Page 1 of 1
Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 12:40 pm
by FATMAN
A good friend of mine drove his 2 lever out here, here are some photos, Bob
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 12:41 pm
by FATMAN
a few more
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 12:42 pm
by FATMAN
a few more photos
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 12:42 pm
by FATMAN
a few more photos
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 12:43 pm
by FATMAN
a few more photos
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 12:43 pm
by FATMAN
a few more photos
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 12:44 pm
by FATMAN
a few more photos
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 12:46 pm
by FATMAN
a few more photos
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 12:46 pm
by FATMAN
a few more photos
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 12:56 pm
by J1MGOLDEN
A super rare and evidently unknown original!
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 12:57 pm
by GEmering
This thread should come complete with a drool cup.
Beautiful!!!
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 1:14 pm
by Don Demio
Bob,
Thanks for sharing this slice of history.
Don
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 1:30 pm
by Rich Eagle
Thank you so much for sharing those photos. I especially enjoyed seeing them.
Rich
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 1:40 pm
by speedytinc
Bob, If it wouldnt be too much trouble, a few pictures of the linkage & mechanism for the 2 lever set up would be great.
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 2:49 pm
by TrentB
What’s its engine number?
Respectability requested,
Trent Boggess
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 3:33 pm
by Rich P. Bingham
What a treat to see this in detail !! Thank you much for posting all the great pix !!
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 3:53 pm
by Norman Kling
Very interesting. I saw one, in Orange County Ca. many years ago, but unfortunately, I didn't look at the pedals and later found out it was a two pedal after we had left that location.
norm
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 5:52 pm
by KimDobbins
Arron Crandle??
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 6:20 pm
by Aussie16
Thanks so much Bob for sharing this amazing piece of history. Great to see it gets driven! I am fortunate to have a 2 lever T nearby me in very similar original condition to the one in your post. It is a pleasure to study it as all the parts are so different event to the production 09 parts. They truly were an evolving almost prototype. The owner is very fortunate to have such an early piece of Ford history.
Re: Some photos of a 2 lever at the shop today
Posted: Sat May 27, 2023 6:51 pm
by DHort
Thank you for that, Bob. Someone did a lot of work polishing up all that brass. Nice to see the car being driven.
Re: Some photos of a 2 lever at the shop today
Posted: Sun May 28, 2023 12:07 am
by Rob
Great car, and photos. Thank you for posting.
Re: Some photos of a 2 lever at the shop today
Posted: Sun May 28, 2023 10:22 am
by FATMAN
Glad you all enjoyed, I will ask Aaron about the number, sorry no pictures of linkage, he only takes this out very few times a year, if you look in the Restoration handbook this car is in there with Less Henry standing by it, Bob
Re: Some photos of a 2 lever at the shop today
Posted: Sun May 28, 2023 11:02 am
by John Codman
Beautiful!
Re: Some photos of a 2 lever at the shop today
Posted: Sun May 28, 2023 12:16 pm
by FATMAN
Yes Aaron Crandahl, Bob
Re: Some photos of a 2 lever at the shop today
Posted: Sun May 28, 2023 12:56 pm
by Oldav8tor
Am I correct the 2nd lever has to do with reverse?
Re: Some photos of a 2 lever at the shop today
Posted: Sun May 28, 2023 6:38 pm
by pete eastwood
Very nice car!
It looks to me, that could be a slightly later 1909 body.
The very earliest bodies have some differences I don't see in this body.
Re: Some photos of a 2 lever at the shop today
Posted: Sun May 28, 2023 9:06 pm
by KimDobbins
Pete, the body number is 11551.
Re: Some photos of a 2 lever at the shop today
Posted: Mon May 29, 2023 8:26 pm
by EricMac
It was a real treat to see this in detail.
Re: Some photos of a 2 lever at the shop today
Posted: Tue May 30, 2023 1:27 am
by havnfun
Bob,
Thanks for sharing, it’s a beautiful piece of history and very enjoyable taking the journey in the way back machine aka time machine.
Re: Some photos of a 2 lever at the shop today
Posted: Tue May 30, 2023 2:53 am
by A Whiteman
Thank you for taking the time to share so many pictures of details. This is a great machine indeed.
Adrian
Re: Some photos of a 2 lever at the shop today
Posted: Tue May 30, 2023 5:15 am
by Tony_H
Thanks for sharing those great photos of this unique vehicle.
I wonder if any ever made it to Australia... now that'd be a find..
Re: Some photos of a 2 lever at the shop today
Posted: Wed May 31, 2023 9:21 pm
by Andrew Brand
Tony - a T arrived in Sydney in early 1909 and given the arrival date and likely shipping time, there's a good chance it was a 2 lever car. As for what became of it - I wish I knew!
Andrew
Re: Some photos of a 2 lever at the shop today
Posted: Thu Jun 01, 2023 5:03 pm
by A Whiteman
It is not OZ, but here is one that got to NZ: