Does anyone know anything about a Jim Wade regrind cam? I have one my stuff in a box marked “ Jim Wade regrind .255 lift”.
Nothing on cam it self. Just has that on box. An info would be helpful.
Was someone named Jim Wade grinding cams years ago? Thanks Dan
I know what the .255 lift means, just want to know if cam is any good grind wise.
Info on regound cam????
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 4143
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Info on regound cam????
Back to the top
-
- Posts: 1414
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: Adam
- Last Name: Doleshal
- * REQUIRED* Type and Year of Model Ts owned: ‘13 Touring, ‘24 Touring, ‘25 TT dump truck, ‘26 Tudor, ‘20 Theiman harvester T powerplant, ‘20 T Staude tractor
- Location: Wisconsin
- MTFCA Number: 23809
- MTFCI Number: 1
- Board Member Since: 2000
Re: Info on regound cam????
Post a picture. If the heel is ground back into the minor shaft diameter it is likely a poor quality regrind.