I have sent rocky mtn brake an email with not reply
Just need afew small things for TT brake setup
Source for rocky mountain brakes
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
- Posts: 3299
- Joined: Sun Jan 06, 2019 10:56 am
- First Name: Dan
- Last Name: Treace
- * REQUIRED* Type and Year of Model Ts owned: '23 cutoff, '25 touring, '27 touring
- Location: North Central FL
- MTFCA Number: 4838
- MTFCI Number: 115
- Board Member Since: 2000
- Contact:
Re: Source for rocky mountain brakes
Have phoned before to get replacement pieces, easiest way. More and more emails can just end up in spam at busy places.
Just remember the time zone at this CA location. Call mid day for best result
Just remember the time zone at this CA location. Call mid day for best result
The best way is always the simplest. The attics of the world are cluttered up with complicated failures. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
Don’t find fault, find a remedy; anybody can complain. Henry Ford
-
- Posts: 89
- Joined: Tue Jan 28, 2020 8:45 am
- First Name: Marty
- Last Name: Ray
- * REQUIRED* Type and Year of Model Ts owned: 1916 Runabout, 1922 Roadster
- Location: Texas
- MTFCA Number: 50870
- MTFCI Number: 25240
Re: Source for rocky mountain brakes
I had the same problem, they do not answer emails or phone calls concerning parts. I went through Chaffins, they had a more direct link, cell phone, etc.
-
- Posts: 3284
- Joined: Tue Jan 08, 2019 10:43 am
- First Name: Larry
- Last Name: Smith
- * REQUIRED* Type and Year of Model Ts owned: 13 Touring, 13 Roadster, 17 Coupelet, 25 Roadster P/U
- Location: Lomita, California
- MTFCA Number: 121
- MTFCA Life Member: YES
- MTFCI Number: 16310
Re: Source for rocky mountain brakes
There is nothing like the originals! A simple 3/16" cable to an equalizer, and a clamp to the standard brake pedal. The new ones work well, but why did Jack Sunderlin do it this way? He started off making them correctly, but got side tracked and thought all equalizers were alike, and that is why they now use the Bennett style equalizer. If he would have done the proper research for his brakes, rods would not be used today! I know all this because I was there at the time he was doing all of this. Research is the key to any reproduction part!