail Light

Last post by GGZ « Fri Apr 05, 2024 4:20 pm

by GGZ » Fri Apr 05, 2024 4:20 pm

SOLD

Here is a very nice, original CM Hall Detroit Model 5 brass and nickel helmet tail light. It measures about 5 1/2 by 5 1/2 by 5 1/2 . This is an electric tail light that would be mounted on a spade bracket. It is in really nice condition with two good lenses (red ribbed and clear), reflector, rim thumbnut, socket, etc. I would date this from...

0 Replies

330 Views

Last post by GGZ
Fri Apr 05, 2024 4:20 pm
Fuel Gauge

Last post by Model T Matt « Fri Apr 05, 2024 3:58 pm
Replies: 3
by Model T Matt » Wed Apr 03, 2024 7:14 pm

First post

Neat NOS Fuel Gauge by AMERICAN GAUGE CO. new in the box has brochure missing fuel line from tank to sender- a neat item to install on ones car asking $120.00 shipped to your door step call Matt 503-82four-268one

Last post

held for Steve

3 Replies

587 Views

Last post by Model T Matt
Fri Apr 05, 2024 3:58 pm
17-22 windshield fs

Last post by CTLeonard « Fri Apr 05, 2024 3:46 pm
Replies: 5
by CTLeonard » Thu Oct 12, 2023 1:17 pm

First post

Nice straight frame including brass glass channel and glass clamps. One of the threads for the stanchions Is split. 200.00 plus shipping. NOW 140.00 plus shipping ctleonard64@gmail.com 16971308328959099168978296654755.jpg 16971308737923748415233730130701.jpg 16971309012998062525251750384297.jpg 16971309245036617995413667290279.jpg...

Last post

Lower price of 140.00 plus shipping

5 Replies

711 Views

Last post by CTLeonard
Fri Apr 05, 2024 3:46 pm
Pull start for a Model T

Last post by DavidGMeier « Fri Apr 05, 2024 3:33 pm
Replies: 19
by DavidGMeier » Tue Jan 17, 2023 1:27 am

First post

WTB - does anyone have a Pull start for a Model T?

Last post

Not yet but I will.

Thanks

19 Replies

2652 Views

Last post by DavidGMeier
Fri Apr 05, 2024 3:33 pm
WTB 1912 Rear End

Last post by CTLeonard « Fri Apr 05, 2024 9:54 am
Replies: 2
by Bill Everett » Thu Apr 04, 2024 4:26 pm

First post

I'd like to buy a 1912 rear end assembly, including a 2-piece drive shaft and radius rods.

Please send a couple of pictures as well as $$ wanted to me at:

My cell is 901-496-8795.

My e-mail is bill.everett@epickett.com

If you have only axle housings, send pictures of them as well.

Thanks.

Bill Everett

Last post

Email sent. ctleonard64@gmail.com

2 Replies

352 Views

Last post by CTLeonard
Fri Apr 05, 2024 9:54 am
WTB machined front hub for speedo

Last post by Larry Debaugh « Fri Apr 05, 2024 9:22 am
Replies: 2
by mklooksup » Thu Apr 04, 2024 7:04 pm

First post

I'm looking for a machined front hub to accommodate a speedometer gear for my McLaren wire wheels.
If someone has one available to sell please let me know.

Thanks

Manny Kourounis

Last post

I have some hubs for a speedometer gear, sent you an email , Larry Debaugh

2 Replies

334 Views

Last post by Larry Debaugh
Fri Apr 05, 2024 9:22 am
WTB Steering Column for 1912

Last post by Scott Rosenthal « Fri Apr 05, 2024 8:18 am
Replies: 24
by Distagon2 » Tue Apr 02, 2024 12:06 pm

First post

Looking for a 1912 Steering Column, preferably complete in restored or decent restorable condition. Contact me at eight zero three, two two six, six four three two. Or email at Distagon2 at aol dot com.

Last post

Hi Greg:
If you intend to drive this car, the later 5:1 steering is recommended. A 26/27 complete column is inexpensive, where this provides you with the 5:1 gears and the upper steering shaft parts. Any non 26/27 lower shaft is easily attached first with all thread, then welded and ground to the cleanup diameter.
Once retrofitted, this safety...

