Post parts wanted or for sale here
-
-
Tips for successful selling on MTFCA classifieds
Replies: 36
by
AdminJeff » Sun Oct 06, 2019 12:30 pm
First post
We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:
- keep your description as clear and concise as possible...
Last post
WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !
- 36 Replies
- 45039 Views
-
Last post by love1913
Fri Jan 05, 2024 1:27 pm
-
-
Hershey stuff
by
Chris Paulsen » Fri Oct 01, 2021 9:30 am
We'll have our usual bunch of random stuff at Hershey. Of particular interest may be a pair 1922 one-piece spindles and a pair of 1911-12 clam-shell rear axle housings with 2-piece driveshaft. The housings and drive shaft need some of the rivets replaced, but are otherwise very good, clean, straight pieces. We're not done packing, and I'm sure...
- 0 Replies
- 814 Views
-
Last post by Chris Paulsen
Fri Oct 01, 2021 9:30 am
-
-
Installing a Warford.
Replies: 6
by
Chris Haynes » Thu Sep 30, 2021 2:48 pm
First post
What is involved with installing one of the new Warford's? Do they come with the shortened driveshaft like the Mitchell's do?
Last post
Yea, but the ending was pretty successful!!!
Thanks to you & your TEAM!!!!!!. The guy saved a few bucks & much of the tour.
We still talk about it. Thanks again on his behalf.
- 6 Replies
- 1438 Views
-
Last post by speedytinc
Fri Oct 01, 2021 8:20 am
-
-
WTB 26/27 Rear Axle Housings
Replies: 4
by
Mark Chaffin » Wed Sep 22, 2021 10:04 am
First post
Looking to purchase a few non-drain plug side 26/27 rear axle housings for our Ruckstell production. The tube and brake flange need to be in good condition. Can pay $10.00 each. Any help appreciated.. Can pick them up at the Tulare Swap Meet. Mark Chaffin (951) 805 0928.
Last post
Yes. For sure! Hoping to pick a few up at Tulare.
- 4 Replies
- 1300 Views
-
Last post by Mark Chaffin
Thu Sep 30, 2021 9:49 pm
-
-
FS Sprint Car Buffalo Wheels, Tires, Hubs/Spindles/Caps
Replies: 2
by
Henry K. Lee » Mon Jun 14, 2021 4:09 pm
First post
Three are 20 with lock rings and one is 21 with lock ring for the right front (old school). $3,200.00 Firm. Pick up only, email or text if interested. Sorry the rear hubs are not shown but are there.
IMG_3595.jpeg
IMG_5672.jpeg
All the Best,
Hank
Last post
XXXXXXXXXX
- 2 Replies
- 1596 Views
-
Last post by Henry K. Lee
Thu Sep 30, 2021 4:46 pm
-
-
- 2 Replies
- 937 Views
-
Last post by Henry K. Lee
Thu Sep 30, 2021 4:34 pm
-
-
- 0 Replies
- 748 Views
-
Last post by Henry K. Lee
Thu Sep 30, 2021 3:08 pm
-
-
For sale oil lamp door hinge pin set
Replies: 1
by
FATMAN » Wed Sep 29, 2021 2:58 pm
First post
A set of 3 brass oil lamp axle pins for the round type oil lamp lens,
special 6.50 a set plus postage
815-633-7244
modelt2001@comcast.net
Bob
Last post
Sorry wrong place
- 1 Replies
- 882 Views
-
Last post by FATMAN
Thu Sep 30, 2021 1:47 pm
-
-
Rajo outside Oil Gauge for sale $180 ppd
Replies: 4
by
Dropacent » Wed Jul 28, 2021 1:25 pm
First post
I have XXXXXXabout 15 XXXX UPDATE, NOW 6 of these left in the drawer. If you have an interest but not ready, just give me a shout and I’ll have miss Connie put your name on one. You can always change your mind with no hard feelings. Never any pressure here. After that, unlikely more will be made by us. Lost another USA foundry, and the core box...
Last post
I'll take one
- 4 Replies
- 1522 Views
-
Last post by Southfork Creek
Thu Sep 30, 2021 1:28 pm
-
-
- 0 Replies
- 667 Views
-
Last post by Henry K. Lee
Thu Sep 30, 2021 12:43 pm
-
-
FS Early Flat Top Fenders.., Pie Wagon or Speedster
by
Henry K. Lee » Thu Sep 30, 2021 12:40 pm
No running boards or hood former, this is for the front and rear fenders and splash aprons. These are early reproductions of the late 1960's/1970's. Never installed, very light surface rust (barn type) which will come off easy with Evapo-Rust. $1,000.00. You collect or will box up at an extra fee, weigh/dimensions sent to you for your shipping...
- 0 Replies
- 692 Views
-
Last post by Henry K. Lee
Thu Sep 30, 2021 12:40 pm
-
-
- 0 Replies
- 613 Views
-
Last post by Gary T
Thu Sep 30, 2021 12:24 pm
-
-
'13 Roadster Body Tin (Available at Hershey)
Replies: 1
by
Steve Davis » Tue Sep 28, 2021 11:21 am
First post
!913 roadster sheet metal, complete with correct turtle deck; wood in turtle deck and door good. Hershey spaces GDF 21-23 near lamp post 84 in front of the Giant Center.
Last post
emailed you about the roadster sheet metal.
- 1 Replies
- 1078 Views
-
Last post by Benji
Thu Sep 30, 2021 12:00 pm
-
-
WTB Hand Crank Coil Tester / FRAUD ALERT
Replies: 16
by
Mark Chaffin » Tue Sep 21, 2021 11:14 pm
First post
Looking to purchase a good HCCT. TOP Loader preferred. Similar to the one shown below.. Will be attending the Tulare swap meet. Thank you. Mark Chaffin (951) 805-0928.
135405.jpg
Last post
Mark, if the coil tester is for a collection of vintage test equipment, good luck in your pursuit. If the goal is to adjust Model T coils for optimal engine performance, you may wish to consider the ECCT coil tester. More information here: www.modeltecct.com
- 16 Replies
- 3324 Views
-
Last post by MKossor
Thu Sep 30, 2021 9:15 am
-
-
NEW 1926/27 Fordor Front Window Regulator Small Gear
Replies: 1
by
henryford2 » Wed Sep 22, 2021 12:25 pm
First post
I water jet cut these specifically for my 1926 Fordor 4 hole front window regulator, they may fit others but I won't have a clue as to which. You may have to dress the teeth slight to make them burr free, but otherwise it's a very nice water jet cut part. Cut from .125 material as the original, they are NOT hardened so they may wear out in the...
Last post
Back to the top, then back on the shelf
- 1 Replies
- 771 Views
-
Last post by henryford2
Thu Sep 30, 2021 7:46 am
-
-
- 3 Replies
- 1293 Views
-
Last post by Schweck1914
Thu Sep 30, 2021 7:18 am
-
-
FOR SALE - 1924 CALIFORNIA LICENSE PLATE MATCHED PAIR
by
Jay In Northern Ca. » Wed Sep 29, 2021 10:51 pm
These plates are in excellent near new shape and just need to be painted the proper colors for the year. I checked them out with DMV a while back and they were clear in the system. Asking $165 plus postage. When painted these go for $350 + from plate Dealers when available.
1924 plates 1.jpg 1924 plates 2.jpg
Please use this email address...
- 0 Replies
- 650 Views
-
Last post by Jay In Northern Ca.
Wed Sep 29, 2021 10:51 pm
-
-
- 1 Replies
- 961 Views
-
Last post by Bill Everett
Wed Sep 29, 2021 10:39 pm
-
-
Early parts at Hershey
by
Larry Debaugh » Wed Sep 29, 2021 9:58 pm
6 rivet rear, 2 piece drive shaft and radius rods $3500, 09/10 steering column w/bracket $1500, Kingston 5 Ball, Holly 4150, Square Hole trans cover, brass lights…. Spaces CM45,46 Larry
- 0 Replies
- 947 Views
-
Last post by Larry Debaugh
Wed Sep 29, 2021 9:58 pm
-
-
- 0 Replies
- 699 Views
-
Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:40 pm
-
-
- 0 Replies
- 692 Views
-
Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:34 pm
-
-
SOLD! EXHAUST WHISTLE SETUP WITH CUTOUT AND KICK PEDAL
by
Jay In Northern Ca. » Wed Sep 29, 2021 5:29 pm
This is a complete setup with a brand new never used exhaust cutout. Asking $225 plus postage for the setup plus postage.
Exhaust Whistle Setup 1.jpg Exhaust Whistle Setup 2.jpg Exhaust Whistle Setup 3.jpg
Please use this email address below and NOT the personal messaging system to contact me, Thanks!
email.jpg
- 0 Replies
- 717 Views
-
Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:29 pm
-
-
- 0 Replies
- 574 Views
-
Last post by Jay In Northern Ca.
Wed Sep 29, 2021 5:12 pm
-
-
Friday Deadline for Hershey Orders
Replies: 1
by
Ashley » Wed Sep 29, 2021 1:46 pm
First post
Finally it is getting closer! Hershey is almost here! We are packing up the trailers, gassing up the trucks. This Friday is the last day for preorders if you need Lang's to bring anything. Just give us a call or email. Otherwise they will see you down there! Happy hunting everyone!
Last post
Finally it is getting closer! Hershey is almost here! We are packing up the trailers, gassing up the trucks. This Friday is the last day for preorders if you need Lang's to bring anything. Just give us a call or email. Otherwise they will see you down there! Happy hunting everyone!
Ashley,
This would be my first year doing so. If I put together...
- 1 Replies
- 891 Views
-
Last post by Retro54
Wed Sep 29, 2021 1:51 pm
-
-
MORE OLD FORD PARTS
Replies: 3
by
RichardG » Tue Sep 28, 2021 11:16 pm
First post
picture #104869 & 70----SET RESTORED 1921 VERMONT PLATES-$75- --- all in picture #104861 $20----- --band link---- hub cap-ford------hub cap ??------oil sight assy-------clear glass dash light lenz -----new gm stop light switch- works with the t.-----all in---picture # 104862 SOLD--three mag plugs-one out side oil plug, --new stop light...
Last post
items in photo 104863---sold, thank you--Shannon--
- 3 Replies
- 1601 Views
-
Last post by RichardG
Wed Sep 29, 2021 1:00 pm
-
-
Parting out my 1921 Touring
Replies: 1
by
Philip Lawrence » Mon Sep 27, 2021 12:04 am
First post
I've decided to part out my 1921 touring project. Disassembly starts tomorrow! If you need something let me know contact me for more information. I plan to sell the body off last unless someone just has to have it sooner.
Last post
Private message sent.
- 1 Replies
- 1133 Views
-
Last post by Chris Haynes
Wed Sep 29, 2021 12:23 pm
-
-
Hershey parts!
Replies: 2
by
bobster1 » Tue Sep 28, 2021 10:07 pm
First post
Hi Folks, Hershey is right around the corner, please come by and visit, I will have Model T Parts, NRS Ford Parts, Curved Dash Olds, some early Buick and other early Brass era things for sale. I have extra chairs, water and conversation!
Regards, Bob Richmon
Last post
Great Chris, look forward to meeting you!
- 2 Replies
- 1205 Views
-
Last post by bobster1
Wed Sep 29, 2021 7:59 am
-
-
WTB Gas Cap Gas Gauge
by
hddennis » Wed Sep 29, 2021 12:43 am
Looking for a period gas tank gas gauge for my 1917 Maxwell. I recently saw one on an unrestored Maxwell that I'm assuming was a period aftermarket accessory and am awaiting more details but thought I'd ask if anyone has one they don't know what it fits. It has a circular clock face with a revolving needle set into the cap. Cap has 1 5/8 female...
- 0 Replies
- 680 Views
-
Last post by hddennis
Wed Sep 29, 2021 12:43 am
-
-
looking for 26 27 radiator in good condition
by
NY John T » Wed Sep 29, 2021 12:22 am
Hi All,
I'm looking to replace my now useless radiator. I would like to find a good, used, NOT leaking radiator for the 26-27. I will be going to Hershey next week on Thursday and can pick it up then if anyone has one. Please contact me here or at: jkillelea@optonline.net
Thanks.
John
- 0 Replies
- 569 Views
-
Last post by NY John T
Wed Sep 29, 2021 12:22 am
-
-
Swap items for sale at HERSHEY!
Replies: 1
by
Bill Kerndt » Tue Sep 28, 2021 4:27 pm
First post
Gentlemen:
I have a list of things that I and a friend will have at Hershey and I thought I would list them and our location in the event you were interested.
I will be adding to this list as time goes by.
We will be in GBL 29, which is the Green Field and we are close to the Giant Center.
1. Model S Coil with 4 Coils (Approx 1908}
2. Simmons...
Last post
I am interested in your model S coil. Sent you an email and a pm
- 1 Replies
- 1140 Views
-
Last post by Grntea
Tue Sep 28, 2021 8:53 pm
-
-
FS Reeder Distributors
Replies: 5
by
Henry K. Lee » Tue Jun 29, 2021 4:27 pm
First post
I have 2 very good used ones with all the parts and instructions ready to install. $240.00 each with shipping in the lower 48. Email if interested.
IMG_5743.jpeg
IMG_5672.jpeg
All the Best,
Hank
Last post
Sold, Thanks MTFCA!
- 5 Replies
- 2209 Views
-
Last post by Henry K. Lee
Tue Sep 28, 2021 6:57 pm
-
-
19-27 Starter Bendix cover and parts
Replies: 2
by
Tbird » Thu Sep 23, 2021 8:03 pm
First post
I have a cover and some bendix parts. One of them has a pulley for a belt and is used, the other is new. The Bendix parts do not look like Ford parts. Someone probably knows more about them than I do.
$10 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_9511.JPG
IMG_9512.JPG
Last post
Thanks will do I’ll just add it to my scrap pile 😂
- 2 Replies
- 961 Views
-
Last post by Tbird
Tue Sep 28, 2021 4:34 pm
-
-
Parts taken off my 14
Replies: 2
by
12chalmers » Tue Sep 21, 2021 4:06 pm
First post
I have replaced the brass radiator, Hood, Texas T water pump and top boot on my 1914 touring. Those parts are for sale. Please email for pictures and price. Jim Williams ewilliam01@msn.com. Thanks
Last post
The Boot and radiator have been sold.
- 2 Replies
- 1517 Views
-
Last post by 12chalmers
Tue Sep 28, 2021 3:26 pm
-
-
SOLD: A Nice Original Ford Script Oil Can
by
GGZ » Tue Sep 28, 2021 2:23 pm
SOLD!
Here is a nice, clean, original example of the popular Ford script oil can. Still has lots of copper plating remaining and the Ford script is nice and sharp.
The price is 65.00 including shipping within the USA.
I accept PayPal for payment.
Please email: motoringicons@hotmail.com or call 734-730-4274. I do not check PMs and probably will...
- 0 Replies
- 744 Views
-
Last post by GGZ
Tue Sep 28, 2021 2:23 pm
-
-
SOLD: Original "Reduce The Gas Tax" License Plate Topper
by
GGZ » Tue Sep 28, 2021 2:20 pm
SOLD!
Here is a neat license plate attachment that I am guessing dates from the 1920s or 1930s. It measures 3 by 11 3/4 . It is in very good original condition with nice original paint. A nice piece of automobilia that would great on any early car.
The price is 65.00 including shipping within the USA.
I accept PayPal for payment.
Please email...
- 0 Replies
- 743 Views
-
Last post by GGZ
Tue Sep 28, 2021 2:20 pm
-
-
- 0 Replies
- 694 Views
-
Last post by Steve Davis
Tue Sep 28, 2021 11:15 am
-
-
Canopy top for TT fs. Sold
by
CTLeonard » Tue Sep 28, 2021 11:04 am
Abe the TT has a canopy top on him he doesn't like, and would like to get rid of. Believe this to be the real deal, some of the stakes have rotted away, but for nothing else it's a great pattern to start with. Has the metal corner brackets.im in mt.vernon in. You would have to pick up.i went through the trouble of getting it off another truck, I'm...
- 0 Replies
- 700 Views
-
Last post by CTLeonard
Tue Sep 28, 2021 11:04 am
-
-
A FEW MORE THE THINGS FORD T
Replies: 1
by
RichardG » Mon Sep 27, 2021 7:57 pm
First post
COIL BOX COVER--$10/ QUICK CHANGE BANDS $45 / FENDER BRACKET LOOKS BAD BUR STILL WILLING-$5/ PLUS SHIPPING, INS IS -UP- TO YOU IF YOU WANT IT,
Last post
COIL BOX LID SOLD, THANK YOU KEVIN--
- 1 Replies
- 1046 Views
-
Last post by RichardG
Tue Sep 28, 2021 8:50 am
-
-
Free: Frame
Replies: 6
by
Philip Lawrence » Sat Sep 25, 2021 8:51 am
First post
I have a 1919 -1920 frame with the forged running board brackets which need to be straightened as they are bent up. The rivets in the front crossmember have been replaced with bolts. If someone can use it they can have it for free. It's located in Auburn, CA . You can call me at 530-five five nine-1440. I also have several very nice frames of...
Last post
Hey there Phil, I haven't seen it. I just looked again.
- 6 Replies
- 1614 Views
-
Last post by Wayne Sheldon
Tue Sep 28, 2021 4:48 am
-
-
21--2-3--4--model t parts
Replies: 1
by
RichardG » Mon Sep 27, 2021 5:15 pm
First post
steering wheel 16 inch fordite, very good,--$25/ WOODEN DASH ? LOW, GOOD SHAPE--$25/ STEEL DASH W BRACKETS V GOOD LOW, $45/ THREE INCH TIRE TOOL, NO IDEA MAKE OFFER, PLUS SHIPPING--INS EXTRA IF--U--WANT IT,
Last post
Hi Richard I would like to purchase the bands if still available. and have a fiend the needs a wood fire wall for his center door if that one is a fit? The Scandinavia ones.
Craig.
602 769 zero two five seven
- 1 Replies
- 966 Views
-
Last post by Craig Leach
Tue Sep 28, 2021 1:29 am
-
-
- 0 Replies
- 660 Views
-
Last post by Mark Gregush
Mon Sep 27, 2021 10:22 pm
-
-
21--2-3--4--model t parts
Replies: 2
by
RichardG » Mon Sep 27, 2021 5:01 pm
First post
BOX FULL OF MODEL T GASKETS, MANIFOLD---HEAD- --TRANSMISSION- -ENGINE----TRANSMISSION RETURN SPRING AND LATCH--$50.00 LOT--/---SMALL BRASS MOTOR METER --$50.00--- ALL--PLUS SHIPPING--INS EXTRA IF -U- WANT IT--
Last post
MOTOR METER AND GASKET SET SOLD--THANK YOU BRAD
- 2 Replies
- 1091 Views
-
Last post by RichardG
Mon Sep 27, 2021 8:41 pm
-
-
License plate bracket WTB
Replies: 1
by
Patrick » Thu Sep 23, 2021 6:56 pm
First post
I am looking for a license plate bracket to use for mounting a right side brake light on my 23 runabout. Please email me if you have one to spare. Edit: I found one at Lang's.
Thanks
Pat Sweeney
Last post
Thanks to those who helped me. I found one at Lang's.
- 1 Replies
- 878 Views
-
Last post by Patrick
Mon Sep 27, 2021 7:55 pm
-
-
U&J carburetor venturi and float
Replies: 2
by
Corey Walker » Mon Sep 27, 2021 4:00 pm
First post
New aluminum venturi and float made from closed cell nitrophyl foam. Screws for float will be included. $45 plus $8.45 USPS flat rate box shipping. Email: wlkma9@gmail.com
Last post
Items are sold.
- 2 Replies
- 873 Views
-
Last post by Corey Walker
Mon Sep 27, 2021 7:48 pm
-
-
Himico Accessory transmission setup F/S
Replies: 2
by
Layden Butler » Sun Jun 20, 2021 2:19 pm
First post
Unrestored but substantially complete Himico brand accessory engine pan and 3 speed transmission with reverse that replaces the Model T planitary transmission. Happy to answer questions and supply more pictures. Asking $950, prefer pick up here in Northern Cal but can get in a box on a pallet and deliver to your area freight arrangement.
Last post
To the top!
- 2 Replies
- 1533 Views
-
Last post by Layden Butler
Mon Sep 27, 2021 6:44 pm
-
-
Antique Clothing PICKED UP
Replies: 2
by
modeltbarn » Wed Sep 22, 2021 10:44 pm
First post
I’ve got a large box of old clothes that my parents wore in the HCCA. Most of these were my moms; she was short, between 5-1 and 5-3, and average size, not heavy at the time. I’d like to pass these on to someone that will use them. Some are true antiques, some are from the 60’s and were made for daytime dresses to wear on tours. There are also...
Last post
These have found a home.
- 2 Replies
- 1428 Views
-
Last post by modeltbarn
Mon Sep 27, 2021 6:18 pm
-
-
Holley Model S float
by
Corey Walker » Mon Sep 27, 2021 3:53 pm
2 screw Holley float made from modern closed cell nitrophyl foam. $15 plus $8.45 shipping USPS flat rate box. Email: wlkma9@gmail.com
- 0 Replies
- 681 Views
-
Last post by Corey Walker
Mon Sep 27, 2021 3:53 pm
-
-
Need transport
Replies: 1
by
T Cruiser » Sun Sep 26, 2021 3:05 pm
First post
I need a rear end minus tube and arms hauled from Ventura to Tulare swap meet. I will pay a $100.00 to anyone willing to bring it to swap meet. Thanks, Ted 503-728-3476
Last post
I found someone to deliver the rear end. Thanks Ted
- 1 Replies
- 767 Views
-
Last post by T Cruiser
Mon Sep 27, 2021 3:26 pm
-
-
Wanted Rajo or Frontenac radiator script
Replies: 4
by
spedur » Thu Sep 23, 2021 10:28 pm
First post
Im looking to buy a Rajo or Frontenac radiator script, or is any one reproducing them ? contact durocar@aol.com
Last post
Yes Steve. Yours is beautiful. I want that too!!
- 4 Replies
- 1214 Views
-
Last post by Southfork Creek
Mon Sep 27, 2021 2:55 pm
-
-
Split Rim Tool #2 FS
Replies: 5
by
Dan Hatch » Sun Sep 12, 2021 2:40 pm
First post
Another Split Rim tool. This one looks to be NOS. This is an Altas, the king of rim tools. $75.00 + shipping. Email me at address in pictures. Thanks Dan
91BEC9BB-F5E5-4E3B-AEAF-24B82C27FFE6.jpeg
8B709499-0A1D-45C9-AC2C-18EE4278D713.jpeg
B4E42AFE-720A-4CEC-A12D-26D1E8C058C2.jpeg
Last post
Sold pending payment. Thanks
- 5 Replies
- 1538 Views
-
Last post by Dan Hatch
Mon Sep 27, 2021 2:52 pm
-
-
Small Drum External Brakes - SOLD
Replies: 3
by
OldFord » Sun Sep 26, 2021 12:05 pm
First post
I have a pair of small drum external Model T brakes for sale. I thought they were AC brand, but now not sure. $75. Will be in Hershey C4Y 34-37. 518-755-0986
Frank
Last post
Those look like APCO
Craig
- 3 Replies
- 1093 Views
-
Last post by Craig Leach
Mon Sep 27, 2021 8:57 am
-
-
For Sale at Hershey
Replies: 1
by
Burlingtontguy » Sun Sep 26, 2021 7:40 pm
First post
What do you need for parts with free delivery to Hershey? Send me an e-mail or Call me at 401-932-3191 so I can load the truck, Thanks, Denis
Last post
Dennis. I sent you an email.
- 1 Replies
- 1036 Views
-
Last post by Dave Young
Mon Sep 27, 2021 6:48 am
-
-
For Sale: Loads of Model T parts
Replies: 6
by
Philip Lawrence » Tue Sep 21, 2021 10:18 pm
First post
After years of collecting parts for different projects that I'll realistically never get to, I've decided to pass these parts on to those that can have a real need for them. Most are chassis parts, frames, front ends, rear ends, engines, and transmissions. There is also a multitude of smaller parts to numerous to mention here.
