Steering wheel wooden rim construction
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 592
- Joined: Sun Jan 06, 2019 11:46 am
- First Name: Corey
- Last Name: Walker
- * REQUIRED* Type and Year of Model Ts owned: 1914 runabout, 1921 homemade truck, 1921 Speedster
- Location: Brownsboro, TX
- MTFCA Number: 51502
- Board Member Since: 2007
Steering wheel wooden rim construction
It seems like I read before that the original steering wheels were one piece of wood with one finger joint. I sanded the old paint from this one and it is a single finger joint but on 2 pieces of wood, an inner and an outer. I’ve seen wheel rims advertised as “2 piece”. I pictured 2 halves put together, not 2 one piece rings glued together. Is this how they all were made?
Corey Walker, Brownsboro, Texas