24 Replies

900 Views

Last post by Scott Rosenthal
Fri Apr 05, 2024 8:18 am
WTB - Closed car window opening/lowering straps

Last post by Walt Wise « Fri Apr 05, 2024 6:23 am
Replies: 2
by Walt Wise » Mon Apr 01, 2024 8:54 am

First post

Hoping someone has some old original straps that they would part with, preferably light brown. Maybe, if you did a complete restoration on your car, you might have these still laying around? Let me know what you have and some pics Please. Send me an email or PM through this site. Much Thanks!!! Walt Wise

Last post

Still looking!!!

2 Replies

287 Views

Last post by Walt Wise
Fri Apr 05, 2024 6:23 am
FS: Early Cast-or Forged- Steering Wheel Spiders

Last post by George House « Fri Apr 05, 2024 5:43 am
Replies: 2
by George House » Fri Mar 29, 2024 4:45 pm

First post

Sandblasted and powdercoated glossy black. All 4 ‘arms’ rest evenly on flat surface. Top steering wheel spider has 2 internal keyways opposite each other. Only $75 each + USPS small flat rate box for either or both. 12.5”+- center to center opposite ‘arms’
gwhouse731(at)gmail(dot)com

Last post

Will sacrifice the powdercoated steering wheel spiders for $75 each and 3rd one for $55….

2 Replies

515 Views

Last post by George House
Fri Apr 05, 2024 5:43 am
WTB a model T pull start for my 1919 touring

Last post by DavidGMeier « Fri Apr 05, 2024 1:36 am

by DavidGMeier » Fri Apr 05, 2024 1:36 am

Does anyone have s as working pull start for a model t?

0 Replies

311 Views

Last post by DavidGMeier
Fri Apr 05, 2024 1:36 am
1909-1925 Hall Scott Shifter

Last post by Model T Matt « Thu Apr 04, 2024 10:44 pm
Replies: 3
by Model T Matt » Wed Mar 27, 2024 7:47 pm

First post

Have rebuilt Hall Scott Shifter fits 1909-1925-asking $250.00 includes shipping call Matt 503-82four-268one

Last post

fits a Ruckstell 2 spd rear axle used for shifting slide gear- this has been sold Thanks

3 Replies

653 Views

Last post by Model T Matt
Thu Apr 04, 2024 10:44 pm
Top Saddle.

Last post by RustyFords « Thu Apr 04, 2024 8:28 pm
Replies: 2
by RustyFords » Wed Apr 03, 2024 8:05 pm

First post

Looking for a top saddle for my 24 Touring. One of mine fell off during a drive.

My car is an old patina car, so I’m looking for an old not perfect part…not a new shiny one.

Text me at 281-seven eight seven-8418 or email at rustyfordsATgmail.com

Thanks
Don

Last post

Thanks. :) :)

2 Replies

380 Views

Last post by RustyFords
Thu Apr 04, 2024 8:28 pm
Lunkenheimer brass hand pump F/S

Last post by Layden Butler « Thu Apr 04, 2024 7:24 pm

by Layden Butler » Thu Apr 04, 2024 7:24 pm

All brass Lunkenheimer brand hand pump, works great. $65 including domestic postage.

0 Replies

356 Views

Last post by Layden Butler
Thu Apr 04, 2024 7:24 pm
FS. Nice original 1912/1913set of brass hood latches

Last post by Larry « Thu Apr 04, 2024 4:42 pm
Replies: 1
by Larry » Thu Apr 04, 2024 3:18 pm

First post

Unusual set of brass hood latches that came off a late 1912 early 1913 touring car. These latches are the double ear solid brass latches. Some will argue that they only produced the single ear brass in 1912 and switched to the steel double ear in 1913 but these were the original Latches on the car and they are not reproductions.
Price $100 +...

Last post

Sold,
Thank You,
Larry

1 Replies

334 Views

Last post by Larry
Thu Apr 04, 2024 4:42 pm
How to Unstrangle your Kingston L-4... The New Kingston Super Valve - SOLD OUT

Last post by lochiel « Thu Apr 04, 2024 3:01 pm
Replies: 2
by Scott_Conger » Wed Mar 29, 2023 3:39 pm

First post

A number of folks who expressed an interest in these have failed to follow through, so I am left with a few spares that I did not anticipate having. Contact me through email if you are interested in owning one. There is not an unlimited supply and I am still conflicted as to the real need/demand for these things, so please understand that it is...

