Classifieds - Parts - MTFCA Forum

Classifieds - Parts

New Topic

10406 topics

Page 1 of 105
- Jump to page:
1
2
3
4
5
…
105
Next

Announcements

Replies

Views

Last post

Tips for successful selling on MTFCA classifieds

Last post by Steves Ts « Fri Jan 05, 2024 1:27 pm
Replies: 36
by AdminJeff » Sun Oct 06, 2019 12:30 pm

First post

We set up this forum in Jan and 1000's of items have been sold. That's good. Speaking from personal experience both selling and watching numerous transactions unfold, there are things that work, and others that don't work as well. Here are some pointers to get the most out of placing an ad:

- keep your description as clear and concise as possible...

Last post

WTB Outside body moldings that would go on the back of the body then curl down and continue on the perimeter below the turtle deck for a 1914 Ford Model T Roadster. these moldings appear to be solid steel that got mounted via screws. Any help would be appreciated !

36 Replies

83861 Views

Last post by Steves Ts
Fri Jan 05, 2024 1:27 pm

Topics

Replies

Views

Last post

Avoid scammers. Don't post personal info!

Last post by drzomber « Sat Jan 10, 2026 4:31 pm
Replies: 12
by AdminJeff » Wed Sep 18, 2024 8:20 pm

First post

To Avoid scammers, Don't post personal info! This includes your email address, & phone number.
Do so at your own risk.
It's better to communicate through the forum system.

AdminJeff

Last post

ModelTKeith, keithbrouhard@gmail.com

Same! He's apparently making the rounds.

12 Replies

15300 Views

Last post by drzomber
Sat Jan 10, 2026 4:31 pm
WTB…..Rare Hubcap

Last post by WorldChamp1914 « Fri Jan 16, 2026 1:14 am
Replies: 4
by WorldChamp1914 » Fri Jan 02, 2026 12:53 am

First post

IMG_7249.png

Last post

Oh wow, thanks for sharing.

4 Replies

639 Views

Last post by WorldChamp1914
Fri Jan 16, 2026 1:14 am
FF early parts

Last post by KimDobbins « Thu Jan 15, 2026 10:46 pm
Replies: 5
by KimDobbins » Thu Jan 15, 2026 1:35 pm

First post

1 pair body to firewall brackets, $40. Rear fender
brackets, $35 per pair. Top iron to top socket brackets $30 each. Steering post brackets $150 each. Carb adjuster rods, 2 hole $125, 4 hole $225 each. All plus shipping. kdmks at att.net.

Last post

All parts are sold.

5 Replies

280 Views

Last post by KimDobbins
Thu Jan 15, 2026 10:46 pm
FS cowl gas tank

Last post by schwabd1 « Thu Jan 15, 2026 10:28 pm
Replies: 3
by Karl Von Neumann » Thu Dec 11, 2025 9:24 am

First post

Cowl gas tank does not leak solder has been touched up round the outlet. Over flow tube is broken off at the outlet Decent looking usable tank $200 plus the ride or local pick up pleasant prairie wisconsin can sell you the straps for an additional 50$

Last post

Is this an open car or closed car tank?

3 Replies

479 Views

Last post by schwabd1
Thu Jan 15, 2026 10:28 pm
FS KR Wilson Trans. Head for Engine Stand $500.00

Last post by Pep C Strebeck « Thu Jan 15, 2026 10:19 pm
Replies: 2
by Tparts » Thu Jan 15, 2026 9:25 pm

First post

For Sale is an adapter that is made for a KR Wilson engine stand. It is made to hold a transmission and has the special threaded plug to mount it. I believe it is for a V8 Ford application but please check to be sure. $500.00 plus shipping Lang’s 1-800-872-7871

Last post

BB-174, Transmission Adapter, BB Truck.

2 Replies

103 Views

Last post by Pep C Strebeck
Thu Jan 15, 2026 10:19 pm
FS Pair of 1pc spindles (1922 style) $375.00

Last post by Tparts « Thu Jan 15, 2026 9:13 pm
Replies: 2
by Tparts » Thu Jan 15, 2026 9:00 pm

First post

For Sale are a pair of one piece front axle spindles. These are the 1922-3 style. $375.00 plus shipping Lang’s 1-800-872-7871

Last post

Pending to Michael. Please call us in the morning.

2 Replies

73 Views

Last post by Tparts
Thu Jan 15, 2026 9:13 pm
FS 1917-25 Nice Steering Wheel $85.00

Last post by Tparts « Thu Jan 15, 2026 8:46 pm

by Tparts » Thu Jan 15, 2026 8:46 pm

For sale is a very nice 1917-1925 Steering Wheel complete with spider. No cracks in rim. $85.00 Lang’s 1-800-872-7871

0 Replies

62 Views

Last post by Tparts
Thu Jan 15, 2026 8:46 pm
FS Accessory Anti-Theft Device $75.00

Last post by Tparts « Thu Jan 15, 2026 8:10 pm
Replies: 3
by Tparts » Wed Jan 07, 2026 10:23 pm

First post

For Sale is a rare accessory anti theft device. It is connected to the ignition system and will ground out when the car travels over uneven ground. There isn’t any manufacturer marking on the unit. $75.00 plus shipping. Lang’s 1-800-872-7871

Last post

Down ten bucks

3 Replies

401 Views

Last post by Tparts
Thu Jan 15, 2026 8:10 pm
FS 1915 Touring Tail Light/Lic Plate BKT $50.00

Last post by Tparts « Thu Jan 15, 2026 8:07 pm
Replies: 5
by Tparts » Thu Jan 01, 2026 5:37 pm

First post

For Sale is an original 1915-early 16 Tail Light, License Plate Bracket in good condition. $50.00 plus shipping. Lang’s 1-800-872-7871

Last post

Down another ten bucks

5 Replies

624 Views

Last post by Tparts
Thu Jan 15, 2026 8:07 pm
FS New All Gray 30 x 3 Non Skid Firestone Tire $125.00

Last post by Tparts « Thu Jan 15, 2026 8:04 pm
Replies: 7
by Tparts » Wed Dec 10, 2025 4:34 pm

First post

FS Brand New Old Stock ( in the wrapper ) 30 X 3 Firestone Gray Non Skid Tire. Only one available. Originally sold for $320.00 each, but has not been available for over 10 years.
$125.00 plus shipping. Lang’s 1-800-872-7871

Last post

Another drop in price

7 Replies

713 Views

Last post by Tparts
Thu Jan 15, 2026 8:04 pm
FS “New Gray 30 X 3-1/2 Universal Rib Tire $100.00

Last post by Tparts « Thu Jan 15, 2026 7:57 pm
Replies: 7
by Tparts » Wed Dec 10, 2025 5:02 pm

First post

FS Solid Gray 30 X 3-1/2 Universal Straight Rib Tire in the Black Plastic Wrapper. Only One Available. These haven’t been available for over 10 years. Originally $240.00 each $100.00 plus shipping. Lang’s 1-800-872-7871

Last post

Down again

7 Replies

773 Views

Last post by Tparts
Thu Jan 15, 2026 7:57 pm
October 1913 Motor Free delivery to Luray Swap Meet)!

Last post by Tparts « Thu Jan 15, 2026 7:53 pm
Replies: 6
by Tparts » Thu Apr 24, 2025 3:15 pm

First post

For Sale October 1913 Motor. ( Please review photos for condition). $425 with Free delivery to Luray Swap Meet
Lang’s 1-800-872-7871

Last post

Still available

6 Replies

2441 Views

Last post by Tparts
Thu Jan 15, 2026 7:53 pm
FS Original Accessory Picnic Set in Case $175.00

Last post by Tparts « Thu Jan 15, 2026 7:49 pm
Replies: 1
by Tparts » Mon Jan 12, 2026 9:12 pm

First post

For Sale is an original “Icy Hot” Picnic Set with suitcase. There are 4 plates, knives, forks, and spoons. Unfortunately the Thermos is missing. $175.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price drop

1 Replies

359 Views

Last post by Tparts
Thu Jan 15, 2026 7:49 pm
FS Accessory Fan Blade $20.00

Last post by Tparts « Thu Jan 15, 2026 7:40 pm
Replies: 8
by Tparts » Thu Jan 01, 2026 9:23 pm

First post

For sale is an interesting accessory Fan Blade. Look carefully at the photos for condition as some blades are bent. Comes with a 26-27 extended fan hub. $20.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price decrease

8 Replies

804 Views

Last post by Tparts
Thu Jan 15, 2026 7:40 pm
Rear Hub Puller FS

Last post by Dan Hatch « Thu Jan 15, 2026 7:00 pm
Replies: 2
by Dan Hatch » Sat Jan 10, 2026 10:36 am

First post

Here is an extra rear hub puller to me. I think it is for a TT. Measure the same as my Ford TT puller. Don’t see any markings on it. See pictures. $40 + shipping. Email me by the forum. Dan
IMG_5118.jpeg
IMG_5119.jpeg

Last post

Back to the top

2 Replies

336 Views

Last post by Dan Hatch
Thu Jan 15, 2026 7:00 pm
Battery tops NOS. FS

Last post by Dan Hatch « Thu Jan 15, 2026 6:59 pm
Replies: 4
by Dan Hatch » Sat Jan 10, 2026 2:38 pm

First post

Here are a pair of NOS Battery cell tops for the 1925 Rubber case Ford battery. They don’t say Ford on the but came extra with my NOS Ford battery. Taken out of a Ford dealership in the 1960. $30 for the pair + shipping. Email me by forum. Dan
IMG_5149.jpeg

IMG_5150.jpeg
IMG_5151.jpeg

Last post

Back to the top

4 Replies

574 Views

Last post by Dan Hatch
Thu Jan 15, 2026 6:59 pm
FS STEERING ARMS WITH SPEEDO HOLE

Last post by got10carz « Thu Jan 15, 2026 6:13 pm

by got10carz » Thu Jan 15, 2026 6:13 pm

For Sale arms pictured. The ones marked $40 look good. The ones marked $30 need repair around tie rod hole. Steve 701 212 5009.

0 Replies

77 Views

Last post by got10carz
Thu Jan 15, 2026 6:13 pm
Original Main bearing bolts and nuts FS Lower Price !

Last post by Ruxstel24 « Thu Jan 15, 2026 5:45 pm
Replies: 2
by Ruxstel24 » Wed Jan 07, 2026 3:23 pm

First post

I have 2 sets, threads are good. $50 each includes shipping USA 48.
Please call or text 33zero 3nine one nine zero 62
Thanks Dave

Last post

TTT please

2 Replies

285 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:45 pm
Engine mount repair brackets FS

Last post by Ruxstel24 « Thu Jan 15, 2026 5:44 pm
Replies: 5
by Ruxstel24 » Wed Jan 07, 2026 1:06 pm

First post

I have one pair and 3 other single pieces.
$65 for all of them including shipping to USA 48
Please call or text me at 33zero 3nine one nine zero 62 Thanks Dave

Last post

TTT please

5 Replies

331 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:44 pm
DUNN counterweights FS Lower price !

Last post by Ruxstel24 « Thu Jan 15, 2026 5:44 pm
Replies: 3
by Ruxstel24 » Mon Dec 29, 2025 9:34 am

First post

I have a set, possibly 2 (I have to look again)
No bolts but they’re nothing special.
$150 per set and I’ll include shipping to 48 USA
Best way to contact me is 33zero 3nine one nine zero 62 Dave

Last post

TTT please

3 Replies

395 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:44 pm
Horn buttons FS Lower price ! :SOLD:

Last post by Ruxstel24 « Thu Jan 15, 2026 5:43 pm
Replies: 4
by Ruxstel24 » Fri Dec 26, 2025 12:52 pm

First post

I have 3 column mount horn switches and brackets. $32ea including shipping to 48 USA
And one steering wheel nut switch (Canadian?)
$30 including shipping USA 48
Best way to contact me is call or text 33zero 3nine one nine zero 62

Last post

All buttons are sold to Bryce, thanks !

4 Replies

470 Views

Last post by Ruxstel24
Thu Jan 15, 2026 5:43 pm
FS High Hood Dash

Last post by JZSlenker « Thu Jan 15, 2026 2:10 pm
Replies: 1
by JZSlenker » Sun Jan 04, 2026 5:49 pm

First post

Dash is in pretty good shape. Soaked in EvapoRust and then coated in light oil for shipment. Buyers pays actual shipping via PayPal. Make reasonable offer.

Last post

back to top

1 Replies

269 Views

Last post by JZSlenker
Thu Jan 15, 2026 2:10 pm
1912 Holley H1 carburetor

Last post by Corey Walker « Thu Jan 15, 2026 2:03 pm
Replies: 1
by Corey Walker » Sat Jan 10, 2026 1:59 pm

First post

Completely disassembled and cleaned, new venturi, float, viton tipped needle and seat conversion, new spray needle with nice original knob, excellent throttle shaft with bushings installed, test run. There were a few cracks in the bowl I repaired. $575 postpaid to continental USA or $475 without the inlet elbow in case you have a carb already and...

Last post

Back to top.

1 Replies

332 Views

Last post by Corey Walker
Thu Jan 15, 2026 2:03 pm
FS 1911-12 “Ford” Transmission Door $135.00

Last post by Tparts « Thu Jan 15, 2026 1:47 pm
Replies: 2
by Tparts » Wed Jan 07, 2026 10:09 pm

First post

For Sale is a very nice “Ford Script” Transmission Door for late 1911-1912 tapered transmission cover. It is in excellent condition with no pitting and a very crisp script. It has been glass beaded. $135.00 plus shipping. Lang’s 1-800-872-7871

Last post

Price drop

2 Replies

398 Views

Last post by Tparts
Thu Jan 15, 2026 1:47 pm
WTB Improved Rad Shell

Last post by Ken Buhler « Thu Jan 15, 2026 10:36 am

by Ken Buhler » Thu Jan 15, 2026 10:36 am

I'm hoping to find a mint condition tall Canadian nickle rad shell. Dan Hatch sold one a few years ago and if it didn't get used, please write to me.
Ken Buhler

0 Replies

105 Views

Last post by Ken Buhler
Thu Jan 15, 2026 10:36 am
FS NOS Champion X Spark Plugs (2)

Last post by Ken Buhler « Thu Jan 15, 2026 10:16 am
Replies: 1
by JZSlenker » Thu Jan 15, 2026 10:11 am

First post

NOS Champion X Spark Plugs from the 1950s.
Make Offer
Pay by Paypal

Last post

Email sent

1 Replies

173 Views

Last post by Ken Buhler
Thu Jan 15, 2026 10:16 am
***SOLD***FOR SALE - 1911 / 1912 Engine

Last post by RGould1910 « Thu Jan 15, 2026 9:10 am
Replies: 16
by Lcjudge » Fri Jun 07, 2024 8:26 pm

First post

If you've got an early T here's an engine for you. According to the T SN listing, this engine was in a car sold in Dec. 1911. There isn't a casting date on the engine (that I've found). The SN on it is 88211, So this was probably in a 1912 Model year car. However, it could have been in an 11 sold late. Here in Ky we didn't have a title law until...

Last post

The pan ears have 7 rivets. Tommy sent photos.

16 Replies

3518 Views

Last post by RGould1910
Thu Jan 15, 2026 9:10 am
Sale pending 1912 engine, transmission, magneto assembly complete

Last post by RGould1910 « Thu Jan 15, 2026 9:07 am
Replies: 2
by RGould1910 » Wed Jan 14, 2026 8:49 am

First post

Early 1912 engine no. 88211, complete with correct parts including head, pan, tramsnmission cover, pedals, etc.
Purchased from my good friend Tommy Turner a few years back. I recently suffered a downturn putting an end to any major restorations. The assembly has never been removed from the heavy wooden crate used to send it to me. Here is a link...

Last post

The pan ears have 7 rivets from photos Tommy sent.

2 Replies

504 Views

Last post by RGould1910
Thu Jan 15, 2026 9:07 am
Brass horn flex tube 1/2 " diameter

Last post by Grntea « Thu Jan 15, 2026 12:09 am
Replies: 1
by RichJ » Wed Jan 14, 2026 7:22 am

First post

31 long new horn brass flex tube. 25.00 plus15.00 shipping.

Last post

Email sent

1 Replies

225 Views

Last post by Grntea
Thu Jan 15, 2026 12:09 am
19" accessory wire disc wheel lock ring F/S

Last post by Layden Butler « Wed Jan 14, 2026 11:19 pm

by Layden Butler » Wed Jan 14, 2026 11:19 pm

Wire and disc wheel lock ring for non-Ford wheels, 19 rim size. nice ring not bent or rusty, suitable for plating. $99, packaging included, 48 state shipping $20. Contact me thru MTFCA messaging. I also have for sale one 18 , same price.
Measurements in pictures are inside and outside diameters.
Happy to answer any questions.

0 Replies

135 Views

Last post by Layden Butler
Wed Jan 14, 2026 11:19 pm
WTB Bosch plate dist and one 21” wire wheel

Last post by Dan McEachern « Wed Jan 14, 2026 10:23 pm
Replies: 6
by Noetall72 » Tue Jan 06, 2026 6:01 pm

First post

I am looking for a Bosch plate distributor. I am also looking for a single wire wheel. I would like it to not be painted up all pretty but more of a rusty patina that can be used on a speedster, to hopefully go fast. Haha.
I am located in Indiana.
Thanks for your help.

Last post

Chaffins has new front plate distributors for sale. Just FYI

6 Replies

502 Views

Last post by Dan McEachern
Wed Jan 14, 2026 10:23 pm
FS 1910-13 2pc Driveshaft Housing SOLD

Last post by Henry K. Lee « Wed Jan 14, 2026 2:49 pm
Replies: 5
by Tparts » Thu Jan 08, 2026 6:59 pm

First post

For Sale is a very nice 1910-13 Two Piece Driveshaft Housing complete ad shown in the photos. Includes the early flange with special boss where the grease cup threads in, Ford Factory number T191 driveshaft spool and front ball. No internal parts included. SOLD plus shipping Lang’s 1-800-872-7871

Last post

Economics and those interested vs inflation.

5 Replies

591 Views

Last post by Henry K. Lee
Wed Jan 14, 2026 2:49 pm
Hall-Scott Ruckstell Shift Lock Assembly

Last post by old_charley « Wed Jan 14, 2026 2:23 pm

by old_charley » Wed Jan 14, 2026 2:23 pm

This shift-lock assembly is in excellent condition with minimal wear in the shift arm and body. The plunger and spring are new. It should work just fine as it is. This isn't the same one I advertised a couple weeks ago. I'd like $250 for it. Please contact me through the forum email system if you are interested. Thanks.
Bryan Ostergren
Ruckstell...

0 Replies

235 Views

Last post by old_charley
Wed Jan 14, 2026 2:23 pm
(SOLD) Springfield Tire tool for Clincher Tires

Last post by jaybee47 « Wed Jan 14, 2026 10:53 am
Replies: 1
by WaltM » Tue Jan 13, 2026 1:21 pm

First post

(SOLD) Springfield tire tool for clincher tires. Adjusting screw is in good condition. Special tire tool with hook to grab edge of clincher rim. Price $125 plus shipping. Tool measures 15-inches in length. Email, call or text (248) 894-75fiveone. Thanks, Walt

Last post

Walt. I'd like to buy the Springfield tool. Jay.

1 Replies

340 Views

Last post by jaybee47
Wed Jan 14, 2026 10:53 am
FS late style front motor spring mount

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:06 am
Replies: 1
by Karl Von Neumann » Mon Dec 15, 2025 1:20 pm

First post

Late style engine spring mounts one has the apron bolt snapped off. Few of the top bolts are missing. 25$ each plus the ride

Last post

Move to top

1 Replies

305 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:06 am
FS early front mount

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:05 am
Replies: 1
by Karl Von Neumann » Mon Dec 15, 2025 1:21 pm

First post

Early style front engine spring mounts with caps no ubolts sorry. 30 each plus the ride

Last post

Move to top

1 Replies

304 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:05 am
FS brass holley G body

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:05 am
Replies: 2
by Karl Von Neumann » Wed Dec 10, 2025 5:49 pm

First post

Brass holley g body steel bowl 35$ plus the ride for parts a restore

Last post

Move to top

2 Replies

489 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:05 am
FS iron holley G

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:05 am
Replies: 2
by Karl Von Neumann » Wed Dec 10, 2025 5:50 pm

First post

Iron body holley g for parts or rebuild 50$ pulse the ride

Last post

Move to top

2 Replies

431 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:05 am
FS front wire wheel hubs

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:04 am
Replies: 2
by Karl Von Neumann » Wed Dec 10, 2025 5:51 pm

First post

Wire wheel front hubs 150 each plus the ride some have studs some don't just assume they need studs

Last post

Move to top

2 Replies

597 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:04 am
Bulk black era coil boxes

Last post by Karl Von Neumann « Wed Jan 14, 2026 10:04 am
Replies: 3
by Karl Von Neumann » Wed Dec 10, 2025 1:50 pm

First post

I have tons of 16 to 25 coil boxes 5 to 10$ depending on the condition bulk discounts I need to thin this out send me a message if you interested in some

Last post

Move to top

3 Replies

594 Views

Last post by Karl Von Neumann
Wed Jan 14, 2026 10:04 am
FS: Early Front Spring Clip/ Motor Mount

Last post by George House « Wed Jan 14, 2026 8:32 am
Replies: 1
by George House » Sun Jan 11, 2026 4:30 pm

First post

Only $60 + USPS flat rate small. Another sandblasted recently sold here for $100. All threads used tap or dies already and in good condition.
gwhouse731(at)gmail(dot)com

Last post

**Will now sandblast this for you for $75 total + the ride**

1 Replies

189 Views

Last post by George House
Wed Jan 14, 2026 8:32 am
Wanted Rajo B,BB,BBR single inlet updraft manifold with water tube

Last post by Mark Herdman « Tue Jan 13, 2026 7:19 pm
Replies: 5
by Mark Herdman » Thu Sep 12, 2024 11:54 pm

First post

Wanted

Rajo B,BB,BBR single inlet updraft manifold with water tube as in this photo to rebuild this Australian original race car to its 1925 form. Any help appreciated.

Rajo 33.jpg

Last post

Look at the bright side. As soon as you fabricate one, you'll find one.😄

Exactly! Happened many a time. Restore what you have first and only make the part as a last resort.

5 Replies

1356 Views

Last post by Mark Herdman
Tue Jan 13, 2026 7:19 pm
WTB Weber Cast Iron Wheel dollies

Last post by Shelbycsx « Tue Jan 13, 2026 6:43 pm
Replies: 4
by BobP » Thu Jan 08, 2026 6:03 pm

First post

I want to buy 1 or more Weber cast iron wheel dollies. They are patent dated 1910 plus more. Check the pictures. I have 3 of them, 2 complete and 1 with the castors missing, so 1 would be nice, or 2, or another set would also be fine, thanks, Bob. 507 458 6778.

Last post

If you decide to sell i'm interested.

4 Replies

415 Views

Last post by Shelbycsx
Tue Jan 13, 2026 6:43 pm
Holley G Pats Pending carburetor

Last post by Corey Walker « Tue Jan 13, 2026 5:12 pm

by Corey Walker » Tue Jan 13, 2026 5:12 pm

Completely disassembled and cleaned, new venturi, float, float valve, reconditioned spray needle and spray nozzle, throttle shaft bushings installed, crack free bowl, test run. $365 postpaid to continental USA email: wlkma9@gmail.com

0 Replies

165 Views

Last post by Corey Walker
Tue Jan 13, 2026 5:12 pm
FS: Table Load Model T Goodies

Last post by George House « Tue Jan 13, 2026 4:54 pm
Replies: 4
by George House » Mon Jan 12, 2026 4:01 pm

First post

Beginning Top Left: TT C Cab front and rear corner brackets (2) + 1 curtain frame bracket.$25 Accy cast or forged crankcase ‘ears’ Pat’d April 1918 Zoom In! $40, Pair pan/hogshead/block brackets.$35 Really nice NH Straight Thru Carb and manifold. Removed it and replaced with a U&J Only $350, Powder coated ‘17-‘23 sheet metal radiator lower apron...

Last post

TT corner brackets and pr cast crankcase ‘ears’ spoken for and all boxed up. Thanks Charlie and MTFCA

4 Replies

650 Views

Last post by George House
Tue Jan 13, 2026 4:54 pm
WTB - Coupe Seat Bracket

Last post by EdWhite « Tue Jan 13, 2026 4:45 pm

by EdWhite » Tue Jan 13, 2026 4:45 pm

Looking for this seat bracket for the passenger side of a 24/25 coupe let me know if you have anything that looks like this thanks.

0 Replies

93 Views

Last post by EdWhite
Tue Jan 13, 2026 4:45 pm
Wood locking steering wheel

Last post by Joe Bell « Tue Jan 13, 2026 4:17 pm
Replies: 6
by Wingnut » Fri Jan 09, 2026 7:04 pm

First post

Up for sale is an all wood locking steering wheel with key and center horn button all mounting hardware included. Asking $200 plus shipping. interested can text me at 3threezero 24one two6four1. I did try, to no avail, to post pics, go figure, if you text me I will text pics back. Wingnut

Last post

Apco was the horn button on the one I had just like that.

6 Replies

608 Views

Last post by Joe Bell
Tue Jan 13, 2026 4:17 pm
FS 1909-11 Original Hood Hooks SOLD

Last post by Gleaner « Tue Jan 13, 2026 3:38 pm
Replies: 1
by Tparts » Mon Jan 12, 2026 8:51 pm

First post

For Sale are a set of 4 original hood hold downs. 2 have very little wear with factory numbers. Please inspect the photos for the condition of each. SOLD for the set of 4. Lang’s 1-800-872-7871

Last post

Email sent

1 Replies

305 Views

Last post by Gleaner
Tue Jan 13, 2026 3:38 pm
FS: J. J. Miller Tire Tool for Clincher and Balloon Tires

Last post by WaltM « Tue Jan 13, 2026 1:29 pm
Replies: 1
by WaltM » Tue Jun 03, 2025 7:58 am

First post

For sale J. J. Miller Tire Tool for Clincher and Balloon Tires. Tool is used to remove and install clincher and balloon tires. The jaws are used to break the bead and the swivel end is used to remove and install the tire. Tool measures 21-1/2 inches in length. Price $140 plus shipping. Call or text (248) 894-75fiveone. Thanks, Walt

Last post

to the top

1 Replies

1560 Views

Last post by WaltM
Tue Jan 13, 2026 1:29 pm
FS: Marquette Mfg Co. Clincher Tire Tool

Last post by WaltM « Tue Jan 13, 2026 1:28 pm

by WaltM » Tue Jan 13, 2026 1:28 pm

For sale Marquette Mfg Co. clincher tire tool. Tire tool for removing and installing clincher tires. Price $160 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

190 Views

Last post by WaltM
Tue Jan 13, 2026 1:28 pm
FS Ford TT 4069 Tire Iron SOLD

Last post by Charlie_26_TT_Ccab « Mon Jan 12, 2026 11:57 pm
Replies: 1
by Tparts » Mon Jan 12, 2026 8:37 pm

First post

For Sale is an original Ton Truck Tire Iron supplied by Ford for Ton Truck rear tire changes. SOLD plus shipping Lang’s 1-800-872-7871

Last post

Email sent.

1 Replies

269 Views

Last post by Charlie_26_TT_Ccab
Mon Jan 12, 2026 11:57 pm
FS Ford U-Joint Entering Tool 5Z-196 SOLD

Last post by Bill Everett « Mon Jan 12, 2026 11:48 pm
Replies: 1
by Tparts » Mon Jan 12, 2026 8:14 pm

First post

For Sale is an original Ford 5Z-196 U-Joint installation tool. It is used to turn the u-joint allowing it to be installed into the back of the engine. SOLD plus shipping Lang’s 1-800-872-7871

Last post

E-Mail sent.

1 Replies

334 Views

Last post by Bill Everett
Mon Jan 12, 2026 11:48 pm
Fairbanks screw press

Last post by Mark Chaffin « Mon Jan 12, 2026 10:56 pm
Replies: 4
by RGould1910 » Mon Jan 12, 2026 11:14 am

First post

Same press as illustrated throughout the Ford Service Manual. Smooth action, no thread wear. Local pick up. $750. Will sell stand with press only. Negotiable. Contact me by email through the website and leave your contact info
Richard Gould
20260112_074942.jpg 20260112_075840.jpg
20240315_112718.jpg
20260112_092541.jpg

Last post

Yes. It is exactly the same tool as dad's. Probably the most useful of them all. Very rare and hard to find. Well worth the asking price.

4 Replies

527 Views

Last post by Mark Chaffin
Mon Jan 12, 2026 10:56 pm
Spot light

Last post by jawa « Mon Jan 12, 2026 8:40 pm

by jawa » Mon Jan 12, 2026 8:40 pm

The overall height is 14 , 11 diameter and the lens needed looks to be about 9 1/4 . Would work great on a T fire truck. $225 plus shipping.

0 Replies

182 Views

Last post by jawa
Mon Jan 12, 2026 8:40 pm
FS Ford Rear Axle Pinion Nut Wrench 5Z-165 SOLD

Last post by Pep C Strebeck « Mon Jan 12, 2026 8:31 pm
Replies: 1
by Tparts » Mon Jan 12, 2026 8:29 pm

First post

For Sale is an original Ford 5Z-165 Rear axle Pinion Gear Nut T Wrench. SOLD plus Shipping Lang’s 1-800-872-7871

Last post

PM sent on wrench.

1 Replies

227 Views

Last post by Pep C Strebeck
Mon Jan 12, 2026 8:31 pm
Wanted One 1915-27 Electric Headlamp Rim In Poor Condition

Last post by J1MGOLDEN « Mon Jan 12, 2026 8:14 pm
Replies: 6
by ModelTWoods » Fri Jan 09, 2026 4:39 pm

First post

Wanted: One 1915-27 electric headlamp rim in unusable condition. MUST have at least ONE usable bracket on backside with usable tabs. Rest of rim, unimportant, as I will cannibalize rim for one lens bracket. Willing to pay shipping. Contact me through this site's messenger.

Last post

I have a box of six or eight of those, I didn't know they were different.

Show me a photo and I''ll show you what I have in the box.

6 Replies

393 Views

Last post by J1MGOLDEN
Mon Jan 12, 2026 8:14 pm
FS Homemade Starter Bendex Head Puller $20.00

Last post by Tparts « Mon Jan 12, 2026 7:45 pm

by Tparts » Mon Jan 12, 2026 7:45 pm

For Sale is a well made version of Fords 5Z-323. Original version not included. $20.00 plus shipping. Lang’s 1-800-872-7871

0 Replies

194 Views

Last post by Tparts
Mon Jan 12, 2026 7:45 pm
FS Starter Bendex Head Puller SOLD

Last post by Tparts « Mon Jan 12, 2026 7:35 pm

by Tparts » Mon Jan 12, 2026 7:35 pm

For Sale is a Starter Bendex Head Puller. Marked with a Ford Script and 5Z-323. SOLD plus shipping. Lang’s 1-800-872-7871

0 Replies

154 Views

Last post by Tparts
Mon Jan 12, 2026 7:35 pm
1923 Engine with free delivery to Luray Swap meet

Last post by G.ARMS86 « Mon Jan 12, 2026 5:52 pm
Replies: 7
by G.ARMS86 » Wed Jul 23, 2025 9:50 pm

First post

Selling a July of ‘23 complete engine has compression. I have not tried to start it. Also has flat belt pulley attachment on transmission asking $550 or best reasonable offer. Serial number is 8,013,561. Please call or text George 2036873827 local pickup only located in Connecticut

Last post

Back to top

7 Replies

2367 Views

Last post by G.ARMS86
Mon Jan 12, 2026 5:52 pm
A few new Wizard/Simmons/Duplex parts coming in the Spring

Last post by Scott_Conger « Mon Jan 12, 2026 3:27 pm
Replies: 1
by Scott_Conger » Wed Dec 31, 2025 4:54 pm

First post

Response to my query recently was so bad that I am not planning on many parts, yet there was one fellow who seemed excited about the prospect, so I decided to proceed with a VERY small number of parts (like 4 or 5 each and that's it...)

I finished up a couple and will do the rest in the spring time

If you're interested in either needles or...

Last post

In 2 weeks, only 3 people have expressed any interest, solidifying my position that demand is statistically pretty much non-existent.

This is your one last chance to get on the list for a very limited number of parts.

If interested, EMAIL ME

thank you

1 Replies

381 Views

Last post by Scott_Conger
Mon Jan 12, 2026 3:27 pm
FS: EKERN Rear Axle Emergency Repair Fixture (1909-1925)

Last post by RajoRacer « Mon Jan 12, 2026 3:00 pm
Replies: 3
by WaltM » Fri Nov 07, 2025 2:14 pm

First post

For sale EKERN rear axle emergency repair axle fixture. Fixture axle rotates smoothly And threads are in great shape. Grease cup was filled with synthetic grease for long life. Clamps onto backing plate. Used as a temporary fix to get you home after an axle break. Works on small backing plate axles only. Price $175. plus shipping. Call or text...

Last post

It's in his ad.

3 Replies

576 Views

Last post by RajoRacer
Mon Jan 12, 2026 3:00 pm
FS 1923-25 TOURING TOP SOCKETS

Last post by got10carz « Mon Jan 12, 2026 2:05 pm

by got10carz » Mon Jan 12, 2026 2:05 pm

For Sale, nice looking touring 23- 25 top sockets. $250. Call for more pictures. Steve 701 212 5009

0 Replies

150 Views

Last post by got10carz
Mon Jan 12, 2026 2:05 pm
FS: EKERN Emergency Rear Axle Fixture (1909-1927)

Last post by WaltM « Mon Jan 12, 2026 1:55 pm

by WaltM » Mon Jan 12, 2026 1:55 pm

For sale EKERN emergency rear axle fixture. Axle rotates smoothly. Grease cup is filled with synthetic grease for long life. Threads are in good shape. Used as a temporary fix to get you home after an axle break. Price $150. plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

180 Views

Last post by WaltM
Mon Jan 12, 2026 1:55 pm
FS Accessory RB Toolbox w/brass hasp SOLD

Last post by slang250 « Mon Jan 12, 2026 1:52 pm
Replies: 2
by Tparts » Thu Jan 08, 2026 7:20 pm

First post

For Sale is a dainty toolbox that would be mounted on the running board or body. Hasp is Brass and the box is very solid. There are some extra holes by the hasp as shown in the photos. SOLD plus shipping. Lang’s 1-800-872-7871

Last post

Tool box has been sold.

2 Replies

441 Views

Last post by slang250
Mon Jan 12, 2026 1:52 pm
FS: Large 3 Tier Black/Brass Cowl Lamp

Last post by George House « Mon Jan 12, 2026 11:52 am
Replies: 1
by George House » Fri Jan 09, 2026 4:46 pm

First post

No name. Beautiful brass & glass. No cracks or dents. Has burner. Entire chimney nickel plated brass as is entire font
Beautiful multifaceted glass in rear. Only $110 + the ride.
gwhouse731(at)gmail(dot)com

Last post

**price reduced**

1 Replies

213 Views

Last post by George House
Mon Jan 12, 2026 11:52 am
FS: Excellent E&J Black/Brass Taillamp

Last post by George House « Mon Jan 12, 2026 11:51 am
Replies: 1
by George House » Fri Jan 09, 2026 4:55 pm

First post

Pat’ Dec 9, 1908…Original paint and perfect condition. Complete. No cracks in glass or brass. Believe for 1913-1914 Ford. Only $180 + shipping.
gwhouse731(at)gmail(dot)com. First caller gets it

Last post

**price reduced**

1 Replies

231 Views

Last post by George House
Mon Jan 12, 2026 11:51 am
(SOLD) Stevens Spindle Bushing Re-facer

Last post by WaltM « Mon Jan 12, 2026 10:04 am

by WaltM » Mon Jan 12, 2026 10:04 am

SOLD Stevens spindle bushing re-facer. Marked STEVENS NO. T-290 . Threads are in good shape. Price $285. plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

229 Views

Last post by WaltM
Mon Jan 12, 2026 10:04 am
(SOLD)Stevens Drive Shaft Sleeve Puller

Last post by WaltM « Mon Jan 12, 2026 9:56 am

by WaltM » Mon Jan 12, 2026 9:56 am

(SOLD) Stevens drive shaft sleeve puller. All threads are in good condition. Price $300 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

186 Views

Last post by WaltM
Mon Jan 12, 2026 9:56 am
(SOLD) Stevens Piston Vise

Last post by WaltM « Mon Jan 12, 2026 9:51 am

by WaltM » Mon Jan 12, 2026 9:51 am

(SOLD) Stevens piston vise. Good threads and jaws (lead). Price $150 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

202 Views

Last post by WaltM
Mon Jan 12, 2026 9:51 am
(SOLD) Stevens Generator Gear Puller

Last post by WaltM « Mon Jan 12, 2026 9:45 am

by WaltM » Mon Jan 12, 2026 9:45 am

(SOLD) Stevens generator gear puller. Good threads. Price $165 plus shipping. Email, call or text (248) 894-75fiveone. Thanks, Walt

0 Replies

170 Views

Last post by WaltM
Mon Jan 12, 2026 9:45 am
True Fire set up

Last post by Wingnut « Mon Jan 12, 2026 9:03 am
Replies: 2
by Wingnut » Fri Jan 09, 2026 6:35 pm

First post

Got this with a car we bought, don't need it, I'm asking $300 it is all there plug and play if you will. interested can text me at three three zero 2four1 two6four 1.

Last post

True Fire going to Peter, thanks MTFCA... Wingnut

2 Replies

418 Views

Last post by Wingnut
Mon Jan 12, 2026 9:03 am
Warford Transmission Tailshaft Nut Tool

Last post by drzomber « Sun Jan 11, 2026 9:43 pm

by drzomber » Sun Jan 11, 2026 9:43 pm

These are machined from 6061 aluminum and fit the back nut on an aluminum Warford transmission. $60.00 shipped!

You can DM me to purchase or get one at rawaequipped.com

IMG_2719.jpeg IMG_2718.jpeg IMG_2721.jpeg

0 Replies

212 Views

Last post by drzomber
Sun Jan 11, 2026 9:43 pm
WTB Rear Wire Wheel, Hub, and Cap.

Last post by Tparts « Sun Jan 11, 2026 5:54 pm

by Tparts » Sun Jan 11, 2026 5:54 pm

I’m in need of one rear hub, Hubcap, and 2 Wheels.
Lang’s 1-800-872-7871

0 Replies

153 Views

Last post by Tparts
Sun Jan 11, 2026 5:54 pm
Bell Cranks NOS

Last post by Dan Hatch « Sun Jan 11, 2026 5:42 pm
Replies: 3
by Dan Hatch » Sat Jan 10, 2026 2:04 pm

First post

Here are some bell cranks that are Nos. See pictures. &10 each + shipping. Email me by forum. Dan
IMG_5133.jpeg

Last post

Have not gotten your email. Dan

3 Replies

507 Views

Last post by Dan Hatch
Sun Jan 11, 2026 5:42 pm
FS RARE Kingston “6 Ball” Carburetor, $1500.00

Last post by Tparts « Sun Jan 11, 2026 4:40 pm
Replies: 12
by Tparts » Mon Oct 27, 2025 10:31 pm

First post

Very Rare Kingston “Six Ball” Rebuilt by Russ Potter. $1500.00 plus shipping.
Lang’s 1-800-872-7871

Last post

Incredibly rare

12 Replies

1841 Views

Last post by Tparts
Sun Jan 11, 2026 4:40 pm
FS “FRONTY” Script for the Radiator $49.95

Last post by Tparts « Sun Jan 11, 2026 4:38 pm
Replies: 1
by Tparts » Thu Jan 08, 2026 7:12 pm

First post

For Sale are “Fronty” Script that mounts to the radiator core. Mounting hardware is NOT included. Available in solid brass or stainless. $49.95 plus shipping Lang’s 1-800-872-7871

Last post

To the top

1 Replies

302 Views

Last post by Tparts
Sun Jan 11, 2026 4:38 pm
WTD top hood

Last post by andrew o sullivan « Sun Jan 11, 2026 2:51 pm

by andrew o sullivan » Sun Jan 11, 2026 2:51 pm

WTD looking for used ,top for 1913 touring car. i have a real nice car very original car i have a new top but id like a good used one that i can fit to the car, if i put the new one on it might ,not, look right .

