MTFCA Forum

I need some help identifying some wood from an older wood kit that came with my car. First a big thank you to Tom Miller. He was able to help with several parts.

Now on to what I'm trying to figure out. Each part was labeled T2726T and had a number 1-16. I'm trying to take the list from FORD WOOD and match up the numbers so I can use their diagram and see where they go. Here is what I have. That last piece of wood labeled T2627 T6 is the same shape as the other two labeled T2727 T6 but a lot thiner.
and what I have Identified on the FORD WOOD list


Can someone tell me that for example T2627 T7 is number 603 and 604 Etc....
Thank you so much.

You may want to find a T Body parts book. They have the wood shown in them.

I have this book.
Looking at the 26/27 picture is does show some wood but not the small parts I need.

Unless there is another book that I don't have.

There has to be someone out there working on a 26/27 Touring. I can't be the only one.

I am, but I will not be able to help since I am as clueless as you are.

Jonah, I'm going o try to give Ford Wood a call and hope they can help. Not that many parts but still hard to figure it all out.

Wish I could help. I have a 26-27 body on a 21 frame. It came with a wood kit from JC Whitney and I haven't opened it up. Don't have time and it's in the back of the garage with tons of new bathroom cabinet stuff that is getting ready to go in to 2 new bathrooms. Progress interferes with progress.

The top two pieces (-7) should match up with 603 & 604 in the list. The notches are for clearance with the door striker hardware.