Info on regound cam????

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Dan Hatch
Posts: 4110
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Info on regound cam????

Post by Dan Hatch » Wed Jun 16, 2021 10:50 am

Does anyone know anything about a Jim Wade regrind cam? I have one my stuff in a box marked “ Jim Wade regrind .255 lift”.
Nothing on cam it self. Just has that on box. An info would be helpful.
Was someone named Jim Wade grinding cams years ago? Thanks Dan
I know what the .255 lift means, just want to know if cam is any good grind wise.


Topic author
Dan Hatch
Posts: 4110
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: Info on regound cam????

Post by Dan Hatch » Wed Jun 16, 2021 7:11 pm

Back to the top


Adam
Posts: 1411
Joined: Sun Jan 06, 2019 11:57 am
First Name: Adam
Last Name: Doleshal
* REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
Location: Wisconsin
MTFCA Number: 23809
MTFCI Number: 1
Board Member Since: 2000

Re: Info on regound cam????

Post by Adam » Wed Jun 16, 2021 9:46 pm

Post a picture. If the heel is ground back into the minor shaft diameter it is likely a poor quality regrind.

Post Reply Previous topicNext topic