These parts range...
Last post
Dan, What can I do? She was born under a wandering star. It's really hard to keep up!
- 6 Replies
- 2307 Views
-
Last post by Philip Lawrence
Sun Sep 26, 2021 11:49 pm
-
-
- 0 Replies
- 745 Views
-
Last post by Layden Butler
Sun Sep 26, 2021 3:58 pm
-
-
1926/27 REAR SPRING PERCHES NOS & USED
Replies: 1
by
henryford2 » Tue Sep 21, 2021 3:52 pm
First post
1 NOS 26/27 rear spring perch and two others well used, for a total of 3 perches and pair of bushings. Perhaps from the 3 you can make a usable pair. They are not reproduced. $65 for all 5 pieces (3 perches, 2 bushings) and that includes shipping in the CONUS. Please respond to jandulics@gmail.com...
Last post
Sunday bump to the top, one is NOS and the others repairable (?) NOT being reproduced so originals are your only option!
- 1 Replies
- 924 Views
-
Last post by henryford2
Sun Sep 26, 2021 9:24 am
-
-
Two touring doors For Sale
Replies: 1
by
fordrelic » Sat Sep 18, 2021 3:41 pm
First post
I have a pair of rear touring doors. Good wood also have hardware, $250 plus shipping. model T touring doors 2.jpg model t touring doors.jpg
Last post
Fall is a super time to drive those T's.
- 1 Replies
- 1061 Views
-
Last post by fordrelic
Sun Sep 26, 2021 8:19 am
-
-
Wanted 28x3 tires
Replies: 3
by
FlyingMerkel » Sat Sep 11, 2021 7:17 pm
First post
I am looking for original 28x3 tires. I’m even interested in tires that are falling apart. I bought a nice set on here but they ended up being newer than I needed.
Please call Daniel
831-278-2742
I have email problems so phone calls are preferred.
Last post
Back to the top
- 3 Replies
- 1612 Views
-
Last post by FlyingMerkel
Sun Sep 26, 2021 2:21 am
-
-
Fs 14 engine running $1850
Replies: 3
by
Nv Bob » Wed Sep 08, 2021 11:39 am
First post
Looken sell spare 14 engine that a runner
Babbitt good with shims throughout
Low head narrow nose 3 rivet pan
Trans rebiult
Runs on magneto
Kevlar bands
Has ring gear and has starter hogs head with starter not installed currently
Has good manifolds will need pedals carb timer
Asking 1850 obo
.pickup here or figure shipping uship.com good source...
Last post
Going on tbay
- 3 Replies
- 1798 Views
-
Last post by Nv Bob
Sun Sep 26, 2021 12:49 am
-
-
- 0 Replies
- 727 Views
-
Last post by Layden Butler
Sun Sep 26, 2021 12:01 am
-
-
Mercury/ ford speedster steering column Brkt for sale
Replies: 3
by
Dropacent » Wed Mar 04, 2020 3:17 pm
First post
This is a recast steering column support bracket for the mercury bodied speedster. I built it up for use as a foundry pattern, so it has a lot of bondo on it. They were originally made for the T style diamond shape column. It’ll probably need some work, but a good start if you need it. $40 postage paid to you door. Tmorsher@icloud.com to reach me....
Last post
Thanks Tim. CNC machine here I come.
- 3 Replies
- 2185 Views
-
Last post by Southfork Creek
Sat Sep 25, 2021 10:52 pm
-
-
For Sale: Engines
by
Philip Lawrence » Sat Sep 25, 2021 4:57 pm
I have numerous Engines for sale, all need complete rebuilding. Some are very complete others, not so much. The years include 1916, 1920, 1921 and 1923. You can call: 530-five five nine-1440 for more information.
- 0 Replies
- 906 Views
-
Last post by Philip Lawrence
Sat Sep 25, 2021 4:57 pm
-
-
For Sale: Engines
by
Philip Lawrence » Sat Sep 25, 2021 4:57 pm
I have numerous Engines for sale, all need complete rebuilding. Some are very complete others, not so much. The years include 1916, 1920, 1921 and 1923. You can call: 530-five five nine-1440 for more information.
- 0 Replies
- 695 Views
-
Last post by Philip Lawrence
Sat Sep 25, 2021 4:57 pm
-
-
Wtb JW brown #16 has bonnet
by
Nv Bob » Fri Sep 24, 2021 11:58 pm
Looking to buy or find some to pull a dent out of a nonmetallic
Jw brown model 16 gas headlight
Contact
Bob
Jalopyt@yahoo.com
- 0 Replies
- 683 Views
-
Last post by Nv Bob
Fri Sep 24, 2021 11:58 pm
-
-
WTB T period correct "stop" light
Replies: 3
by
speedy19 » Fri Sep 24, 2021 12:49 pm
First post
I am in search of a Model T period correct red stop light assy. if you can help please PM me.
Thanks Steve
Last post
Sold, thanks !
- 3 Replies
- 1134 Views
-
Last post by Dropacent
Fri Sep 24, 2021 10:35 pm
-
-
SOLD “The oil your motor craves”SOLD
Replies: 2
by
Dropacent » Thu Sep 23, 2021 6:43 pm
First post
Craveroiler SOLD Dandy little accessory for the firewall of your bug. Well made, I’d think swell to keep the top end of that overhead with a little oil, or feed it to your valves through that hole a lot of you have plugged on the intake. Donnie Brown had a big mention of this with his recent resurrection of his original Bug. Tmorsher@icloud.com to...
Last post
Sold, thanks
- 2 Replies
- 1176 Views
-
Last post by Dropacent
Fri Sep 24, 2021 10:00 pm
-
-
For Sale: 1909 - 1913 Rear crossmember SOLD
Replies: 1
by
Philip Lawrence » Fri Sep 24, 2021 9:18 am
First post
This early crossmember is is rusty and pitted but can be saved. You can use this to convert your later frame to the earlier style.$100.00 plus shipping.
Last post
I'll take it.
Thanks Mike
- 1 Replies
- 812 Views
-
Last post by Michael Paul
Fri Sep 24, 2021 8:14 pm
-
-
- 4 Replies
- 1443 Views
-
Last post by roystoy57
Fri Sep 24, 2021 3:24 pm
-
-
Corcoran 1913-14 Headlamps SOLD
Replies: 3
by
Layden Butler » Wed Sep 15, 2021 4:07 pm
First post
Decent readily restored pair of Corcoran black and brass 1913 1914 Headlamps, never rusty, missing one front glass ( plain window glass), the 2 hose connection elbows do not match, one door has 2 cracks, not dented or ever any repairs, glass reflectors are not cracked. SOLD
Last post
Back to the top with lower price!
- 3 Replies
- 1134 Views
-
Last post by Layden Butler
Fri Sep 24, 2021 3:18 pm
-
-
early low Canadian head
by
Joe Bell » Fri Sep 24, 2021 3:04 pm
I have a non script early low T head have been told they where 14's that where casted in Canada, it will not be cheap but if of interest I will haul to Hershey for final inspection.
- 0 Replies
- 786 Views
-
Last post by Joe Bell
Fri Sep 24, 2021 3:04 pm
-
-
NEED 2 HAYES DEMOUNTABLE 30 x 3 1/2 RIMS
Replies: 3
by
avent40 » Fri Sep 24, 2021 6:57 am
First post
Hi everyone, looking for 2 very good rims....hopefully affordable.....I am going to Hershey and can pick them up from you if possible. I appreciate if you can help me out, I am trying to save up and need all new tires and want to do this for the spring. Thanks.
Last post
Be careful in your purchase/ Check for sharp edges on the inner edge of the rimes and elongated bolt holes. Take pictures of what you have - lugs to incase you nee to buy the clamps. I''d even take one for a physical match
- 3 Replies
- 1047 Views
-
Last post by TRDxB2
Fri Sep 24, 2021 2:21 pm
-
-
Set of Four Demountable Wheels, Rims and Tires
Replies: 2
by
Horsehead » Fri Sep 24, 2021 10:40 am
First post
Converted our '26 Roadster to Model A wire wheels, these are the four wheels and tires removed from the car. $450 for all four, you arrange and pay for Fastenal shipping or pick up in Northern Alabama. Have all the spokes, those on rear wheels need to be pressed back into place, front wheels are intact. One clincher rim is from Hayes and another...
Last post
They are not clinchers....definitely a balloon tire rim.
- 2 Replies
- 1108 Views
-
Last post by Ruxstel24
Fri Sep 24, 2021 12:12 pm
-
-
TT Parts To Hershey
Replies: 3
by
OldFord » Fri Sep 24, 2021 10:20 am
First post
I just located 23 TT rear wheels, rims, rings and will have them in Hershey C4Y 34-37. The wheels are solid and have brake drums and wheel locks attached. Extra wheel locks available. Three pairs of rims, one pair good, one pair better, one pair excellent. Also have 4 lock rings for these wheels and one extra rim with a tire on it. Photos...
Last post
Thought I should add photos and pricing:
2 Rear Wheels: Good and solid wood and iron with wheel locks: $200 ea
2 NOS (yes, don't look like they were ever mounted) rear rims: $200 ea
2 Very Good, used rear rims: $150 ea
2 Fair to Good used rear rims: $100 ea
1 Very Good Rim w/Tire: $150
4 Very good rear wheel rings: $50 ea
- 3 Replies
- 1093 Views
-
Last post by OldFord
Fri Sep 24, 2021 11:31 am
-
-
Strobospark Coil Tester
Replies: 3
by
RajoRacer » Sun Aug 22, 2021 1:14 pm
First post
Wasn't somebody wanting to purchase Strobospark coil tester on here a while back ? I heard of one that is available. Post a reply here & I'll respond.
Last post
Apparently it might be inoperative - should be headed to an expert repairman soon - Bob has first dibs if it's repairable.
- 3 Replies
- 1548 Views
-
Last post by RajoRacer
Fri Sep 24, 2021 10:32 am
-
-
Looking for a Ignition switch for a 1923 roadster
Replies: 1
by
chrisb6064 » Wed Sep 22, 2021 4:21 pm
First post
Hi im looking for a ignition switch for a 1923 roadster preferably a number 51 key
Last post
contact BEN MARTIN, Tucker, Georgia, 770 938 3376. he could sell you a super looking and working switch.. He also has fixed over THOUSAND SWITCHES.
- 1 Replies
- 911 Views
-
Last post by SparkTag
Fri Sep 24, 2021 9:40 am
-
-
Nice coil box for sale
Replies: 3
by
Dropacent » Thu Sep 23, 2021 6:39 pm
First post
Real nice solid coil box. I don’t see much in any issues, nice tight wood, latch springs good, lid stays on tight. The lower part has old aged paint, the married lid looks like it had been cleaned and painted at one point. How about $50 to you door, with Uncle Sam getting about $18 of that? Tmorsher@icloud.com...
Last post
thank you !
- 3 Replies
- 1205 Views
-
Last post by donald4ham
Fri Sep 24, 2021 9:28 am
-
-
For Sale: 1914 Steering column SOLD
by
Philip Lawrence » Fri Sep 24, 2021 8:59 am
This column has the Dodge Brothers stamp. The brass quadrant has very good teeth for the spark and gas levers to ride on. The gear box and cover are also in very good condition and just need polishing. The upper right hand hole on the mounting flange has been enlarged and will need welding to repair it. $425.00 plus shipping
- 0 Replies
- 765 Views
-
Last post by Philip Lawrence
Fri Sep 24, 2021 8:59 am
-
-
FS parts
by
Nv Bob » Fri Sep 24, 2021 1:29 am
Can include an outlet and straps
$100+ ship
Brass hub fan and arm $75+ ship
Brake rod supports $2
- 0 Replies
- 775 Views
-
Last post by Nv Bob
Fri Sep 24, 2021 1:29 am
-
-
1911 Gas Tanks
Replies: 1
by
Larry Debaugh » Tue Sep 21, 2021 9:04 pm
First post
2 Available
Clean on the inside
$200 each plus shipping
Can bring to Hershey
Last post
Lighter color tank is sold, other still available, larry
- 1 Replies
- 1097 Views
-
Last post by Larry Debaugh
Thu Sep 23, 2021 9:20 pm
-
-
1916-19 Engine Rebuilt
Replies: 4
by
skeiss » Thu Sep 23, 2021 4:35 pm
First post
FOR SALE
Nicely rebuilt 1916-1919 vintage Model T engine and transmission. .040 over aluminum pistons, new babbit on rods and mains, transmission drums and bands in excellent condition. Starts and runs well. Non-generator set up with starter. This engine was rebuilt as a faux 1913 engine as the serial number and casting date were altered. Has an...
Last post
The engine has been sold pending payment and pickup.
Thank you Perry and MTFCA!
- 4 Replies
- 1289 Views
-
Last post by skeiss
Thu Sep 23, 2021 9:14 pm
-
-
Oil Pressure Gauge
Replies: 2
by
Tbird » Mon Sep 13, 2021 4:50 pm
First post
This is a new Actron G 105 Electrical Oil pressure gauge still in its packaging
$10 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_9444.JPG
IMG_9443.JPG
Last post
$5 plus shipping
- 2 Replies
- 1142 Views
-
Last post by Tbird
Thu Sep 23, 2021 8:04 pm
-
-
- 0 Replies
- 571 Views
-
Last post by rstamand
Thu Sep 23, 2021 7:34 pm
-
-
WTB Spare Tire Carrier for 1919 Roadster - Side Mount
Replies: 4
by
Don D » Wed Sep 22, 2021 11:26 am
First post
Looking for Spare Tire Carrier that is mounted to the driver side running board and top arm bracket for a 1919 Roadster.
Last post
Dennis,
Thanks for the humor however I prefer one that I do NOT have to feed, clean up after and sing to sleep. :-)
The hunt continues!!
Have a great day,
Dom
- 4 Replies
- 1156 Views
-
Last post by Don D
Thu Sep 23, 2021 7:30 pm
-
-
More Stromberg adjuster wells available
by
Scott_Conger » Thu Sep 23, 2021 5:14 pm
While I wait for some metric taps to arrive, I decided to make some more wells today, just to satisfy a couple folks who missed out on my last batch, and to fill up my inventory so that I can box up the tooling for awhile.
As always, I will most certainly respond to EMAIL , not PMs
thanks
IMG_20210912_124519005.png...
- 0 Replies
- 639 Views
-
Last post by Scott_Conger
Thu Sep 23, 2021 5:14 pm
-
-
SOLD: 4 Champion Brass Top Spark Plug Insulators/Cores and 1 Priming Cup Spark Plug
by
GGZ » Thu Sep 23, 2021 3:32 pm
SOLD SOLD SOLD!
Here are four, Champion brass top spark plug insulators. Two are in their original boxes which have 1919 patents dates. They look NOS or hardly used, but I am not positive. Also included is one priming cup spark plug that is in very nice condition.
The price for the group is 125.00 INCLUDING shipping within the USA. Take a look...
- 0 Replies
- 687 Views
-
Last post by GGZ
Thu Sep 23, 2021 3:32 pm
-
-
Model T Frame
Replies: 1
by
T Cruiser » Fri Aug 27, 2021 12:19 am
First post
9-12 Sandblasted and primed; some pitting on inside of one rail. $750.00
Picked up, or free delivery to Tulare Swap Meet.
Ted at 503-728-3476.
Last post
Frame has been sold. Thanks, Ted
- 1 Replies
- 1272 Views
-
Last post by T Cruiser
Thu Sep 23, 2021 1:43 pm
-
-
Wanted to Buy
Replies: 3
by
Mike Lebsack-Iowa » Wed Sep 22, 2021 12:54 pm
First post
Is there a front wheel Timken-bearing race puller made for Model T wheels and if so does anyone have one for sale? I find myself having an ever increasing need for one. Please let me know and much appreciated. Mike 319-fourthirty, 49 ninety five.
Last post
Found this trick don't know if it will work for your needs
By Kenny Edmondson, Indy on Thursday, March 03, 2011 - 07:42 pm:
I figured I'd let everyone in on a way to easily remove the small outer wheel bearing races on the pre 26/27 hubs. The jaws in the current set up won't fit in the later hubs.
I've been using this procedure for awhile. This...
- 3 Replies
- 1354 Views
-
Last post by TRDxB2
Thu Sep 23, 2021 11:43 am
-
-
SOLD demountable rims and wheels ($800)
Replies: 4
by
Howard,Dayton » Sat Sep 18, 2021 6:05 pm
First post
FS, front and rear wheels - perlman ( aftermarket wheel manufacturer?) Very nice shape, Will pack on pallet free- u pay freight.
Last post
,,,,SOLD,,,
- 4 Replies
- 1488 Views
-
Last post by Howard,Dayton
Thu Sep 23, 2021 9:22 am
-
-
26/27 Switch Panels SOLD PP
Replies: 5
by
Dan Hatch » Sun Sep 12, 2021 2:19 pm
First post
Here are some switch panels. Two are 26/27, one is square panel that someone installed a small repro amp meter in. All for ONE money. $49.00 + shipping. Email me at address in pictures. Thanks Dan
9B1985C4-DEB0-4A8B-A091-0A938B095216.jpeg
C19F1B77-7F11-4E7F-9FA5-85EDFBE93749.jpeg
D83AC693-A909-4A36-B185-CAFAC5A61251.jpeg
Last post
Back to the top
- 5 Replies
- 1566 Views
-
Last post by Dan Hatch
Thu Sep 23, 2021 5:53 am
-
-
Hays 30x3-1/2 demountable rim
Replies: 1
by
tselliott » Tue Sep 21, 2021 2:47 pm
First post
This Rim is in decent shape with no sharp edges.
$40 plus shipping.
Scott Elliott
971-5O6-94O2
Last post
That's the one someone was advertising to buy on Sept 19 on this forum.
Allan from down under.
- 1 Replies
- 950 Views
-
Last post by Allan
Thu Sep 23, 2021 4:21 am
-
-
Looking for a wood bed for your roadster??
Replies: 2
by
Angmar » Tue Sep 21, 2021 2:02 pm
First post
I saw this on Epay,
I know there are some looking so I wanted to pass it along. No connection.
