Holley vaporizer adjustment
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 154
- Joined: Wed Jan 09, 2019 4:52 pm
- First Name: Larry
- Last Name: Rutt
- * REQUIRED* Type and Year of Model Ts owned: 1926 fordor
- Location: Ephrata pa
Holley vaporizer adjustment
Does that look like the right float adjustment for my holley vaporizer ? I am having trouble running out the prime, so I thought I should check the fuel level in my carb..
-
- Posts: 6435
- Joined: Sun Jan 06, 2019 11:18 am
- First Name: Scott
- Last Name: Conger
- * REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
- Location: Clark, WY
- Board Member Since: 2005
Re: Holley vaporizer adjustment
Larry
your question is kind of cryptic, but I am going to go out on a limb and say that based on the existing float, you are running the fuel too high, and also that you are running the wrong float altogether. Take a look at this: http://www.mtfca.com/cgi-bin/discus/sho ... st=1013819
your question is kind of cryptic, but I am going to go out on a limb and say that based on the existing float, you are running the fuel too high, and also that you are running the wrong float altogether. Take a look at this: http://www.mtfca.com/cgi-bin/discus/sho ... st=1013819
Scott Conger
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
Tyranny under the guise of law is still Tyranny
NH Full Flow Float Valves
Obsolete carburetor parts manufactured
-
Topic author - Posts: 154
- Joined: Wed Jan 09, 2019 4:52 pm
- First Name: Larry
- Last Name: Rutt
- * REQUIRED* Type and Year of Model Ts owned: 1926 fordor
- Location: Ephrata pa
Re: Holley vaporizer adjustment
Your right... my old thicker float was cracked.. the venders dont sell the float for the vaporizer, I was told from langs it would work.. I guess I'll take your advice and lower the level and see what happens.
-
Topic author - Posts: 154
- Joined: Wed Jan 09, 2019 4:52 pm
- First Name: Larry
- Last Name: Rutt
- * REQUIRED* Type and Year of Model Ts owned: 1926 fordor
- Location: Ephrata pa
Re: Holley vaporizer adjustment
Or would some of this stuff seal a crack in my old bigger float ?
-
- Posts: 279
- Joined: Sun Jan 06, 2019 1:58 pm
- First Name: Bill
- Last Name: Dizer
- * REQUIRED* Type and Year of Model Ts owned: 1925 coupe, 1927 depot hack
- Location: Spencer, IN
- MTFCA Number: 28610
- MTFCA Life Member: YES
- Board Member Since: 2014
Re: Holley vaporizer adjustment
No, that and all silicone products react to gasoline.
-
Topic author - Posts: 154
- Joined: Wed Jan 09, 2019 4:52 pm
- First Name: Larry
- Last Name: Rutt
- * REQUIRED* Type and Year of Model Ts owned: 1926 fordor
- Location: Ephrata pa
Re: Holley vaporizer adjustment
So I adjusted my fuel level down and it did a bit better.. of course it was warmer today .. I think I'll take it down a little more and see what happens.