Engine rebuild needed.

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
User avatar

Topic author
Jeff5015
Posts: 163
Joined: Sat Jan 12, 2019 3:20 pm
First Name: Jeff
Last Name: Schroeder
* REQUIRED* Type and Year of Model Ts owned: 1916 Touring
Location: Pensacola FL
MTFCA Number: 50300
MTFCI Number: 87
Board Member Since: 2019

Engine rebuild needed.

Post by Jeff5015 » Mon Mar 11, 2019 5:00 pm

I am in NW Florida, in Pensacola, looking for a quality shop to rebuild my '24 engine. It needs a valve job and I thought I'd get the hardened valve inserts. Why not go for a whole rebuild at this point?

I really need forum input on where to take my business.

Any suggestions?

Thanks in advance,

Jeff Schroeder
1916 Touring


fliverfan
Posts: 70
Joined: Mon Jan 07, 2019 2:53 pm
First Name: Bill
Last Name: Chuplis
Location: Coatesville, PA
Contact:

Re: Engine rebuild needed.

Post by fliverfan » Mon Mar 11, 2019 5:46 pm

Defining "whole rebuild" will go a long way in helping yourself find a shop.
There's a machinist near me in Coatesville, that people ship their T engines (and all kinds of pre-war I and II engines) from all over the country, to have him rebuild but I never saw him do a T transmission or a magneto.

User avatar

Topic author
Jeff5015
Posts: 163
Joined: Sat Jan 12, 2019 3:20 pm
First Name: Jeff
Last Name: Schroeder
* REQUIRED* Type and Year of Model Ts owned: 1916 Touring
Location: Pensacola FL
MTFCA Number: 50300
MTFCI Number: 87
Board Member Since: 2019

Re: Engine rebuild needed.

Post by Jeff5015 » Mon Mar 11, 2019 6:49 pm

I think I would go with the whole shebang, resurfacing the block, new pistons and rings, rebabbitted main bearings, valve seats, valves, rebuild transmission.
1916 Touring


Autie
Posts: 51
Joined: Mon Jan 07, 2019 12:27 am
First Name: Keith
Last Name: Keller
* REQUIRED* Type and Year of Model Ts owned: 1
Location: Fowlerville, MI

Re: Engine rebuild needed.

Post by Autie » Mon Mar 11, 2019 8:25 pm

Ship it to Joe Bell, located in Tiffin Ohio. Joe is, simply put..."The Best". Many others on this forum will say the same. I would have no one else touch my engine but Mr. Bell.

User avatar

FreighTer Jim
Posts: 1724
Joined: Sun Jan 06, 2019 10:50 am
First Name: James
Last Name: Jarzabek
Location: Dayton, OH
MTFCA Number: 29562
MTFCI Number: 24398
Board Member Since: 2008
Contact:

Several Options

Post by FreighTer Jim » Mon Mar 11, 2019 8:45 pm

You have several options - here are a couple ... :idea:

Denver, Colorado - Ron @ 720-220-4744

College Station, Texas - Ross @ 979-218-4083


FJ
Google “ Model T Transport “
MTFCA - MTFCI - MAFCA Member


schwabd1
Posts: 182
Joined: Sun Jan 06, 2019 7:26 pm
First Name: David
Last Name: Schwab
Location: Northwest Ohio

Re: Engine rebuild needed.

Post by schwabd1 » Mon Mar 11, 2019 9:55 pm

Another vote for Joe Bell..... Here's what you do. Get in touch with Tim Morsher as he has a panel truck he's getting brought up from Ft Meyers to pretty close to Joe in Ohio in the next couple weeks. You would probably have to meet someone close to I-75 on their way north (or what ever way they're taking the truck). If you're not in a big hurry for the engine you can plan a trip to Hershey and pick up the engine from Joe there.


Dropacent
Posts: 3384
Joined: Sun Jan 06, 2019 11:39 am
First Name: Tim
Last Name: Morsher
* REQUIRED* Type and Year of Model Ts owned: 1925TT, 1926 Martin-Parry bodied wagon, 1927 mercury bodied speedster
Location: Norwalk Ohio

Re: Engine rebuild needed.

Post by Dropacent » Mon Mar 11, 2019 10:31 pm

I can get it to Joe, but you need to be quick about it. Tmorsher@icloud.com


Mindless Automaton
Posts: 125
Joined: Mon Jan 07, 2019 1:47 am
First Name: Kep
Last Name: Kerensky
* REQUIRED* Type and Year of Model Ts owned: 23 truck, 26 bug
Location: Northland
Board Member Since: 2011
Contact:

Re: Engine rebuild needed.

Post by Mindless Automaton » Mon Mar 11, 2019 10:41 pm

Where you said "Why not go for a whole rebuild at this point? " I can think of a reason not to. If your existing engine is fine you might get it back with almost no improvement, or find it is tight and doesn't hand crank any more.
If your engine is tired then you might find a rebuild is an improvement.


Scott_Conger
Posts: 6428
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Engine rebuild needed.

Post by Scott_Conger » Mon Mar 11, 2019 11:01 pm

In my estimation, at least 1/2 of all T engine rebuilds did not need to be done. The Model T is an incredibly forgiving machine which responds well to maintenance and repair. Unless you have a cracked or sunken exhaust seat, you absolutely do NOT need hardened seats. In fact, if you need a valve job, it can be started on a Satureday morning and finished by Sunday night using a NeWay cutter and new valves (quicker if it is not your first time). Hardened seats are sold to people as a "fix" for unleaded gas...but guess what? There was no lead in the gas when the car was originally built! Hardened seats will restore a block with a cracked exhaust valve port if not too far gone, or restore height of a sunken seat, and that's about all they're good for in a T, but will lead to hotter running valves as the thermal efficiency of the pressed in seat is not as good as a solid block. Additionally, have you heard what an engine sounds like at 30MPH when one of those seats comes out of the block? It is not a pleasant sound, and don't for a minute think it doesn't happen.

Bottom line, if the engine is running without knocking due to bad bearings (which can often be taken up, without a rebuild), and there is a documented loss of compression isolated to one or more poorly seating valves, then do the valve job and go enjoy your car.

And if you're committed to "the whole shebang", then plan on $5500+, or for another fifteen hundred, you could buy a second running car.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured

Post Reply Previous topicNext topic