Nine and a half years later... got a carbide generator at the Luray swap meet. Was rereading a thread where I asked about carbide generators and remember Bob Corio’s painting a picture of pleasing the crowd with magical T skills...
http://www.mtfca.com/discus/messages/17 ... 1295471465
I’ve read carbide generators were made by Victor, JNO, and some other folks. I’ve found a few pictures of Victors and they appear to have writing along the top and some a brass device at the top to approximate the drip rate. Is this generator a Corcoran or Brown possibly? I don’t see any identifying marks on it.
Thank you for your time,
Darin
13T - Carbide Generator Make
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Darin Hull
Topic author - Posts: 241
- Joined: Fri Apr 17, 2020 2:15 pm
- First Name: Darin
- Last Name: Hull
- * REQUIRED* Type and Year of Model Ts owned: 1913 Model T
- Location: Cartersville, GA
- MTFCA Number: 29699
- MTFCI Number: 25147
- Board Member Since: 2010
- Contact:
13T - Carbide Generator Make
- Attachments
-
-
-
Drkbp
- Posts: 229
- Joined: Sun Jan 06, 2019 11:28 am
- First Name: Kenneth
- Last Name: Parker
- * REQUIRED* Type and Year of Model Ts owned: 1914, 1925
- Location: Houston, Texas
Re: 13T - Carbide Generator Make
John Brown.
Does it have the insides?
Looks like a nice one.
Ken
Does it have the insides?
Looks like a nice one.
Ken
-
namdc3
- Posts: 353
- Joined: Sun Jan 06, 2019 4:15 pm
- First Name: Nikolaus
- Last Name: Martin
- Location: Kansas City
- MTFCA Number: 32342
- MTFCI Number: 23512
Re: 13T - Carbide Generator Make
Definitely Brown or E&J and not any of the others. Ken, how do you tell between Brown and E&J?
-
Darin Hull
Topic author - Posts: 241
- Joined: Fri Apr 17, 2020 2:15 pm
- First Name: Darin
- Last Name: Hull
- * REQUIRED* Type and Year of Model Ts owned: 1913 Model T
- Location: Cartersville, GA
- MTFCA Number: 29699
- MTFCI Number: 25147
- Board Member Since: 2010
- Contact:
-
Dan Haynes
- Posts: 443
- Joined: Mon Jan 07, 2019 10:37 am
- First Name: Dan
- Last Name: Haynes
- * REQUIRED* Type and Year of Model Ts owned: several
- Location: Lodi, CA
Re: 13T - Carbide Generator Make
I think Jno. Brown generators have the hooked pointer for adjustment with the circular scale showing drops per minute wherever the sharp tip of the pointer is pointing.
"The further a society drifts from truth, the more it will hate those who speak it." -George Orwell
-
namdc3
- Posts: 353
- Joined: Sun Jan 06, 2019 4:15 pm
- First Name: Nikolaus
- Last Name: Martin
- Location: Kansas City
- MTFCA Number: 32342
- MTFCI Number: 23512
Re: 13T - Carbide Generator Make
The hook style is Victor, Dan.
-
Bud Delong
- Posts: 468
- Joined: Tue Feb 26, 2019 9:09 pm
- First Name: Kenneth
- Last Name: DeLong
- * REQUIRED* Type and Year of Model Ts owned: 1914 touring,1915 roadster
- Location: Wheeler, MI
Re: 13T - Carbide Generator Make
That looks like the one on our 14 and we have all 5 Victor lamps. If you use it clean it quickly after each use!! Bud. 
-
Dan Haynes
- Posts: 443
- Joined: Mon Jan 07, 2019 10:37 am
- First Name: Dan
- Last Name: Haynes
- * REQUIRED* Type and Year of Model Ts owned: several
- Location: Lodi, CA
Re: 13T - Carbide Generator Make
You know what, Nikolaus? I think you are absolutely right.
"The further a society drifts from truth, the more it will hate those who speak it." -George Orwell
-
Drkbp
- Posts: 229
- Joined: Sun Jan 06, 2019 11:28 am
- First Name: Kenneth
- Last Name: Parker
- * REQUIRED* Type and Year of Model Ts owned: 1914, 1925
- Location: Houston, Texas
Re: 13T - Carbide Generator Make
There seem to be two variations of Victor Black & Brass generators.
A smooth top water tank (early) and an embossed (late) with the identification.
It seems the late Victor is the only Black & Brass generator used on Fords
to carry identification. Some "early" Victor's may have brass clamps but I have no pictures of that.
Anyone?
During this time, Thomas Corcoran and his brothers owned both the Victor and Corcoran Lamp Companies.
A smooth top water tank (early) and an embossed (late) with the identification.
It seems the late Victor is the only Black & Brass generator used on Fords
to carry identification. Some "early" Victor's may have brass clamps but I have no pictures of that.
Anyone?
During this time, Thomas Corcoran and his brothers owned both the Victor and Corcoran Lamp Companies.
- Attachments
-
- EARLY SMOOTH TOP MODEL
-
- VICTOR GENERATOR - EARLY.jpg (29.21 KiB) Viewed 1606 times
-
- LATE EMBOSSED MODEL