Page 1 of 1

More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs

Posted: Thu Mar 31, 2022 5:57 pm
by Scott_Conger
these

IMG_20220329_111735 a.png
IMG_20220331_140848.png
IMG_20220329_123156 a.png
IMG_20220331_145137.png


will soon become these - Idle Jets:

new vs old Stromberg OF idle jet picture2.gif

Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs

Posted: Thu Mar 31, 2022 6:03 pm
by Brent Teltow
Nice work!

Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs

Posted: Thu Mar 31, 2022 6:09 pm
by Henry K. Lee
Pretty good for a clock doctor! LOL! Good therapy Scott!

Hank

Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs

Posted: Thu Mar 31, 2022 6:17 pm
by Rich Eagle
WOW! That is nice work.
Thanks for posting it.
Rich

Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs

Posted: Fri Apr 01, 2022 9:51 pm
by MKossor
Like :) Nice work indeed.

Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs

Posted: Sun Apr 03, 2022 10:25 pm
by John bevardos
Class act!!

Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs

Posted: Mon Apr 18, 2022 3:20 pm
by Scott_Conger
Idle jet orifices: barely larger than a grain of rice:
IMG_20220418_121016_1CS.jpg

very fine drilling required...next time will have a proper precision hand feed chuck...in this case the drill survived being in the manual turret. Drill diameter used was the very minimum the chuck would take:
IMG_20220418_120652_1CS.jpg

first part of assembly (no deburing or cleaning yet). Jet visible in lower hole:
IMG_20220418_121914_1CS.jpg

Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs

Posted: Mon Apr 18, 2022 5:21 pm
by Henry K. Lee
Nice work Scott like always. Now go and give those eyeballs a rest!

Hank

Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs

Posted: Mon Apr 18, 2022 6:27 pm
by Jack Putnam, in Ohio
Fantastic work, I'm glad to see that you can make such precision parts.

Re: More CNC work (Crank 'n Cut) on Stromberg 'OF' carbs

Posted: Tue Apr 19, 2022 4:45 pm
by Scott_Conger
Final Assemblies coming off the fixture:

IMG_20220419_142926.jpg