Page 1 of 1
WIRING HARNESS ROUTING
Posted: Sat Sep 11, 2021 9:27 pm
by Professor Fate
Can someone please post some pics of proper generator/headlight wiring harness routing, from the firewall down the frame beyond the steering column frame attach point , on a '26? Do I need clips?
Thanks!
Re: WIRING HARNESS ROUTING
Posted: Sat Sep 11, 2021 9:31 pm
by Scott_Conger
Re: WIRING HARNESS ROUTING
Posted: Sun Sep 12, 2021 12:45 pm
by Professor Fate
Anybody have an actual photo of their set up?
I'd like to see along the frame by the steering column.
Re: WIRING HARNESS ROUTING
Posted: Sun Sep 12, 2021 10:14 pm
by TFowler
This is the wire routing on my 27 tudor. 2 clamps on drivers side...wire loom goes up to radiator ...then runs along base of radiator (3 metal tabs on radiator hold wire loom) to right hand side (generator and head lamp)
Re: WIRING HARNESS ROUTING
Posted: Sun Sep 12, 2021 10:35 pm
by Professor Fate
Thanks Todd.
Mine is routed like your pic now. Might add a clamp to hold it in place.
Thank you!
Re: WIRING HARNESS ROUTING
Posted: Mon Sep 13, 2021 12:34 pm
by Professor Fate
All set!!!