0 Replies

117 Views

Last post by andrew o sullivan
Sun Jan 11, 2026 2:51 pm
FS - Rebuilt - /- ECCT Calibrated Ignition Coil Sets.... SOLD

Last post by Moxie26 « Sun Jan 11, 2026 2:51 pm
Replies: 23
by Moxie26 » Mon Sep 08, 2025 6:26 pm

First post

:D Four freshly rebuilt Ford ignition coils in each set. Selected better wood cases cleaned and coated with linseed oil mixture, secondary and primary internal coils tested and condensers replaced with orange drop capacitors, wire connections twist and soldered...... repotted with hot tar as necessary. ..... Coil hardware cleaned and reused. New...

Last post

All offered sets of rebuilt coils have been SOLD . ...along with two other sets that I had stored for my own use. Just an up-date, still accepting for evaluation and calibration.

23 Replies

3472 Views

Last post by Moxie26
Sun Jan 11, 2026 2:51 pm
Kingston 4-ball carburetor

Last post by Corey Walker « Sun Jan 11, 2026 2:13 pm
Replies: 2
by Corey Walker » Wed Jan 07, 2026 2:42 pm

First post

Completely disassembled and cleaned, viton tipped needle and seat conversion, little to no wear on throttle shaft with bushings installed top and bottom, new choke spring, reconditioned spray needle, test run. $450 postpaid to continental USA email: wlkma9@gmail.com

Last post

Back to top.

2 Replies

216 Views

Last post by Corey Walker
Sun Jan 11, 2026 2:13 pm
WTB - 1926/27 Hubs and Wood Wheels

Last post by South Park Zephyr « Sun Jan 11, 2026 12:58 pm
Replies: 1
by cijames5380 » Sun Jan 11, 2026 11:54 am

First post

Hi, Looking to buy a full set of good 26/27 Wood Wheels and Hubs. Happy to pay for shipping to Chicago.

Thanks

Last post

I have a set in St. Louis
Scott

1 Replies

131 Views

Last post by South Park Zephyr
Sun Jan 11, 2026 12:58 pm
FS Ford script oil can an holder

Last post by YellowTRacer « Sun Jan 11, 2026 1:16 am

by YellowTRacer » Sun Jan 11, 2026 1:16 am

No dents original Ford script oil can and holder. Real nice condition. You won't find a better one. Price drop $125.00 plus shipping.

Ed aka #4

0 Replies

212 Views

Last post by YellowTRacer
Sun Jan 11, 2026 1:16 am
FS Original coil tester

Last post by YellowTRacer « Sun Jan 11, 2026 1:05 am

by YellowTRacer » Sun Jan 11, 2026 1:05 am

Model T Ford coil tester. this is a rare nice original oak varnished wood coil tester. Big price drop $150.00. plus shipping. I definitely want to sell it.

0 Replies

208 Views

Last post by YellowTRacer
Sun Jan 11, 2026 1:05 am
FS SPARKPLUGS SOLD

Last post by Joe Voller « Sat Jan 10, 2026 9:31 pm
Replies: 5
by Tinner12 » Sat Dec 27, 2025 8:26 am

First post

ASSORTMENT OF USED SPARK plugs plus parts shipping included domestic

Last post

Got the plugs, thank you. got the plugs before you got my check i am sure. Its wonderful that we are a trust-able bunch.

5 Replies

674 Views

Last post by Joe Voller
Sat Jan 10, 2026 9:31 pm
Windshield frame Cones FS

Last post by Shannon_in_Texas « Sat Jan 10, 2026 7:56 pm
Replies: 1
by Dan Hatch » Sat Jan 10, 2026 2:02 pm

First post

Here is a set of Windshield cones nuts snd filler blocks. Maybe NOS not sure. Blocks are. $35 + shipping. Email me by forum. Dan
IMG_5146.jpeg
IMG_5147.jpeg

Last post

Email sent— thanks!

1 Replies

253 Views

Last post by Shannon_in_Texas
Sat Jan 10, 2026 7:56 pm
Windshield filler NOS FS

Last post by Shannon_in_Texas « Sat Jan 10, 2026 7:56 pm
Replies: 1
by Dan Hatch » Sat Jan 10, 2026 1:56 pm

First post

Here are a pair of windshield filler plugs for lower frame 23/25 open car. Part number 7803brx. This is the piece that goes in the end of windshield frame so the cap can fasten on and the frame can be bolted to the uprights. When was last time you saw a pair of them NOS? $15 for pair + shipping. Email me by forum. Dan
IMG_5126.jpeg...

Last post

Email sent— thanks!

1 Replies

235 Views

Last post by Shannon_in_Texas
Sat Jan 10, 2026 7:56 pm
Rebuilt ECCT calibrated Coils..... SOLD

Last post by Moxie26 « Sat Jan 10, 2026 6:52 pm
Replies: 7
by Moxie26 » Wed Dec 17, 2025 6:29 pm

First post

This is the last set I have available this year. This is an outright sale of 4 coil cores with new replacement orange drop condensers, new KW style point sets, ECCT calibrated for equal firing time. .... $425.00 USA shipping included.

Last post

Payment received today, will ship on Monday. Thank you very much and enjoy!

7 Replies

769 Views

Last post by Moxie26
Sat Jan 10, 2026 6:52 pm
Sold..........

Last post by GGZ « Sat Jan 10, 2026 6:06 pm
Replies: 8
by GGZ » Thu Jan 08, 2026 2:09 pm

First post

Sold!!!!!!

Last post

Sold........

8 Replies

878 Views

Last post by GGZ
Sat Jan 10, 2026 6:06 pm
WTB: Axle Housing Cradle Tool

Last post by TRDxB2 « Sat Jan 10, 2026 11:44 am
Replies: 5
by Scott C. » Fri Jan 09, 2026 9:08 pm

First post

I am wanting to buy one of these axle cradle tools that mount to a bench and holds the rear axle housing for assembly. Apparently, the vendors don't sell them anymore. Does anybody have one that they are willing to let go of?

Last post

Biscuit joined to 2 x6 & cut out the end like Steve Jelf's above. Then just clamped onto my power miter-box stand. Easy set up and take apart when not in use
differential.jpg
cradle.jpg
--
--
had a damaged axle (key chipped out) and used to peen brake cam
--
Peening Support.jpg

5 Replies

436 Views

Last post by TRDxB2
Sat Jan 10, 2026 11:44 am
Stewart model 12 speedometer

Last post by G.ARMS86 « Sat Jan 10, 2026 7:58 am
Replies: 1
by G.ARMS86 » Tue Dec 30, 2025 9:57 am

First post

Selling this Stewart model 12 50 mph speedometer with mileage tracker used only in 1909 on model t’s asking price is 400 plus shipping. Unknown internal condition. Please call or text George 2036873827

Last post

Back to the top

1 Replies

361 Views

Last post by G.ARMS86
Sat Jan 10, 2026 7:58 am
TT rear hubcap - larger size (sold)

Last post by Bmettli « Sat Jan 10, 2026 6:42 am
Replies: 2
by Bmettli » Fri Jan 09, 2026 8:30 pm

First post

Hi, here’s an original nickel TT hubcap. As you can see in the photo it’s much bigger than the standard size!

