Oil drain petcock

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
User avatar

Topic author
bill goodheart
Posts: 57
Joined: Sun Jan 06, 2019 9:37 pm
First Name: William
Last Name: Goodheart
* REQUIRED* Type and Year of Model Ts owned: 1919 Touring
Location: Edwards, ny
MTFCA Number: 30991

Oil drain petcock

Post by bill goodheart » Thu Oct 15, 2020 2:00 pm

Should the threads on oil drain petcock have anything on them for a seal ? Such as pipe dope, thread tape etc.


big2bird
Posts: 205
Joined: Mon Sep 14, 2020 10:57 pm
First Name: Jeffrey
Last Name: Hausey
* REQUIRED* Type and Year of Model Ts owned: Early 23 Touring
Location: Anaheim, Ca.
MTFCA Number: 51193
Board Member Since: 2020

Re: Oil drain petcock

Post by big2bird » Thu Oct 15, 2020 2:02 pm

Yes. They are tapered pipe fittings.

User avatar

Rich Eagle
Posts: 6815
Joined: Fri Jan 04, 2019 10:51 am
First Name: Richard
Last Name: Eagle
* REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
Location: Idaho Falls, ID
MTFCA Number: 1219
Contact:

Re: Oil drain petcock

Post by Rich Eagle » Thu Oct 15, 2020 2:07 pm

I use Teflon tape with good results.
When did I do that?


Norman Kling
Posts: 4095
Joined: Tue Jan 08, 2019 1:39 pm
First Name: Norman
Last Name: Kling
Location: Alpine California

Re: Oil drain petcock

Post by Norman Kling » Thu Oct 15, 2020 4:29 pm

Are you referring to the petcock to check the oil level? I have not seen one for the drain, and would be concerned that you might get it caught on something and loose all your oil. The oil drain is a plug. Some cars have a pipe plug and others have a hex head with a copper ring between the plug and the crankcase. If you are using the oil level petcock to drain the oil, you will still have about 3 quarts of old oil in the crankcase.
Norm

User avatar

Quickm007
Posts: 1198
Joined: Mon Jan 07, 2019 10:58 am
First Name: Mario
Last Name: Brossard
* REQUIRED* Type and Year of Model Ts owned: 1911 Touring and 1914 speedster
Location: Quebec City Canada
MTFCA Number: 30981
MTFCI Number: 30981
Board Member Since: 1999

Re: Oil drain petcock

Post by Quickm007 » Thu Oct 15, 2020 4:34 pm

I use Teflon tape the one we used with gas. The packaging is yellow and the Teflon is thicker and much more resistant than regular Teflon.
Super Mario Bross ;)

1911 Touring
1914 Speedster

User avatar

Topic author
bill goodheart
Posts: 57
Joined: Sun Jan 06, 2019 9:37 pm
First Name: William
Last Name: Goodheart
* REQUIRED* Type and Year of Model Ts owned: 1919 Touring
Location: Edwards, ny
MTFCA Number: 30991

Re: Oil drain petcock

Post by bill goodheart » Thu Oct 15, 2020 5:49 pm

I am referring to the petcocks to check oil level, sorry calling them oil drain caused confusion. I appreciate all the responses, I think I will use the Teflon tape.


Allan
Posts: 5259
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Oil drain petcock

Post by Allan » Thu Oct 15, 2020 6:34 pm

The petcocks have a tapered thread and it is not necessary to use any sealant if they are tight, but doing so is good insurance. The tapered thread means they will tighten up OK, but they may be differently oriented. If you want to use a tool to check the levels, this may be a problem. Then the tape can come into its own by sealing up he threads on a petcock which is not absolutely tight but is left oriented as required.

Allan from down under.


Art Wilson
Posts: 33
Joined: Sun Jan 06, 2019 8:53 pm
First Name: Art
Last Name: Wilson
* REQUIRED* Type and Year of Model Ts owned: 1911 Touring
Location: San Diego

Re: Oil drain petcock

Post by Art Wilson » Thu Oct 15, 2020 8:52 pm

I had a petcock come loose and fall out when I used Teflon tape for sealing the threads, but only tightened it to the position I wanted instead of fully tightening it.
Luckily I caught it in time so no damage occurred.

Post Reply Previous topicNext topic