Last post

Hi interested in your super valve Any left if so how much? Thanks Jeff Arizonia 775-427-7979 lockwoodeljeff@gmail.com

2 Replies

700 Views

Last post by lochiel
Thu Apr 04, 2024 3:01 pm
Oil Can and Mount.

Last post by RustyFords « Thu Apr 04, 2024 1:37 pm
Replies: 1
by RustyFords » Wed Apr 03, 2024 8:03 pm

First post

I’m looking for a firewall mounted oil can and the associated mount for my 24 Touring. My car is old patina car so I’m looking for an old, yet serviceable part. Not a new shiny one.

Text me at 281-seven eight seven-8418 or email me at rustyfordsATgmail.com

Thanks
Don

Last post

I have one on the way.

Thanks Larry.

1 Replies

503 Views

Last post by RustyFords
Thu Apr 04, 2024 1:37 pm
Brass Era Accessory Dash Clock

Last post by Larry « Thu Apr 04, 2024 12:53 pm
Replies: 1
by Larry » Thu Apr 04, 2024 12:05 pm

First post

This is a beautiful original brass Dash clock made by the New Haven clock company, New Haven, Connecticut. The original porcelain face is in beautiful original condition, as is the brass case. The case measures 4 inches in diameter and is sloped at an angle to face the driver when mounted. The mechanism will need serviced, comes with key.
Price...

Last post

Sold
Thank You,
Larry

1 Replies

327 Views

Last post by Larry
Thu Apr 04, 2024 12:53 pm
Waukesha Ricardo head for a fordson

Last post by milkmanfishn « Thu Apr 04, 2024 11:00 am

by milkmanfishn » Thu Apr 04, 2024 11:00 am

A little off topic, any interest in a Waukesha Ricardo head for a Fordson tractor.
Call or text 262-483-nine 5 two 1. Can send pictures via cell phone.

0 Replies

394 Views

Last post by milkmanfishn
Thu Apr 04, 2024 11:00 am
New batch of Stevens insert ready FS

Last post by Dan Hatch « Thu Apr 04, 2024 10:55 am
Replies: 65
by Dan Hatch » Thu Jun 15, 2023 4:37 pm

First post

Just finished a new run of Upper and Lower Stevens Front Axle Inserts. Sorry, but yes there is a price increase.
Upper Tapered Inserts $4.25 each
Lower Threaded Inserts $6.25 each
All + shipping. Email me at address in the pictures. Thanks Dan
IMG_2391.jpeg
IMG_0598.jpeg
IMG_0260.jpeg

Last post

Back to the top

65 Replies

4533 Views

Last post by Dan Hatch
Thu Apr 04, 2024 10:55 am
FS MODIFIED ENGINE (SOLD)

Last post by Mark Chaffin « Thu Apr 04, 2024 10:44 am
Replies: 5
by Mark Chaffin » Thu Mar 07, 2024 4:41 pm

First post

This engine (August 1926) came out of a recent estate sale. It has new babbit mains and rods. Chevy crank conversion with larger rods. Reground camshaft. Unknown grind. .040 aluminum pistons. Valves were also replaced. Comes with rebuilt transmission, hogshead and a four dip pan. Been sitting for many years and dirty. Will require complete...

Last post

Sold to Scott.

5 Replies

1081 Views

Last post by Mark Chaffin
Thu Apr 04, 2024 10:44 am
26-27 Kevlar Bands

Last post by Model T Matt « Wed Apr 03, 2024 11:49 pm
Replies: 1
by Model T Matt » Wed Apr 03, 2024 7:05 pm

First post

Set of new unopened Kevlar Bands for a 26/27 T asking $120.00 shipped to your door call Matt 503-82four-268one

Last post

sold pending payment

1 Replies

317 Views

Last post by Model T Matt
Wed Apr 03, 2024 11:49 pm
FS Mechanical Ahooga Hand Horn (SOLD)

Last post by ThreePedalTapDancer « Wed Apr 03, 2024 7:59 pm
Replies: 1
by ThreePedalTapDancer » Fri Mar 22, 2024 1:37 pm

First post

Here is a very nice original Handphone made by the Automobile Supply Mfg. Company. It has nice paint and tag. No damage. Works great and is quite loud. Ready to mount and use. 9 inches length. 225 includes shipping.

IMG_0479.jpeg

Last post

This horn was in direct competition with Stewart Warner and others, it is a very nice horn and will be sure to generate interesting conversation at the next meet. Ready to bolt on and use.

1 Replies

400 Views

Last post by ThreePedalTapDancer
Wed Apr 03, 2024 7:59 pm
Coil Box

Last post by Model T Matt « Wed Apr 03, 2024 7:06 pm
Replies: 1
by Model T Matt » Wed Apr 03, 2024 6:58 pm

First post

Needs reworked comes with new hardwood - appears switch body has been repaired in its past includes new repo key asking $75.00 shipped to your location call 503-82four-268one ask for Matt

Last post

Sold Thanks Richard

1 Replies

278 Views

Last post by Model T Matt
Wed Apr 03, 2024 7:06 pm
FOR SALE:1921 TOURING SHEET METAL. AS IS.

Last post by Tom Donnelly « Wed Apr 03, 2024 6:22 pm
Replies: 3
by Tom Donnelly » Sun Oct 29, 2023 2:26 pm

First post

L & R FRONT FENDERS, L & R REAR FENDERS, HOOD, L & R SPLASH APRONS. NO RUNNING BOARDS. NO MOUNTING BRACKETS. AS IS $100. MUST PICK UP IN MID-MISSOURI (COLUMBIA AREA). PLEASE SEND AN EMAIL IF YOU’RE INTERESTED. THANKS!

Last post

Tom, the only item that remains is the hood assbly. If you're interested please contact me at five 7 three eight O eight ten forty.

3 Replies

544 Views

Last post by Tom Donnelly
Wed Apr 03, 2024 6:22 pm
stevens tool

Last post by JTT3 « Wed Apr 03, 2024 10:52 am
Replies: 1
by robertw413 » Wed Apr 03, 2024 2:30 am

First post

in search of a stevens front tool with tap and reamer if you bought one for a job and no longer need it i would like to rent or possibly buy

Last post

Robert it may be easier to take it to someone that will repair your front axle for a fee. No ill will intended but the reamers /taps are so expensive (north of $500 shipped) that if you have the set up you’re a bit particular about their use. A lot of folks with less experience using taps & reamers could ruin a set quickly. Again this is just a...

1 Replies

445 Views

Last post by JTT3
Wed Apr 03, 2024 10:52 am
FS: Reduced Price ! 1915-16 Windshield and Cowl Lamp Brackets

Last post by George House « Wed Apr 03, 2024 9:23 am
Replies: 1
by George House » Sat Mar 30, 2024 12:54 pm

First post

Only $55 plus USPS Medium Flat Rate Box

Last post

Then how about $55 + mailing ?

1 Replies

368 Views

Last post by George House
Wed Apr 03, 2024 9:23 am
FS: Reduced Price ! Ford Metal Rear Window Frame…

Last post by George House « Wed Apr 03, 2024 9:20 am
Replies: 2
by George House » Sat Mar 30, 2024 12:49 pm

First post

…for touring and roadsters. All small machine screws and nuts are there. Will need minor straightening. Only $34 plus the ride. gwhouse731(at)gmail(dot)com

Last post

Then how about $34 + actual mailing ?

2 Replies

285 Views

Last post by George House
Wed Apr 03, 2024 9:20 am
Misc. Parts + Accessories F/S

Last post by jaybee47 « Wed Apr 03, 2024 8:58 am
Replies: 4
by Jeff Perkins » Mon Apr 01, 2024 6:38 pm

First post

All items sold! Thank You MTFCA!

Last post

Jeff. $ on the way. Many thanks. Jay.

4 Replies

714 Views

Last post by jaybee47
Wed Apr 03, 2024 8:58 am
SOLD: Stromberg LF - really cheap ZOOM

Last post by JSteele « Tue Apr 02, 2024 10:35 pm
Replies: 9
by Scott_Conger » Tue Mar 26, 2024 4:49 pm

First post

Complete LF (other than minor items listed below)
not as good as an OF, but not $400, either
'Way better than an NH

complete including the float (and the larger version acorn nut which no one makes)

there's a dent on the inlet which affects nothing, but can be straightened (by you) - can be seen on one picture

missing adjuster retaining...

Last post

Scott sorry I spaced out your parts production.

9 Replies

832 Views

Last post by JSteele
Tue Apr 02, 2024 10:35 pm
For Sale: Model TT Parts (Sold)

Last post by StevenS « Tue Apr 02, 2024 9:26 pm
Replies: 1
by Philip Lawrence » Mon Apr 01, 2024 1:22 pm

First post

I have for sale the following parts:

One TT truck frame $100.00.

One complete rebuilt TT Ruckstell rear axle assembly, includes radius rods, driveshaft, and brake rods $500.00.

One TT Ruckstell rear axle minus radius rods and driveshaft. This was previously listed at $500.00 reduced to $250.00.

Two emergency brake levers $25.00 each.

I'm...

Last post

I wish I was not so far from you.

1 Replies

397 Views

Last post by StevenS
Tue Apr 02, 2024 9:26 pm
SOLD 17 18 coil box

Last post by BarrettR « Tue Apr 02, 2024 8:03 pm
Replies: 3
by Karl Von Neumann » Tue Mar 26, 2024 12:22 pm

First post

Coil box with top for 17 and 18 does need to be rebuilt wood is falling apart. Condition of the switch is unknown no key 50$ plus the ride

Last post

Please email some pics to myhartsdelight2014@yahoo.com

3 Replies

419 Views

Last post by BarrettR
Tue Apr 02, 2024 8:03 pm
FS Hand Crank Siren (SOLD)

Last post by ThreePedalTapDancer « Tue Apr 02, 2024 6:51 pm
Replies: 2
by ThreePedalTapDancer » Sat Mar 16, 2024 3:09 pm

First post

Here is a very nice early hand cranked fire, ambulance or police siren. It is heavy duty, cast aluminum. Precision steel internal gears. Heavy cast steel mounting bracket. Very very loud! Has brass brake button on back to silence it quickly. No serious damage or repairs, just a small nicks here and there on housing. Works great, very clean, and is...

Last post

Video of operation added.

2 Replies

613 Views

Last post by ThreePedalTapDancer
Tue Apr 02, 2024 6:51 pm
Kingston L-4 for parts

Last post by Scott_Conger « Tue Apr 02, 2024 5:12 pm
Replies: 1
by Scott_Conger » Thu Mar 28, 2024 2:08 pm

First post

rusty but not a disaster

what you get:

needle
friction nut
ugly float that will likely work fine
flapper
flapper hinge
throttle and choke shafts and plates
rusty body

what you won't get:
you won't get a bowl

$25 plus actual shipping

EMAIL ME FOR INFO OR ANY KIND OF RESPONSE

IMG_20240328_113118.jpg IMG_20240328_113136.jpg

Last post

Everyone wants a flapper or a flapper hinge until one is actually offered for sale

If I still own this in a week, it's getting pitched

too much junk

too little interest

1 Replies

298 Views

Last post by Scott_Conger
Tue Apr 02, 2024 5:12 pm
For Sale: 3 Holley "G"s parts only - not complete

Last post by Scott_Conger « Tue Apr 02, 2024 5:07 pm
Replies: 1
by Scott_Conger » Thu Mar 28, 2024 1:59 pm

First post

you are looking at: 3 completely stripped cast iron bodied Holley G s

there are no jets
there are no idle tubes
there are no venturis
there are no bowls

they are stripped

you will get:

3 stripped bodies (one modified on the mounting flange)
3 tops
3 needles
3 clamp nuts

they are all pretty clean with little corrosion and for the money, will...

Last post

IF you know who to call, you can find spray needles for $30+
IF you bought these, you'd have $90 worth of needles

If you call any of the suppliers, you can buy adjuster nuts for $3+
if you bought these, you'd have $9 of nuts

I'll burn $20 dollars in fuel to go to town and back take these to the Post Office, so I'm not going to get rich from...

1 Replies

299 Views

Last post by Scott_Conger
Tue Apr 02, 2024 5:07 pm
Sold: Pair of carbs

Last post by Adam « Tue Apr 02, 2024 2:39 pm
Replies: 1
by Adam » Tue Jan 23, 2024 3:21 pm

First post

Sold

These are a matched pair of 1950’s Ford Tractor carbs that would make a good inexpensive dual carb setup on your home made manifold. 2+3/8 bolt centers & 1+1/16 bore. The rebuild kit with gaskets & parts for these is readily available for around $15. The carbs look to be in good condition inside.

$50 includes Free Shipping anywhere inside...

Last post

Carbs are sold

1 Replies

566 Views

Last post by Adam
Tue Apr 02, 2024 2:39 pm
FS Tractor Unit Coils

Last post by Plankhill « Tue Apr 02, 2024 1:40 pm
Replies: 2
by Plankhill » Tue Apr 02, 2024 7:13 am

First post

For Sale: Four Tractor Unit coils in as found condition. $60 for the lot Tractor coils2.jpg Tractor coils.jpg plus $20 postage US only

Last post

Tractor Unit is stamped on the narrow side of the coils.

