Classifieds - Parts - Page 97

Classifieds - Parts

New Topic

19799 topics

Page 97 of 198
- Jump to page:
Previous
1
…
95
96
97
98
99
…
198
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by love1913 « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

44951 Views

Last post by love1913
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

FS 11-14 orginal headlight forks

Last post by Nv Bob « Tue Aug 31, 2021 3:16 pm

by Nv Bob » Tue Aug 31, 2021 3:16 pm

Set headlight forks 11- early 15 T
1 set availible good threads not rusty junk
$115 to your door
Bob
Jalopyt@yahoo.com

0 Replies

874 Views

Last post by Nv Bob
Tue Aug 31, 2021 3:16 pm
Aluminum door skins -possibly a 1923 T

Last post by 24tcoupe « Tue Aug 31, 2021 2:01 pm

by 24tcoupe » Tue Aug 31, 2021 2:01 pm

I have four aluminum door skins for possibly a 1923 Ford T. All are in relatively good shape. Detailed close up pictures available on request. $65.00 each plus shipping. Will not sell individually.

SOLD

0 Replies

759 Views

Last post by 24tcoupe
Tue Aug 31, 2021 2:01 pm
SOLD FS NEW Rocky Mountain Brake Parts

Last post by MAG « Tue Aug 31, 2021 11:50 am
Replies: 3
by MAG » Mon Aug 30, 2021 8:43 pm

First post

A – Rocky Mountain Brake Equalizer assembly complete. New price is $215 but this one can be yours for $135 and $15 shipping.
B – Rocky Mountain Brake EZ adjust slider. New price is $63 but this one can be yours for $40 and $8 shipping.
C – Rocky Mountain brake rods with clevises for car chassis. New price is $75 but this set can be yours for $45...

Last post

All sold awaiting payment

3 Replies

1015 Views

Last post by MAG
Tue Aug 31, 2021 11:50 am
No longer required- Boa Constrictor Horn

Last post by KiwiFordGuy « Tue Aug 31, 2021 11:41 am
Replies: 1
by KiwiFordGuy » Wed Aug 18, 2021 8:23 am

First post

Ad now no longer required. Thanks MTFCA

Last post

BTT 😅😊 giving it another try. Thanks MTFCA

1 Replies

939 Views

Last post by KiwiFordGuy
Tue Aug 31, 2021 11:41 am
SOLD FS Hassler Shock Set Complete Front & Rear

Last post by MAG « Tue Aug 31, 2021 11:26 am
Replies: 2
by MAG » Mon Aug 30, 2021 8:50 pm

First post

Complete Hassler Shock Set Front and Rear. Painted with epoxy primer and then epoxy black paint. All parts are there and like new. Just need to put them on. $350 and $35 shipping. markpaulagember AT aol DOT com

Last post

sold awaiting payment

2 Replies

968 Views

Last post by MAG
Tue Aug 31, 2021 11:26 am
Front axle rebuild

Last post by Kbillet « Tue Aug 31, 2021 11:11 am
Replies: 1
by Kbillet » Mon Aug 30, 2021 2:57 pm

First post

I’m looking for someone in my general area with a Stevens Tool to rebuild my 11 T front axle. I am in the York,Lancaster, Hershey area of Pennsylvania.
Keith Billet
Wrightsville,PA

Last post

Bump for another look

1 Replies

880 Views

Last post by Kbillet
Tue Aug 31, 2021 11:11 am
SOLD FS NEW Magneto Output Tester by Fun Projects

Last post by MAG « Tue Aug 31, 2021 11:09 am
Replies: 2
by MAG » Mon Aug 30, 2021 8:56 pm

First post

Reproduction of the St. Louis Electric Works magneto tester. Test your magneto output while still in the car regardless of engine speed. New price is $175 but this one can be yours for $125 and $15 shipping. markpaulagember AT aol DOT com

Last post

Item is sold awaiting payment

2 Replies

872 Views

Last post by MAG
Tue Aug 31, 2021 11:09 am
SOLD FS NEW Scandinavia narrow band set

Last post by MAG « Tue Aug 31, 2021 11:03 am
Replies: 1
by MAG » Mon Aug 30, 2021 8:52 pm

First post

Scandinavia coated cotton narrow band set 1909-25. New price is $60 but this set can be yours for $40 and $8 shipping. markpaulagember AT aol DOT com

Last post

Item has been sold

1 Replies

697 Views

Last post by MAG
Tue Aug 31, 2021 11:03 am
SOLD FS NEW AC Brake Set

Last post by MAG « Mon Aug 30, 2021 10:06 pm
Replies: 2
by MAG » Mon Aug 30, 2021 8:46 pm

First post

Accessory brakes for a small drum rear end 1909-25. Must make activation linkage or cables along with welding a tang on the brake pedal to operate the system. New price is $350 but this set can be yours for $225 and $20 shipping. markpaulagember AT aol DOT com

Last post

Item is SOLD

2 Replies

936 Views

Last post by MAG
Mon Aug 30, 2021 10:06 pm
SOLD FS NEW Carbon Brush Timer (TW)

Last post by MAG « Mon Aug 30, 2021 9:56 pm
Replies: 3
by MAG » Mon Aug 30, 2021 8:54 pm

First post

Ford roller timer rebuilt with carbon brush. New price is $84 but this one can be yours for $60 and $8 shipping. Markpaulagember AT aol DOT com

Last post

Item is SOLD

3 Replies

935 Views

Last post by MAG
Mon Aug 30, 2021 9:56 pm
SOLD FS NEW Magneto Meter with mounting bracket

Last post by MAG « Mon Aug 30, 2021 9:44 pm
Replies: 2
by MAG » Mon Aug 30, 2021 8:55 pm

First post

Magneto meter continuously monitors the magneto voltage and comes with the mounting bracket. New price is $40 but this one can be yours for $25 and $8 shipping. markpaulagember AT aol DOT com

Last post

Item is sold

2 Replies

908 Views

Last post by MAG
Mon Aug 30, 2021 9:44 pm
FS NOS rear 23-25 coupe fenders

Last post by Racer_22 « Mon Aug 30, 2021 9:42 pm

by Racer_22 » Mon Aug 30, 2021 9:42 pm

FS NOS 23-25 coupe pair of rear fenders. $500.00
K. Prus
8091 Blue Heron Dr
Canfield, Ohio 44406
Phone 330-Five33-fivesix1six

0 Replies

793 Views

Last post by Racer_22
Mon Aug 30, 2021 9:42 pm
1925 Kentucky license plate

Last post by Tmooreheadf « Mon Aug 30, 2021 8:23 pm
Replies: 4
by Tmooreheadf » Tue Aug 03, 2021 9:53 pm

First post

Looking for a 1925 original license plate for my coupe. One with Jefferson County would be nice but any 1925 KY plate could work.
Thanks
Tom

Last post

I just received a very nice matched set of 25 license plates from Rick. These will do nicely on our coupe and are in amazing original paint.
Thanks Rick for answering the ad and thanks to the MTFCA for this great classified section!

4 Replies

1348 Views

Last post by Tmooreheadf
Mon Aug 30, 2021 8:23 pm
For Sale: Lot of Early Style Engine Mounts

Last post by Ed Fuller « Mon Aug 30, 2021 8:21 pm
Replies: 4
by Ed Fuller » Wed Aug 04, 2021 10:53 pm

First post

Here is a lot of parts for the early style engine mounts. There should be enough parts to put together at least one usable mount. Some of the parts have some pretty heavy pitting and wear. The threads on the u-bolts are pretty worn. One or two look stripped. I could thread a nut on all of them by hand. Everything has been media blasted.

$75 plus...

Last post

Sold
Thank you MTFCA classifieds!

4 Replies

1643 Views

Last post by Ed Fuller
Mon Aug 30, 2021 8:21 pm
For Sale: 1919-1925 spindles

Last post by Ed Fuller « Mon Aug 30, 2021 8:20 pm
Replies: 4
by Ed Fuller » Wed Aug 04, 2021 10:42 pm

First post

Decent set of 1919-1925 spindles. Fresh out of the blast cabinet. Threads are in good shape. They will need new bushings installed. They have some wear from having anti-shimmy springs installed at some point.

$25 plus shipping.

78A8B1AF-F795-4556-9193-E17577461FA4.jpeg

ECD82554-254F-4349-8B30-0C51E8882665.jpeg...

Last post

Sold

Thank you MTFCA classifieds!

4 Replies

1376 Views

Last post by Ed Fuller
Mon Aug 30, 2021 8:20 pm
Where can I buy an ECCT? I need to setup my coils?

Last post by J1MGOLDEN « Mon Aug 30, 2021 7:16 pm
Replies: 6
by Pizman » Fri Aug 27, 2021 7:15 pm

First post

Hello,
I’m looking for an ECCT to purchase, the website says they are out of stock. Does anyone know where I could get one? I really need to setup my coils and unfortunately the only tester I know of is an HCCT in our local museum, which I doubt they would let me use.
Anyone have one for sale?
Thanks.

Last post

DAVE:

YOUR DEVICE WILL TELL A PERSON WHEN THE COIL IS BAD, IF THER ARE NO SPARKS AT ALL.

Your device will no tell a person if the coil is producing random misfires or double sparking.

Your device cannot test the coil with the AC Voltage and Current the way it normally operates.

6 Replies

1740 Views

Last post by J1MGOLDEN
Mon Aug 30, 2021 7:16 pm
Sold hand pressure pump

Last post by Bjerm « Mon Aug 30, 2021 7:16 pm

by Bjerm » Mon Aug 30, 2021 7:16 pm

Nice brass pump I have not messed so condition unknown $100 plus shipping best way to reach me is at bjerm10@gmail.com

0 Replies

838 Views

Last post by Bjerm
Mon Aug 30, 2021 7:16 pm
FS 2 Man Top bows and irons for touring car

Last post by Ruxstel24 « Mon Aug 30, 2021 7:06 pm
Replies: 4
by Ruxstel24 » Mon Aug 09, 2021 11:42 am

First post

I know not the year, but these are in pretty good shape. The wood is solid as well as the steel. One iron is broken where the wood joins at the curve.
See pictures, can send better ones...
$300 for all plus shipping or pick up here in beautiful NE Ohio ! Not too far from the All Ohio, but I unfortunately can’t make it.
Email only hpautorepairdd at...

Last post

Can still get to Marion for the All Ohio

4 Replies

1469 Views

Last post by Ruxstel24
Mon Aug 30, 2021 7:06 pm
FS 1910 Step Plates

Last post by T Cruiser « Mon Aug 30, 2021 5:50 pm
Replies: 2
by T Cruiser » Sun Aug 29, 2021 11:58 pm

First post

Set of four original step plates off my 10 Touring. $60.00 with free shipping to continental US.

Ted at (503)728-3476.

Last post

The step plates are sold

2 Replies

984 Views

Last post by T Cruiser
Mon Aug 30, 2021 5:50 pm
Remy Distributor for parts.

Last post by Rich Eagle « Mon Aug 30, 2021 5:19 pm

by Rich Eagle » Mon Aug 30, 2021 5:19 pm

Remy distributor $45.00 I'll pay shipping in USA or Canada.
The pot metal housing is toast. The cap looks good but has two small cracks. One at the notch and one 180°away. It fit the housing before it cracked and expanded. The rest of the parts look to be usable. The rotor has a small chunk broken out too.
Remy1.jpg
Remy2.jpg
The pot metal has...

0 Replies

751 Views

Last post by Rich Eagle
Mon Aug 30, 2021 5:19 pm
JACK BOSH DIST, SIGHT GLASS--VW--DIST,

Last post by Gene_French « Mon Aug 30, 2021 3:24 pm
Replies: 1
by RichardG » Mon Aug 23, 2021 9:04 pm

First post

-BOSH COMPLETE, VERY GOOD CONDITION,I TOOK IT APART CLEANED IT, 75.00 PLUS SHIPPING. [FOUND A EARLY COIL BOX WITH BRASS TOP COILS, CANT BEAT EM, LOVE THAT SOUND TOO, OIL SIGHT GLASS-GLASS IN GOOD SHAPE, V-W DISTRIBUTOR COMPLETE---35.00---PLUS SHIPPING. BOTH BOSH-DIST AND VW DIST HAVE BEEN SOLD--

Last post

Richard:
sent email regarding Bosch dist. last week ... still available ? Gene French

1 Replies

1113 Views

Last post by Gene_French
Mon Aug 30, 2021 3:24 pm
WANTED: KLAXON HORN

Last post by CraigBothwell « Mon Aug 30, 2021 2:18 pm

by CraigBothwell » Mon Aug 30, 2021 2:18 pm

I am in need of a 'push' operated klaxon horn for my '19 touring.

Craig Bothwell
bothwell.craig@gmail.com
949 500 1636

0 Replies

822 Views

Last post by CraigBothwell
Mon Aug 30, 2021 2:18 pm
FS klaxon horn

Last post by CraigBothwell « Mon Aug 30, 2021 2:04 pm
Replies: 1
by Scottio » Tue Sep 01, 2020 6:18 pm

First post

Klaxon horn. Top lever. Good condition and works good. Pm me for pictures. $200. I can help deliver in So. Cal. Otherwise buyer pays for shipping.

Last post

Is this still available: Craig Bothwell...bothwell.craig@gmail.com

Thanks.

1 Replies

1389 Views

Last post by CraigBothwell
Mon Aug 30, 2021 2:04 pm
WTB - NEW Round Fuel Tank to fit 1914

Last post by speedytinc « Mon Aug 30, 2021 2:03 pm
Replies: 13
by Hudson29 » Fri Aug 27, 2021 12:22 pm

First post

I know this is a long shot but I would like to find a new gas tank for my 1914 Touring. Does anyone have one of these on the shelf that they are willing to part with?

Paul, tank with crap in the bottom

Last post

This tank looked so clean that I thought it WAS clean. Only after some use did the gradoo appear. I just installed a newly overhauled NH done by John at speedytinc. As he recommended, I gave it the upside down suck test before installation which it passed. A test drive revealed that it was acting just the same way the other carby was. It sometimes...

13 Replies

2511 Views

Last post by speedytinc
Mon Aug 30, 2021 2:03 pm
FS Exhaust Whistle with Cut Out

Last post by T Cruiser « Mon Aug 30, 2021 12:46 pm
Replies: 2
by T Cruiser » Mon Aug 30, 2021 12:06 am

First post

Nice original Whistle. $125.00 plus shipping.

Ted at (503) 728-3476

Last post

The Exhaust Whistle & cut out has been sold. Thanks

2 Replies

950 Views

Last post by T Cruiser
Mon Aug 30, 2021 12:46 pm
2 Brass suction guns FS

Last post by Rich Eagle « Mon Aug 30, 2021 12:27 pm
Replies: 4
by Rich Eagle » Fri Aug 27, 2021 4:14 pm

First post

These are brass suction guns for sale. I have left them untouched for display or you may want to clean and polish them. The first one is made by Townsend as shown. 2 1/4 tube dia. and 13 1/2 overall length. I'm asking $45.00 with free shipping in USA or Canada.
Pump.1.jpg
The second has no name for $35.00 with free shipping in USA or Canada. 2...

Last post

2nd pump still for sale.

4 Replies

1375 Views

Last post by Rich Eagle
Mon Aug 30, 2021 12:27 pm
SOLD!!!FS Small Drum Accessory Brakes

Last post by Henry K. Lee « Mon Aug 30, 2021 10:59 am
Replies: 6
by Henry K. Lee » Thu Jul 22, 2021 2:21 pm

First post

Sorry no equalizer, rods, or pedal. Will require outside shoes to be relined. With lined inside shoes and drums, unknown maker. $350.00 with shipping. Email or Text interested.

IMG_5820.jpeg

IMG_5821.jpeg

IMG_5822.jpeg

IMG_5672.jpeg

All the Best,

Hank

Last post

Sold, Thanks MTFCA!

6 Replies

2290 Views

Last post by Henry K. Lee
Mon Aug 30, 2021 10:59 am
WTB coil box switch contacts

Last post by Ruxstel24 « Mon Aug 30, 2021 10:52 am
Replies: 4
by Cevensky » Thu Aug 26, 2021 12:24 am

First post

Hi all,

Looking to buy the bottom contact from early Ford coil box switches that rides on the paddle. Mine broke and I can’t find any to replace it. Will consider buying a trashed whole switch if the price is right. Thanks

Last post

Did Dave get you fixed up Cole ???

I hear nothing....Sgt.Schultz :P
Send me an email if this is what you need.
hpautorepairdd at Gmail dot com
Dave

4 Replies

1098 Views

Last post by Ruxstel24
Mon Aug 30, 2021 10:52 am
wtb motometer

Last post by DanTreace « Mon Aug 30, 2021 10:24 am
Replies: 3
by Jonah D'Avella » Tue Aug 24, 2021 8:03 pm

First post

i am looking for a motermeter, it doesn't need to be pretty, i just need one for some temperature experiments.

Last post

Jonah

That’s a good hint to just use modern temp tool to measure your radiator efficiency.

Here’s a tech on the how-to. Point the tool at the base of the upper metal tank inside the hood to read the hot coolant, then measure the return metal pipe to measure the reduction in coolant temp, that will tell you how efficient or condition of your...

3 Replies

1148 Views

Last post by DanTreace
Mon Aug 30, 2021 10:24 am
WANTED: T-2915 Brass fuel shut off valve for Carb

Last post by avent40 « Mon Aug 30, 2021 9:01 am
Replies: 9
by avent40 » Sat Aug 28, 2021 4:44 pm

First post

Hi, I am looking for a Gasoline shut off brass, vintage style , T-2915 ? Any out there for sale? THanks. It's for the carb not the sediment bulb. It's the old style teardrop handle.

Last post

Thank you for all your continued help, you guys are the best and this Forum is a lifesaver! I was able to get one. God Bless and God Bless America!!

9 Replies

1849 Views

Last post by avent40
Mon Aug 30, 2021 9:01 am
Great misc pile of goodies FOR SALE

Last post by Jonah D'Avella « Mon Aug 30, 2021 8:02 am
Replies: 15
by Dropacent » Fri Feb 14, 2020 1:38 pm

First post

All PRICES ARE POSTPAID TO YOUR DOOR. Happy Valentine’s Day, will you be mine? 2 really pristine Fordson books, $40.01...........original aluminum explosion whistle bell, 2 available $35.37each........4 original hassler pancake shock brass data plates, $40.15..........accessory fan belt guide, $25.09........cutout or whistle pedal,...

Last post

Email sent

15 Replies

4983 Views

Last post by Jonah D'Avella
Mon Aug 30, 2021 8:02 am
FS Exhaust Whistle

Last post by T Cruiser « Mon Aug 30, 2021 12:02 am

by T Cruiser » Mon Aug 30, 2021 12:02 am

Good original whistle. $85.00 plus shipping.

Ted at (503) 728-3476.

0 Replies

790 Views

Last post by T Cruiser
Mon Aug 30, 2021 12:02 am
New Coils 5 FS

Last post by Nv Bob « Sun Aug 29, 2021 11:42 pm
Replies: 1
by Nv Bob » Sat Aug 28, 2021 11:57 pm

First post

These came with a estate lot i purchased
Ran all 5 today seem work ok unknow but cases are great points look NEW all spark great
Asking $40+ post each or take all 5 shipped for $185
Bob
Contact me at
Jalopyt@yahoo.com

Last post

Spoken for pending payment

1 Replies

1010 Views

Last post by Nv Bob
Sun Aug 29, 2021 11:42 pm
Lots of parts FS

Last post by Nv Bob « Sun Aug 29, 2021 11:39 pm

by Nv Bob » Sun Aug 29, 2021 11:39 pm

Open to offers shipping or pickup easier on me better I deal
Rootlieb seats biult Floor seat riser
Undrilled firewall round Ford Script tank with brass filler $750
Brass era speedster hood NEW aluminum $200l
11-14 hood former $125
Monocal brass winshield $250
Small drum ruckstel ds eadiouse rods u joins to axle nuts ready to go NEW bearings and...

0 Replies

967 Views

Last post by Nv Bob
Sun Aug 29, 2021 11:39 pm
Wanted: Gas Shut-Off

Last post by RajoRacer « Sun Aug 29, 2021 10:51 pm
Replies: 12
by RajoRacer » Sat Aug 28, 2021 11:53 am

First post

Anyone happen to have an extra or spare gas shut-off valve as shown ? Apparently, not currently available that I've been able to locate.

Last post

Thanks All - I'm covered ! Cudaman fixed me up !

12 Replies

2194 Views

Last post by RajoRacer
Sun Aug 29, 2021 10:51 pm
Step Bolts (elevator) for Wooden Dashes and Wooden Body Construction

Last post by henryford2 « Sun Aug 29, 2021 8:46 pm
Replies: 3
by henryford2 » Sun Aug 29, 2021 5:26 pm

First post

Step bolts or elevator bolts. (15) 3/8-16 x 3 black oxide, (40) 5/16-18 x 1 black oxide, (35) 1/4-20 x 2 plain steel. 90 pieces total, $50 includes shipping in the CONUS

0FAD7C1D-1EDD-4347-BE39-E74A2D1F8CDE_1_105_c.jpeg
6360B20A-BD9A-4361-8081-4A88EEB3B059_1_105_c.jpeg

Last post

Sold to Richard, thanks!

3 Replies

969 Views

Last post by henryford2
Sun Aug 29, 2021 8:46 pm
Sold headlight forks

Last post by Bjerm « Sun Aug 29, 2021 4:29 pm

by Bjerm » Sun Aug 29, 2021 4:29 pm

Forks $100 plus shipping best way to reach me is bjerm10@gmail.com

0 Replies

866 Views

Last post by Bjerm
Sun Aug 29, 2021 4:29 pm
For Sale: Sight Glass

Last post by T Cruiser « Sun Aug 29, 2021 4:22 pm
Replies: 2
by T Cruiser » Sun Aug 29, 2021 12:16 am

First post

Good condition; glass not broken. $25.00 with free shipping, cont. US.

Ted (503) 728-3476

Last post

The sight glass is sold.

2 Replies

809 Views

Last post by T Cruiser
Sun Aug 29, 2021 4:22 pm
FREE Vintage Ford Magazines

Last post by Richard K « Sun Aug 29, 2021 4:07 pm
Replies: 1
by bronzebeetle » Sun Aug 29, 2021 3:21 pm

First post

No longer available.

Last post

Hi Edward I will pay the postage. Rich

1 Replies

867 Views

Last post by Richard K
Sun Aug 29, 2021 4:07 pm
MORE MORE MORE Stove Bolts/Machine Screws, I've added a bunch more -SAME PRICE

Last post by henryford2 « Sun Aug 29, 2021 3:46 pm
Replies: 3
by henryford2 » Wed Aug 25, 2021 4:13 pm

First post

Approx. 1,000 a (23lb.) assorted unused stove bolts (with square head nuts) in sizes: 3/16 (10-24), 1/2-20 & 5/16-18, in assorted lengths. These are old hardware store inventory and are correct Model T Ford era. Slotted head, not plated, some surface rust. No need for you to buy new hardware and strip the platting! $65 includes shipping in the...

Last post

SOLD, thanks MTFCA

3 Replies

881 Views

Last post by henryford2
Sun Aug 29, 2021 3:46 pm
SOLD : Solid Brass Dog Leg Manifold, $225 Plus Shipping

Last post by Channel1tv « Sun Aug 29, 2021 3:05 pm
Replies: 5
by RichardW » Thu Aug 26, 2021 2:07 pm

First post

SOLD : Solid Brass Dog Leg Manifold, $225 Plus Shipping

Last post

Richard, is it sold I send a email but not reply???
In Clermont FL...just down the street.

5 Replies

1636 Views

Last post by Channel1tv
Sun Aug 29, 2021 3:05 pm
$$130 ppd BUFFINGTON folding auto or camp chair. $130

Last post by Dropacent « Sun Aug 29, 2021 2:37 pm
Replies: 1
by Dropacent » Sat Aug 28, 2021 12:14 pm

First post

These are really neat, a folding auto or camp chair made by buffington. $110 cash delivered to the Ohio jamboree or we will send it for $130 tmorsher@icloud.com. Thanks! 70CDDA3D-9C83-4C2A-8A3F-829CF6DB9714.jpeg C33F3DF6-94D3-4833-BEE4-F9E87D248E4A.jpeg 74568490-D54A-41FB-8238-453659DB3953.jpeg 10D08EAC-203A-4846-8B80-5DB0CC6CD4B5.jpeg...

Last post

Final call, $130 shipped, $105 delivered to Ohio jamboree. Going on eBay later tonight. Thanks!

1 Replies

824 Views

Last post by Dropacent
Sun Aug 29, 2021 2:37 pm
Set engine pans off a 13T

Last post by Nv Bob « Sun Aug 29, 2021 1:00 pm
Replies: 2
by Nv Bob » Sun Aug 29, 2021 12:01 am

First post

These look tobe repops as the tin is nice
These go from the frame rail to the motor
$40+ postage
Bob
Contact me at
Jalopyt@yahoo.com

Last post

Sent reply

2 Replies

936 Views

Last post by Nv Bob
Sun Aug 29, 2021 1:00 pm
Tubes and flaps on sale

Last post by FATMAN « Sun Aug 29, 2021 11:34 am
Replies: 1
by FATMAN » Thu Aug 26, 2021 11:01 am

First post

20 TT Truck flaps 10 @ 35.00 each plus postage
24 30 x 3 flaps 8 @ 30.00 each plus postage
21 metal stem tubes for wire wheels 10@ 40.00 each plus postage
815-633-7244
Bob
modelt2001@comcast.net

Last post

still have a few left

1 Replies

871 Views

Last post by FATMAN
Sun Aug 29, 2021 11:34 am
SATURDAY SWAP MEET

Last post by Mark Chaffin « Sun Aug 29, 2021 11:34 am
Replies: 6
by Mark Chaffin » Sat Aug 28, 2021 3:18 pm

First post

Got plans tomorrow. Didn't want to disappoint anyone on Sunday. Item description, price and shipping as indicated below. Payment by PayPal or check. Message me or call Mark Chaffin (951) 805-0928

Miscellaneous.jpg

1. Excellent steering pitman arm $45.00 plus $8.50 shipping. SOLD
2. Brass metal stems from modern 30x3 1/2 metal stem tubes...

Last post

#1 and #8 sold to Zach.

6 Replies

1715 Views

Last post by Mark Chaffin
Sun Aug 29, 2021 11:34 am
7" carbide spot light FS brass copper

Last post by Nv Bob « Sun Aug 29, 2021 12:55 am

by Nv Bob » Sun Aug 29, 2021 12:55 am

7 brass and copper Saxon search or spotlight great size for T speedster excludes light burner yoke and butterfly mount
Made between 1908-1915
Asking $895

0 Replies

779 Views

Last post by Nv Bob
Sun Aug 29, 2021 12:55 am
Fat man flip wheel FS

Last post by Nv Bob « Sun Aug 29, 2021 12:48 am

by Nv Bob » Sun Aug 29, 2021 12:48 am

Walnut rim aluminum spider locks up tight
Need cosmetic restoration
Asking 295+ postage
Bob
Contact me at
Jalopyt@yahoo.com

0 Replies

881 Views

Last post by Nv Bob
Sun Aug 29, 2021 12:48 am
For Sale: Prestolite Tank

Last post by T Cruiser « Sun Aug 29, 2021 12:22 am

by T Cruiser » Sun Aug 29, 2021 12:22 am

Nice original tank with mounts: $250.00 plus shipping; or free delivery to Tulare.

Ted (503) 728-3476

0 Replies

656 Views

Last post by T Cruiser
Sun Aug 29, 2021 12:22 am
1926 accessory tail light part

Last post by Erik Johnson « Sat Aug 28, 2021 7:44 pm
Replies: 8
by 26tudor » Fri Aug 27, 2021 1:09 pm

First post

I need a clear tag light lens for my accessory tail light.
Thanks
George

Last post

To elaborate on what was posted above, the Ford accessory tail lamp with the STOP stencil behind the upper red lens is the same lamp used on Dodges and 1926-27 six cylinder Hupmobiles.

The differences are as follows:

The Dodge tail lights have DB script on the body. They show up at swap meets and on eBay from time to time and are usually...

8 Replies

1952 Views

Last post by Erik Johnson
Sat Aug 28, 2021 7:44 pm
FS Very Nice Running Board Cooler with Mount

Last post by Henry K. Lee « Sat Aug 28, 2021 7:24 pm
Replies: 2
by Henry K. Lee » Sat Aug 28, 2021 4:46 pm

First post

Keep your drinks cold on the road and look cool too. Has nice patina on the latches, etc. We used it for many years.., $700.00 plus shipping. Email or text.

IMG_5936.jpeg

IMG_5937.jpeg

IMG_5939.jpeg

IMG_5938.jpeg

IMG_5940.jpeg

Last post

Price updated..., current going rate with chrome redone..., $2,000.00.

2 Replies

897 Views

Last post by Henry K. Lee
Sat Aug 28, 2021 7:24 pm
FS Nice Working Fuel Tank Hand Pressure Pump

Last post by Henry K. Lee « Sat Aug 28, 2021 4:40 pm
Replies: 3
by Henry K. Lee » Fri Jun 25, 2021 8:31 pm

First post

Works well, $160.00 plus shipping. Email or Text to the address provided.

IMG_4944.jpeg

IMG_4943 2.jpeg

IMG_5672.jpeg

All the Best,

Hank

Last post

XXXXXXXXXX

3 Replies

1633 Views

Last post by Henry K. Lee
Sat Aug 28, 2021 4:40 pm
FS Early Door Latches

Last post by Henry K. Lee « Sat Aug 28, 2021 4:39 pm
Replies: 3
by Henry K. Lee » Fri Jun 25, 2021 8:28 pm

First post

Both for $200.00 plus shipping. Email or Text to address provided.

IMG_4934.jpeg

IMG_4935.jpeg

IMG_5672.jpeg

All the Best,

Hank

Last post

$150.00 with shipping.

Hank

3 Replies

1388 Views

Last post by Henry K. Lee
Sat Aug 28, 2021 4:39 pm
1911-16 Tie Rod Bolts NOS SOLD

Last post by Layden Butler « Sat Aug 28, 2021 4:31 pm
Replies: 1
by Layden Butler » Wed Jul 07, 2021 2:18 pm

First post

New Old Stock bolts for ends of the tie rod, as used 1911 thru 1916 with threaded hole on top for brass oiler, for the purist!

Last post

One last pair available!

1 Replies

1106 Views

Last post by Layden Butler
Sat Aug 28, 2021 4:31 pm
Dyke's Encyclopedia 1913-1914 SOLD

Last post by Layden Butler « Sat Aug 28, 2021 4:29 pm
Replies: 2
by Layden Butler » Sat Jul 31, 2021 2:24 pm

First post

The unsurpassed Dykes Automobile Encyclopedia, famous for 557+ pages of great reading ( it is 2 thick). Early 3rd Edition (1913-1914) very different from later editions it does not have a dedicated Model T Ford section but does have info on Model T's scattered thru, carburetors, general engineering, ignition, tires and wheels, magnetos. and on and...

Last post

Still available in case you missed it first time around!

2 Replies

1027 Views

Last post by Layden Butler
Sat Aug 28, 2021 4:29 pm
1909 1913 2 piece driveshaft F/S

Last post by Layden Butler « Sat Aug 28, 2021 4:27 pm
Replies: 2
by Layden Butler » Wed Aug 04, 2021 4:21 pm

First post

Ball for 1909 ( note small diameter oil hole) and section of torque tube 1909-1913, both nice originals, tube has been cut off but would make perfect shortened tube to use a driveshaft transmission at the rear and retail your clamshell rear axle housings for show! $450 pair

Last post

$395 for the pair

2 Replies

1355 Views

Last post by Layden Butler
Sat Aug 28, 2021 4:27 pm
Running board GAS OIL WATER set F/S

Last post by Layden Butler « Sat Aug 28, 2021 4:25 pm
Replies: 2
by Layden Butler » Sun Aug 15, 2021 3:49 pm

First post

$295 packaging included!

Last post

Back to the top!

2 Replies

1109 Views

Last post by Layden Butler
Sat Aug 28, 2021 4:25 pm
SOLD Running board battery/ tool box SOLD

Last post by Dropacent « Sat Aug 28, 2021 3:19 pm
Replies: 3
by Dropacent » Sat Aug 28, 2021 12:08 pm

First post

SOLD ! This is just how this one came to me. It’s a nice size running board battery or tool box. Has the installed metal grommet for cable. The brass handle on top is early, and nice. Not sure if it was born with the handle but could be. In primer, pretty straight and no big rust issues. We can hand off at the Ohio Jamboree for a hundred dollar...

Last post

Sold, thanks!

3 Replies

816 Views

Last post by Dropacent
Sat Aug 28, 2021 3:19 pm
FS ODDS AND ENDS

Last post by Mark Chaffin « Sat Aug 28, 2021 3:09 pm

by Mark Chaffin » Sat Aug 28, 2021 3:09 pm

Item description, price and shipping as indicated below. Payment by PayPal or check. Message me or call Mark Chaffin (951) 805-0928. Thank you. :)

Taillight License Bracket.jpg
15-19 Touring tail light / license plate bracket. Retail $51.95. This one $30.00 plus $15.50 shipping.

Demountable Band Set.jpg
Ford demountable band set (09-25)....

0 Replies

788 Views

Last post by Mark Chaffin
Sat Aug 28, 2021 3:09 pm
SOLD Lizzies girdle , SPECIAL MODEL SOLD

Last post by Dropacent « Sat Aug 28, 2021 2:13 pm
Replies: 2
by Dropacent » Sat Aug 28, 2021 12:19 pm

First post

we formerly made these Lizzie Girdles for years, but that has been taken over by a young man who is doing well with them. This is a special one I had hanging around here for a project that isn’t going to happen. This has solid arms on the side, and is powdercoated red. Great for that flashy speedster project or if you just want to show off that...

Last post

SOld, thanks!

2 Replies

719 Views

Last post by Dropacent
Sat Aug 28, 2021 2:13 pm
I'm Back with More Surplus Parts - Make Offer! :)

Last post by CudaMan « Sat Aug 28, 2021 12:54 pm
Replies: 11
by CudaMan » Mon Mar 29, 2021 5:56 pm

First post

Wow, this old thread got resurrected, so I figured I'd better update the image and descriptions. :)

I made another pass through my accumulation of parts that I accumulated but won't be using. Some you've seen before, others are new additions.

If you're interested in any of them, feel free to PM or email me with an offer. I will reply with either...

Last post

Wow, I thought this thread had sunk into oblivion long ago, thanks for resurrecting it!

Sorry Keith, Item B (the Prestolite tank and decal) are already sold.

Also, Item M (the exhaust heater shroud) is also sold.

11 Replies

3241 Views

Last post by CudaMan
Sat Aug 28, 2021 12:54 pm
For Sale 3 Firestone 30 x 3 1/2 wheels 5 lug

Last post by FATMAN « Sat Aug 28, 2021 9:32 am
Replies: 3
by FATMAN » Fri Aug 27, 2021 2:32 pm

First post

These are hard to find
Firestone 30 x 3 1/2 wheels 5 lug
3 wheels all for 150.00 plus postage
815-633-7244
or local pick up, Bob
modelt2001@comcast.net

Last post

yes 5 lug, sorry, Bob

3 Replies

1103 Views

Last post by FATMAN
Sat Aug 28, 2021 9:32 am
Winfield S & SR carburetor parts **NEW**

Last post by Kevin Pharis « Fri Aug 27, 2021 11:56 pm
Replies: 14
by Kevin Pharis » Fri Sep 18, 2020 9:37 pm

First post

Brand new Winfield model S & SR carburetor choke horns, V band clamps, and choke brackets now available. All components are near exact reproductions of the original designs and will interchange with original components. Current available size is AA-B only. Other sizes to be available depending upon demand....

Last post

Continuing to make progress, now have new float bowl covers complete with ball detents, new float levers, and Viton tipped float needles

CBB448A7-E2A7-44CD-B03F-4E5D0FA3C19B.jpeg
5241236A-61B6-4584-B9D9-74C612666D57.jpeg

And here’s a pic of progress so far, still have some cosmetic work to do to the exterior of the throttle barrel, but...

14 Replies

4210 Views

Last post by Kevin Pharis
Fri Aug 27, 2021 11:56 pm
For Sale: Model T Prestolite Running Board Acetylene Tank

Last post by WillieT « Fri Aug 27, 2021 11:49 pm
Replies: 2
by Junkyard4 » Sat Dec 21, 2019 1:27 pm

First post

For sale: Model T Prestolite Running Board Acetylene Tank. Rough condition but good for a non working display piece and I’m only asking $10. I’m pretty sure this is not allowed to be shipped. Pick up in Libertyville Illinois 60048 about 35 miles north of Chicago call or text 224-223-7464

2D1BC4D1-4581-41C3-A44A-1C0FD8CA0958.jpeg...

Last post

Do you still have this tank? I’m not far away from you.

2 Replies

1957 Views

Last post by WillieT
Fri Aug 27, 2021 11:49 pm
13-25 running boards fs. Sold

Last post by CTLeonard « Fri Aug 27, 2021 3:55 pm

by CTLeonard » Fri Aug 27, 2021 3:55 pm

Good usable boards.one has two extra holes for a tool box. Minor pitting in a few areas but good solid boards. Doesn't say made in USA, is that odd? 60.00 for the pair plus shipping. I just mailed to ny.and nj. Shipping was 44.00 IMG_20210827_134014948_HDR.jpg IMG_20210827_134008000_HDR.jpg IMG_20210827_134045335_HDR.jpg IMG_20210827_134024497.jpg

0 Replies

709 Views

Last post by CTLeonard
Fri Aug 27, 2021 3:55 pm
WTB 1917 - 1923 Hood Shelf Pair

Last post by FATMAN « Fri Aug 27, 2021 1:59 pm
Replies: 5
by J1MGOLDEN » Thu Aug 26, 2021 4:00 pm

First post

Wanted Model T Hood Shelf Pair Part Number 4056/57A. E-mail Jim Golden, bowie, MD

Last post

I have a new set if you do not find any, Bob

5 Replies

1220 Views

Last post by FATMAN
Fri Aug 27, 2021 1:59 pm
WTB Zenith updraft intake Manifold.

Last post by Channel1tv « Fri Aug 27, 2021 12:23 pm
Replies: 3
by Channel1tv » Mon Aug 02, 2021 5:09 pm

First post

WTB Zenith updraft intake Manifold.
With Linkage would be nice too.
Yes I saw the one on ebay but I do not need a carb.
Any one have a spare?
Thanks!
Bryan

Last post

bump to the top

3 Replies

1315 Views

Last post by Channel1tv
Fri Aug 27, 2021 12:23 pm
For Sale: Stromberg Heat Stove

Last post by T Cruiser « Fri Aug 27, 2021 11:27 am
Replies: 1
by T Cruiser » Fri Aug 27, 2021 12:26 am

First post

$60.00 plus shipping, or free delivery to Tulare Swap Meet.

Ted at 503-728-3476.

Last post

The heat stove is sold.

1 Replies

742 Views

Last post by T Cruiser
Fri Aug 27, 2021 11:27 am
1911 Door Handle Pair SOLD

Last post by Dollisdad « Fri Aug 27, 2021 10:44 am
Replies: 2
by modeltbarn » Wed Aug 25, 2021 1:32 pm

First post

This is a nice pair of 1911 door handles, ready to install. It's a very nice set.

Price is $150 plus shipping
SOLD

Last post

Yes they are correct for a 1912 outside handle touring.

2 Replies

994 Views

Last post by Dollisdad
Fri Aug 27, 2021 10:44 am
Your Parts order has Free Delivery to Hershey

Last post by CudaMan « Fri Aug 27, 2021 7:59 am
Replies: 1
by Burlingtontguy » Thu Aug 26, 2021 10:42 pm

First post

Its quickly becoming Hershey wish List time.. Send me your needs and I will bring your order to Hershey, send an e-mail or
call me at 401-932-3191 Dennis in Connecticut

Last post

What field and spaces will you be in at Hershey?

1 Replies

912 Views

Last post by CudaMan
Fri Aug 27, 2021 7:59 am
SOLD! For Sale: Set of NOS Champion X Spark Plug Cores

Last post by tbaghdadi « Fri Aug 27, 2021 1:18 am
Replies: 6
by tbaghdadi » Thu Aug 19, 2021 9:22 pm

First post

I am going thru parts I collected over the years in order to fund my T restoration. I have a set of NOS Champion X Cores for sale. $100 plus shipping. One of the Cores has red writing while the others are orange. Renew your Champion X plugs now. I will be posting other sets for sale. PM me or email me at tarikbaghdadi@msn.com.

Last post

Scott C.

Please check your email. I just now responded.

Thanks,

Tarik

6 Replies

1917 Views

Last post by tbaghdadi
Fri Aug 27, 2021 1:18 am
Speedster goodies Brass monocal +

Last post by Nv Bob « Fri Aug 27, 2021 1:13 am

by Nv Bob » Fri Aug 27, 2021 1:13 am

Sale starts
Brass monocal windshield New with 15 aquylic
Disk needs final fit n finish $325+ shipping
Ricardo head cleand outer Crack repairs by lick n stich
Magged good has priming cup holes $495+ shipping
More parts listed soon
Bob
Jalopyt@yahoo.com

0 Replies

941 Views

Last post by Nv Bob
Fri Aug 27, 2021 1:13 am
SOLD : NOS 1926-1927 Spindle Body & Bushing, $120 Plus Shipping

Last post by RichardW « Thu Aug 26, 2021 2:12 pm

by RichardW » Thu Aug 26, 2021 2:12 pm

SOLD : NOS 1926-1927 Spindle Body & Bushing, $120 Plus Shipping

0 Replies

748 Views

Last post by RichardW
Thu Aug 26, 2021 2:12 pm
SOLD : Modern Turbo 400 Clutch Disc Set (New), $88 Plus Shipping

Last post by RichardW « Thu Aug 26, 2021 2:09 pm

by RichardW » Thu Aug 26, 2021 2:09 pm

SOLD : Modern Turbo 400 Clutch Disc Set (New), $88 Plus Shipping

0 Replies

809 Views

Last post by RichardW
Thu Aug 26, 2021 2:09 pm
SOLD : Chevrolet Drop Spindles, $85 Plus Shipping

Last post by RichardW « Thu Aug 26, 2021 2:03 pm

by RichardW » Thu Aug 26, 2021 2:03 pm

SOLD : Chevrolet Drop Spindles, $85 Plus Shipping

0 Replies

799 Views

Last post by RichardW
Thu Aug 26, 2021 2:03 pm
WTB '24, '25 or '26 Illinois Trailer License Plate

Last post by TRDxB2 « Thu Aug 26, 2021 1:53 pm
Replies: 4
by catbol » Sun Aug 22, 2021 10:45 am

First post

Looking for a 1924, 1925 or 1926 Illinois Trailer license plate in good to excellent condition.

Last post

Was curious about when Illinois started to issue Trailer plates and confirmed it was in 1924. I did an extensive internet search to see what the early ones looked like - Found some on Worthpoint, so they are out there. Also found a Dealer plate for 1924 so easy to see what they would look liked too. In searching I did see a shorty 1926 plate so it...

4 Replies

1154 Views

Last post by TRDxB2
Thu Aug 26, 2021 1:53 pm
FS American Bosch magneto (not T?) best offer

Last post by Ruxstel24 « Thu Aug 26, 2021 1:27 pm
Replies: 1
by Ruxstel24 » Sat Aug 21, 2021 9:32 pm

First post

Don’t believe this is for a T, but someone needs to rescue this. $80 OBO plus shipping USA
Please contact via email hpautorepairdd at Gmail dot com

Last post

Best offer

1 Replies

841 Views

Last post by Ruxstel24
Thu Aug 26, 2021 1:27 pm
Sale pending Ez-fill Radiator cap, bronze

Last post by Ruxstel24 « Thu Aug 26, 2021 1:14 pm
Replies: 3
by Ruxstel24 » Thu Aug 26, 2021 11:51 am

First post

Nice little accessory for the radiator.
Solid brass or bronze. I hit it with a buffer to show the writing better, it’s your call to keep the patina or not. Would look great on a speedster. Threads right on my touring. The catch works to keep it closed also.
$35 including shipping USA
Please contact via email, hpautorepairdd at Gmail dot com

Last post

The Walker Muffler people, I presume?

I would assume so Pat.

Sold pending payment to Ed, emailed at 12:40.

3 Replies

1096 Views

Last post by Ruxstel24
Thu Aug 26, 2021 1:14 pm
WTB: 26 Radiator Apron

Last post by Ruxstel24 « Thu Aug 26, 2021 11:44 am
Replies: 2
by Scott C. » Thu Aug 26, 2021 1:39 am

First post

I am looking for a radiator apron for my 26 Roadster. If anyone has an extra that they would sell let me know.

Last post

Sent you an email with some pictures Scott

2 Replies

614 Views

Last post by Ruxstel24
Thu Aug 26, 2021 11:44 am
UPDATE all gone! Ruckstell fiber washers

Last post by Original Smith « Thu Aug 26, 2021 10:05 am
Replies: 36
by Dropacent » Sun Apr 25, 2021 2:27 pm

First post

8-18 update. ALL GONE , thanks. Larry Smith is going to have these available soon.

What would Glover do? No more big projects around here so decided to have wifey convert my coveted really old red fiber material into washers. She just don’t know it yet! This stuff wears like the hobs of hell, but you need to decide. If you want a machined washer...

Last post

Langs now has the new .125 washers that I had made. Please remember you may have to alter the thickness of the washers to fit your application.
These have the dowel pin holes just like the originals.

36 Replies

4982 Views

Last post by Original Smith
Thu Aug 26, 2021 10:05 am
Loose Ruckstell Guts SOLD

Last post by John bevardos « Thu Aug 26, 2021 9:53 am
Replies: 1
by modeltbarn » Wed Aug 25, 2021 6:23 pm

First post

I think this P159 bellhousing looks good, and it still has the thrust pins in it. The P160 needs to be rebushed. The surfaces on the P-141 appear excellent, possibly resurfaced already .(I'm pretty sure it's that part, it looks like it...). The pins and gears are appear worn but they are included.

$100 plus shipping

SOLD

Last post

Hi Gary, I'll take em.john

1 Replies

973 Views

Last post by John bevardos
Thu Aug 26, 2021 9:53 am
13-25 running boards fs. Sold

Last post by Will_Vanderburg « Wed Aug 25, 2021 9:51 pm
Replies: 2
by CTLeonard » Fri Aug 20, 2021 12:03 pm

First post

Pretty straight boards; red one has some pitting and 2 small holes on inside edge. 285.00 new ; buy today for 60.00 plus shipping IMG_20210820_105039661.jpg IMG_20210820_105028279_HDR.jpg IMG_20210820_105034651.jpg

Last post

Second private message sent.

2 Replies

919 Views

Last post by Will_Vanderburg
Wed Aug 25, 2021 9:51 pm
New set Dunn Counterweights, SOLD ! to your door.

Last post by Dropacent « Wed Aug 25, 2021 9:48 pm
Replies: 2
by Dropacent » Wed Aug 25, 2021 8:43 pm

First post

9BA00C29-C53B-40DB-93A3-E85B2757F00E.jpeg The postmaster general will get about $18 of this sale. That’s because they will go into a priority box, and delivered to your door for $75.
I have friend with a T engine he and his dad did in their backyard over 50 years ago. He’s been across country in it, has never had the motor apart and is the...

Last post

That’s a weight(s) off my mind! SOLD !

2 Replies

869 Views

Last post by Dropacent
Wed Aug 25, 2021 9:48 pm
Headlight Burner Bases and Elbows. SOLD

Last post by modeltbarn « Wed Aug 25, 2021 6:31 pm

by modeltbarn » Wed Aug 25, 2021 6:31 pm

Pair of repop gas burner bases and E&J elbows, every nice condition, just need cleaning and to be sprayed with matt-black again. $50 plus shipping.

SOLD

0 Replies

819 Views

Last post by modeltbarn
Wed Aug 25, 2021 6:31 pm
PASCO 30 x 3 1/2 wire wheel set SOLD

Last post by OilyBill « Wed Aug 25, 2021 6:21 pm
Replies: 4
by Layden Butler » Sat Aug 21, 2021 7:05 pm

First post

Complete set of PASCO 30 x 3 1/2 clincher wire wheels, 5 wheels, 5 hub adaptors ( 5th is for spare wheel mount), complete set of threaded locking rings and hubcaps, wrench. Unrestored as found wheels which will need restoration. Happy to answer questions, can get into a cardboard box on a pallet and deliver to a freight carrier ( perhaps Fastenal)...

Last post

How much for the set?

4 Replies

1775 Views

Last post by OilyBill
Wed Aug 25, 2021 6:21 pm
Various Tools

Last post by modeltbarn « Wed Aug 25, 2021 6:12 pm
Replies: 6
by modeltbarn » Wed Aug 18, 2021 10:25 pm

First post

Assorted wrenches $15

Wrenches.jpg

Valve Lifters. You'll need to bend the 'S' that goes over the manifold clamp, but that's easy. These are a good roadside tool to have. $30 each
BOTH SOLD

Valve Lifters.jpg

ZIM Valve Seat Cutter set, excellent condition, doesn't look used $35
SOLD

Valve Seat Cutter_2.jpg

Last post

Dan; he had me ship to Chaffin's, to have his items put with his car.

6 Replies

1751 Views

Last post by modeltbarn
Wed Aug 25, 2021 6:12 pm
MORE Assorted Parts #2

Last post by modeltbarn « Wed Aug 25, 2021 2:52 pm
Replies: 1
by modeltbarn » Wed Aug 25, 2021 2:28 pm

First post

Pan reinforcement pair, nice and flat, not pitted $25

pan supports.jpg

Sight glass $5
Sold Pending Payment

Site Guage.jpg

1915-16 Hood Former bolts, painted with Centari. $15
SOLD

Hood Former Bolts.jpg
Hood Former Bolts_2.jpg

Contact Info.JPG

Last post

Valve lifter wrench; this is my last one $30
SOLD
Valve Wrench.jpg

Pile of wrenches $15

Wrenches.jpg

Valve covers. Not the thick ones but pretty flat and nicely embossed $15

Valve Covers.jpg

Speedometer face with re-plated and polished rim $25

Speedometer Face.jpg

NOS Pan ball Socket $15
SOLD
Pan Socket.jpg

All are...

1 Replies

810 Views

Last post by modeltbarn
Wed Aug 25, 2021 2:52 pm
For Sale***26-27 Touring Door left rear

Last post by Jack Putnam, in Ohio « Wed Aug 25, 2021 2:17 pm
Replies: 2
by Jack Putnam, in Ohio » Tue Aug 10, 2021 5:12 pm

First post

For sale: 26,27 left rear touring door. Few bumps on face, but not rusted. Has door latch. $95 + $25 shipping. PayPal between friends, check, or pictures of dead presidents if you pick up. 419-3 zero six-39 six six. Jputnam(at)wcoil.com.

Last post

one more time to post

2 Replies

910 Views

Last post by Jack Putnam, in Ohio
Wed Aug 25, 2021 2:17 pm
Early Door Latch, Right Rear

Last post by modeltbarn « Wed Aug 25, 2021 1:46 pm
Replies: 1
by modeltbarn » Thu Aug 19, 2021 7:18 pm

First post

This latch operates but needs to be cleaned and lubed. One corner is bent; it's an easy fix but I'll let the buyer do that.

$50 plus shipping

Last post

New price is $50.

This is a nice latch set, and the bent corner is easy to straighten.

1 Replies

848 Views

Last post by modeltbarn
Wed Aug 25, 2021 1:46 pm
Magneto Bulbs, in box

Last post by modeltbarn « Wed Aug 25, 2021 1:36 pm
Replies: 2
by modeltbarn » Wed Aug 18, 2021 10:16 pm

First post

I have two boxes; each is mostly full but not completely.

The TITAN box is deteriorating quite a bit, but the wrappers inside are good. There are 10 wrappers with 8 bulbs. Price is $70 plus shipping

The US Bulbs box is separated at the folds, and has 7 wrapped bulbs. The price is $60 plus shipping .

I will sell both boxes together for $120...

Last post

New prices:

The TITANs are now $60

The US Bulbs are now $50.

I will sell both boxes together for $100 plus shipping.

2 Replies

996 Views

Last post by modeltbarn
Wed Aug 25, 2021 1:36 pm
Running Board and Top Iron Brackets

Last post by modeltbarn « Wed Aug 25, 2021 1:33 pm
Replies: 1
by modeltbarn » Thu Aug 19, 2021 11:10 am

First post

The running board brackets are bent and there is pitting, but they're easy enough to straighten and you can fill the heavy pits easily with a MIG welder or brazing if you want to.
Price is $15 plus shipping

Running Board Brackets.jpg

Running Board Brackets.jpg

Running Board Brackets_3.jpg

Top iron brackets
Price is $15 plus shipping...

Last post

I'll sell the entire group for $20 plus shipping.

1 Replies

832 Views

Last post by modeltbarn
Wed Aug 25, 2021 1:33 pm
SOLD: A Really Nice Aluminum Updraft Intake Manifold

Last post by GGZ « Wed Aug 25, 2021 11:34 am
Replies: 4
by GGZ » Thu Jul 29, 2021 6:41 pm

First post

Here is a really nice aluminum intake manifold. It can be used with a variety of updraft carburetors. The carburetor bore is about 1 1/4 and the center to center mounting measurement is about 2 3/4 . This is an excellent, original accessory manifold with no breaks, cracks, or repairs. It is really clean.

The price is 165.00 including shipping and...

Last post

SOLD 8/30/21

4 Replies

1599 Views

Last post by GGZ
Wed Aug 25, 2021 11:34 am
HEADS up Guys !!!!!!!!!

Last post by ironhorse « Wed Aug 25, 2021 8:42 am
Replies: 16
by Dan Hatch » Tue Aug 17, 2021 10:34 am

First post

Looks like they are back. Just been contacted with the old “I will send you a check to cover the shipping for you to pay shipper “come on.
And this was sent to my email and not by the PM system.
WATCH OUT they are working hard for your money ! Dam

Last post

They keep at it because there are still people who fall for it! My wife got a call from someone who claimed there might be fraudulent activity on her Amazon account, She has Alzheimer's so she told them hold on you have to talk to my husband about that...... when I answered I asked one simple question and they hung up! the question was who am I?

16 Replies

3472 Views

Last post by ironhorse
Wed Aug 25, 2021 8:42 am
WTB Dimmer Coil

Last post by FATMAN « Tue Aug 24, 2021 11:15 pm
Replies: 6
by PaladinBirdy » Wed Aug 18, 2021 4:09 pm

First post

Early 2019 non-starter Roadster needs a dimmer coil to complete the wiring. Anyone got one to sell/know where I can get one? If not, is there a relatively simple way to simply build a tapped inductor myself to look original?

Last post

I have some Bob

6 Replies

1642 Views

Last post by FATMAN
Tue Aug 24, 2021 11:15 pm
Original Fenders For Sale

Last post by ronc « Tue Aug 24, 2021 9:22 pm
Replies: 8
by ken4601 » Sat Aug 21, 2021 1:40 pm

First post

These fenders came from my Grandparent's attic. My Dad had someone from the Club identify them. He has since passed away. Here's the list:

RH Rear: 15-16 Coupe, Roadster
RH Front: 17-22
LH Front: 23-25

If interested, please e-mail: dgbove13@hotmail.com

Thanks, Dave

Last post

Thank you George I will be putting them on the 20. I bought rootlieb repros for the 15 until I find good originals

8 Replies

2319 Views

Last post by ronc
Tue Aug 24, 2021 9:22 pm
WTB AC Brake Equalizer

Last post by dr1960 « Tue Aug 24, 2021 9:19 pm
Replies: 6
by D Stroud » Sun Jul 18, 2021 3:32 am

First post

Looking for an original style AC Equalizer, parts for one, or one of Dan McEachern's excellent reproductions. Dave

Last post

I am looking for the setup too. Rich Baughmann is not going to be back in the shop for a good while.

6 Replies

2354 Views

Last post by dr1960
Tue Aug 24, 2021 9:19 pm
NUTS, NUTS, NUTS I have your NUTS!!!!!!

Last post by henryford2 « Tue Aug 24, 2021 8:34 pm
Replies: 2
by henryford2 » Tue Aug 24, 2021 8:14 pm

First post

I have almost 1,000 (12 lbs.) of old pattern square nuts. This is the style with sharp square corners rather than the modern rounded edges. A must have if you're building or restoring a wooden Model T body and want that authentic period correct look. Blacksmith Bolts carries the larger old pattern sizes but not the smaller sizes. Plain steel...

Last post

Sorry Richard sold @ 8:17 with a message to my email address.

2 Replies

1104 Views

Last post by henryford2
Tue Aug 24, 2021 8:34 pm
Ignition Switch FS

Last post by Jeepbone1 « Tue Aug 24, 2021 4:44 pm
Replies: 2
by Jeepbone1 » Tue Aug 24, 2021 4:26 pm

First post

Nice original 25 and back black ignition switch for sale. Guts look almost brand new. $75 obo plus the ride. Takes a #64 key not included. Both light switch and key switch are nice and tight. Good contact all around.
PayPal friends/family preferred but will take a check or money order. Call, text or email anytime. I prefer you call....

Last post

SOLD PENDING PAYMENT.

Brad

2 Replies

972 Views

Last post by Jeepbone1
Tue Aug 24, 2021 4:44 pm
COIL BOX -----WATER PUMP

Last post by RichardG « Tue Aug 24, 2021 4:20 pm
Replies: 5
by RichardG » Mon Aug 23, 2021 8:42 pm

First post

OFF MY 21 FORD IT WORKED FINE,FOUND ONE IN BETTER CONDITION, 40.00 PLUS SHIPPING. WATER PUMP ,CAME WITH MY CAR IT DON'T NEED IT RUNS COOL AS IS--SHAFT TIGHT,TURNS FINE, I THINK ITS READY TO BE USED..10.00 PLUS SHIPPING.both sold ,thank you ,m-t-f-c-a

Last post

coil box, jack, water pump gone--thank you.

5 Replies

1653 Views

Last post by RichardG
Tue Aug 24, 2021 4:20 pm
Schrader Metal Valve Stems on Ebay - Not Mine

Last post by CudaMan « Tue Aug 24, 2021 3:27 pm

by CudaMan » Tue Aug 24, 2021 3:27 pm

I have no connection to the seller or the listings, but someone is selling groups of Schrader metal valve stems on Ebay right now. The seller is listing them by their overall height, not their stem number, and I can't tell from the pictures whether there are any 777s or 888s in the bunch.

His asking prices are very reasonable, IMO. If you are...

0 Replies

866 Views

Last post by CudaMan
Tue Aug 24, 2021 3:27 pm
Fs 1917 rebuilt engine

Last post by Rjackson « Tue Aug 24, 2021 1:49 pm

by Rjackson » Tue Aug 24, 2021 1:49 pm

Fs 1917 engine rebuilt
Aluminum pistons.060 over new day valves & keepers, new Babbitt& rods transmission rebuilt new clutches & bands $2800.00 Colorado area call Ron at 720-220-4744

0 Replies

904 Views

Last post by Rjackson
Tue Aug 24, 2021 1:49 pm

New Topic

19799 topics

Page 97 of 198
- Jump to page:
Previous
1
…
95
96
97
98
99
…
198
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum