What have you done with your Model T in March?

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Scott C.
Posts: 805
Joined: Sun Jan 06, 2019 11:44 am
First Name: Scott
Last Name: Clements
Location: Waynetown Indiana
MTFCA Number: 49592

What have you done with your Model T in March?

Post by Scott C. » Fri Mar 05, 2021 1:18 am

After deciding that it needs more than just a valve job, I pulled the engine out of the Coupe. It's time for a complete overhaul!
IMG_1453 (2).jpg

User avatar

AndreFordT
Posts: 487
Joined: Sun Jan 06, 2019 12:25 pm
First Name: Andre
Last Name: Valkenaers
* REQUIRED* Type and Year of Model Ts owned: 1926 ; 1922 ; 1915.
Location: Scherpenheuvel
MTFCA Number: 23792
MTFCI Number: 19330

Re: What have you done with your Model T in March?

Post by AndreFordT » Fri Mar 05, 2021 6:26 am

Good luck
Andre
Belgium

User avatar

kelly mt
Posts: 249
Joined: Sun Jan 06, 2019 2:55 pm
First Name: Pat
Last Name: Kelly
* REQUIRED* Type and Year of Model Ts owned: 23 Speedster, 25 TT, 26 Roadster, 27 Tudor
Location: Noxon MT

Re: What have you done with your Model T in March?

Post by kelly mt » Sat Mar 06, 2021 2:07 am

Pins and bushings for the front axle and seals and de-gunk for the rear axle. Also adjust center main.
20210301_124952.jpg
20210222_143005.jpg


Dallas Landers
Posts: 2786
Joined: Sun Jan 06, 2019 12:26 pm
First Name: Dallas
Last Name: Landers
* REQUIRED* Type and Year of Model Ts owned: 26 Rpu, 23 TT, 24 coupe,
Location: N.E. Indiana
MTFCA Number: 49995

Re: What have you done with your Model T in March?

Post by Dallas Landers » Sat Mar 06, 2021 6:14 am

Nice looking TT Pat.

User avatar

Hudson29
Posts: 391
Joined: Fri Mar 01, 2019 1:51 pm
First Name: Paul
Last Name: O'Neil
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1923 Runabout
Location: Klamath Falls, OR
MTFCI Number: 18018
Board Member Since: 2005

Re: What have you done with your Model T in March?

Post by Hudson29 » Sat Mar 06, 2021 2:49 pm

Scott - I see some aircraft style jacks in the back of your picture. Do you work on aircraft too?
The man with a watch always knows what time it is, the man with two watches is never sure.

User avatar

Hudson29
Posts: 391
Joined: Fri Mar 01, 2019 1:51 pm
First Name: Paul
Last Name: O'Neil
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1923 Runabout
Location: Klamath Falls, OR
MTFCI Number: 18018
Board Member Since: 2005

Re: What have you done with your Model T in March?

Post by Hudson29 » Sat Mar 06, 2021 3:16 pm

I replaced a headlight switch. I'm no electrical type at all so I consider this a minor victory. My '14 project car had been converted from gas to electric lights. One worked OK, the other was dim sometimes & out other times. As part of my attempts to generally improve the electrics I had removed the coil boxed and cleaned all the contacts inside & out with a wire hand brush & some contact cleaner. The switch was sealed so some of the cleaner was sprayed onto the shaft and worked back & forth.

I didn't see any changes electrically with anything. The motor started and ran about the same. Only when I tried the lights was there a change. Now neither headlight would work at all. I got out the meter and looked to see where there was 6v but could not understand the readings. The switch, the meter or my brain were out of order someplace.

I ordered a magneto headlight switch which I wanted anyway as its a Ford T part only one year more modern that the car. The new switch, of course, would not fit. The barrel was too big to fit in the hole left by the old switch. Time for the Dremel with a sanding drum which quickly made the hole large enough to winkle in the new switch.

There were two holes in the firewall just perfect for the mountings screws No. 5 x 1/2 from Gatelatch. I wonder if this firewall might have had an original magneto headlight switch on it at some time? If so, why was the hole too small?

The wires were reinstalled and the headlights worked just as they had before I "improved" them. A bit of wiggling of the wires at the headlight end revealed that the problem is in the connector someplace. Next session we'll see if the contact can't be improved there.

