Cheap Parts & Tools

Discuss all things Model T related.
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules

Topic author
Jerry VanOoteghem
Posts: 2946
Joined: Sun Jan 06, 2019 4:06 pm
First Name: Jerry
Last Name: Van
Location: S.E. Michigan
MTFCA Number: 24868

Cheap Parts & Tools

Post by Jerry VanOoteghem » Tue Dec 06, 2022 3:36 pm

I don't know who John Ruskin is/was, but this quote of his, found on another forum that I look at, brought my mind back to this site... for some reason. :roll: I consider it humorous, so don't take offense please.

"There is hardly anything in the world that some man cannot make a little worse and sell a little cheaper, and the people who consider price only are this man's lawful prey."

John Ruskin


Rich P. Bingham
Posts: 1376
Joined: Sun Feb 13, 2022 11:24 am
First Name: Rich
Last Name: Bingham
Location: Blackfoot, Idaho
Board Member Since: 2015

Re: Cheap Parts & Tools

Post by Rich P. Bingham » Tue Dec 06, 2022 4:54 pm

John Ruskin 1819-1900. English writer, critic and polymath of the Victorian era.

Nowadays, they make stuff worse, charge more, and we are the unwilling prey, because there are no other options.
Get a horse !


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Cheap Parts & Tools

Post by TXGOAT2 » Tue Dec 06, 2022 4:56 pm

Ruskin later became a cigar.

Price and VALUE are not always the same thing.


Allan
Posts: 5201
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Cheap Parts & Tools

Post by Allan » Tue Dec 06, 2022 4:59 pm

Spot on Rich. However, nowdays we do have an alternative to the junk clincher tyres in Blockley's!

Allan from down under.


YellowTRacer
Posts: 434
Joined: Tue Jan 08, 2019 6:55 pm
First Name: Ed
Last Name: Archer
* REQUIRED* Type and Year of Model Ts owned: 1909 replica Transcontinental race car, 1915 2 man race car, 1918 American bodied speedster
Location: 1807 East Ave. Hayward, CA 94541
MTFCA Number: 19
MTFCA Life Member: YES
Board Member Since: 2009

Re: Cheap Parts & Tools

Post by YellowTRacer » Tue Dec 06, 2022 6:31 pm

Okay, you be the judge. Hypothetically------I'm a manufacturer and or a dealer. In order to make a quality generic part it takes me a substantial amount of time, plus the cost of the quality material I'm going to use, and so in order to make ends meet and me to make some sort of profit I charge $55.00 each for the item. A guy in another state also sees the need for this part and wants to make a buck and sell a lot of them, so he contracts with a company in China, has no idea what's in the materials they use, the finished item looks okay and he sells them for $27.00 each. Which guy is going to stay in business selling to Model T or Model A guys??? Sad but true.

Ed aka #4


Rich P. Bingham
Posts: 1376
Joined: Sun Feb 13, 2022 11:24 am
First Name: Rich
Last Name: Bingham
Location: Blackfoot, Idaho
Board Member Since: 2015

Re: Cheap Parts & Tools

Post by Rich P. Bingham » Tue Dec 06, 2022 6:51 pm

Precisely, Ed, and the reason why there are no alternatives to crap. Alas, partly what spurs this on is there are no standards for reproduction parts; more, the majority of "old car owners" do not require parts that will give yeoman service in hard-use situations. Like movie props, if it fills a hole and looks like the real thing, it will do. Few of us are qualified to tell if such parts will stand the gaff. Those whose involvement in the hobby is to own "trailer queens" will never find out the difference. Those of us crazy enough to drive them as if they were real cars remain frustrated.
Get a horse !


Tractordoc
Posts: 22
Joined: Sun Jan 06, 2019 12:41 pm
First Name: George
Last Name: Barclay
* REQUIRED* Type and Year of Model Ts owned: 1920 coupe
Location: West Michigan

Re: Cheap Parts & Tools

Post by Tractordoc » Tue Dec 06, 2022 8:53 pm

I remember a time late 70s early 80s I think, when most items in the store had a choice between the pricey item and the cheap Chinese item, apparently most chose the cheaper one and now thats all we get. I realize that there were other factors involved but I do believe that was part of it.


jiminbartow
Posts: 2202
Joined: Sun Jan 06, 2019 10:55 pm
First Name: James
Last Name: Patrick
* REQUIRED* Type and Year of Model Ts owned: 1926 Coupe
Location: Bartow, FL
MTFCA Number: 50126
Board Member Since: 2001

Re: Cheap Parts & Tools

Post by jiminbartow » Tue Dec 06, 2022 9:48 pm

That is why I prefer to buy original Model T parts on T-bay instead of reproductions. By most accounts, reproduced parts cannot meet the same high standards of original Ford parts and if you have patience, original Ford parts can almost always be found. Jim Patrick

User avatar

Steve Jelf
Posts: 6463
Joined: Fri Jan 04, 2019 9:37 pm
First Name: Steve
Last Name: Jelf
* REQUIRED* Type and Year of Model Ts owned: 1923 touring and a few projects
Location: Parkerfield, Kansas
MTFCA Number: 16175
MTFCI Number: 14758
Board Member Since: 2007
Contact:

Re: Cheap Parts & Tools

Post by Steve Jelf » Tue Dec 06, 2022 11:11 pm

There would be less shoddy merchandise if more people refused to buy it.
The inevitable often happens.
1915 Runabout
1923 Touring

User avatar

TRDxB2
Posts: 5407
Joined: Tue Jan 08, 2019 4:56 pm
First Name: Frank
Last Name: Brandi
* REQUIRED* Type and Year of Model Ts owned: Speedster (1919 w 1926)
Location: Moline IL
Board Member Since: 2018

Re: Cheap Parts & Tools

Post by TRDxB2 » Wed Dec 07, 2022 12:09 am

Price, Quality, Availability - pick any two :lol:
The past is a great place and I don't want to erase it or to regret it, but I don't want to be its prisoner either.
Mick Jagger


Allan
Posts: 5201
Joined: Sun Jan 06, 2019 7:21 pm
First Name: Allan
Last Name: Bennett
* REQUIRED* Type and Year of Model Ts owned: 1912 van, 1917 shooting brake, 1929 roadster buckboard, 1924 tourer, 1925 barn find buckboard, 1925 D &F wide body roadster, 1927LHD Tudor sedan.
Location: Gawler, Australia

Re: Cheap Parts & Tools

Post by Allan » Wed Dec 07, 2022 1:21 am

Too true Steve. But in the absence of other than shoddy tyres, and no specs to ensure quality, we were stuck with what we could get, nasty rubbish. Thankfully, we now have a choice.

Allan from down under.

User avatar

jsaylor
Posts: 334
Joined: Sun Jan 06, 2019 5:25 pm
First Name: John
Last Name: Saylor
* REQUIRED* Type and Year of Model Ts owned: 1921 Touring, 1927 Tudor
Location: Citrus Heights, Ca
MTFCA Number: 1695
MTFCI Number: 23870
Board Member Since: 1999

Re: Cheap Parts & Tools

Post by jsaylor » Wed Dec 07, 2022 11:34 am

There would be less shoddy merchandise if more people refused to buy it.
Should be "There would be less shoddy merchandise if vendors would refuse to sell it."


jiminbartow
Posts: 2202
Joined: Sun Jan 06, 2019 10:55 pm
First Name: James
Last Name: Patrick
* REQUIRED* Type and Year of Model Ts owned: 1926 Coupe
Location: Bartow, FL
MTFCA Number: 50126
Board Member Since: 2001

Re: Cheap Parts & Tools

Post by jiminbartow » Wed Dec 07, 2022 11:46 am

Whenever a group gets together in an effort to better their industry for the benefit of the consumer, the minute a decision is made that may affect the pocket book of the members of the group, at least one abandons the effort and it all falls apart. That is why nothing usually ever results from a well meaning endeavor where cooperation and participation are essential for success. Jim Patrick


Scott_Conger
Posts: 6428
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Cheap Parts & Tools

Post by Scott_Conger » Wed Dec 07, 2022 11:58 am

No one stays in business selling things people do not want or can not afford. The Worlds Largest Retailer is simple proof of that.

99% of people want "cheap" and that's the sole reason retailers like Walmart and others exist, despite the 99% frequently and loudly professing to hate to buy "Made in China". People are so predictable.

When is the last time you said "nope" to the $4.00 6-32 tap at ACE hardware and opted to go on line and buy the $18 USA MADE tap? Yeah, I didn't think so.

It's the unintended consequences of a misguided attempt to bring Chinese people out of slave-labor into a more democratic and prosperous world.

HAH! - Didn't they show us!

And how.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Cheap Parts & Tools

Post by TXGOAT2 » Wed Dec 07, 2022 12:14 pm

I've been out a good deal of money, at least in first cost, in the last couple of decades by reason of buying American-made whenever possible. It's becoming more difficult by the day to find new, made in USA merchandise.
It goes FAR beyond Wal Mart. Be it tires, agricultural supplies, automotive supplies, home & garden stuff, hand tools, power tools, industrial supplies, pipe fittings, etc; just about everything on the retail shelves is MADE ANYWHERE BUT HERE and usually MADE IN CHINA.

While I've paid substantially more for a wide variety of USA-made items at purchase, in most every case, the quality and durability of these items has offset the cost difference, and then some. I heard recently that over 90% of clothing sold in the USA is made elsewhere. Brand names mean nothing. Read the fine print. It's amazing how many places, other than the USA, that things are being manufactured, in whole or in part, for sale here. I will continue to buy MADE IN USA, to the extent that it is still possible to do so.

Food? Read the small print on the packaging. It's probably not from here, either.


JohnM
Posts: 578
Joined: Sun Mar 24, 2019 8:22 pm
First Name: John
Last Name: Michaelree
* REQUIRED* Type and Year of Model Ts owned: 1926 Touring 1927 Tudor
Location: st louis
MTFCA Number: 50389
Board Member Since: 2010

Re: Cheap Parts & Tools

Post by JohnM » Wed Dec 07, 2022 7:53 pm

Capitalism knows no borders, or pledges allegiance to any flag except to those who profit from their endeavors. I understand the frustration, but I think that's how it's supposed to work? Being an educated consumer is how we influence what is offered.

I will now turn off my computer before it catches on fire.
Last edited by JohnM on Thu Dec 08, 2022 10:13 pm, edited 2 times in total.


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Cheap Parts & Tools

Post by TXGOAT2 » Wed Dec 07, 2022 8:36 pm

Henry Ford was a Capitalist. A great deal of the cost of manufacturing in the USA is imposed by government at various levels, on various pretexts.


2nighthawks
Posts: 406
Joined: Sun Jul 21, 2019 2:53 am
First Name: Harold
Last Name: Schwendeman
* REQUIRED* Type and Year of Model Ts owned: '23 Roadster Pickup, '26 Touring, '27 Depot Hack, '23 Roadster
Location: Seattle
MTFCA Number: 0
Board Member Since: 2005

Re: Cheap Parts & Tools

Post by 2nighthawks » Wed Dec 07, 2022 9:12 pm

I have a theory about "brand names" and "Made in China" products:

I'm one of those "Seniors" that likes to stick to well known "brand names that originated way back when we were kids. but what I think happens all too often is something like this:

Some design engineer that works for an American company that sells a Chinese made item that bears a well known American brand name that we've been familiar with since our parents bought that high quality brand name item when we were kids,....that engineer comes up with a way whereby that item can be made much cheaper by contracting with the Chinese manufacturer, and looks as good as always and sells as well as ever, but wears out or breaks soon after purchase, and the engineer convinces his superiors that even if the reputation of that well known and highly respected brand name is thus ruined forever, their American company has made a huge profit (and the engineer gets a nice bonus) and even tho' the good reputation of that old respected American brand name is totally destroyed, the consumer blames the "Made in China" lable which has now become the supposed reason for the poor quality, when in reality, the Chinese manufacturer has provided exactly the poor quality that the American company bearing the old highly respected brand name has contracted the Chinese to build. It's called "corporate greed", and It's ALL about money,....period! Anyway,.....my "opinion", for what it's worth! .....harold


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Cheap Parts & Tools

Post by TXGOAT2 » Wed Dec 07, 2022 9:15 pm

There are hostile business climates, and there are benign business climates. The USA business climate has become increasingly hostile toward manufacturing and most other productive business activity in recent decades.
Last edited by TXGOAT2 on Thu Dec 08, 2022 7:34 am, edited 1 time in total.


Bryant
Posts: 1035
Joined: Sat Sep 11, 2021 3:11 pm
First Name: bryant
Last Name: shafer
* REQUIRED* Type and Year of Model Ts owned: 1926 tudor
Location: myersville maryland
MTFCA Number: 51736
Board Member Since: 2021

Re: Cheap Parts & Tools

Post by Bryant » Wed Dec 07, 2022 9:16 pm

“The high cost of a low price”
“Whether you think you can, or think you can’t-you’re right.”


Scott_Conger
Posts: 6428
Joined: Sun Jan 06, 2019 11:18 am
First Name: Scott
Last Name: Conger
* REQUIRED* Type and Year of Model Ts owned: '13, '15, '19, '23
Location: Clark, WY
Board Member Since: 2005

Re: Cheap Parts & Tools

Post by Scott_Conger » Wed Dec 07, 2022 9:20 pm

Harold

With respect, I can state with certainty that engineers do not sit around the cafeteria table dreaming of ways to make a good product cheaper/inferior and then sell that idea to Management.

It is 100% the other way around, and the engineer can either do as he is told, be fired, or quit.

I chose option 3 and I am enjoying my (very) early retirement more than anyone can imagine. Thank you very much, American Industry.
Scott Conger

Tyranny under the guise of law is still Tyranny

NH Full Flow Float Valves
Obsolete carburetor parts manufactured


DHort
Posts: 2461
Joined: Sun Jan 06, 2019 1:30 pm
First Name: Dave
Last Name: Hjortnaes
* REQUIRED* Type and Year of Model Ts owned: 24 Speedster, 20 touring
Location: Men Falls, WI
MTFCA Number: 28762
MTFCI Number: 22402

Re: Cheap Parts & Tools

Post by DHort » Wed Dec 07, 2022 11:34 pm

One reason why I never shop at Walmart.

I bought a Toro snowblower because it is built in WI, so I am supporting an American worker.

I bought a Model T too. It was American made. I hope the parts I need to keep it running are also Made in America.


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Cheap Parts & Tools

Post by TXGOAT2 » Thu Dec 08, 2022 7:36 am

Apple Music is getting a new karaoke feature and Tik Tok is like, exploding!


Topic author
Jerry VanOoteghem
Posts: 2946
Joined: Sun Jan 06, 2019 4:06 pm
First Name: Jerry
Last Name: Van
Location: S.E. Michigan
MTFCA Number: 24868

Re: Cheap Parts & Tools

Post by Jerry VanOoteghem » Thu Dec 08, 2022 11:52 am

TXGOAT2 wrote:
Thu Dec 08, 2022 7:36 am
Apple Music is getting a new karaoke feature and Tik Tok is like, exploding!
Thanks for your relevant observation Pat. I guess this is how you make 4441 postings in less than 2 years. :?

User avatar

Steve Jelf
Posts: 6463
Joined: Fri Jan 04, 2019 9:37 pm
First Name: Steve
Last Name: Jelf
* REQUIRED* Type and Year of Model Ts owned: 1923 touring and a few projects
Location: Parkerfield, Kansas
MTFCA Number: 16175
MTFCI Number: 14758
Board Member Since: 2007
Contact:

Re: Cheap Parts & Tools

Post by Steve Jelf » Thu Dec 08, 2022 12:15 pm

I bought a Model T too. It was American made. I hope the parts I need to keep it running are also Made in America.

Only if you run it without tires. :)
The inevitable often happens.
1915 Runabout
1923 Touring


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Cheap Parts & Tools

Post by TXGOAT2 » Thu Dec 08, 2022 1:53 pm

It is relevant. Extremely so. Look who and what is making BIG money in this country today. Look at their "product".


m_p_dean@yahoo.com
Posts: 46
Joined: Sat Oct 23, 2021 12:54 pm
First Name: Maurice
Last Name: Dean
* REQUIRED* Type and Year of Model Ts owned: 1917 Touring Car
Location: Mesa, AZ
MTFCA Number: 50442

Re: Cheap Parts & Tools

Post by m_p_dean@yahoo.com » Thu Dec 08, 2022 4:44 pm

"He knows the price of everything, and the value of nothing."


Ken Buhler
Posts: 426
Joined: Mon Jan 21, 2019 4:14 pm
First Name: Ken
Last Name: Buhler
* REQUIRED* Type and Year of Model Ts owned: 1927 Roadster 1927 Coupe
Location: Kelowna B.C.
MTFCA Number: 49471
Board Member Since: 2012

Re: Cheap Parts & Tools

Post by Ken Buhler » Fri Dec 16, 2022 10:56 am

I was quoted Ruskin many years ago and then found this match package which I have had taped in front of me at my desk for twenty five years.
Ruskin.jpg
Work honestly
Stay true to your word
Get the job done right


Topic author
Jerry VanOoteghem
Posts: 2946
Joined: Sun Jan 06, 2019 4:06 pm
First Name: Jerry
Last Name: Van
Location: S.E. Michigan
MTFCA Number: 24868

Re: Cheap Parts & Tools

Post by Jerry VanOoteghem » Fri Dec 16, 2022 10:59 am

Ken Buhler wrote:
Fri Dec 16, 2022 10:56 am
I was quoted Ruskin many years ago and then found this match package which I have had taped in front of me at my desk for twenty five years.Ruskin.jpg
Wow! That's cool!

User avatar

Bill Everett
Posts: 244
Joined: Tue Jan 08, 2019 8:29 pm
First Name: Bill
Last Name: Everett
* REQUIRED* Type and Year of Model Ts owned: 1911 Touring, 1914 Touring, 1912 Roadster PickUp in process
Location: Collierville, TN
MTFCA Number: 93
MTFCA Life Member: YES
Board Member Since: 2011

Re: Cheap Parts & Tools

Post by Bill Everett » Fri Dec 16, 2022 12:04 pm

It is the end-user, the consumer, that is the economic boss. It's not the manufacturer of a product, nor the distributor of that product, nor the manufacturer of a larger product that incorporates that first product into his finished, larger product; it's the consumer because he, and he alone, has the power to "stop the train" and reverse the consequences of our buying foreign made products. I't's no one else; it's the consumer, all by himself.

All that the consumer, and his neighbors need to do, is say "no" to purchasing products made overseas when there is a Made In USA alternative.


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Cheap Parts & Tools

Post by TXGOAT2 » Fri Dec 16, 2022 12:20 pm

Government policy at all levels plays a huge role in the manufacturing/import picture. It cannot be ignored. In many categories, new, domestic produced goods are no longer available in the USA. Many people genuinely cannot afford new, USA-made product, if and when it is available.

"...when there is a Made In USA alternative"

Yep.


Topic author
Jerry VanOoteghem
Posts: 2946
Joined: Sun Jan 06, 2019 4:06 pm
First Name: Jerry
Last Name: Van
Location: S.E. Michigan
MTFCA Number: 24868

Re: Cheap Parts & Tools

Post by Jerry VanOoteghem » Fri Dec 16, 2022 1:18 pm

The original theme of this all was the matter of "Quality versus Price", and not "Foreign versus Domestic". (I do realize the two are closely related.) Also, not about government versus manufacturing. It's about human nature making us the willing victims of the purveyors of junk.


TXGOAT2
Posts: 6411
Joined: Sun Feb 14, 2021 10:08 pm
First Name: Pat
Last Name: McNallen
* REQUIRED* Type and Year of Model Ts owned: 1926-7 roadster
Location: Graham, Texas
MTFCA Number: 51486
Board Member Since: 2021

Re: Cheap Parts & Tools

Post by TXGOAT2 » Fri Dec 16, 2022 1:41 pm

There is always a reason for a truly exceptionally low price. Usually, there are several. Many substantial costs associated with making products and services available to consumers are not under the control of raw materials suppliers, manufacturers, retailers, or consumers. The consumer pays all costs at retail.

Post Reply Previous topicNext topic