MTFCA Forum

I think it would be nice if those of us who will have spaces at Chickasha list them here with our forum name and our real names. That way we can stop by and say hi. Some of yall have been in the Model T world for a long time and know each other well, but a lot of us haven't and it'd be nice to have a list to use while walking the meet.

I'll start it out. Forum name first, then your real name, then your Chickasha location/space #.

I'll put all the replies together in one list before the meet...then you can print it out and bring it with you.


rustyfords, Don Allen, South Bldg SG4

Dobro1956. Donnie Brown south building
Spaces SL 11, 12, 13, and. 14

Looks like Im gonna make it there. Why dont you put a sign on your booth, MTFCA member. I know that would help me. Better than a tatoo! See you there!

SM 4 & 5 South Building

Steve Robbins FG17

Gentlemen:
will be in south building spaces SL 4 , SL5 with my linebores , Babbitt bearing molds , several Atwater -Kent and Thomas distributors and possibly my own design direct drive front mount distributor and some other small items … look forward to Chickasha every year and look forward to the continuing meets … always an optimist Gene French

Ed Donnelly and Jerry Young , south building SG 12

Rustyfords - what a great idea.

This will be my first Chickasha visit but, hopefully, not the last.

R.V. Anderson, R.V. Anderson, NF 9 & 10. Inside North building on the west end.

i will be there but no spaces.i would like to bring stuff like the old days, i still have lots to sell.i will make free delivers on pre sold parts.call me or stop buy on the way 417-394-2788 charley shaver

I (Tony Bowker) will be in the North building at NJ 5
I’ll have some used Ruckstell bits and what is left over from the 1909 Touring restoration.

Spaces FH 19 and 20.
West side of the center building. Be there along with Perry Swanson, out of GA.

Expect to collect some more of Steve Jelf's folding money too Was hard to pry that fiver from Mr. Thrifty.

Dan: FYI. The bridge in downtown B’ham is back open.

Thanks Dan!

Sure has been a bear over the last couple of years with the interstate junction exchange constructions

FM 1 & 2
Looking forward to seeing everyone and all their treasures.

I will be in the North Building, spaces NA5 and NA6. I will have McLaren wire wheels, restored Buffalo wire wheels, other wire wheels, and various T parts. See ya there. Mike

the $1.00 table was 2015,sold $100.00 off of it,sure like to do that again,ha,ha. charley

I'll be there inside the North West building in spaces ND 10 and ND 11. Will have some speedometer stuff and leather products. I look forward to seeing everyone at the swap meet. Russ Furstnow

Not long now
Here is my wanted list all the way from Australia

26/27 front guards good condition
26/27 rear guards touring/ Tudor
26/27 bonnet
Front wire wheel hub x 1
Rear wire hub x 1
LHD handbrake
LhD steering brackets Tudor
27 headlight bucket
Brackets 15 tourer body
15 seat frames
LHD 15 pedals ribbed
26/27 chassis brackets front
Accessory wire wheels

Tracer wrote: ↑

Tue Feb 25, 2020 3:28 am

Not long now
Here is my wanted list all the way from Australia

26/27 front guards good condition
26/27 rear guards touring/ Tudor
26/27 bonnet
Front wire wheel hub x 1
Rear wire hub x 1
LHD handbrake
LhD steering brackets Tudor
27 headlight bucket
Brackets 15 tourer body
15 seat frames
LHD 15 pedals ribbed
26/27 chassis brackets front
Accessory wire wheels

I have a LHD handbrake with the cross-shaft attached. It came off of a 1925 chassis. It's yours free if you want it.

My space is SG4 in the South Building.

Thanks Don I will take you up on that
See you in about 3 weeks
Cheers
Andrew Webb

Don't Forget just three weeks away!
The Chickasha Pre-War Swap Meet Pizza Party at noon Friday March 20th at the West side of the North Building swap space NH 8-10.
Sponsored by Don Lang, John Regan and Ron Patterson and everyone is invited to join.
We will also have for sale at a special reduced price first edition copies of the new Model T Ford Club of America publication “HCCT Booklet”; 90+ pages of everything you ever wanted to know about Hand Cranked Coil Testers
See you all there.
Don Lang, John Regan & Ron Patterson