Has anyone made these pieces for a 24/5 coupe or sedan
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 1385
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John
- Last Name: Tannehill
- Location: Hot Coffee, MS
- MTFCA Number: 49460
Has anyone made these pieces for a 24/5 coupe or sedan
Hi forum, not having much luck locating the following parts for a young guy working on a coupe. I’m sure others may have had the same issue. If you have made these parts what did you use and do you have any patterns that I could get from you? Thanks for your help. John
-
- Posts: 6815
- Joined: Fri Jan 04, 2019 10:51 am
- First Name: Richard
- Last Name: Eagle
- * REQUIRED* Type and Year of Model Ts owned: 1909 TR 1914 TR 1915 Rd 1920 Spdstr 1922 Coupe 1925 Tudor
- Location: Idaho Falls, ID
- MTFCA Number: 1219
- Contact:
Re: Has anyone made these pieces for a 24/5 coupe or sedan
I certainly thought about making one. That was one of the most elusive parts to find for my Tudor. Like other symmetrical parts we often find several rights before we find a left or visa versa.
I hope you find one. They are out there.
Rich
That would be some tricky bending of 17 gauge (.056). The hours in trial and error to make the tooling and fabricate a few would be far more than most would want to spend on them. However, making one when you need one can be very satisfying.I hope you find one. They are out there.
Rich
When did I do that?
-
- Posts: 4144
- Joined: Tue Jan 08, 2019 7:31 pm
- First Name: Dan
- Last Name: Hatch
- Location: Alabama
- MTFCA Number: 49974
Re: Has anyone made these pieces for a 24/5 coupe or sedan
John: A few years back I parted out a 24 coupe. I had those but may have sold them. I will look but I can not remember seeing them lately. Will let you know if I find them. Dan
-
Topic author - Posts: 1385
- Joined: Sun Jan 06, 2019 11:57 am
- First Name: John
- Last Name: Tannehill
- Location: Hot Coffee, MS
- MTFCA Number: 49460
Re: Has anyone made these pieces for a 24/5 coupe or sedan
Dan that would be awesome. Thanks