Last post
It makes it even harder when you do not have the option to make an offer. My guess is it will not sell at $500, but how do you keep track of it? I would not like to try to replicate all the ironwork for the asking price, but it does seem high when the timberwork needs a total replacement.
Allan from down under.
- 2 Replies
- 1361 Views
-
Last post by Allan
Thu Sep 23, 2021 4:15 am
-
-
- 0 Replies
- 651 Views
-
Last post by roystoy57
Thu Sep 23, 2021 1:25 am
-
-
For Sale: Rebuilt Mag Coil Ring
Replies: 4
by
John Haynes » Sun Sep 19, 2021 7:55 pm
First post
For Sale is a Rebuilt Mag Coil Ring for a car with a starter for 1919-1927. This was rebuilt by Wally Szumouski. I bought this for a project motor and never used. No core required, buy outright for #200.00 plus shipping. Please send an email to me if you would like photos or have any questions.
Last post
Not trying to hijack this thread, but the difference between the US and Canadian units of the same vintage is that the Canadian pole faces are noticeably shorter than on the US castings.
- 4 Replies
- 1493 Views
-
Last post by R.V.Anderson
Wed Sep 22, 2021 8:58 pm
-
-
- 0 Replies
- 607 Views
-
Last post by Philip Lawrence
Wed Sep 22, 2021 5:45 pm
-
-
Bud Vases Clear w/brackets
Replies: 1
by
25tfire » Mon Sep 20, 2021 4:10 pm
First post
Nice set of Bud Vases, clear in color with etching and brackets for mounting. Pictures available on request. $125 plus shipping.
Last post
I am interested in the bud vases. Do you have both mounting brackets? Are there any chips in the glass? Can you send a picture of them to bhb4u@roadrunner.com. Thank you, Bill
- 1 Replies
- 877 Views
-
Last post by Horton
Wed Sep 22, 2021 3:49 pm
-
-
Rands Windshield Hinges SOLD
Replies: 1
by
Tbird » Wed Sep 22, 2021 9:23 am
First post
:x I have 1 complete set of repop brass Rands Type Hinges and 1 original half set of Rands Hinges
$40 plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_9503.JPG
IMG_9504.JPG
IMG_9505.JPG
IMG_9506.JPG
Last post
I will take the hinges. Call me @503 -728-3476 Ted
- 1 Replies
- 728 Views
-
Last post by T Cruiser
Wed Sep 22, 2021 3:22 pm
-
-
SOLD N.O.S. Rear crossmember 1914-25
Replies: 1
by
FATMAN » Fri Sep 17, 2021 11:47 am
First post
Here is a N.O.S. rear crossmember for 1914-25
not pitted, will paint up great, hard to find 125.00 plus postage, 815-633-7244
modelt2001@comcast.net
no p.m.'s please
SOLD
Last post
Back to the top going to t bay soon
- 1 Replies
- 828 Views
-
Last post by FATMAN
Wed Sep 22, 2021 2:06 pm
-
-
#1 Model T Keyboard WITH KEYS new price, $150 ppd
Replies: 8
by
Dropacent » Thu Feb 18, 2021 1:23 pm
First post
UPDATE. Lowered price! STILL AVAILABLE, BUT WITH A VERY LIMITED NUMBER OF FORD SCRIPT KEYS STILL AVAILABLE. THATS $150 FOR JUST THE BOARD OR $300. INCLUDES ONE SET OF NORS KEYS. Tmorsher@icloud.com. Fresh batch available now, WITH AN ADDED OPTION ! . We got into a nice stash of NORS numbered ford keys, and can now offer our boards WITH or WITHOUT...
Last post
New lowered price, $150 ppd
- 8 Replies
- 3614 Views
-
Last post by Dropacent
Wed Sep 22, 2021 1:16 pm
-
-
Misc Tools- SOLD
by
Tbird » Wed Sep 22, 2021 9:31 am
I have here some assortment of tools. Two valve lifters, and some wrenches. Three of the wrenches are marked Ford
$20 for all plus shipping
mikebird@lifeattheridge.net or 574-584-6744
IMG_9507.JPG
IMG_9508.JPG
IMG_9509.JPG
IMG_9510.JPG
- 0 Replies
- 738 Views
-
Last post by Tbird
Wed Sep 22, 2021 9:31 am
-
-
For Sale: 1913 Heinze Coil Box and Four (4) Coils
by
ModelTMark » Tue Sep 21, 2021 11:14 pm
For Sale: 1913 Heinze coil box and four Heinze coils. The box is in very good shape except one splinter under one of the latches (see picture). I have the original latches, though only one shown in the picture. The coils are in excellent shape. Asking $700, but I have some room on the price. A set of four new Heinze coils cost over $800 or best...
- 0 Replies
- 903 Views
-
Last post by ModelTMark
Tue Sep 21, 2021 11:14 pm
-
-
Excellent axle shaft with NOS gears.
Replies: 2
by
Dropacent » Tue Aug 17, 2021 6:56 pm
First post
Offered is a very nice original axle shaft. Going with are 2 axle gears. These are made from the very rare unobtanium metal. One gear is NOS , the second is NOS dimension but has a chip in the middle of a tooth. I don’t think a problem, but I’m throwing it in for free, anyway! So, I think we go with $135 delivered to your door. If you disagree ,...
Last post
The axle shaft should last a long time. Nice looking
Art Mirtes
- 2 Replies
- 1185 Views
-
Last post by Art M
Tue Sep 21, 2021 8:46 pm
-
-
REBUILDING THE FORD POWER PLANT by VIC ZANNIS SOLD
Replies: 2
by
henryford2 » Tue Sep 21, 2021 3:34 pm
First post
80 illustrations. Engine and transmission rebuilding. Tips on modern parts and modifications. Build your own pouring and line boring equipment, plans and measurements included. Spiral bound, soft cover, 75 pages. New book no tears, rips, smudges or writing. $30.00 price includes shipping and NO sales tax. Please respond to this email...
Last post
Rich it's yours
- 2 Replies
- 1013 Views
-
Last post by henryford2
Tue Sep 21, 2021 8:33 pm
Forum permissions
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum