Unusual NH Carburetor

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
User avatar

Topic author
mbowen
Posts: 333
Joined: Tue Aug 31, 2021 7:45 pm
First Name: Miles
Last Name: Bowen
* REQUIRED* Type and Year of Model Ts owned: 1925 Express Wagon, 1924 Touring
Location: Brighton, MI
MTFCA Number: 51651
MTFCI Number: 25343
Board Member Since: 2021

Unusual NH Carburetor

Post by mbowen » Tue Jul 05, 2022 8:33 pm

Bonnie, my 24 touring, ran fine yesterday on a 38-mile ride to a club fund raiser and for the first seven or eight 2-mile passengers rides through town, then started running rough. Replacing a broken spark plug wire and one coil effected no improvement. All 4 spark plugs were extremely sooty (but dry), indicating a rich mixture condition. It seemed to get worse, and I and others helping could smell raw fuel in the exhaust, and there was occasional popping out of the exhaust. Adjusting the mixture control made no difference, and it wasn’t leaking to indicate an issue with the float. It eventually got so bad that it would just barely go down the road, so I decided to leave it in a local club member’s garage. Today I went back armed with a rebuilt NH I got from Corey Walker last winter. That fixed the issue, proving that the carburetor was the culprit.

However, upon looking through the bore of the removed straight through NH carburetor, I couldn’t see through it, then noticed a third butterfly plate just downstream of the choke plate. There is no external control, but when the carburetor is right side up it closes off the bore, and when upside down flops open. Apparently it is intended be closed when the engine isn’t running, then open due to airflow when the engine is running. The club member who let me use his garage has been driving Model T’s for well over 50 years and said he’d never seen one like that, and none of the several NH’s (straight through or not) in his collection has this feature. We are thinking it might be a feature to keep mud wasps out?

Has anyone here ever seen an NH like this or really know it’s purpose? You can tell from outside by a screw on the engine side of a mounted carburetor, which is apparently the pivot for the plate. Is it possible that this plate became stuck in some intermediate position causing the over-rich condition?
0A92B804-5353-49A1-80CC-9F97D9764D15.jpeg
A26FD3D9-1F44-49B5-96CE-958199B0B021.jpeg
Miles
1924 Touring “Bonnie”
1925 Express Wagon “Clyde”


Norman Kling
Posts: 4070
Joined: Tue Jan 08, 2019 1:39 pm
First Name: Norman
Last Name: Kling
Location: Alpine California

Re: Unusual NH Carburetor

Post by Norman Kling » Tue Jul 05, 2022 8:45 pm

Are you sure that is a NH? It looks like a Kingston L4 to me. The Kingston has a flapper valve between the choke and the throttle.
Norm


Dan Hatch
Posts: 4111
Joined: Tue Jan 08, 2019 7:31 pm
First Name: Dan
Last Name: Hatch
Location: Alabama
MTFCA Number: 49974

Re: Unusual NH Carburetor

Post by Dan Hatch » Tue Jul 05, 2022 9:05 pm

Looks like Western Auto or Simmons. That looks like heater post on exit end of carb.

User avatar

Oldav8tor
Posts: 1929
Joined: Sun Jan 06, 2019 11:39 am
First Name: Tim
Last Name: Juhl
* REQUIRED* Type and Year of Model Ts owned: 1917 Touring
Location: Thumb of Michigan
MTFCA Number: 50297
MTFCI Number: 24810
Board Member Since: 2018

Re: Unusual NH Carburetor

Post by Oldav8tor » Tue Jul 05, 2022 9:18 pm

The Kingston L4 has a little flapper like you describe. I take it there is no dataplate on the Carb?
1917 Touring
1946 Aeronca Champ
1952 Willys M38a1 Jeep (sold 2023)
1953 Ford Jubilee Tractor

User avatar

Topic author
mbowen
Posts: 333
Joined: Tue Aug 31, 2021 7:45 pm
First Name: Miles
Last Name: Bowen
* REQUIRED* Type and Year of Model Ts owned: 1925 Express Wagon, 1924 Touring
Location: Brighton, MI
MTFCA Number: 51651
MTFCI Number: 25343
Board Member Since: 2021

Re: Unusual NH Carburetor

Post by mbowen » Tue Jul 05, 2022 9:46 pm

There is a data plate on the carburetor. I have no clue as to its originality.
6F103E68-B60B-4045-B34E-CB22CFFB35B8.jpeg
Miles
1924 Touring “Bonnie”
1925 Express Wagon “Clyde”

User avatar

Mark Nunn
Posts: 1105
Joined: Mon Jan 07, 2019 8:01 am
First Name: Mark
Last Name: Nunn
* REQUIRED* Type and Year of Model Ts owned: 1926 Runabout
Location: Bennington, NE
MTFCA Number: 50321
Board Member Since: 2017

Re: Unusual NH Carburetor

Post by Mark Nunn » Tue Jul 05, 2022 10:23 pm

The L-4 flapper is near the throttle plate, not the choke plate. That is not an L-4.

User avatar

Pep C Strebeck
Posts: 519
Joined: Sun Jan 06, 2019 11:12 am
First Name: Joseph
Last Name: M
Location: MI
MTFCA Number: 0

Re: Unusual NH Carburetor

Post by Pep C Strebeck » Tue Jul 05, 2022 11:04 pm

Dan Hatch wrote:
Tue Jul 05, 2022 9:05 pm
Looks like Western Auto or Simmons. That looks like heater post on exit end of carb.

That is exactly what it is. Someone, somewhere down the line changed the name plate on the carburetor for some reason. The flapper is supposed to help with smoothing out the low speed idle characteristics.



IMG_6922.JPG
IMG_6923.JPG
Here are some links from the Old Forum as well as this one:

http://www.mtfca.com/discus/messages/70 ... 1486770519
http://www.mtfca.com/discus/messages/33 ... 1372906796
http://www.mtfca.com/discus/messages/41 ... 1406346710
viewtopic.php?f=2&t=23917&p=183527&hili ... ns#p183527
viewtopic.php?f=2&t=1790&p=15744&hilit=simmons#p15744
"Remember son, there are two ways to do this: The right way, and your way” Thanks Dad, I love you too.

LOOKING FOR A LUFKIN No. 9A Height Gage Attachment.

User avatar

Topic author
mbowen
Posts: 333
Joined: Tue Aug 31, 2021 7:45 pm
First Name: Miles
Last Name: Bowen
* REQUIRED* Type and Year of Model Ts owned: 1925 Express Wagon, 1924 Touring
Location: Brighton, MI
MTFCA Number: 51651
MTFCI Number: 25343
Board Member Since: 2021

Re: Unusual NH Carburetor

Post by mbowen » Wed Jul 06, 2022 10:05 am

Thank you Pep! It ran great until it didn’t. Is it likely that the flapper stuck and caused the over rich condition, or would the issue more likely be somewhere else?
Miles
1924 Touring “Bonnie”
1925 Express Wagon “Clyde”


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Unusual NH Carburetor

Post by TXGOAT2 » Wed Jul 06, 2022 10:12 am

I'd suspect the flapper. It may have some wear that allows it to jam. I'd think the flapper arrangement could improve low speed performance and allow a slightly leaner mixture. If the straight through NH has a larger venturi than a standard NH, it could degrade low speed performance somewhat, while improving high speed performance a little. The flapper may have been an attempt to improve the carburetor's performance across a wider speed range.


greenacres36
Posts: 134
Joined: Sun Sep 27, 2020 3:50 pm
First Name: Brian
Last Name: Williams
* REQUIRED* Type and Year of Model Ts owned: 1926 Tudor, 1915 Runabout
Location: Prospect, Ohio

Re: Unusual NH Carburetor

Post by greenacres36 » Wed Jul 06, 2022 11:04 am

That’s not a Kingston L4. The screw is on the wrong side of it to be for the flapper. Doesn’t look like the Kingstons that I have.


Allan
Posts: 5201
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Unusual NH Carburetor

Post by Allan » Wed Jul 06, 2022 8:21 pm

The brass tag says "Simmons super power carburetor".

Allan from down under.

User avatar

RajoRacer
Posts: 4308
Joined: Sun Jan 06, 2019 12:18 pm
First Name: Steve
Last Name: Tomaso
* REQUIRED* Type and Year of Model Ts owned: 1914 Touring, 1919 Centerdoor, 1924 TT C-Cab Express, 1925 Racer
Location: Longbranch, WA
MTFCA Number: 14972
MTFCI Number: 15411
Board Member Since: 2001

Re: Unusual NH Carburetor

Post by RajoRacer » Wed Jul 06, 2022 9:11 pm

That's not the same carburetor Allan - he posted it for comparison.


Wayne Sheldon
Posts: 3637
Joined: Sun Jan 06, 2019 3:13 pm
First Name: Wayne
Last Name: Sheldon
* REQUIRED* Type and Year of Model Ts owned: 1915 Runabout 1913 Speedster
Location: Grass Valley California, USA
Board Member Since: 2005

Re: Unusual NH Carburetor

Post by Wayne Sheldon » Wed Jul 06, 2022 10:03 pm

We are looking at two different carburetors. Pep C's has the Simmons tag on it. Miles B's has a "Ford NH" tag on it.
I can't tell if Miles' carburetor has the heater coil or not. The Simmons/Wizard carburetors were available either with or without that heater coil. Most do seem to have the coil, but I have seen one that never did.

Despite the "NH" tag, it appears that Miles' carburetor is a Simmons/Wizard by any name.

User avatar

Topic author
mbowen
Posts: 333
Joined: Tue Aug 31, 2021 7:45 pm
First Name: Miles
Last Name: Bowen
* REQUIRED* Type and Year of Model Ts owned: 1925 Express Wagon, 1924 Touring
Location: Brighton, MI
MTFCA Number: 51651
MTFCI Number: 25343
Board Member Since: 2021

Re: Unusual NH Carburetor

Post by mbowen » Thu Jul 07, 2022 12:02 am

Wayne, my carburetor doesn’t have the heater wire, but as Dan Hatch noticed it does have the post, so it did have the heater at one time. Now that I know the differences between an NH and a Simmons I’m convinced it’s a Simmons someone put a Ford NH tag on way back when. With the carburetor mounted on the engine you’d have to look REALLY close to tell it wasn’t an NH. Thanks to all for helping to solve this minor mystery.
Miles
1924 Touring “Bonnie”
1925 Express Wagon “Clyde”


Wayne Sheldon
Posts: 3637
Joined: Sun Jan 06, 2019 3:13 pm
First Name: Wayne
Last Name: Sheldon
* REQUIRED* Type and Year of Model Ts owned: 1915 Runabout 1913 Speedster
Location: Grass Valley California, USA
Board Member Since: 2005

Re: Unusual NH Carburetor

Post by Wayne Sheldon » Thu Jul 07, 2022 3:08 am

With modern gasoline, I would not recommend hooking up the heater wire. I seriously doubt using it would hurt anything, however, I also doubt having the wire hooked up and turned on really helped much with the poor fuels back in the day. It has been speculated, that the circle of coil likely did more good by stirring up the air flow than it ever did by the little bit of heat it could have warmed the poor fuel with in the first place. I would be tempted to make a replacement out of common steel wire and mount it just for that purpose, although I doubt even there it would make that much difference.

I would be curious to hear what you find checking your carburetor out? Is the flapper hanging up? Would a bit of work with a file fix it and get it working right again?

User avatar

Topic author
mbowen
Posts: 333
Joined: Tue Aug 31, 2021 7:45 pm
First Name: Miles
Last Name: Bowen
* REQUIRED* Type and Year of Model Ts owned: 1925 Express Wagon, 1924 Touring
Location: Brighton, MI
MTFCA Number: 51651
MTFCI Number: 25343
Board Member Since: 2021

Re: Unusual NH Carburetor

Post by mbowen » Thu Jul 07, 2022 12:08 pm

Wayne Sheldon wrote:
Thu Jul 07, 2022 3:08 am
… I would be curious to hear what you find checking your carburetor out? Is the flapper hanging up? Would a bit of work with a file fix it and get it working right again?
I have the carb from my express wagon to take as a spare on the Hamilton tour, so I probably won’t take time to really get into the Simmons until I get back. But I have noticed that the flapper valve doesn’t always open when I turn the carb upside down, and I have to shake it a bit to get it to flop open. There is a sticky film on the throttle plate that looks like the thread sealant I used on the sediment bowl and fuel shutoff valve, but there is no evidence of it upstream of the jet. I was wondering if I could just remove the flapper?
Miles
1924 Touring “Bonnie”
1925 Express Wagon “Clyde”


speedytinc
Posts: 3840
Joined: Fri Feb 12, 2021 12:24 pm
First Name: john
Last Name: karvaly
* REQUIRED* Type and Year of Model Ts owned: 14/15 wide track roadster. 23 touring, 27 roadster pickup, 20ish rajo touring
Location: orange, ca
MTFCA Number: 14383
Board Member Since: 2020

Re: Unusual NH Carburetor

Post by speedytinc » Thu Jul 07, 2022 12:34 pm

mbowen wrote:
Thu Jul 07, 2022 12:08 pm
Wayne Sheldon wrote:
Thu Jul 07, 2022 3:08 am
… I would be curious to hear what you find checking your carburetor out? Is the flapper hanging up? Would a bit of work with a file fix it and get it working right again?
I have the carb from my express wagon to take as a spare on the Hamilton tour, so I probably won’t take time to really get into the Simmons until I get back. But I have noticed that the flapper valve doesn’t always open when I turn the carb upside down, and I have to shake it a bit to get it to flop open. There is a sticky film on the throttle plate that looks like the thread sealant I used on the sediment bowl and fuel shutoff valve, but there is no evidence of it upstream of the jet. I was wondering if I could just remove the flapper?
The flapper is key to its design. Note the little brass jet @ the base when closed. Thats the idle circuit. I doubt it would function well without the functioning flapper. The flapper is a calibrated/weighted pot metal piece. It comes out easily. You need to sand/file on it to get it to move freely.


J1MGOLDEN
Posts: 945
Joined: Sun Jan 06, 2019 5:39 pm
First Name: James
Last Name: Golden
* REQUIRED* Type and Year of Model Ts owned: 1926 Model T Roadster
Location: Bowie, MD
MTFCA Number: 14294
MTFCI Number: 13562

Re: Unusual NH Carburetor

Post by J1MGOLDEN » Fri Jul 08, 2022 2:16 pm

A close look at the Ford Tag rivets will tell you someone switched tags, perhaps because they did not have the proper tag or wanted to upgrade the carburetor to sell it for more money, because the Ford carburetors are more desirable and sell for more money.

There are three Ford carburetors to choose from after 1920.

1. The Ford Full Flow.

2. The Ford-F

3. The Ford-NH

Post Reply Previous topicNext topic