Monogram_05.jpg
Monogram_06.jpg
Headlight Switch_01.jpg
Headlight Switch_02.jpg
Monogram_09.jpg
Last edited by Hudson29 on Sat Mar 06, 2021 3:23 pm, edited 2 times in total.
The man with a watch always knows what time it is, the man with two watches is never sure.

User avatar

Hudson29
Posts: 391
Joined: Fri Mar 01, 2019 1:51 pm
First Name: Paul
Last Name: O'Neil
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1923 Runabout
Location: Klamath Falls, OR
MTFCI Number: 18018
Board Member Since: 2005

Re: What have you done with your Model T in March?

Post by Hudson29 » Sat Mar 06, 2021 3:19 pm

The new switch is in now and looks pretty good. The only thing that bothers me is the handle. It looks to be chrome plated. Should it be brass or nickel plated?
Monogram_07.jpg
Monogram_08.jpg
The man with a watch always knows what time it is, the man with two watches is never sure.


Allan
Posts: 5201
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: What have you done with your Model T in March?

Post by Allan » Sun Mar 07, 2021 12:48 am

The first switch shown is a replacement. It only needs the hole large enough for the thread to go through. The ody of the switch then sits in the engine compartment. Your replacement is correct. The hole has to accommodate the switch body.

If you find a piece you know is chromed, hold it up to your new switch pull to compare the two. I think you will find your switch is newly plated nickel.
Chrome has a blue cast, nickel is yellow, a bit like LED lights compared with incandescents.

Allan from down under.


Powerwagonmaniac1
Posts: 77
Joined: Sat Jan 12, 2019 11:48 pm
First Name: Chris
Last Name: Becker
* REQUIRED* Type and Year of Model Ts owned: 1919 touring, 1917 speedster, 1925 give or take roadster pickup
Location: Portland oregon
Board Member Since: 2005

Re: What have you done with your Model T in March?

Post by Powerwagonmaniac1 » Sun Mar 07, 2021 12:43 pm

Tin Tillie’s new heart
Tin Tillie’s new heart
D3E69F0B-D988-4B2D-A46F-ADA8C38D6C9F.jpeg
D3E69F0B-D988-4B2D-A46F-ADA8C38D6C9F.jpeg
Clayton and I sent the winter rebuilding an engine and Warford overdive for Tin Tillie our families 1919 touring.

New features include: z head, .325 lift camshaft. .020 over aluminum pistons, modern valves, high flow intake manifold, straight they NH carb, rebuilt transmission and bonded linings, new 4th main, rebuilt the cast iron cased Warford that’s been in her for 40+ years.

Been two years since the old motor died so very much looking forward to
36CA5F6A-612A-4C4E-A193-44ABCEF4951F.jpeg
F77E8229-39F9-4CEB-9A7D-5A657FD8432D.jpeg
driving her again.

User avatar

Rich Eagle
Posts: 6789
Joined: Fri Jan 04, 2019 10:51 am
First Name: Richard
Last Name: Eagle
* REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
Location: Idaho Falls, ID
MTFCA Number: 1219
Contact:

Re: What have you done with your Model T in March?

Post by Rich Eagle » Sun Mar 07, 2021 4:12 pm

We quit driving the Coupe a couple weeks ago. The generator wasn't charging and it also was overheating. Sub-freezing temperatures kept me from working on it. Today it was 46°.
GenWork.jpg
I was a bit hasty pulling the generator out. Connecting a wire to the generator post it motored. The cutout cap had popped off during removal and I could now see that the diode wire was no longer soldered. While the generator was out I could see the armature needed a little cleaning. Also the gear pin was loose so I mashed it a bit.
It was obvious that the heating problem was that the fan belt had run off the end of the pulley.
I re-soldered the diode wire and installed the generator. It seems to get a little heavier each year for some reason.
After starting the engine there was no response at the amp meter. Bypassing the cutout gave a good charge. I see some odd texture where the wire goes into the diode and wonder if heat may have made it fail.
I will order a new cutout and also a diode to play with later. Fortunately my '35 V8 had a good cutout on it for the mean time.
It was really a treat to be outside working on cars again. The sun felt good.
Rich
When did I do that?


Allan
Posts: 5201
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: What have you done with your Model T in March?

Post by Allan » Sun Mar 07, 2021 10:55 pm

Rich, if the belt runs off to the front, it usually means the fan shaft is pointing down hill a bit. If you take the fan off, hold just the arm in a vice at about the angle it sits in the car, a big crescent wrench can be used to bend the end up a tad. Refit and test run to check the results.

Hope this helps.
Allan from down under.


Allan
Posts: 5201
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: What have you done with your Model T in March?

Post by Allan » Sun Mar 07, 2021 11:00 pm

I helped a mate get his starter motor back into operation. It had gotten slower and slower over time, until it just stopped. The armature was seized in the potmetal bush on the brushplate end. A new bronze bush, some correction to a slightly bent shaft, a cleanup and undercutting of the armature and some new brushes had him as happy as Larry.

Allan from down under.

User avatar

CudaMan
Posts: 2383
Joined: Fri Jan 04, 2019 4:17 pm
First Name: Mark
Last Name: Strange
* REQUIRED* Type and Year of Model Ts owned: 1924 Cut Off Touring (now a pickup)
Location: Hillsboro, MO
MTFCA Number: 30944
MTFCI Number: 23667
Board Member Since: 2013

Re: What have you done with your Model T in March?

Post by CudaMan » Mon Mar 08, 2021 10:45 am

I removed my winter front and hood blanket and put them away until next winter. In a month or so, I'll remove the carb hot air pipe and replace it with my summer air filter setup. :)
Mark Strange
Hillsboro, MO
1924 Cut-off Touring (now a pickup)

User avatar

John Warren
Posts: 1069
Joined: Sun Jan 06, 2019 12:18 pm
First Name: John
Last Name: Warren
* REQUIRED* Type and Year of Model Ts owned: 14 Roadster, 25 Pickup , 26 Canadian Touring , and a 24-28 TA race car
Location: Henderson, Nevada

Re: What have you done with your Model T in March?

Post by John Warren » Mon Mar 08, 2021 6:31 pm

20210302_151256.jpg
Been doing some repair on the 26 coupe.
Attachments
20210305_122910.jpg
20210302_151251.jpg
20210308_131442.jpg
24-28 TA race car, 26 Canadian touring, 25 Roadster pickup, 14 Roadster, and 11AB Maxwell runabout
Keep it simple and keep a good junk pile if you want to invent something :P

User avatar

Rich Eagle
Posts: 6789
Joined: Fri Jan 04, 2019 10:51 am
First Name: Richard
Last Name: Eagle
* REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
Location: Idaho Falls, ID
MTFCA Number: 1219
Contact:

Re: What have you done with your Model T in March?

Post by Rich Eagle » Mon Mar 08, 2021 7:09 pm

That's time well spent. Looks like you have the work where it is easy to get at.
Rich
When did I do that?

User avatar

John Warren
Posts: 1069
Joined: Sun Jan 06, 2019 12:18 pm
First Name: John
Last Name: Warren
* REQUIRED* Type and Year of Model Ts owned: 14 Roadster, 25 Pickup , 26 Canadian Touring , and a 24-28 TA race car
Location: Henderson, Nevada

Re: What have you done with your Model T in March?

Post by John Warren » Mon Mar 08, 2021 7:12 pm

It is a very handy position for these repairs, thanks. jw
24-28 TA race car, 26 Canadian touring, 25 Roadster pickup, 14 Roadster, and 11AB Maxwell runabout
Keep it simple and keep a good junk pile if you want to invent something :P


Dallas Landers
Posts: 2786
Joined: Sun Jan 06, 2019 12:26 pm
First Name: Dallas
Last Name: Landers
* REQUIRED* Type and Year of Model Ts owned: 26 Rpu, 23 TT, 24 coupe,
Location: N.E. Indiana
MTFCA Number: 49995

Re: What have you done with your Model T in March?

Post by Dallas Landers » Mon Mar 08, 2021 10:09 pm

After 4 fires in 2 hours this afternoon, I came home and done the chores in time to take the RPU to the fire station for our meeting. Pretty late when I got home.[attachment=0]20210308_213500.jpg[/attachment]
Attachments
20210308_213500.jpg

User avatar

Ruxstel24
Posts: 2345
Joined: Sun Jan 06, 2019 11:25 am
First Name: Dave
Last Name: Hanlon
* REQUIRED* Type and Year of Model Ts owned: 24 Touring car
Location: NE Ohio
MTFCA Number: 50191
Board Member Since: 2018

Re: What have you done with your Model T in March?

Post by Ruxstel24 » Tue Mar 09, 2021 5:57 pm

Got mine started the other day and brought it home. Topped off the charge in the battery...
Today it hit 65 degrees and I got some fresh gas and went to the PO and mailed a couple packages.
Ran very good !! :D

User avatar

TonyB
Posts: 663
Joined: Fri Jan 04, 2019 11:15 am
First Name: Tony
Last Name: Bowker
* REQUIRED* Type and Year of Model Ts owned: 1914 touring
Location: La Mesa, CA
MTFCA Number: 32
MTFCA Life Member: YES
Board Member Since: 2005

Re: What have you done with your Model T in March?

Post by TonyB » Wed Mar 10, 2021 11:03 am

I got tired of fighting the road gear on my original speedometer for the 24 Coupe. So I bought a new setup from John Stoltz at T Ranch. It arrived within a couple of days and I slightly modified the original mounting on the dashboard of the Coupe. It looks great and works perfectly😊😊
Speedo in coupe
Speedo in coupe
Tony Bowker
La Mesa, California
1914 Touring, 1915 Speedster, 1924 Coupe.


Mark Osterman
Posts: 1011
Joined: Mon Jan 07, 2019 10:18 pm
First Name: Mark
Last Name: Osterman
* REQUIRED* Type and Year of Model Ts owned: 1923 runabout
Location: Rochester, NY
Contact:

Re: What have you done with your Model T in March?

Post by Mark Osterman » Wed Mar 10, 2021 11:05 am

Just enjoying driving now that the salt is off the roads. I’ve run the car in my my driveway or on new snow (no salt) once a week throughout the winter and kept the plugs, points and timer clean. I also keep the battery on a trickle charger so it’s always ready for those early days of Spring like today. I’m really at a pause for working on my car since mechanically it’s very good and I don’t plan on doing any more to the body. Now that I’m retired (as of December .. much thanks to covid) I am thinking I might rebuild two wheels at a time over the next year and maybe make some side curtains. Otherwise I plan to continue driving it around 100 miles a week.
Attachments
8DEBC7DC-741A-4265-A3E3-07881ED61DBD.jpeg


NU2theT
Posts: 209
Joined: Fri Feb 07, 2020 2:26 pm
First Name: Scott
Last Name: Wendt
* REQUIRED* Type and Year of Model Ts owned: 1926 Fordor
Location: Portland Maine
MTFCA Number: 32419

Re: What have you done with your Model T in March?

Post by NU2theT » Wed Mar 10, 2021 7:28 pm

While waiting for my pedals to return from paint, I had some time to get the full flow float valve installed.

Float set and the carb back on the manifold.
Attachments
IMG_0358.JPG


Gene_French
Posts: 829
Joined: Tue Jan 08, 2019 9:58 am
First Name: Gene
Last Name: French
* REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pkup.
Location: Nunn, CO
MTFCA Number: 15614
Board Member Since: 2014

Re: What have you done with your Model T in March?

Post by Gene_French » Wed Mar 10, 2021 8:06 pm

Not much work on the 26 roadster pkup. ... way too cold and windy ... have been getting ready for Chickasha ... did re-babbitt the mains and linebore a 1917 display block ... kinda interesting unit in that it had a "G" prefix to a 3 digit number ... probably a Gleaner combine power unit ... anyway , am busy getting stuff ready to sell ( i hope) ...always an optimist ...Gene French

User avatar

Ruxstel24
Posts: 2345
Joined: Sun Jan 06, 2019 11:25 am
First Name: Dave
Last Name: Hanlon
* REQUIRED* Type and Year of Model Ts owned: 24 Touring car
Location: NE Ohio
MTFCA Number: 50191
Board Member Since: 2018

Re: What have you done with your Model T in March?

Post by Ruxstel24 » Wed Mar 17, 2021 3:44 pm

Checked the oil and tire pressure, went for a little ride, about 10 miles.
A beautiful sunny 65 degrees and little wind. :D
Rain and cold till the weekend, so today was the day !
Attachments
2035CB17-F748-4C79-86C3-F34551317C32.jpeg
77D56F05-85AA-462C-AD1B-46B6B62D84C2.jpeg
99980BEF-1704-472C-A2F2-9C3835D8EC04.jpeg


Sarikatime
Posts: 622
Joined: Sun Jan 06, 2019 12:47 pm
First Name: Frank
Last Name: Seress
* REQUIRED* Type and Year of Model Ts owned: 1912 Towncar, 1915 Touring
Location: Prescott, Arizona
MTFCA Number: 27707

Re: What have you done with your Model T in March?

Post by Sarikatime » Thu Mar 18, 2021 11:43 am

Dave, does the wind wing help so the air doesn’t come to the back of your head as you drive, the wind coming back around to the back of my head drives me crazy. I see that you have the roll up back curtain, does that help as well. I ordered a new top but no back curtain, is that a mistake. Can still change the order. Frank

User avatar

Ruxstel24
Posts: 2345
Joined: Sun Jan 06, 2019 11:25 am
First Name: Dave
Last Name: Hanlon
* REQUIRED* Type and Year of Model Ts owned: 24 Touring car
Location: NE Ohio
MTFCA Number: 50191
Board Member Since: 2018

Re: What have you done with your Model T in March?

Post by Ruxstel24 » Thu Mar 18, 2021 12:53 pm

Frank, the wings help some, but the roll up curtain REALLY helps.
Not correct for my 24, but Pop added it later after he made the top.
(yes he made tops from scratch, no kit...wish I was better at it) :(
The window really cuts down drag and inherent Model T noises also. (Kinda like turning up the radio :lol: )
And of course adds much more visibility.


ryanf1023
Posts: 96
Joined: Sun Jan 06, 2019 2:24 pm
First Name: Ryan
Last Name: Fenrich
* REQUIRED* Type and Year of Model Ts owned: Speedster Project
Location: Edmonton

Re: What have you done with your Model T in March?

Post by ryanf1023 » Thu Mar 18, 2021 9:12 pm

Finally got back to my coil box after months of it sitting. My soldering is getting better with time and practice. I also put fish paper underneath the wires to prevent any shorts to the box itself.

The battery connection is bothering me. The tight wire connection has the switch rubbing against it. I figure it’s a matter of when, not if it rubs right through the cloth and insulation. Perhaps this one is better soldered. And if that’s the case, might as well do the same to the magneto connection. I can’t really foresee any reason not to, as long as care is taken to keep it contained and away from any insulators.

Next step is weathering the top of the box to match the base of it.
E4BF0B6E-8987-4B8D-B7E6-8E25A170B4D6.jpeg
2E675CA3-953E-426C-A61B-C4C2E77D9DFB.jpeg
49EFDB77-9C6F-4CC5-A729-680634BBFB7D.jpeg
F5B0AF30-327A-474B-ACB8-8D02757D5C70.jpeg


Topic author
Scott C.
Posts: 805
Joined: Sun Jan 06, 2019 11:44 am
First Name: Scott
Last Name: Clements
Location: Waynetown Indiana
MTFCA Number: 49592

Re: What have you done with your Model T in March?

Post by Scott C. » Sat Mar 27, 2021 1:30 am

I finally got the engine out of the 26 coupe taken apart. Only to discover that the block is cracked in 3 places!!
IMG_1491 (2).jpg
IMG_1489 (2).jpg
IMG_1487 (2).jpg

User avatar

AndreFordT
Posts: 487
Joined: Sun Jan 06, 2019 12:25 pm
First Name: Andre
Last Name: Valkenaers
* REQUIRED* Type and Year of Model Ts owned: 1926 ; 1922 ; 1915.
Location: Scherpenheuvel
MTFCA Number: 23792
MTFCI Number: 19330

Re: What have you done with your Model T in March?

Post by AndreFordT » Sat Mar 27, 2021 4:06 am

You will need a Lock-N-Stitch and than sleeve the engine.
Seen this before after setting steel valev seets.

Good luck
Andre
Belgium


Allan
Posts: 5201
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: What have you done with your Model T in March?

Post by Allan » Sat Mar 27, 2021 6:31 am

Today I finally got around to fitting the H1 Holley carburetor Uncle Stan rebuilt for me some years ago. The occasional leak of fuel when I turned off the van became more frequent, and I was getting T'd off getting under the car to turn off the tap. I'd bought another tap to fit next to the carby to save having to go down whenever I stopped for long, but if the new one didn't leak, that would not be a problem.
The installation went well, but I had to fit a fibre washer under the fuel bowl nut to cure a leak there. While at it, I replaced Stan's nice new screws with the brass originals from my old carby. The linkage needed shortening to get a lower idle and that just meant a little more bend around the back of the manifold. No leaks as yet, and it is much easier to start. The choke and throttle plate shafts on the old one were well worn, and that problematic original needle and seat is also worn.
I'll still turn it off under the car when I put her away when I get home, but I am looking forward to trouble free motoring for a while now.

Allan from down under.


NealW
Posts: 384
Joined: Sun Jan 13, 2019 6:20 pm
First Name: Neal
Last Name: Willford
* REQUIRED* Type and Year of Model Ts owned: 1911 Touring, 1915 Runabout
Location: Kansas
MTFCA Number: 50256
Contact:

Re: What have you done with your Model T in March?

Post by NealW » Sat Mar 27, 2021 4:32 pm

Got both T's off their winter jacks, aired the tires up and lubricated them. The 15 runabout was due for an oil change, so it got that too. It is always nice to take the transmission cover off and see nothing but some fine metal shavings on the magnet! Like opening up a mystery Christmas present, only hoping in this case there is no surprise in the box...

The weather was too nice not to take a drive, so my wife and I took a quick spin after putting in some fresh gas. After a very cold winter for Kansas, it was nice to get out on the road again with the top down.

User avatar

Mark Gregush
Posts: 4956
Joined: Sat Jan 05, 2019 1:57 pm
First Name: Mark
Last Name: Gregush
* REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
Location: Portland Or
MTFCA Number: 52564
Board Member Since: 1999

Re: What have you done with your Model T in March?

Post by Mark Gregush » Sat Mar 27, 2021 4:53 pm

Made axle holder for engine stand, back in February. Just got batteries so took pictures today.
DSCN0856.JPG
DSCN0855.JPG
Put some paint on headlights for 1925, but are too glossy for rest of car!
DSCN0857.JPG
Yes I know the one is sideways, it was the only way it would load without major redo. ;)
I know the voices aren't real but damn they have some good ideas! :shock:

1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup


Burger in Spokane
Posts: 2251
Joined: Sat Mar 09, 2019 2:05 am
First Name: Brent
Last Name: Burger
* REQUIRED* Type and Year of Model Ts owned: 1926 TT closed cab flatbed
Location: Spokane, Wa.
Board Member Since: 2014

Re: What have you done with your Model T in March?

Post by Burger in Spokane » Sun Mar 28, 2021 2:03 am

So far for March, I have found appropriate looking tension springs for the OF
choke, but have yet to install them. Acquired the tune-in instructions for the
OF too, and will do that once the springs are in. The woodstove has emptied
the bed of firewood, so it will be clear and ready for work when the weather
is more consistently nice. Put together several matching sets of amethyst
headlight lenses over the winter. Something I have wanted to have in reserve,
just in case one broke in service. Still need to complete the turn signal system.

DSC05284.JPG
More people are doing it today than ever before !


Rich Bingham
Posts: 1922
Joined: Sun Jan 06, 2019 11:23 am
First Name: Rich
Last Name: Bingham
* REQUIRED* Type and Year of Model Ts owned: 1913 runabout
Location: Blackfoot, Idaho

Re: What have you done with your Model T in March?

Post by Rich Bingham » Sun Mar 28, 2021 7:33 pm

Barn find '13 ! I went out to the barn and found Lizzie right where I left her late last fall. I'm not planning a complete restoration, just clean up last summer's mud, and polish the brass to get ready for this season's mud. She needs a new top, that's on order. New brush in the TW timer, she fired right up in two pulls on the crank, on "mag" ! Wahoo !!
Attachments
513C05E8-B371-4288-84C1-7A498ACE96B9.jpeg
513C05E8-B371-4288-84C1-7A498ACE96B9.jpeg (36.99 KiB) Viewed 2967 times
"Get a horse !"

User avatar

kelly mt
Posts: 249
Joined: Sun Jan 06, 2019 2:55 pm
First Name: Pat
Last Name: Kelly
* REQUIRED* Type and Year of Model Ts owned: 23 Speedster, 25 TT, 26 Roadster, 27 Tudor
Location: Noxon MT

Re: What have you done with your Model T in March?

Post by kelly mt » Mon Mar 29, 2021 10:55 pm

My pinion gear broke into three pieces. Had to put a standard gear in that I had until I can find a 10 tooth. The old lift made this a pretty easy job. Going to add safety hubs while I'm at it.
20210325_175926.jpg
20210325_175906.jpg

Post Reply Previous topicNext topic