2 Replies

366 Views

Last post by Plankhill
Tue Apr 02, 2024 1:40 pm
Rear axle Hyatt roller bearings SOLD

Last post by Layden Butler « Tue Apr 02, 2024 12:44 pm
Replies: 3
by Layden Butler » Sun Mar 24, 2024 6:28 pm

First post

Good pair of bearings, tight cages, no pits spalling or other troubles, .003 wear so plenty of life left,

Last post

Good pair of bearings, tight cages, no pits spalling or other troubles, .003 wear so plenty of life left,

3 Replies

619 Views

Last post by Layden Butler
Tue Apr 02, 2024 12:44 pm
FS: Walden 6318 Engine Block/Oil Pan Special Wrench

Last post by NealW « Tue Apr 02, 2024 11:07 am
Replies: 2
by NealW » Sun Mar 31, 2024 8:14 pm

First post

For Sale: A Walden Worcester #6018 9/16” speed wrench with the 6418 attachment that turns this speed wrench into a one man tool for loosening or tightening 9/16 inch size bolts and nuts commonly found on Model T motors. The combination of the two was sold as the #6318 by Waldon (see ad below).

Unlike other speed wrenches of this type, the 6418...

Last post

Sold pending payment

2 Replies

420 Views

Last post by NealW
Tue Apr 02, 2024 11:07 am
FS wood wheel hubs 16 to 27

Last post by Karl Von Neumann « Tue Apr 02, 2024 10:47 am
Replies: 5
by Karl Von Neumann » Thu Mar 14, 2024 10:33 am

First post

Hubs are 40$ea plus the ride I have a ton of them

Last post

Back to top

5 Replies

627 Views

Last post by Karl Von Neumann
Tue Apr 02, 2024 10:47 am
FS: Set Crank and Cam Straight Cut (Spur) Gears

Last post by George House « Tue Apr 02, 2024 9:58 am
Replies: 1
by George House » Fri Mar 29, 2024 4:38 pm

First post

Really Nice condition. I have them in both 1914s and they’re not loud. Designed for pre generator Fords.
Only $90 pr. + USPS small flat rate box.
gwhouse731(at)gmail(dot)com

Last post

No rust on either gears. In deference to my Forum Friends, this is only ***btt*** until this ad falls into obscurity

1 Replies

321 Views

Last post by George House
Tue Apr 02, 2024 9:58 am
30-31 top irons and bows fs

Last post by CTLeonard « Tue Apr 02, 2024 8:40 am
Replies: 2
by CTLeonard » Mon Jan 22, 2024 3:35 pm

First post

Newly fabricated irons as close as I can get them. Had a foundry pour the blocks as Henry did. Also have the individual pieces for those bent ones. The ones everybody grabs hold of to get in! Top bows and header included. The price is 1850.00 plus shipping. Welcome to inquire on separate pieces. These fit the 30-31deluxe roadster...

Last post

Xxxxxxxxxxxx

2 Replies

389 Views

Last post by CTLeonard
Tue Apr 02, 2024 8:40 am
3screw Holley fs

Last post by CTLeonard « Tue Apr 02, 2024 8:37 am
Replies: 1
by CTLeonard » Fri Mar 22, 2024 2:56 pm

First post

Holley pat. 1914 fs. Comes with store bought float and a couple gaskets. Will need a good clean out. 85.00 plus shipping. ctleonard64@gmail.com IMG_20240322_134653423.jpg IMG_20240322_134640602.jpg IMG_20240322_134645861.jpg IMG_20240322_134426145.jpg

Last post

Xxxxxxxxxxxx

1 Replies

312 Views

Last post by CTLeonard
Tue Apr 02, 2024 8:37 am
Bosch Parts

Last post by Model T Matt « Tue Apr 02, 2024 12:05 am
Replies: 3
by Model T Matt » Wed Mar 27, 2024 7:43 pm

First post

Have Gears and Shafts and lock nuts marked Bosch 1 -2 -3-4 asking $220.00 for all shipped to your door call Matt 503-82four-268one

Last post

Parts Have been Sold Thanks

3 Replies

541 Views

Last post by Model T Matt
Tue Apr 02, 2024 12:05 am
Rubes double threaded reed and sleeves SOLD

Last post by JTT3 « Mon Apr 01, 2024 6:51 pm
Replies: 1
by Tbird » Mon Apr 01, 2024 5:49 pm

First post

Here is a Rubes reed that is double threaded. This is correct for late 12-14. The reed is placed on the bulb end.
This came out of an original Rubes rubber bulb.
I think the threads are the 41/64 x27 but could be wrong.
The other sleeve end still has some horn tubing remnants inside.
$30 plus shipping

mikebird@lifeattheridge.net...

Last post

I’ll be your Huckleberry. Thanks

1 Replies

276 Views

Last post by JTT3
Mon Apr 01, 2024 6:51 pm
Hand air pump speedster F/S

Last post by Layden Butler « Mon Apr 01, 2024 6:51 pm

by Layden Butler » Mon Apr 01, 2024 6:51 pm

Original hand air pump from the teens and 1920s, solid brass, plated which could be stripped off. $225, including domestic postage .

0 Replies

305 Views

Last post by Layden Butler
Mon Apr 01, 2024 6:51 pm
Sold Pending Payment:Brass Holley “G” core

Last post by George Hand « Mon Apr 01, 2024 5:00 pm
Replies: 1
by tselliott » Mon Apr 01, 2024 3:55 pm

First post

SOLD Pending Payment
Holley “G” Three-screw top cover plate. “Pat. Dec. 22, 1914” cast in the cover plate. I have not opened it up.
Appears to be a nice solid rebuildable core. Choke and throttle shafts move freely.
$65 OBO plus shipping.
Scott Elliott
971-5O6-94O2

Last post

Steve, I will take that carb!!!! George Hand 13141

1 Replies

219 Views

Last post by George Hand
Mon Apr 01, 2024 5:00 pm
SOLD Brass Side Mirror

Last post by tselliott « Mon Apr 01, 2024 4:29 pm

by tselliott » Mon Apr 01, 2024 4:29 pm

SOLD
Nice mirror in nice shape. I believe this is a reproduction/aftermarket.
$65 OBO plus shipping.
Scott Elliott
971-5O6-94O2

0 Replies

317 Views

Last post by tselliott
Mon Apr 01, 2024 4:29 pm
F/S Hastings Taper Gage NEW Lower price

Last post by Craig Leach « Mon Apr 01, 2024 3:44 pm
Replies: 7
by Craig Leach » Fri Mar 15, 2024 10:46 pm

First post

Period Hastings Taper Gage in box ( box not super great) Absolute Guarantee will replace or repair without charge at any time gage fails to
function is printed on the box. was $100 now $80 Now $75+ the ride. six0two-7six9-0two57 IMG_2991.jpg IMG_2992.jpg
Craig. IMG_3004.jpg

Last post

Hi Jennifer,
There is more combustion pressure & less oil at the top of the cylinder so the rings tend to cause more wear @ the top.
The rings don't travel all the way down the cylinder so there is also less wear @ the bottom Of the cylinder. Excessive
taper will cause the rings to flex & break or not make good contact with the cylinder leading...

7 Replies

764 Views

Last post by Craig Leach
Mon Apr 01, 2024 3:44 pm
FS: Round Gas Tank….

Last post by George House « Mon Apr 01, 2024 2:19 pm

by George House » Mon Apr 01, 2024 2:19 pm

…with brackets. Langs lists new at $360 for 1913-1920 w/o mounting brackets. This is only $100 + new repop gas cap. It has solder repair but I sacrificed 2 gallons of gas in it without a leak. Recommend interior sealing. Local pick up only. gwhouse731(at)gmail(dot)com

0 Replies

352 Views

Last post by George House
Mon Apr 01, 2024 2:19 pm
FS: Depot Hack Plans by Dickens 1982

Last post by Karl Von Neumann « Mon Apr 01, 2024 12:30 pm
Replies: 4
by Rodger Erickson » Sun Mar 31, 2024 4:29 pm

First post

FS a set of woodworking plans for a depot hack, originals by Charles Dickens of Porterville, CA, 1982. Consists of 3 D-size Sheets. Good condition. Asking $10 not including shipping.

tdpth01.jpg

tdpth02.jpg

Thanks for looking!

