Page 1 of 1

There was some noice on the driveshaft and the car stopped.

Posted: Tue Aug 23, 2022 7:11 am
by AndreFordT
"The car was barn find and driven as it was for a few miles.
Than there was some noice the car lost traction and the brake failed".

Here is what I found.

Next step will be the rear axle inspection but I think it will be no better.

Andre
Belgium

Re: There was some noice on the driveshaft and the car stopped.

Posted: Tue Aug 23, 2022 8:11 am
by Jim Eubanks
babbit washers failed on either side of the ring gear causing the ring gear and pinion to go half mesh which stripped things.