Page 1 of 1
Who Was Making 1912 Cast Iron Hot Air Stoves
Posted: Mon Apr 17, 2023 10:18 pm
by Distagon2
Someone please refresh my memory. Who was casting new 1912 cast iron hot air stoves? Would like to get one if possible.
Re: Who Was Making 1912 Cast Iron Hot Air Stoves
Posted: Mon Apr 17, 2023 10:59 pm
by pre15dale
That would be Chaffins that's where I got mine
Re: Who Was Making 1912 Cast Iron Hot Air Stoves
Posted: Mon Apr 17, 2023 11:06 pm
by JTT3
Daniel Mari AKA REDDOGPILOT
Re: Who Was Making 1912 Cast Iron Hot Air Stoves
Posted: Tue Apr 18, 2023 7:54 am
by Distagon2
Might anyone have contact info for him? I have not had any luck using this site's DM/email system.
Re: Who Was Making 1912 Cast Iron Hot Air Stoves
Posted: Tue Apr 18, 2023 8:33 am
by Jmeredith
Greg I am having the same issue with DM ‘s. Please contact me at gtojesse at yahoo dot com
Jesse.
Re: Who Was Making 1912 Cast Iron Hot Air Stoves
Posted: Tue Apr 18, 2023 3:33 pm
by JTT3
I spoke with Dan recently and he allowed that the foundry had made some but he was not satisfied with how they turned out and is having them recast with new molds. May take a bit longer. Best John
Re: Who Was Making 1912 Cast Iron Hot Air Stoves
Posted: Tue Apr 18, 2023 6:31 pm
by Distagon2
Well kudos to Dan for going to the trouble to get them cast, and not to mention his quality control!
Re: Who Was Making 1912 Cast Iron Hot Air Stoves
Posted: Tue Apr 18, 2023 10:18 pm
by Model T Ron
Anyone have a photo of one?
Re: Who Was Making 1912 Cast Iron Hot Air Stoves
Posted: Tue Apr 18, 2023 10:25 pm
by JTT3
Here is a picture borrowed from a thread.
Re: Who Was Making 1912 Cast Iron Hot Air Stoves
Posted: Fri Apr 21, 2023 10:47 pm
by Mark Gregush
It is possible depending on when your car was made, it could have used the pressed tin hot air stove. Go down this link and you will see some examples.
https://mtfca.com/phpBB3/viewtopic.php? ... vel#p98904
Re: Who Was Making 1912 Cast Iron Hot Air Stoves
Posted: Sat Apr 22, 2023 12:49 pm
by TRDxB2
There were some after market gas savers too (have some to sell - not pictured). Some discussions suggested removing the spring & turbo swilrs at the end of the tube.