Where do these go?

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
User avatar

Topic author
Mopar_man
Posts: 379
Joined: Sat Jan 12, 2019 9:24 pm
First Name: Robert
Last Name: Govoni
Location: Fredericksburg, VA
MTFCA Number: 32331
Board Member Since: 2016

Where do these go?

Post by Mopar_man » Mon Jan 11, 2021 2:58 pm

Need some help with a screw set for a 26/7 touring. I bought a pack of interior trim screws at Carlisle a while back and I'm trying to figure out where they go. As far as I can tell the 7 circled in blue are for the dashboard to the cow. The ones circled in orange were ordered from Lang's and Are for the switch plate. I'm thinking that the ones in green are for the switch plate as well (they came in the kit) but they seem a bit bigger. The two circled in red I'm not sure. Any suggestions? Do the dash screws have to have cup washers just under the screw head?
IMG_E4087.jpeg
Here is the packaging.
IMG_4088.jpeg

User avatar

AndreFordT
Posts: 304
Joined: Sun Jan 06, 2019 12:25 pm
First Name: Andre
Last Name: Valkenaers
Location: Scherpenheuvel
MTFCA Number: 23792
MTFCI Number: 19330

Re: Where do these go?

Post by AndreFordT » Mon Jan 11, 2021 3:10 pm

This are the screws and nuts that fix the dash to the body.
7 are needed
Andre
Belgium
Attachments
DSCN7184.JPG

User avatar

Topic author
Mopar_man
Posts: 379
Joined: Sat Jan 12, 2019 9:24 pm
First Name: Robert
Last Name: Govoni
Location: Fredericksburg, VA
MTFCA Number: 32331
Board Member Since: 2016

Re: Where do these go?

Post by Mopar_man » Mon Jan 11, 2021 3:25 pm

Any Idea about the ones in Red?

User avatar

doodlebugt
Posts: 36
Joined: Sun Jan 06, 2019 3:46 pm
First Name: Bruce
Last Name: Csorba
Location: Melbourne, Australia

Re: Where do these go?

Post by doodlebugt » Mon Jan 11, 2021 3:33 pm

Column clamp.
Bruce
(Are they originally shorter?)
Bruce Csorba
Melbourne, Australia

15 4-spring Rajo racer
17 C-cab van
25 "Dalgety" Tourer

User avatar

Topic author
Mopar_man
Posts: 379
Joined: Sat Jan 12, 2019 9:24 pm
First Name: Robert
Last Name: Govoni
Location: Fredericksburg, VA
MTFCA Number: 32331
Board Member Since: 2016

Re: Where do these go?

Post by Mopar_man » Mon Jan 11, 2021 4:34 pm

Thanks that makes sense.

User avatar

DanTreace
Posts: 1781
Joined: Sun Jan 06, 2019 10:56 am
First Name: Dan
Last Name: Treace
Location: North Central FL
MTFCA Number: 4838
MTFCI Number: 115
Board Member Since: 2000
Contact:

Re: Where do these go?

Post by DanTreace » Mon Jan 11, 2021 5:25 pm

Green and Red ones for the column clamp.


100_3075 - Copy (2) (600x487) (598x485).jpg
100_3075 - Copy (2) (600x487) (598x485).jpg (113.58 KiB) Viewed 614 times
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford

User avatar

varmint
Posts: 219
Joined: Mon Jan 07, 2019 2:02 pm
First Name: Vernon
Last Name: Worley
Location: New Orleans, LA
MTFCA Number: 49462
Contact:

Re: Where do these go?

Post by varmint » Mon Jan 11, 2021 5:55 pm

I have yet to purchase some. Should they be oval or flat head?
Vern (Vieux Carre)

User avatar

George House
Posts: 902
Joined: Sun Jan 06, 2019 5:25 pm
First Name: George
Last Name: House
Location: Northern Caldwell County TX
MTFCA Number: 115
MTFCA Life Member: YES

Re: Where do these go?

Post by George House » Mon Jan 11, 2021 5:59 pm

Column clamp ?.. oval
May your character not be a writing in the sand but an inscription upon the rock.

User avatar

DanTreace
Posts: 1781
Joined: Sun Jan 06, 2019 10:56 am
First Name: Dan
Last Name: Treace
Location: North Central FL
MTFCA Number: 4838
MTFCI Number: 115
Board Member Since: 2000
Contact:

Re: Where do these go?

Post by DanTreace » Mon Jan 11, 2021 7:59 pm

All are single slot, oval head, nickel plated. Except Canada, those are Robersons. :)

Stainless look like nickel when polished and won't nickel tarnish
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford

User avatar

Topic author
Mopar_man
Posts: 379
Joined: Sat Jan 12, 2019 9:24 pm
First Name: Robert
Last Name: Govoni
Location: Fredericksburg, VA
MTFCA Number: 32331
Board Member Since: 2016

Re: Where do these go?

Post by Mopar_man » Mon Jan 11, 2021 11:15 pm

Thanks everyone. This helps. now I see where they all go.

Post Reply Previous topicNext topic