Page 1 of 1
Reproduction Schrader 777 tire valve
Posted: Thu Nov 23, 2023 11:08 am
by Marc Roberts
I am thinking of having a batch of Schrader 777 style tire valves made. I have no idea what the price would be yet; naturally the number made would have a lot to do with the per unit cost. What I have in mind would be a valve ready to install on an inner tube with a nut and washer. You supply the outer nut, cap and dust cover. A reply, if you might be interested (assuming a reasonable price), and the number you could see yourself buying would be appreciated. Any other comments would be weclome. If anyone else is already doing this, let me know. I am only trying to fill a perceived need, not compete with anyone's established business.
Re: Reproduction Schrader 777 tire valve
Posted: Thu Nov 23, 2023 11:19 am
by Original Smith
That is a positive step. A&L did it for the Model A's. I prefer the 888 for my cars. It is 1/4" shorter and works just the same. Keep in mind Dan McEachern makes the correct rim nuts for these valves.
Re: Reproduction Schrader 777 tire valve
Posted: Thu Nov 23, 2023 11:20 am
by Tbird
Marc,
I would be interested in 6 of them.
Thanks!
Re: Reproduction Schrader 777 tire valve
Posted: Thu Nov 23, 2023 12:02 pm
by Humblej
I am in too, 5 for me.
Re: Reproduction Schrader 777 tire valve
Posted: Thu Nov 23, 2023 1:37 pm
by Tadpole
I’d be interested in at least one set of 5.
Re: Reproduction Schrader 777 tire valve
Posted: Thu Nov 23, 2023 4:46 pm
by CudaMan
Please put me down for 10, thanks. BTW, correct bridge washers are getting pretty tough to find as well.
Re: Reproduction Schrader 777 tire valve
Posted: Thu Nov 23, 2023 5:08 pm
by TMiller6
Marc,
I would be interested in ten. Thanks for looking into this project.