Speedster Tool Box
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Jeepbone1
Topic author - Posts: 596
- Joined: Sun Jan 06, 2019 6:10 pm
- First Name: Brad
- Last Name: Kirtner
- * REQUIRED* Type and Year of Model Ts owned: 1924 Touring Car, 1927 Closed Cab TT, 1927 Coupe
- Location: Salem, Virginia
- MTFCA Number: 50618
- Board Member Since: 2018
Speedster Tool Box
Finished up a three day project today. Finally after eight months of driving my speedster I got my butt in gear and got motivated to build the rear toolbox for my speedster. I may have gone a little overkill on this one but at least it has plenty of room and is solid as a rock. Final dimension ended up being 40”x15”x20” with a usable 38”x13”x15” inside space. The bottom was raised to accommodate the rear crossmember poking up through the deck. This thing is absolutely solid! And FYI it will easily hold 7 24 packs of your favorite beverages. Sure beats what little space I have just under the seat!
- Attachments
-
-
-
-
-
-
Jeepbone1
Topic author - Posts: 596
- Joined: Sun Jan 06, 2019 6:10 pm
- First Name: Brad
- Last Name: Kirtner
- * REQUIRED* Type and Year of Model Ts owned: 1924 Touring Car, 1927 Closed Cab TT, 1927 Coupe
- Location: Salem, Virginia
- MTFCA Number: 50618
- Board Member Since: 2018
Re: Speedster Tool Box
Last of the pictures. Once the rain clears, I’ll get some better pictures in the daylight. May need one final sanding and additional coat of paint at a later date.
- Attachments
-
-
-
DHort
- Posts: 2475
- Joined: Sun Jan 06, 2019 1:30 pm
- First Name: Dave
- Last Name: Hjortnaes
- * REQUIRED* Type and Year of Model Ts owned: 24 Speedster, 20 touring
- Location: Men Falls, WI
- MTFCA Number: 28762
- MTFCI Number: 22402
Re: Speedster Tool Box
Looks great Brad. You will be able to go on long trips with that box. I do not think it looks too big. Just keep an eye on that hinge if it is not solid brass.