Help for a friend
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 1960
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Juhl
- * REQUIRED* Type and Year of Model Ts owned: 1917 Touring
- Location: Thumb of Michigan
- MTFCA Number: 50297
- MTFCI Number: 24810
- Board Member Since: 2018
Help for a friend
A buddy of mine is going to pick up his first Model T (1922) next Tuesday. He helped me get my T going so I'm going to do the same for him. I have a couple of questions for the group.
1.) Is there anyone who will re-core a 1922 low radiator or is Bergs or Brassworks the only option to get a serviceable flat-tube radiator?
2.) Is there a guide anywhere on how to use a hand cranked coil tester (HCCT)? Another friend has a tester he got out of an old Ford dealership 50+ years ago and we'd like to get an idea of the condition of the coils. The previous owner of the T has been deceased a number of years and there is no info on what he did with the car restoration-wise.
I'm sure we'll have more questions....that's part of the fun
1.) Is there anyone who will re-core a 1922 low radiator or is Bergs or Brassworks the only option to get a serviceable flat-tube radiator?
2.) Is there a guide anywhere on how to use a hand cranked coil tester (HCCT)? Another friend has a tester he got out of an old Ford dealership 50+ years ago and we'd like to get an idea of the condition of the coils. The previous owner of the T has been deceased a number of years and there is no info on what he did with the car restoration-wise.
I'm sure we'll have more questions....that's part of the fun
1917 Touring
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
-
- Posts: 3001
- Joined: Sun Jan 06, 2019 4:06 pm
- First Name: Jerry
- Last Name: Van
- Location: S.E. Michigan
- MTFCA Number: 24868
Re: Help for a friend
Tim,
Check with Steve Shotwell, I believe the Casual T's owns a Strobo Spark coil tester for the use of our members.
http://www.casualts.org/toolshare.htm
Check with Steve Shotwell, I believe the Casual T's owns a Strobo Spark coil tester for the use of our members.
http://www.casualts.org/toolshare.htm
-
- Posts: 545
- Joined: Sun Jan 06, 2019 12:27 pm
- First Name: BOB
- Last Name: CASCISA
- * REQUIRED* Type and Year of Model Ts owned: 1916 TOURING
- Location: POULSBO, WA
- MTFCA Number: 16897
- MTFCI Number: 16628
Re: Help for a friend
People have used local shops to re-core a radiator.
Be sure to see if they have experience with antique radiators.
Here is a link to the HCCT Handbook sold by MTFCA.
https://modeltstore.myshopify.com/colle ... -patterson
Be sure to see if they have experience with antique radiators.
Here is a link to the HCCT Handbook sold by MTFCA.
https://modeltstore.myshopify.com/colle ... -patterson
Respectfully Submitted,
Be_Zero_Be
I drive a Model T ... Microseconds don't matter
For every Absolute Model T Fact there are at least three exceptions.
Be_Zero_Be
I drive a Model T ... Microseconds don't matter
For every Absolute Model T Fact there are at least three exceptions.
-
- Posts: 540
- Joined: Mon Jan 07, 2019 2:02 pm
- First Name: Vernon
- Last Name: Worley
- * REQUIRED* Type and Year of Model Ts owned: October 26, 1926 Coupe
- Location: New Orleans, LA
- MTFCA Number: 49462
- Contact:
Re: Help for a friend
Any radiator shop that does repair work should be able to re-core any brass radiator. The shop here in New Orleans told me that I could have my non-T radiator replaced or re-cored for the same price (about $300). They would just reuse the top and lower tanks. The question is will the core look original, or does that matter to you.
Vern (Vieux Carre)
-
- Posts: 3001
- Joined: Sun Jan 06, 2019 4:06 pm
- First Name: Jerry
- Last Name: Van
- Location: S.E. Michigan
- MTFCA Number: 24868
Re: Help for a friend
Not true. I've seen some real butcher jobs. The biggest problem seems to be that, unless they have worked on early radiators, they don't realize that these radiators can be seen and have to look nice and also have to fit within a close fitting radiator shell.
Last edited by Jerry VanOoteghem on Sat Jun 19, 2021 8:53 am, edited 1 time in total.
-
- Posts: 304
- Joined: Sun Mar 03, 2019 10:13 pm
- First Name: Dennis
- Last Name: Hoshield
- * REQUIRED* Type and Year of Model Ts owned: '24 RPU (Raodster converted to Pickup)
- Location: Petoskey, MI
- MTFCA Number: 24305
- Board Member Since: 2015
- Contact:
Re: Help for a friend
I had my radiator (24 roadster) recorded by Ferndale radiator, I believe. My overheating issues are now home! That was about 4-5 years ago. Aparently, he has done a lot of old radiator cores. It looks and works fine for me.
'24 RPU
Petoskey, Mi
Petoskey, Mi
-
Topic author - Posts: 1960
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Juhl
- * REQUIRED* Type and Year of Model Ts owned: 1917 Touring
- Location: Thumb of Michigan
- MTFCA Number: 50297
- MTFCI Number: 24810
- Board Member Since: 2018
Re: Help for a friend
Thanks Dennis - Ferndale is an easy road trip so I think we'll check them out once we get the T home. Jerry, the buyer is a Casual T member so we're adding another T to the club.
1917 Touring
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
-
- Posts: 150
- Joined: Sun Jan 06, 2019 2:49 pm
- First Name: Jim
- Last Name: Wilson
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster Pickup
- Location: NE Mississippi
Re: Help for a friend
Ditto re making sure the shop you go to has experience with antique auto radiators. Years ago, I spoke to several radiator shops who were honest and didn’t feel they could do the job. I finally found a shop that had an elderly gentleman that only worked on antique radiators. He worked part time at his own pace but got my work done. The owner said he wouldn’t let any of his other guys touch my radiator.
-
Topic author - Posts: 1960
- Joined: Sun Jan 06, 2019 11:39 am
- First Name: Tim
- Last Name: Juhl
- * REQUIRED* Type and Year of Model Ts owned: 1917 Touring
- Location: Thumb of Michigan
- MTFCA Number: 50297
- MTFCI Number: 24810
- Board Member Since: 2018
Re: Help for a friend
It seems that the only guys to be trusted with our radiators are near or beyond retirement age. My go-to guy retired recently and the fellow he referred me to said he's going to retire this October. It's a dying art in today's throw-away society.
1917 Touring
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor
-
- Posts: 4967
- Joined: Sat Jan 05, 2019 1:57 pm
- First Name: Mark
- Last Name: Gregush
- * REQUIRED* Type and Year of Model Ts owned: 1925 cutdown PU, 1920 Dodge touring, 1948 F2 Ford flat head 6 pickup 3 speed
- Location: Portland Or
- MTFCA Number: 52564
- Board Member Since: 1999
Re: Help for a friend
Our go to guy was in his early 30's. He did great work, learned from his Dad and Grandpa, just could not make enough to keep the shop open and now is selling auto parts.
I know the voices aren't real but damn they have some good ideas!
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
1925 Cut down pickup
1920 Dodge touring
1948 Ford F2 pickup
-
- Posts: 339
- Joined: Sun Jan 06, 2019 5:25 pm
- First Name: John
- Last Name: Saylor
- * REQUIRED* Type and Year of Model Ts owned: 1921 Touring, 1927 Tudor
- Location: Citrus Heights, Ca
- MTFCA Number: 1695
- MTFCI Number: 23870
- Board Member Since: 1999
Re: Help for a friend
I have had three black re-cores over the years. The first two done in the late 60's. both were done without the stiffening bar that runs mount to mount. Cost about $35 back then. I still have one of those cars, 21 Touring. The radiator ran for about 30 years but developed small leaks at the solder joints. and I finally bought a new one. I believe the absence of the stiffening bar contributed to the leaks. My last re-core 27 Tudor, was in 1994. The shop was able to obtain a new core with the correct stiffening bar. It cost me $375 out the door. Now here in the Sacramento- Auburn area re-cores without the bar are running $550. For just a little bit more you can buy a new Berg's or Brassworks and never have to worry about it ever.
-
- Posts: 97
- Joined: Wed Mar 13, 2019 10:46 am
- First Name: John
- Last Name: Aldrich
- * REQUIRED* Type and Year of Model Ts owned: 1915, 1923. 1927
- Location: Kapowsin WA
Re: Help for a friend
I've had good luck by simply telling the radiator rebuild shop that this isn't a pressurized system. Have had three re-cored.BE_ZERO_BE wrote: ↑Thu Jun 17, 2021 11:40 amPeople have used local shops to re-core a radiator.
Be sure to see if they have experience with antique radiators.
Here is a link to the HCCT Handbook sold by MTFCA.
https://modeltstore.myshopify.com/colle ... -patterson
John Aldrich
Typical Model T Addict
Typical Model T Addict
-
- Posts: 2789
- Joined: Sun Jan 06, 2019 12:26 pm
- First Name: Dallas
- Last Name: Landers
- * REQUIRED* Type and Year of Model Ts owned: 26 Rpu, 23 TT, 24 coupe,
- Location: N.E. Indiana
- MTFCA Number: 49995
Re: Help for a friend
Just make sure they understand its not pressurised. I told a local shop that and they called and said it needed recored. I said it was a small leak. He told me it really started leaking at 7lbs and at 10lbs it leaked everywhere. I now have a recore.