thread size for radius arms
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Topic author - Posts: 149
- Joined: Tue Jan 08, 2019 12:19 pm
- First Name: Donald
- Last Name: Goodwin
- * REQUIRED* Type and Year of Model Ts owned: 1924 touring
- Location: Medina Ohio
- Board Member Since: 2018
thread size for radius arms
Can someone tell me the thread size of the radius arms, I need to chase the threads and I do not have a pitch gauge. Thanks for any help
-
- Posts: 180
- Joined: Sun Jan 06, 2019 6:49 pm
- First Name: Christopher
- Last Name: Instness
- * REQUIRED* Type and Year of Model Ts owned: 1915 runabout, 1923 speedster
- Location: Roseville, Ca
- MTFCA Number: 52552
Re: thread size for radius arms
I believe the radius rods threads are 9/16-18.
-
- Posts: 596
- Joined: Sun Jan 06, 2019 6:10 pm
- First Name: Brad
- Last Name: Kirtner
- * REQUIRED* Type and Year of Model Ts owned: 1924 Touring Car, 1927 Closed Cab TT, 1927 Coupe
- Location: Salem, Virginia
- MTFCA Number: 50618
- Board Member Since: 2018
Re: thread size for radius arms
I just had the same problem. Save yourself some heartache and buy a two piece die that will "clamp" on and dig into the good threads. https://www.jmeinnovations.com/
-
- Posts: 596
- Joined: Sun Jan 06, 2019 6:10 pm
- First Name: Brad
- Last Name: Kirtner
- * REQUIRED* Type and Year of Model Ts owned: 1924 Touring Car, 1927 Closed Cab TT, 1927 Coupe
- Location: Salem, Virginia
- MTFCA Number: 50618
- Board Member Since: 2018
Re: thread size for radius arms
Here's a good option from amazon. 9/16-18 Split Die Thread Chaser https://www.amazon.com/dp/B003H2JWOI/re ... YCbF7FBCRJ