MTFCA Forum

Posted: **Sun Feb 16, 2020 1:35 pm**

In the photo below, the clutch arms are retained on the shaft by bolts - not riveted.
This is in an aluminum hogshead without the reinforcing ribs (early).
What year hogshead would this be?

Posted: **Sun Feb 16, 2020 1:53 pm**

About june 1911- 1912/13 ish which would fit with non reinforced hogs head. Don't forget the shaft and arms are keyed.

Posted: **Sun Feb 16, 2020 3:22 pm**

Thanks Mark.
PDX wins again

MTFCA Forum

Early Clutch Arm Bolts

Early Clutch Arm Bolts

Re: Early Clutch Arm Bolts

Re: Early Clutch Arm Bolts