$10 + $7 shipping. I’m in Dayton, OH. My regular hubcap is on the right and just for reference, that’s not included. Thanks!

Last post

Sold to Ed - thanks!

2 Replies

169 Views

Last post by Bmettli
Sat Jan 10, 2026 6:42 am
WTB Dayton #3 Knock on hub cap for pattern

Last post by Mark Herdman « Sat Jan 10, 2026 1:00 am
Replies: 2
by Mark Herdman » Thu Mar 27, 2025 2:05 am

First post

WTB Dayton #3 pin drive Knock on hub cap for pattern to cast a set of new ones for my Fronty. Damaged ok.

Still looking for at least a body filler impression of the wording and top profile of this cap or buy a readable cap.

Any help appreciated. Thanks to the member here for the use of the photos.

Have a USA address to post to. No overseas...

Last post

Still looking for at least a body filler impression of the wording and top profile of this cap or buy a readable cap. Have a USA address to post to.

2 Replies

2179 Views

Last post by Mark Herdman
Sat Jan 10, 2026 1:00 am
For Sale: 1908-1912ish Brass Headlamps

Last post by GGZ « Fri Jan 09, 2026 9:00 pm
Replies: 1
by GGZ » Fri Jan 09, 2026 8:59 pm

First post

A nice, unrestored pair of headlamps that would date to about 1908-1912. The approximate measurements are 9 1/4 in diameter and height and 8 in depth and 7 1/2 inches between the fork mounting holes. There is no name on these so they can be used on any car. One has a broken reflector and the other one is missing a plain lens. There are a couple of...

Last post

More photos.....

1 Replies

253 Views

Last post by GGZ
Fri Jan 09, 2026 9:00 pm
FS: Unlikely Pair Jno Brown Model 110 Cowl

Last post by George House « Fri Jan 09, 2026 5:25 pm

by George House » Fri Jan 09, 2026 5:25 pm

Lamps. The one on the right (with magnet) has unusual steel top but otherwise complete with brass top font and burner. No cracks in glass or brass. The other, left side 110, has a dent in black painted top of chimney and back panel. This one has no burner an no cracks in glass or brass Best offer over $200 + shipping until 25 January....

0 Replies

215 Views

Last post by George House
Fri Jan 09, 2026 5:25 pm
Wheels for sale with free delivery to Luray swap meet

Last post by G.ARMS86 « Fri Jan 09, 2026 3:51 pm
Replies: 21
by G.ARMS86 » Sun Aug 17, 2025 12:20 pm

First post

A bunch of wheels for sale. All need hubs most are in ok shape. Asking $25 each plus shipping or local pickup. Please call or text only George 2036873827

Last post

Back to the top

21 Replies

4122 Views

Last post by G.ARMS86
Fri Jan 09, 2026 3:51 pm
FS Late 1911-12 Transmission w/pedals SOLD

Last post by slang250 « Fri Jan 09, 2026 3:18 pm
Replies: 1
by Tparts » Thu Jan 08, 2026 7:31 pm

First post

For Sale is a late 1911-1912 Transmission Cover (hogshead) complete with all the linkage and petals. It is in very good condition and doesn’t show any repairs or damage. SOLD plus shipping. Lang’s 1-800-872-7871

Last post

transmission cover is sold.

1 Replies

302 Views

Last post by slang250
Fri Jan 09, 2026 3:18 pm
FS GARAGE SALE

Last post by Mark Chaffin « Fri Jan 09, 2026 1:11 pm
Replies: 8
by Mark Chaffin » Wed Jan 07, 2026 2:24 pm

First post

Time to do a little early spring cleaning at the garage. All items are pick up in Lake Elsinore. Mark Chaffin (951) 805-0928

20260107_102120.jpg
Assortment of 21 demountable rims $75 each.

20260107_102137.jpg
Four 24 30x3 non demountable rims. Two good. Two very good. $75 each

20260107_102200.jpg
One 450x21 tire and demountable rim. Four...

Last post

Radiator has been sold. Thank you

8 Replies

1009 Views

Last post by Mark Chaffin
Fri Jan 09, 2026 1:11 pm
FS 1909-10 Brass Steering Wheel Spider SOLD

Last post by slang250 « Fri Jan 09, 2026 12:16 pm
Replies: 1
by Tparts » Wed Jan 07, 2026 9:49 pm

First post

For Sale is an original 1909 - 1910 Dodge Bros. brass steering wheel spider. Good restorable condition. SOLD plus shipping. Lang’s 1-800-872-7871

Last post

Steering wheel spider is sold. Thank You

1 Replies

323 Views

Last post by slang250
Fri Jan 09, 2026 12:16 pm
WTB Cowl Vent Assembly

Last post by micshotrodgarage « Fri Jan 09, 2026 11:49 am
Replies: 1
by Tadpole » Fri Jan 09, 2026 6:15 am

First post

Looking for a Cowl Vent Assembly to fit a 1925 Coupe, thank you!

Last post

Tad, I can send a picture of one I have. Can you give me a regular E mail address to send a photo to you. Mike

1 Replies

206 Views

Last post by micshotrodgarage
Fri Jan 09, 2026 11:49 am
FS 11-12 FORE DOORS

Last post by KWTownsend « Fri Jan 09, 2026 11:39 am
Replies: 3
by got10carz » Wed Jan 07, 2026 4:53 pm

First post

For Sale late 11 early 12 fore doors. $300. Can send more pictures. Steve 701 212 5009

Last post

Steve,
Yes. The body number is stamped in the bottom of the passenger door in 1/2 numbers. Here is mine:

1911 foredoor body number 3 close.jpg

The bottom was sanded down significantly. Fortunately, a correct size stamp was available to refresh it.

1911 body number under front door.jpg

Do you know where the body is that these fore-doors...

3 Replies

448 Views

Last post by KWTownsend
Fri Jan 09, 2026 11:39 am
Economy manifold

Last post by RichJ « Fri Jan 09, 2026 5:24 am

by RichJ » Fri Jan 09, 2026 5:24 am

Very good condition, hoping someone can use it.
See pictures 250.00 make offer.

0 Replies

285 Views

Last post by RichJ
Fri Jan 09, 2026 5:24 am

New Topic

10406 topics

Page 1 of 105
- Jump to page:
1
2
3
4
5
…
105
Next

Return to Board Index

Forum permissions

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum