Willys MB
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 550
- Joined: Sun Jan 06, 2019 12:32 pm
- First Name: George
- Last Name: Mills
- * REQUIRED* Type and Year of Model Ts owned: 1915 Roadster, 1919 Hack, 1925 Fordor
- Location: Cherry Hill NJ/Anona Largo FL
- MTFCA Number: 29497
- MTFCI Number: 10032
- Board Member Since: 1999
Willys MB
Hi all,
Family story. Picture shown is my son at a car show in Florida.
His grandfather had found a ratty MB sometime in the 50’s. He kept it ratty, and we used it to ride around in the swamp behind his house.
He was one of the original 4 founders of MVCC/MVPA. In 1975 or so he took the swamp MB and did a spray-storation and this was his IWO jeep that got flat towed everywhere. He was an IWO Marine. It looked good, but the frame rails were Swiss cheese, etc.
It passed directly to my son who has had it restored right having the frame spliced where needed, rather than just replacing the frame.
Anyhow, I’m proud of him for it (he now is suggesting that I send him the 15...lol)
My question, there is one, would anyone know what went in that steel pouch on the underside of the hood? Once I learn, I’ll go find him one
Thanks in advance
Family story. Picture shown is my son at a car show in Florida.
His grandfather had found a ratty MB sometime in the 50’s. He kept it ratty, and we used it to ride around in the swamp behind his house.
He was one of the original 4 founders of MVCC/MVPA. In 1975 or so he took the swamp MB and did a spray-storation and this was his IWO jeep that got flat towed everywhere. He was an IWO Marine. It looked good, but the frame rails were Swiss cheese, etc.
It passed directly to my son who has had it restored right having the frame spliced where needed, rather than just replacing the frame.
Anyhow, I’m proud of him for it (he now is suggesting that I send him the 15...lol)
My question, there is one, would anyone know what went in that steel pouch on the underside of the hood? Once I learn, I’ll go find him one
Thanks in advance
-
- Posts: 730
- Joined: Mon Oct 21, 2019 9:43 pm
- First Name: Danny
- Last Name: Deaton
- Location: Ohio
Re: Willys MB
I will be with a buddy of mine tomorrow who has one
Same model restored and I will ask him
Same model restored and I will ask him
-
- Posts: 1960
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Juhl
- * REQUIRED* Type and Year of Model Ts owned: 1917 Touring
- Location: Thumb of Michigan
- MTFCA Number: 50297
- MTFCI Number: 24810
- Board Member Since: 2018
Re: Willys MB
Lube chart holder
From http://wwiijeepparts.com/Archives/WWIIJeepTools.html
"Later in the war both Willys and Ford issued a heavy metal sleeve holder that was folded and crimped along both long edges and one short edge. the final edge was left open so the Lubrication Chart could be slipped inside. The open end was also notched so that a person could get a grip on the Lube Chart and extract it. At the bottom were 2 drain holes and 2 small rubber snubbers that applied tension and kept the chart inside the holder. The Holder was them bolted to the underside of the hood on the driver's side."
From http://wwiijeepparts.com/Archives/WWIIJeepTools.html
"Later in the war both Willys and Ford issued a heavy metal sleeve holder that was folded and crimped along both long edges and one short edge. the final edge was left open so the Lubrication Chart could be slipped inside. The open end was also notched so that a person could get a grip on the Lube Chart and extract it. At the bottom were 2 drain holes and 2 small rubber snubbers that applied tension and kept the chart inside the holder. The Holder was them bolted to the underside of the hood on the driver's side."
1917 Touring
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
-
Topic author - Posts: 550
- Joined: Sun Jan 06, 2019 12:32 pm
- First Name: George
- Last Name: Mills
- * REQUIRED* Type and Year of Model Ts owned: 1915 Roadster, 1919 Hack, 1925 Fordor
- Location: Cherry Hill NJ/Anona Largo FL
- MTFCA Number: 29497
- MTFCI Number: 10032
- Board Member Since: 1999
Re: Willys MB
The knowledge on this site is fantastic. Thanks
I was able to find a repro on line. Already ordered.
I was able to find a repro on line. Already ordered.
-
- Posts: 730
- Joined: Mon Oct 21, 2019 9:43 pm
- First Name: Danny
- Last Name: Deaton
- Location: Ohio
Re: Willys MB
That’s what he said
-
- Posts: 2345
- Joined: Sun Jan 06, 2019 11:25 am
- First Name: Dave
- Last Name: Hanlon
- * REQUIRED* Type and Year of Model Ts owned: 24 Touring car
- Location: NE Ohio
- MTFCA Number: 50191
- Board Member Since: 2018
Re: Willys MB
A family friend had an early Bantam Jeep when I was a kid. He had it at a campground we were at with the T club one year and his son and I drove it all around the place. It was a real blast for a 14 year old kid.
American Bantam was the designer of the Jeep, but lost the contract before the war to Willys due to the size of the company. The government felt they were too small to be able to supply the military.
After the war broke out. Bantam, Ford, Willys and others all produced for the war effort.
https://americanhistory.si.edu/collecti ... mah_841492
American Bantam was the designer of the Jeep, but lost the contract before the war to Willys due to the size of the company. The government felt they were too small to be able to supply the military.
After the war broke out. Bantam, Ford, Willys and others all produced for the war effort.
https://americanhistory.si.edu/collecti ... mah_841492
-
- Posts: 1443
- Joined: Sun Nov 24, 2019 2:29 pm
- First Name: Ed
- Last Name: Martin
- * REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1909 Touring
- Location: Idaho
Re: Willys MB
That’s neat. I have an original 1942 Harley WLA Liberator that I’ve been putting together