Hi Guys,
I'm rebuilding a bronze L4 Carburetor to install on my Model T, and it's missing the bowl nut. The bronze carb, takes a much smaller bowl nut than the iron one does, so I can't swap it out from my other carb. Do any of you know what size bowl nut I need.
Thanks for any help you can give me,
Gil
Bowl Nut for Bronze Kingston L4 Carburetor
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 6
- Joined: Mon Jul 15, 2019 5:30 pm
- First Name: Gil
- Last Name: D'Aquin
- * REQUIRED* Type and Year of Model Ts owned: 1926 Model T Touring Car
- Location: New Orleans, Louisiana
- Board Member Since: 2019
- Contact:
-
- Posts: 6431
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: Bowl Nut for Bronze Kingston L4 Carburetor
either 9/16-18 or 3/4-18 depending on year
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured