Outside oil line
Forum rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
If you need help logging in, or have question about how something works, use the Support forum located here Support Forum
Complete set of Forum Rules Forum Rules
-
Cambin
Topic author - Posts: 46
- Joined: Sun Jan 13, 2019 12:36 pm
- First Name: Cameron
- Last Name: Smythe
- * REQUIRED* Type and Year of Model Ts owned: 1925 Duncan and Fraser 1/2 ton pickup and a 1922 Sydney built steenbhoms tourer
- Location: Warragul Victoria AU
Outside oil line
Outside oil line
Last edited by Cambin on Tue Jul 09, 2019 6:36 am, edited 1 time in total.
-
Cambin
Topic author - Posts: 46
- Joined: Sun Jan 13, 2019 12:36 pm
- First Name: Cameron
- Last Name: Smythe
- * REQUIRED* Type and Year of Model Ts owned: 1925 Duncan and Fraser 1/2 ton pickup and a 1922 Sydney built steenbhoms tourer
- Location: Warragul Victoria AU
Re: Outside oil line
I was just finishing putting the last few bits back on my new engine when I discovered that the outside oil line was dodgy so I looked at my other engines oiler and copied it
It is a 1/2” copper fitting a bit of pipe and a plate
And this is how it came out
It is a 1/2” copper fitting a bit of pipe and a plate
And this is how it came out
- Attachments
-
-
-
-
-
-
Jim Eubanks
- Posts: 199
- Joined: Mon Jan 07, 2019 6:04 pm
- First Name: Jim
- Last Name: Eubanks
- * REQUIRED* Type and Year of Model Ts owned: 1926 touring, 1927 cpe
- Location: Powell, TN
- MTFCA Number: 49847
- MTFCI Number: 8340
Re: Outside oil line
Even if this is what appears to be a right hand drive Starter, rotation is the other way so it would appear your pick up is backwards?
-
John Warren
- Posts: 1069
- Joined: Sun Jan 06, 2019 12:18 pm
- First Name: John
- Last Name: Warren
- * REQUIRED* Type and Year of Model Ts owned: 14 Roadster, 25 Pickup , 26 Canadian Touring , and a 24-28 TA race car
- Location: Henderson, Nevada
Re: Outside oil line
Cameron, Nice job I am sure it w ill work great.
24-28 TA race car, 26 Canadian touring, 25 Roadster pickup, 14 Roadster, and 11AB Maxwell runabout
Keep it simple and keep a good junk pile if you want to invent something
Keep it simple and keep a good junk pile if you want to invent something
-
Cambin
Topic author - Posts: 46
- Joined: Sun Jan 13, 2019 12:36 pm
- First Name: Cameron
- Last Name: Smythe
- * REQUIRED* Type and Year of Model Ts owned: 1925 Duncan and Fraser 1/2 ton pickup and a 1922 Sydney built steenbhoms tourer
- Location: Warragul Victoria AU
Re: Outside oil line
Take time to think about that john if I crank an engine clock wize and if you look at the hogshead right the out let of my oil line is end close wize I think it’s the correct way
Cam
Cam
-
Cambin
Topic author - Posts: 46
- Joined: Sun Jan 13, 2019 12:36 pm
- First Name: Cameron
- Last Name: Smythe
- * REQUIRED* Type and Year of Model Ts owned: 1925 Duncan and Fraser 1/2 ton pickup and a 1922 Sydney built steenbhoms tourer
- Location: Warragul Victoria AU
Re: Outside oil line
Sorry jim
-
Dennis_Brown
- Posts: 213
- Joined: Wed Jan 09, 2019 10:14 pm
- First Name: Dennis
- Last Name: Brown
- * REQUIRED* Type and Year of Model Ts owned: 1926 Roadster pickup
- Location: Spring Hill Fl
- MTFCA Number: 21458
Re: Outside oil line
Looks correct, the starter hangs on the left from the drivers seat and rotation throws oil over the top toward the top of starter and the picture shows the starter mount holes for the left forward Side .