Motometer Glo-Light what size would it fit
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 59
- Joined: Fri Jan 18, 2019 11:29 pm
- First Name: Bill
- Last Name: Webb
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster, 1927 Roadster
- Location: Nc
Motometer Glo-Light what size would it fit
I recently acquired a motometer glo-light and am curious on what size motometer would this accessory fit. I would like to purchase a motometer and add to my T roadster build.
I measured between bolt holes and got an measurement of 2.55 between center holes. Measuring at a criss cross pattern. The overall outside diameter of the glo-meter is roughly around 2.88.
I measured between bolt holes and got an measurement of 2.55 between center holes. Measuring at a criss cross pattern. The overall outside diameter of the glo-meter is roughly around 2.88.
-
- Posts: 584
- Joined: Tue Jan 08, 2019 12:25 pm
- First Name: Jim
- Last Name: Davis
- * REQUIRED* Type and Year of Model Ts owned: 1926 Touring. 1923/26 Open Express. 1920 depot hack
- Location: Tomball,Texas
- MTFCA Number: 49832
- MTFCI Number: 24686
- Board Member Since: 2017
PICTURES OF MOTOMETER LIGHT
FYI. One for sale on e-bay. with plenty of good pictures. I can not figure out how to post.
NOS BOYCE MOTO METER LIGHT IN ORIGINAL BOX, WORKING, MOTO-LITE, HOOD ORNAMENT
$210.00
Item number 133626696101
NOS BOYCE MOTO METER LIGHT IN ORIGINAL BOX, WORKING, MOTO-LITE, HOOD ORNAMENT
$210.00
Item number 133626696101
-
- Posts: 6815
- Joined: Fri Jan 04, 2019 10:51 am
- First Name: Richard
- Last Name: Eagle
- * REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
- Location: Idaho Falls, ID
- MTFCA Number: 1219
- Contact:
Re: Motometer Glo-Light what size would it fit
The two sizes I know of are the Junior and Senior. They are approx. 2 1/4" and 3" diameters. I would say your cover is for the Senior size.
Rich
Rich
When did I do that?
-
- Posts: 1463
- Joined: Sun Jan 06, 2019 8:35 pm
- First Name: Darel
- Last Name: Leipold
- * REQUIRED* Type and Year of Model Ts owned: 1910 touring
- Location: Excelsior MN
- MTFCA Number: 823
- MTFCI Number: 953
- Board Member Since: 1999
Re: Motometer Glo-Light what size would it fit
Here is one mounted on a junior meter. The light unit is from the 1920s. The junior meter if from the 1950s and is a working meter. It is for sale for $108 post paid. I will list it in the for sale column if no one buys it from here.
-
- Posts: 3384
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Morsher
- * REQUIRED* Type and Year of Model Ts owned: 1925TT, 1926 Martin-Parry bodied wagon, 1927 mercury bodied speedster
- Location: Norwalk Ohio
Re: Motometer Glo-Light what size would it fit
I’ll take it , Darel. Email sent.
-
- Posts: 1463
- Joined: Sun Jan 06, 2019 8:35 pm
- First Name: Darel
- Last Name: Leipold
- * REQUIRED* Type and Year of Model Ts owned: 1910 touring
- Location: Excelsior MN
- MTFCA Number: 823
- MTFCI Number: 953
- Board Member Since: 1999
Re: Motometer Glo-Light what size would it fit
sold, Thank you
-
Topic author - Posts: 59
- Joined: Fri Jan 18, 2019 11:29 pm
- First Name: Bill
- Last Name: Webb
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster, 1927 Roadster
- Location: Nc
Re: Motometer Glo-Light what size would it fit
Dang good deal. Wish I would have seen that one for sale before now.
Darel could you measure the bolt hole width and outside diameter.
Below is a link showing an original catalog for the motometers and it states the junior is 3 inch diameter?
https://forums.aaca.org/topic/334885-motometer/
Darel could you measure the bolt hole width and outside diameter.
Below is a link showing an original catalog for the motometers and it states the junior is 3 inch diameter?
https://forums.aaca.org/topic/334885-motometer/
-
- Posts: 6815
- Joined: Fri Jan 04, 2019 10:51 am
- First Name: Richard
- Last Name: Eagle
- * REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
- Location: Idaho Falls, ID
- MTFCA Number: 1219
- Contact:
Re: Motometer Glo-Light what size would it fit
That's good to know Bill. Some collectors are calling the Midget motometers Juniors now. It pays to be carefull.
Rich
Rich
When did I do that?
-
- Posts: 3384
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Morsher
- * REQUIRED* Type and Year of Model Ts owned: 1925TT, 1926 Martin-Parry bodied wagon, 1927 mercury bodied speedster
- Location: Norwalk Ohio
Re: Motometer Glo-Light what size would it fit
This may help. The middle one is marked “junior”