Page 1 of 1
Rods
Posted: Tue Feb 12, 2019 12:53 am
by D.Yoder
Picking out a set of rods to bore for My 25 roadster pu
Re: Rods
Posted: Tue Feb 12, 2019 2:18 am
by Allan
Dean,that round thing on the bench in front of the stove tells me you are on the right track!
Allan from down under.
Re: Rods
Posted: Tue Feb 12, 2019 10:20 am
by D.Yoder
Allan, When I babbitt rods I start with cores that weigh +- 10 grams with the babbitt wiped out. After poring the sprue is removed and bore to 1.2 inch then weigh again. This makes it easier to get a balanced set.
Re: Rods
Posted: Tue Feb 12, 2019 4:22 pm
by Allan
Way to go Dean. I don't do my own babbit work, but I do select a set of rods of es near as possible the same weight to send off for work. Makes sense to get things as close as possible to give a good start.
Allan from down under.
Re: Rods
Posted: Wed Feb 13, 2019 8:49 am
by John Warren
Looks like a relaxing hobby