Last post

Email sent

4 Replies

404 Views

Last post by Karl Von Neumann
Mon Apr 01, 2024 12:30 pm
*SOLD* one piece 3101 B crankcase cover nut plate

Last post by NealW « Mon Apr 01, 2024 12:26 pm
Replies: 1
by NealW » Mon Apr 01, 2024 9:01 am

First post

I was doing some T spare parts spring cleaning this weekend, and I have decided to sell this early one piece crankcase pan inspection cover nut plate ring for sale. One of the pictures shows a possible weld repair at some time in the past.

Priced accordingly at $25, which includes priority mail shipping within the US.

Please contact me using...

Last post

Sold pending payment

1 Replies

296 Views

Last post by NealW
Mon Apr 01, 2024 12:26 pm
WTB….oil filler.

Last post by WorldChamp1914 « Mon Apr 01, 2024 11:22 am
Replies: 9
by WorldChamp1914 » Tue Mar 05, 2024 8:38 pm

First post

Any out there? IMG_4432.png

Last post

Good photo….don’t remember seeing that one before.

9 Replies

1006 Views

Last post by WorldChamp1914
Mon Apr 01, 2024 11:22 am
Hand Pumps

Last post by Model T Matt « Mon Apr 01, 2024 9:38 am
Replies: 2
by Model T Matt » Wed Mar 27, 2024 9:07 pm

First post

have 3 Hand pumps 125.00 for all includes shipping call Matt 503-824-268one

Last post

Pumps held pending payment Thanks

2 Replies

501 Views

Last post by Model T Matt
Mon Apr 01, 2024 9:38 am
T trailer FS

Last post by bryan831daniel « Mon Apr 01, 2024 9:07 am
Replies: 6
by colonelpowers » Sat Mar 30, 2024 4:42 pm

First post

The old trailer is ugly but solid. With different wheels stuck on it I towed it home and it pulled smooth and straight. It comes with an old set more 16 inch rims that have T hubs welded on. I have had them on and they run pretty well. I was going to fix it up but I have enough projects. $300

Last post

Thank you. I’d like to buy it if you’re planning to be there that Friday. PM sent. ~Bryan

6 Replies

810 Views

Last post by bryan831daniel
Mon Apr 01, 2024 9:07 am
Glass Visor for open car FS

Last post by colonelpowers « Sun Mar 31, 2024 9:43 pm
Replies: 4
by colonelpowers » Wed Mar 27, 2024 8:42 pm

First post

This visor came off of an unrestored 26 Touring and was probably only the old car for its entire life. It is in very nice condition and complete with original paint and glass. I can't decide what color the glass actually is. On the car I always thought it was black but looking through it at my shop lights it had a green hue. Either way it is very...

Last post

$250 plus shipping.

4 Replies

662 Views

Last post by colonelpowers
Sun Mar 31, 2024 9:43 pm
F/S Winfield carb model M 201B nice cond.

Last post by Reno Speedster « Sun Mar 31, 2024 8:34 pm
Replies: 1
by spedur » Sun Mar 31, 2024 6:34 pm

First post

nice cond. and complete, barrel turns freely. Includes the ball shaped intake heater with choke. asking $450. contact me for pictures.

Last post

Email sent

1 Replies

343 Views

Last post by Reno Speedster
Sun Mar 31, 2024 8:34 pm
Need parts for JO Brown Carbide Generator

Last post by Mike Lebsack-Iowa « Sun Mar 31, 2024 8:18 pm
Replies: 2
by Serge » Sun Mar 31, 2024 11:32 am

First post

Good morning
I have a Carbide Generator JO Brown all in brass for my T 1909. I am looking for the 2 locks with brass handles, mine are in black painted steel. thumbnail_IMG_4524.jpg

Last post

Sorry, the one’s that I used to make are the reunion/butterfly nut type, all brass.

2 Replies

291 Views

Last post by Mike Lebsack-Iowa
Sun Mar 31, 2024 8:18 pm
W.t.b. Front model t hubs that have been modified for model a wheels please call Ron at 420-220-4744

Last post by Rjackson « Sun Mar 31, 2024 7:02 pm
Replies: 3
by Rjackson » Sun Mar 31, 2024 12:02 pm

First post

Model t hubs that have been modified to take a model a wheels
Call Ron 420-220-4744

Last post

Thanks Craig i will look into all this info.

3 Replies

260 Views

Last post by Rjackson
Sun Mar 31, 2024 7:02 pm

New Topic

19797 topics

Page 2 of 198
- Jump to page:
Previous
1
2
3
4
5
…
198
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum