Page 1 of 1
John Reagan’s Wheel Press: Link is broken
Posted: Fri May 05, 2023 11:38 am
by Tom Dove Jr
Does anyone know of a new link for the John Reagan Wheel Press?
The domain used to share the drawings/instructions is no longer active ... it is for sale.
Thanks!
Tom
=====
Re: John Reagan’s Wheel Press: Link is broken
Posted: Fri May 05, 2023 12:08 pm
by Steve Jelf
That means the link on my website is defunct too. I'll post the plans there instead of the link.
Re: John Reagan’s Wheel Press: Link is broken
Posted: Fri May 05, 2023 12:11 pm
by jsaylor
Tom, run a Google search - Regan Wheel Press mtfca - you will get several links on the topic.
Re: John Reagan’s Wheel Press: Link is broken
Posted: Fri May 05, 2023 1:34 pm
by CudaMan
Here is the drawing in a .pdf file, as well as a drawing of a hub bolt hole drilling jig:
Re: John Reagan’s Wheel Press: Link is broken
Posted: Fri May 05, 2023 4:32 pm
by TRDxB2
Tom Dove Jr wrote: ↑Fri May 05, 2023 11:38 am
Does anyone know of a new link for the John Reagan Wheel Press?
The domain used to share the drawings/instructions is no longer active ... it is for sale.
Thanks!
Tom
=====
The Funprojects web site no longer exists. Not sure what link your referencing
I had posted al the technical documents that were there in the forum
https://mtfca.com/phpBB3/viewtopic.php? ... ts#p277807
Re: John Reagan’s Wheel Press: Link is broken
Posted: Sat May 06, 2023 7:54 am
by Tom Dove Jr
Thank you, everyone!!
====
Re: John Reagan’s Wheel Press: Link is broken
Posted: Sat May 06, 2023 10:01 am
by jiminbartow
How about this. I believe these drawings are also posted in the drawings section of the MTFCA encyclopedia. Jim Patrick
Re: John Reagan’s Wheel Press: Link is broken
Posted: Sat May 06, 2023 2:06 pm
by Tom Dove Jr
This is all GREAT help!
I have acquired 3 complete sets of wheels over time so I'll tear down, clean up, and re-use what is usable and toss the rest.
Tom
=====