Miller head update

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Model T Tom
Posts: 429
Joined: Mon Jan 07, 2019 9:26 pm
First Name: Thomas
Last Name: Butterworth
* REQUIRED* Type and Year of Model Ts owned: 1911 speedster
Location: Florida

Miller head update

Post by Model T Tom » Mon Oct 11, 2021 10:28 am

Top is all finished
Screenshot_20211011-102524~2.png


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Miller head update

Post by TXGOAT2 » Mon Oct 11, 2021 1:17 pm

Is it iron or aluminum?


Scott_Conger
Posts: 6431
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Miller head update

Post by Scott_Conger » Mon Oct 11, 2021 1:46 pm

Tom

as I previously said, I was skeptical, and as I followed up before, now I'm just humbled. Very, very nice pattern work, and exemplary foundry work.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


CraneJon
Posts: 92
Joined: Sun Jan 06, 2019 10:55 am
First Name: jon
Last Name: crane
* REQUIRED* Type and Year of Model Ts owned: 1925 T pickup, 1928 A, 1931 A
Location: rochester mich

Re: Miller head update

Post by CraneJon » Mon Oct 11, 2021 3:21 pm

Tom
Did not see you in Hershey
Jon


Topic author
Model T Tom
Posts: 429
Joined: Mon Jan 07, 2019 9:26 pm
First Name: Thomas
Last Name: Butterworth
* REQUIRED* Type and Year of Model Ts owned: 1911 speedster
Location: Florida

Re: Miller head update

Post by Model T Tom » Mon Oct 11, 2021 6:46 pm

This is iron but will be available in aluminum as well. Testing soon


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Miller head update

Post by TXGOAT2 » Mon Oct 11, 2021 6:58 pm

What type chamber and about what compression would be obtained with stock pistons (or others)?


Topic author
Model T Tom
Posts: 429
Joined: Mon Jan 07, 2019 9:26 pm
First Name: Thomas
Last Name: Butterworth
* REQUIRED* Type and Year of Model Ts owned: 1911 speedster
Location: Florida

Re: Miller head update

Post by Model T Tom » Wed Oct 13, 2021 9:09 am

The chamber is a crow foot design . Compression is 6.25 with stock pistons.


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Miller head update

Post by TXGOAT2 » Wed Oct 13, 2021 10:16 am

Interesting.....


ModelTWoods
Posts: 1049
Joined: Tue Jan 08, 2019 10:53 am
First Name: Terry
Last Name: Woods
* REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
Location: Cibolo (San Antonio), TX
MTFCI Number: 20180

Re: Miller head update

Post by ModelTWoods » Wed Oct 13, 2021 10:51 pm

Tom, If the heads test good, and you're still taking orders, put me down for an IRON head. I sent you an email, but hadn't got a reply.


Topic author
Model T Tom
Posts: 429
Joined: Mon Jan 07, 2019 9:26 pm
First Name: Thomas
Last Name: Butterworth
* REQUIRED* Type and Year of Model Ts owned: 1911 speedster
Location: Florida

Re: Miller head update

Post by Model T Tom » Thu Oct 14, 2021 6:36 am

After testing I will be taking orders .


ModelTWoods
Posts: 1049
Joined: Tue Jan 08, 2019 10:53 am
First Name: Terry
Last Name: Woods
* REQUIRED* Type and Year of Model Ts owned: 1927 Model T coupe, 1926 4 door sedan
Location: Cibolo (San Antonio), TX
MTFCI Number: 20180

Re: Miller head update

Post by ModelTWoods » Thu Oct 14, 2021 9:05 am

Model T Tom wrote:
Thu Oct 14, 2021 6:36 am
After testing I will be taking orders .
Thanks, Tom. I, and many others, I'm sure, will be waiting.


BHarper
Posts: 221
Joined: Sun Jan 06, 2019 11:15 am
First Name: Bill
Last Name: Harper
* REQUIRED* Type and Year of Model Ts owned: '14 Touring, '20 TT Farm Truck, '24 TT Depot Hack, '24 Coupe, and a 1914 Metz Model 22 Torpedo Runabout
Location: Keene, New Hampshire
MTFCA Number: 5414
MTFCA Life Member: YES
Board Member Since: 1999

Re: Miller head update

Post by BHarper » Fri Oct 15, 2021 12:24 pm

I am keenly interested in your project and hope that the testing goes well.

Post Reply Previous topicNext topic